Render bar | yellow | red | green

If i put a new clip to my sequence it shows me a yellow render bar which actually means, i should regive it without bucking or any problems. But even if i put effects on that clip, or an adjusment layer, the render bar wont get red. And if i render the yellow one, with the full effects on the clip, its not able to play it without bucking. So first i wont get any red render bars, secondly even the yellow is not playing without bucking

http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html
Can you share your computer system specs, Premiere version, footage source format? Do you have GPU acceleration enabled? There are many factors affecting playback smoothness. Does the sequence preset match the footage? Mismatched frame rates are problematic for instance.
Thanks
Jeff Pulera
Safe Harbor Computers

Similar Messages

Colorista II showing red render bar in PP CC 2014

I am working a lot with the plugin Colorista II from Red Giant Software. I am using the latest version of PP CC, Nvidia and the plugin. Graphic card is GTX 970.
Everytime I am tweaking with the plugin the render bar turn red. That means no GPU acceleration? From my system or generally the plugin?

hmm shame, that's a mislead in my opinion then. Color correction shall always work that way.
Thanks for reply.

How do I make the red-green-yellow icons and the text in window title bars larger?

The title text is a little too small to just see - I have to concentrate on it to read it - and I can't tell the red-green-yellow icons apart without staring at them. Yes, my sight is quite poor; I'm already sitting as close as I can.

sorry about the slang display portal, i just mean the entire screen, like a magnifying glass. There is probably a keystroke, and it's probally all in here:
I do agree it's a concern, as I have a torn retina, and my eye gets strained quickly.

PP CS5 Wants to Render all my AVCHD (MTS Files) - RED RENDER BAR

Help Please,
I have a Panasonic AF100 and shooting in 1920 x 1080 25P (Australia)
When I create a new project with same settings (AVCHD, 1920 x 1080 25 Frames Per Second) and import footage (MTS Files) the entire sequence has a RED bar above each clip. I expected the footage to have Green or Yellow bars unless I apply an effect or transition??
Having to render EVERY clip in my sequence is driving me mad, I have not even applied any effects and just to watch, I need to render every clip..
I am using a Mac 27", 3.2 GHZ, Intel Core i3, 4GB Memory 1333 Mhz DDR3...
Help please, anyone??
thanks in advance

Have you tried this (CS5):
How do I choose the right sequence settings?
http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings
Red, yellow, and green render bars and what they mean
http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html

I have a Mac Air. I use the mail application all the time.. The red, yellow, and green buttons disappeared at the top of screen... now i have to force quit mail.. how do it get the buttons back?

I have a Mac Air. I use the mail application al the time. THe red, yellow, and green buttons disappeard. i have to force-quit now to close mail.. How do i get the buttons back? thanks.

Mail window may be in the Full Screen mode.
Move the mouse pointer to the top right corner of the Mail window and hold it there.
Menu bar should drop down and click the blue double arrow icon.
Full Screen toggle shortcut: control + command + F

No red, yellow or green buttons (close, minimise, maximise) in iTunes 10.4?

I've just downloaded iTunes 10.4 for mac and the red, yellow and green buttons (close, minimise, maximise) that sit in the top left corner are no longer there. It also looks like part of the top of iTunes has been cut off. Is this the norm now? How do I get them back?

It sounds to me like the iTunes toolbar is up under the Mac OS X menu bar. Try selecting the "Close Window" command from the File menu in ITunes, then open a new window by choosing "iTunes" under the Windows menu. If that doesn't fix the problem, try changing the resolution of your Mac's screen (Displays system preference) to a lower resolution, then back. That may get the iTunes window to reappear.
If not, open the Script Editor application, paste in the following text and click the "Run" button:
tell application "Finder"
set {d1, d2, d3, d4} to (get bounds of window of desktop)
end tell
tell application "iTunes"
set margins to {d1 + 10, d2 + 54, d3 - 10, d4 - 148}
set bounds of window 1 to margins
end tell
That should restore the window properly, though I haven't tried that script with recent versions of Mac OS X.
Hope this helps.

Yellow render bar in Premiere Pro CS6

hey there,
quick specs:
HP Z820, 64GB RAM, NVidia quadro 6000 (alongside with a BlackMagic 3D extreme for monitoring), ext. SAS-RAID, Windows 7 64bit, Adobe PP CS6.
the issue is quite simple from the outside:
any codec i slam into a new sequence gives me yellow (render) bars.
doesn't matter if i customize the sequence or right click "new sequence from clip" (which i assume fits my sequence settings to my clip settings)
the only codec that doesn't give me yellow bars is mpeg2. (really..?!)
to check i turned the CUDA engine OFF - red bars immidiately.
and even with yellow bars (which PP should be able to play back at least i get the choppiest playback sometimes)..
but as you see it shouldn't be a hardware problem - so what am i doing wrong or didn't i get the idea of creating sequences?
any suggestion appreciated.
s.

Harm Millaard wrote:
If the codec you use is not supported in a preset, you get the yellow bar. So what? If it plays fine, then there is nothing to worry about. With AVCHD 1080p/50 and 5.1 AC3 sound you get a yellow bar, so what? It plays fine.
hey harm,
"so what?" is not really a term that i often use. when i encounter a problem, i try to fix it or at least push as far as i can push to get the optimum under the given circumstances. "works anyway" doesn't really cut it for me.
i want to understand why there's the need to render despite the fact
- that all my hardware and software is supposed to eliminate exactly this
- that other companies solved this problem years ago
- that adobe promotes a product that should do the job, but obviously doesn't
and it actually does not playback fine. sometimes (=usually) the playback is choppy, sometimes the playhead jumps back to start without any reason and a few other problems i came across.
i understand that adobe PP is not in the game as long as AVID is for example, but they claim to have a professional product (at least the name suggests it but as far as i am concerned if you really put PP to the test it tends to bend and sometimes to break.
as much as i love dynamic link (main purchase reason) - i just can not run sensitive projects on it. or, before i do i need to understand why these things happen.
you totally don't have to but i hope you understand my position.
s.

Getting red render bar when editing HD multiclips

I'm editing a multiclip music video in Final Cut Pro 6.0.3. The sequence setting matches the size and frame rate of the footage, which is 1920 x 1080, 23.98 fps, using Apple ProRes 422 (HQ).
I have my multiclips all synched and when I put them in to the canvas to begin editing, I get the dreaded red render bar. I have never had this issue before when editing in SD. When I have "Unlimited RealTime" checked I get the yellow/orange bar.
Any advice on how to make this easier and flow faster?? My computer keeps crashing.
and I'm running MacOSX 10.5.2 on a Dual 2.5 GHz G5 with 1.5 GB DDR SDRAM.
Thanks in advance!

2 or 2.5 gigs of ram would help (IIRC, 2.5 is all FCP will utilitze).
We just had a thread about this issue on an iMac. You might want to review it...
http://discussions.apple.com/message.jspa?messageID=9091740#9091740
Where is your media stored and how many streams in your multiclip. How is the media connected...FW400/800/eSata/RAID (internal/external)?
Increased ram may help, but I'm inclined to think you could be maxing out your drive throughput.

The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari. I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows. Does anyone know how to get those buttons back

The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari. I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows between different applications. Does anyone know how to get those buttons back? I guess I could just switch betwen appliations, but I am used to doing it the other way.

You're welcome
You had Safari in full screen mode.

I seem to have lost the red, yellow and green dots that are in the upper left hand corner that close or minimize the page.

I seem to have lost the red, green, and yellow dots that are in the upper left hand corner that close or minimize the page. How can I get them back?

You may have to try a general OS X troubleshooting process to see if the issue goes away by doing this...
Have you tried: starting the computer in SafeBoot mode, with shift key held down; a login screen should appear after a time, and then the regular desktop. At this point, locate Disk Utility in utilities folder, and run 'repair disk permissions' on the startup volume, usually the name given the hard disk drive as it appears on desktop. After Disk Utility is finished the permissions repair, restart the computer normally.
...The iTunes player has free support only through the duration of the hardware product's complementary or AppleCare extended plan coverages, so though you can download a newer version, that is not the same as free support for an issue. However, the iTunes Store or App Store has a different factor for their product.
http://www.apple.com/support/itunes/
There is an iTunes area in Apple Support Community discussions for more topics like this; except for when they involve a hardware product where an OS X is involved. If your computer is NOT a powerPC (an 'intel'-mac) the topic would more naturally need to be posted where that hardware and later supported OS X version topics get seen. So that is why one asks 'on what Mac running what version...' instead of writing four paragraphs in a wide angle reply. The details about your iMac and the OS X say more; without them, more questions arise.
Good luck & happy computing!

I lost the round red, yellow, and green buttons in Safari. How do I get them back?

I lost the round red, yellow, and green buttons in the upper left hand corner in Safari. Does anyone know how to get them back?

Has Safari taken up the entire screen? If so, then that's 'Full Screen Mode', which you can toggle on or off with Control+Command+F.

Red green yellow buttons in iTunes 10

OK, I upgraded to iTunes 10 awhile back and noticed the buttons in upper left corner of window are gray and not red green yellow. I have searched the web for fixes and came up with two
defaults write com.apple.iTunes full-window -1
defaults write com.apple.iTunes full-window -int -1
These work to make the vertical to horizontal, but the color is still gone. What is the terminal entry for getting the color buttons back. Not really concerned with the icons being color at this time but would like the corner buttons color.
Thanks

ok...upon further research found answer to this question myself.
http://answers.yahoo.com/question/index?qid=20091101203328AAUf8py
thanks for listening..

Red green yellow - whats the logic in it

hi gurus,
In PFCG once we get into authorization and display, some are in red and some in yellow and green. It is based on maintained, partially ,unmaintained authorizations. But, when a red changes to green and yellow change to green and green change to red. Hope u understood my question. pls help me in this.
With regards,
Livi

Dear Livingston,
The logic behind the traffic signals in the Change Authorization Data page is not as explained prior.
The simple explanations are provided in the help legend in the same page.
To further elaborate, when you are creating a role with a set of transactions being added to the role from the SAP Menu in the Menu tab of PFCG, SAP organizes the set of Authorization Objects and the Authorization Values as pre-defined for the transactions that is added.
If certain transactions are left with open fields in the SAP definition these fields appear unmaintained in the Change Authorization Data page. It is the responsibility of the BASIS Consultant of the Security Consultant to fill the unmaintained fields, not just by making them red to green or yellow to green by clicking on the buttons but by finding the correct values that needs to be assigned as authorizations to the role in turn to the user.
For example, if you have added a functional transaction to a role - a set of authorization objects depending on the dependency of the transaction are added to the role. The organizational levels which are the base of the functional working of the business in SAP are added without the specific value for the organizational value being added, as a BASIS consultant we need to analyze the role with the help of the corresponding functional consultant to identify the activity of the role and assign only the needed Organization Values. This is the situation in which you find the Authorization fields to be in RED color.
Similar to the above mentioned case when an authorization object field is not completed with an activity for example Read, Write, Display etc access - you find the field to be Yellow when you assign a particular activity to the field the same turns to maintained level and the representation is shown green.
The objects which are by default maintained is shown green, to generate a role completely and to effectively use the authorizations assigned we need to completely maintain the role, i.e all the fields needs to be maintained.
By simply changing the status of the field from red to green or yellow to green you are giving complete authorizations to the corresponding activity - which is not recommended in certain categories.
Hope the explanation is clear - let me know your response.
Thank you
Regards,
Vineeth

Start up and stuck with the flashing color (red green blue yellow...)

I just bought Macbook pro(My first time with Mac product) today, and when i unbox the MBP it was have a good start everything is ok, than I test the DVD drive to make sure it work or not, than i put the VCD to it. it was stuck (with the flashing color). than i dont'know what to do. I press the shutdown button around 10s the pc is shutdown...I open it again and eject the VCD, than I was stuck with flashing color (red green blue yellow...) i have try to restart many time buy pressing the button but still the same. than i keep it away for about 1hour than I open it again It was WORKING AGAIN the same as I first started, than I restart, but the same problem happen again (flashing color (red green blue yellow...).
1. I have tried to boot from DVD that come with the MBP holding C but nothing happen
2. I have tried to reset PRAM (Command-Option-P-R) not work
So what wrong with that?
Could anyone help me to fix this out?
Thank you

Solida wrote:
the flashing is the Macbook pro screen it Flashing Loop, sometime red, than suddenly change to green than yellow than loop again and again.
Notice when it first start up I see APPLE LOGO than the waiting animation round. than the random screen flashing color is happened.
Three options:
1. Call AppleCare.
2. Go to an Apple Store.
3. Go to an Apple Authorized Service Provider (AASP)

Why when I fully expand the screen contents do I lose the red,yellow,and green options at the top left

why when i fully expand my screen contents do i lose the red, yellow, and green buttons at the top left used to close, expand, and minimize

That's just the way it is in full screen mode. You need to come out of FS to see the dots again.

Render bar | yellow | red | green

Similar Messages

Maybe you are looking for