Render bar un-renders while it renders!

Hi, I am just starting to work with LiveType 2, but have run into a strange problem. On one of my files, as I play thru the timeline and the red line becomes green as the playhead moves, a little ahead on the timeline the green section turns red the the playhead moves. In other words, for every section I render, a corresponding section ahead of that becomes un-rendered. Makes it difficult to get anywhere.
Any advise? Thanks so much, Bob

That just indicates you're using up your RAM for a RAM preview. when you render to a movie that won't happen.
bogiesan

Similar Messages

How to change the bar chart rendering image format in SSRS

Hello all,
I am working with SQL Server 2008 R2 and I have a SSRS bar chart report, when the report got rendered over online or if the take Export (PDF and PPT), the image is in png format always, which is taking too much of time to execute the report in case of large
data.
Can, It be possible that the rendered image is in jpeg format instead of png.
If Yes, please share the appropriate steps to follow:
Thanks in advance
Pankaj Kumar Yadav-

Hi Pankaj067,
According to your description, you want to change the bar chart rendering image format as JPEG format when previewing the report or exporting to a PDF file .
In Reporting Services, the chart rendering image format is PNG by default. It’s a by-design behavior. And it doesn’t open any API for us to change the image type when exporting a chart to a format. So in your scenario, your requirement can’t be achieved
in Reporting Services currently. I would recommend you submit a feature request to Microsoft at this site:
https://connect.microsoft.com/SQLServer. So that we can try to modify and expand the product features based on your needs.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Riddle me this-. Orange Render bar for some clips

I hope my system isn't getting tired and old but I have never had a project where all the clips needs to be rendered. No effects applied or anything. I converted these clips to Apple Pro Res(LT) and I still need to render. When I convert my RED footage, it works fine. But not the MVI files. See picture on this link. The files have same codec, one needs to render but the other doesn't!
http://www.redmoonlight.com/PictsOnWeb/OrangeRender.png
Thanks for you time or any solution you can give.
Things I did: Trash prefs, restart, video scope closed

The orange render bar-
"Indicates effects that exceed your computer’s real-time playback capabilities but are enabled anyway because Unlimited RT is selected in the RT pop-up menu in the Timeline. Unlimited real-time playback lets you play more effects but increases the chances that your sequence will drop frames during playback. This mode is useful for getting a real-time preview of complex effects compositions." - form the manual.
I interpet that it mean it will playback withourt requiring rendering until you apply an effect.
One of your clips is set to "maximum" quality with a higher bitirate than the one set to "Normal" quality. Not sure if that is causeing it.
MtD

Vanishing Render Bar

Hi,
I'm having an issue where the render bar in Premiere Pro CS5.5(latest version) vanishes. Upon loading the project the render bar appears as normal, red, green and yellow bars. But when I try to render a portion of the sequence Premiere Pro begins to render then stops as if it has completed the rendering. This also results in the render bar vanishing.(see pic below) After this Premiere behaves as if the entire project is rendered. Pressing enter or trying to render the entire work area causes Premiere to immediately try and play the sequnce which is obviously choppy due to unrendered effects. I've tried removing all my render files manually and via the Premiere Pro interface, this does not work. I've also tried creating a blank project and importing the sequence I need, this does not work either.
Any help would be greatly appreciated. Thanks

I had the same problem. It first occured when the project settings didn't match the footage I was using. So be sure to use the right project setting for your sequences.
I have just tested it by setting the right project settings for the footage. So perhaps you should check this out.
I am not completely sure, if I found the reason for this bug with the vanishing render bar, but you can give it a try.
Greeting
Nicolas
Message was edited by: Terrador89

I have no render bar?

Hey everyone!
So I'm having quite a bad problem with Premiere Pro CS5. Sometimes when I preview the video for a project in progress, it lags a fair bit. I usually fix this by rendering the work area. But for this particular project, it won't do anything. When I tell it to render work area, it just plays the video. Also, I don't have a red, yellow or green render bar. It's just gray, as if it isn't there. What could be causing this? Can anyone help me? :c
Thanks for reading my post!

I fixed it. The problem was the frames per second in the source video. For some reason, there would be no render bar for videos with 30 frames per second. I converted the videos to 25 frames per second and the render bar came back. Changing the sequence settings to 25 frames per second also fixed the problem. Thanks for the help anyway!

"Blue-Grey" on video render bar..Why??

After I rendered my project I have noticed that there is a blue-grey color on my video render bar. If I put my cursor on the render bar it says that my video is rendered. Then why is it not just Grey?? When I play back my project the parts that have the blue-grey render bar are very unstable and digitized. Why is the project not rendering, and what does the blue-grey render bar mean??
any help or soulutions would be great

1) Because gray means a video clip that does not require rendering
2) Set RT for the Timeline to Safe, the Quality to High and the Frame Rate to Full. Does it still play back unstable on an NTSC video monitor?

Can I get rid of the flashing bar of words while texting? Or even writing this post?

Can I get rid of the flashing bar of words while texting? Or even writing this post?

Settings - general - keyboard - turn off predictive text.

Colorista II showing red render bar in PP CC 2014

I am working a lot with the plugin Colorista II from Red Giant Software. I am using the latest version of PP CC, Nvidia and the plugin. Graphic card is GTX 970.
Everytime I am tweaking with the plugin the render bar turn red. That means no GPU acceleration? From my system or generally the plugin?

hmm shame, that's a mislead in my opinion then. Color correction shall always work that way.
Thanks for reply.

Yellow render bar in Premiere Pro CS6

hey there,
quick specs:
HP Z820, 64GB RAM, NVidia quadro 6000 (alongside with a BlackMagic 3D extreme for monitoring), ext. SAS-RAID, Windows 7 64bit, Adobe PP CS6.
the issue is quite simple from the outside:
any codec i slam into a new sequence gives me yellow (render) bars.
doesn't matter if i customize the sequence or right click "new sequence from clip" (which i assume fits my sequence settings to my clip settings)
the only codec that doesn't give me yellow bars is mpeg2. (really..?!)
to check i turned the CUDA engine OFF - red bars immidiately.
and even with yellow bars (which PP should be able to play back at least i get the choppiest playback sometimes)..
but as you see it shouldn't be a hardware problem - so what am i doing wrong or didn't i get the idea of creating sequences?
any suggestion appreciated.
s.

Harm Millaard wrote:
If the codec you use is not supported in a preset, you get the yellow bar. So what? If it plays fine, then there is nothing to worry about. With AVCHD 1080p/50 and 5.1 AC3 sound you get a yellow bar, so what? It plays fine.
hey harm,
"so what?" is not really a term that i often use. when i encounter a problem, i try to fix it or at least push as far as i can push to get the optimum under the given circumstances. "works anyway" doesn't really cut it for me.
i want to understand why there's the need to render despite the fact
- that all my hardware and software is supposed to eliminate exactly this
- that other companies solved this problem years ago
- that adobe promotes a product that should do the job, but obviously doesn't
and it actually does not playback fine. sometimes (=usually) the playback is choppy, sometimes the playhead jumps back to start without any reason and a few other problems i came across.
i understand that adobe PP is not in the game as long as AVID is for example, but they claim to have a professional product (at least the name suggests it but as far as i am concerned if you really put PP to the test it tends to bend and sometimes to break.
as much as i love dynamic link (main purchase reason) - i just can not run sensitive projects on it. or, before i do i need to understand why these things happen.
you totally don't have to but i hope you understand my position.
s.

Orange render bar on native DV or DVCPRO HD footage in matching timelines

Okay, I've searching and calling people to figure this one out. I've captured DV footage, removed the pulldowns correctly to make it 24p, and I've used easy setup and checked my timeline settings. All correct and matching. So, why are the raw clips dropped onto the timeline presenting me with an orange render bar. This is happening with DVCPRO HD footage too. I don't remember this being an issue until updating to 5.1.3. I upgraded, so I have to downgrade to test my theory.
I have 5.0.4 still installed, so I tried it. Used XML to reopen project in 5.0.4, I have no such problems, no orange render line. What's the deal? Is 5.1.3-5.1.4 have to use core video or something that my graphic card in my old G4 tower can't handle?
Please somebody tell me this is happening to them too. It doesn't occur on my MacBook Pro, just my tower.
PPC G4 1.4Ghz, 1.5Gig RAM Mac OS X (10.4.8)

Sorry, I didn't mention all that I tried. I did dump the prefs, still no use. I'm trying to find 5.1.2 right now, see if it did it. I don't remember an issue under 5.1.1 either.
This is very frustrating because it's supposed to be running natively on the media that FCP runs natively. Even the old versions work better at this. Not a problem if you're on an Intel box with the new stuff. Seems like it's purposely crippled.

Getting red render bar when editing HD multiclips

I'm editing a multiclip music video in Final Cut Pro 6.0.3. The sequence setting matches the size and frame rate of the footage, which is 1920 x 1080, 23.98 fps, using Apple ProRes 422 (HQ).
I have my multiclips all synched and when I put them in to the canvas to begin editing, I get the dreaded red render bar. I have never had this issue before when editing in SD. When I have "Unlimited RealTime" checked I get the yellow/orange bar.
Any advice on how to make this easier and flow faster?? My computer keeps crashing.
and I'm running MacOSX 10.5.2 on a Dual 2.5 GHz G5 with 1.5 GB DDR SDRAM.
Thanks in advance!

2 or 2.5 gigs of ram would help (IIRC, 2.5 is all FCP will utilitze).
We just had a thread about this issue on an iMac. You might want to review it...
http://discussions.apple.com/message.jspa?messageID=9091740#9091740
Where is your media stored and how many streams in your multiclip. How is the media connected...FW400/800/eSata/RAID (internal/external)?
Increased ram may help, but I'm inclined to think you could be maxing out your drive throughput.

Hello i need help for adobe creative cloud...when i launch application adobe cc 2014 for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar for a while and suddenly this application close automatic

hello i need help for adobe creative cloud...when i launch application adobe cc 2014 for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar for a while and suddenly this application close automatic

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

PP CS5 Wants to Render all my AVCHD (MTS Files) - RED RENDER BAR

Help Please,
I have a Panasonic AF100 and shooting in 1920 x 1080 25P (Australia)
When I create a new project with same settings (AVCHD, 1920 x 1080 25 Frames Per Second) and import footage (MTS Files) the entire sequence has a RED bar above each clip. I expected the footage to have Green or Yellow bars unless I apply an effect or transition??
Having to render EVERY clip in my sequence is driving me mad, I have not even applied any effects and just to watch, I need to render every clip..
I am using a Mac 27", 3.2 GHZ, Intel Core i3, 4GB Memory 1333 Mhz DDR3...
Help please, anyone??
thanks in advance

Have you tried this (CS5):
How do I choose the right sequence settings?
http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings
Red, yellow, and green render bars and what they mean
http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html

Question on render bar color

I can't find this in the manual. What is the faded green-grey color signify in the render bar?
thanks, td

If you have Final Cut Pro 6, page III-645 explains the whole deal about the *render status bar* .
If you are running an earlier version, simply drop that term in search field and you'll find the relevant section.
Good luck,
x

The status bar not going while download the app.

The status bar not going while download the app.
I'm bought the bento from App Store, I finished the payment, but the status bar appeared but doesn't show any progress. Strange!!

I dont want to Display the popup, I want to Display in Status Bar as a Error Message.
Like this .
If I put message type 'E' its Displaying popup message , MESSAGE ' Duplicate Condition Types Are Not Possible.' TYPE 'E'.
If I Put messge type 'I' its Displaying in Status Bar .
Regards,
Prathap
Edited by: giri prathap on Sep 13, 2011 12:35 PM

Render bar un-renders while it renders!

Similar Messages

Maybe you are looking for