Render=Crash

It seems I've uncovered another bug... When rendering (AME or direct export from PPRO CS6), the app crashes. No certain point, although usually in the second pass (H.264).
From the Event Viewer:
Faulting application name: Adobe Media Encoder.exe, version: 6.0.3.1, time stamp: 0x50575647
Faulting module name: mc_enc_avc.dll, version: 9.1.7.3633, time stamp: 0x50292555Exception code: 0xc0000005Fault offset: 0x00000000000dfb74Faulting process id: 0x1430Faulting application start time: 0x01ce17b61ea415b9Faulting application path: C:\Program Files\Adobe\Adobe Media Encoder CS6\Adobe Media Encoder.exeFaulting module path: C:\Program Files\Adobe\Adobe Media Encoder CS6\mc_enc_avc.dllReport Id: 7a33b540-83b0-11e2-b7af-00224d8921b1
This happens regardless of having GPU acceleration on. I've been having a bug with that too, but that's another story.

Sadly, this issue persists in version CC. I'm attempting an H.264 render and at 38% it freezes and error reporting pops up. As an alternative, I attempted to encode a WMV and it crashed at 19%. This is unacceptable.
The error messages follow.
H.264:
Fault bucket 120193513, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: -338828995
Problem signature:
P1: Adobe Premiere Pro.exe
P2: 7.0.1.105
P3: 51cbdef8
P4: mc_enc_avc.dll
P5: 9.6.9.1178
P6: 51af38c3
P7: c0000005
P8: 00000000000e2f58
WMV:
Faulting application name: Adobe Premiere Pro.exe, version: 7.0.1.105, time stamp: 0x51cbdef8
Faulting module name: ImageRenderer.dll, version: 7.0.1.105, time stamp: 0x51cb961e
Exception code: 0xc0000005
Fault offset: 0x000000000004964a
Faulting process id: 0x1fb4
Faulting application start time: 0x01cec52e54597a87
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC\Adobe Premiere Pro.exe
Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC\ImageRenderer.dll
Report Id: 7a416b73-3122-11e3-83fb-00224d8921b1
Thanks for any light you may shed on the situation.

Similar Messages

Render Crashing in AE CC 12.2.0.52

For some reason every time I try to render with NONE compression the render crashes and I get the following disclaimer. See Attached.
I have trouble shot this the best i can. From eliminating files in my project to finally creating a new project and simply animating a square around the frame to see if it was my project. It crashed and I got the same disclaimer. Any thoughts?

> 1. You are right the PNGs would definitely be useful. However, to best of my knowledge I believe you cannot get audio with pngs sequence files.
I did not suggest PNG sequences.
I suggested the PNG video codec in a QuickTime container.
>
2. My broadcast clients like ESPN, request the none compression because it will be the cleanest version for final cut and avid editing along with having the audio and embedded alphas.
Once their editors complete their final version they may compress them in various formats for on-air and non-on-air uses. Hence we try to minimize compressing a already compressed movie.
This is based on a misunderstanding.
ZERO information is lost when encoding using a lossless codec. That's why they're called "lossless". Animation and PNG are examples of lossless codecs. You could compress and uncompress these files through an infinite number of generations and not lose a single iota of image information.
Both PNG and Animation include alpha channels. You can also have audio in a QuickTime movie made with these video codecs.

After Effects Minimized Render Crash?

I am experiencing a very annoying issue pertaining to After Effects CS 5.5. I recently purchased the product (Production Premium CS5) and installed it on PC only to encounter a strange error. Whenever I do a preview render (pressing 0) and then minimize I then see the number of frames being rendered in the minimized window (this is normal). However, upon clicking the minimized window to reopen it After Effects crashes immediately with the error: After Effects error: "Crash in Progress.Lastlogged message was : <4924><ImporterMPEG><1>Error_printf:No Video Available". After effects gives me the option to save my work and notifies me to contact the Adobe Technical Support Center. I recently purchased this product I am disappointed that I cannot minimize the program while rendering, the program did not do this immediately, it started doing this a couple of days after I started using it.
I have already tried uninstalling after effects and reinstalling and i get the same error everytime.
My PC Specs:
8GB RAM
AMD 1100T Sixcore 3.3 Ghz processor
GTX 275 graphics card performance edition
Is there something I'm missing? Please Help me resolve this issue, After Effects is a good product.

It usually crashes with this log message:
"Crash in Progress.Lastlogged message was : <4924><ImporterMPEG><1>Error_printf:No Video Available"
I never changed anything with my system when this error occurred nor did I install a new driver, I didn't even install a new program or do any system changes.
I have OpenGL disabled but I get this crash with it on or off. I have even tried rendering a project where all I had was a square with keyframed position but I still get the same rendering crash/error when I minimize the window, therefore I don't think its an effect causing it or OpenGL.
Any Ideas?

Export / render crashes premiere

I tried to export 3 times keeps crashing at 81%. Just tried to render work area and crashed at 93%. (rendering stops, but premiere not consuming CPU cycles). Its canon 7d footage. There are 4 video layers. Its crashing in a sequence that has nested video inside nested video, with track matte and a fair few effect (but this nested sequence is also at the beginning of the movie, and renders fine there.

Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0

Curious PP CS6 render crash

I've been running PP CS6 almost without incident since August. Yesterday I was working on a short collection of excerpts to post on vimeo, all of it was material that I had edited without any issues in the past, shot on AVCHD last march. After a CC pass I like to render all the effects in the sequence to do few playback reviews, the effects render started crashing, I thought it was pretty odd because there is a total of maybe 4 transition effects in the entire sequence beyond the CC on about 1/2 of the clips in the 2 minute sequence. After several hours of trying different things I think I isolated it to a cross dissolve into and out of a short piece of aerial footage. I tried transcoding the offending clip (but I didn't go so far as transcoding the clips on either side). After spending way too much time trying to diagnose the problem I ended up faking the transition effect with keyframing opacity in and out of the clip, and then it rendered flawlessly!
SYSTEM:
-PP CS6 updated
-win7 64 updated
-ASUS P6t mb
-16gb ram
-gtx470 gpu
-The original media is on an eSATA hdd, I cloned copies of the media to an internal drive, no joy.
-Rebuilt the original sequence in a new sequence, no joy.
The only thing slightly "hinky" in this is that I am using a custom 2:35 aspect sequence, 1280X535 24p to be exact.

I took your suggestion and created a new sequence preset, 1280 x 536 (536 being a multiple of 8), copied and pasted the material from the crashy 1280 x 535 sequence, added the 2 cross dissolves that seemed to be causing the problems before and everything now renders without a hiccup.
Interesting.

Render Crashing with New Update

Well, last night I rendered a project with zero issues.
Today I updated via CC App and some hell broke loose.
First, when I opened CC 2014 (had used it many times before) it suddenly thinks I was using a trial version???? Even though I am signed in. Nice bug Adobe.
So I followed the prompts and it was magically linked again.
Then, I render out the exact same project with only minor keyframe timing adjustments. After it gets a a bit done, AE freezes and never recovers. (crashed one of those times) It has done this three times in a row now, even after restarts, and memory dumps.
Is anyone else having issues rendering? I know each system is different, but my point is that nothing changed except for timing keyframes which would have ZERO to do with this issue.
Thanks for any insight.
- Will

It looks like I got it to render past where it stopped before. I unchecked "Render Multiple Frames Simultaneously." Not sure why that would stop allowing it to render without freezing.
I did notice that in the activity manager the RAM was used around 31GB out of 32GB, yet I have the AE preferences set to save 4 GB of RAM for other applications.....

Render crash in Premiere Pro CC Windows 8.1

When I try to render 3 minutes of video with Premiere Pro CC with Windows 8.1 it says "Insufficient memory" and close program.
I set optimizes performance to memory (and not CPU)
I set the maximum virtual memory on Windows.
My computer is 8 core and it has 8Gb RAM (6 dedicated to Premiere)
What have I to do ?

Please monitor memory usage in Task Manager while encoding. Does it ever get near the top of the graph?
The "Insufficient Memory" error is sometimes a red herring.
Have you tried both export paths? In the Export Settings dialog, the Export button (a.k.a., in-process encoding) and the Queue button (which queues the job to AME).
If you have GPU acceleration enabled, please set it to Software Only and try exporting. (In AME, as of CC7.1, you can now change the Renderer setting via a control in the bottom right corner of the Queue panel; in prior versions, the setting in Premiere Pro controlled AME's behavior in this regard.)

All Adobe Products Render Crash!

I have a problem with Adobe Media Encoder, After Effects, and Premiere Pro (All CS6) when rendering. I get around the halfway mark on any length of video (From 2 to 20 minutes I have tried) and it will crash, and present me with this error
The details are:
Files that help describe the problem:
C:\Users\XiDuel\AppData\Local\Temp\WERD75F.tmp.WERInternalMetadata.xml
C:\Users\XiDuel\AppData\Local\Temp\WERF0C9.tmp.appcompat.txt
C:\Users\XiDuel\AppData\Local\Temp\WERF80A.tmp.mdmp
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
No other applications crash when this happens, except the product that is rendering. I have tried checking 'Use Previews' but this does not work
Any idea on how to fix this without doing a full reinstall (if even that would fix it?)
Running on Win 7 64bit
3570k @4.5Ghz
16GB Corsair Vengence
EVGA GTX 460 1GB
Thanks

Waht version of the software are you trying to use? And the error seems pretty self-explanatory...

RENDER IN H264 CRASH .... BUT NOT FROM THE FIRST INSTALLATION

After a lot of uses, the export of a 4min video clip my adobe cs6 installation crashes when i chose H264 but do well with the same as project rendering (my material is MOV from a CANON 70D). I reinstall the whole O.S. WINDOWS 7 64 and the full ADOBE CREATIVE SUITE CS6 and the upgrade from internet. I use QT 7.7.5 full version. Can someone help me ? I use a i7 3770k with nvidia gtx 470 with CUDA acceleration select in premiere pro. Also if I use AME I have the same problem. (excuse for my bad english)

I'm having exactly the same issue this last year.
My pc:
i7 3770
GTX 570
16GB RAM
120GB SDD with the Adobe Suite Installed.
1TB HDD
I have 2 years with this pc and at the beginning i didn't experience any issue with rendering of any kind, but this last year i can't render any video on H.264 or any compressed codec because at the middle of the rendering the render crashes, or the program, or even the pc crashes giving me a Blue Screen. It just renders h.264 when is a really short video without too much editing, but the most times i end rendering in AVI because i dind't have any other option and i don't like AVI too much because it takes a lot of HDD Space.
This happens on every editing or rendering program, like Premiere, AE and even on Adobe Media Encoder.
I've been searching for months and have not found anything that helps me with this problem yet, the only approaching i've found is that it would be a Overheat Problem with the CPU, because my CPU reach the max temperature every time i render, but i removed all the dust in the case and fans and left them clean, and the problem still persists and the CPU temperature didn't change that much. The last thing i'll do about this is to buy 2 more fans for my case and try another CPU Fan instead of the standard.
I hope this will help you, i'll be following this thread.
Btw, my english isn't good too. (Spanish is my native language)

Premiere elements keep crashing with rendering and mid editing!

Hey
I have used adobe premiere elements 10 for a little over a month now. But recently pre began to crash then I was rendering a video!
I began searching on "Adobe premiere elements 10 rendering crash", but didn't find a answer. But, I notices that some people had the problem with render crash when the process bar reached 27%, I tried rendering two times in a row, and notices that my rendering where crashing at 31%!
I have really no clue what the problem could be!
4g ram
3,20ghz cpu intel
64bit

Also see this article on PrE crashing, or hanging: http://forums.adobe.com/thread/792580?tstart=0
It starts with a checklist for PrE, then goes into detail on tuning up one's system and OS, and then goes into troubleshooting problems, with links to other articles, and also tools to help troubleshoot the problem(s). The first part is pretty easy, and then things pick up in "degree of difficulty," as you progress, ending with The Case of the Unexplained.
Good luck,
Hunt

Having trouble with AE crashing on project save

In the past few days, I have had problems with AE locking up while trying to save a project. The problem seems to be random, as I can save several times in a row, then at some point I will try to save, get the spinning beachball, then wait a few minutes before I get an error message:
After Effects error: writing to file "AEtemp-29241" - disk error (I/O error; bad media) (-36).
As it looked like a disk error, I moved all of my files to another local volume, but got the same results. The same thing happens with Save As, no matter where I save the file. We also tried making a new project file and bringing in the elements from the older version, in case it might be a corrupt project file. No luck. Also deleted and re-created the AE prefs.
So having eliminated the source disk and the target disk as part of the problem, I thought it might be a problem with a source clip. I went back to the original Quicktime outputs from the Avid (the clips are 1920x1080 DNx 220) and re-rendered them as Animation, then replaced the footage in the comp.
After doing this, and continuing to work on the project for a while, my next render crashed with the message:
After Effects error: internal verification failure, sorry! {unexpected match name searched for in group}, followed by:
After Effects error: internal verification failure, sorry! {PF_GetFloatingPointColorFromColorDef() called on non-PF_Param_COLOR} (25::249)
The problem started when I added the Magic Bullet Look plugins to the workstation. I bought Magic Bullet Suite 2008 last week and ran some tests, everything seemed OK. But other projects on the same machine seem to be fine. This is the first project to use MB Look or any other MB plugin. Unfortunately, the project was designed around using the Look plugins, so I can't just ignore them and use something else.
Finally, I tried moving the project to another workstation, deleting the plugins from the previous station and installing them on the new one. The problems follow the project even to a different station.
Has anyone seen anything like this?
Thanks in advance
Specs: Mac Pro 8-core 2.88 GHz
14 GB RAM
OS 10.5.4
QT 7.5.5
AE 8.0.2
Radeon HD 2600 XT w/ ROM ver 113-B1480A-252, EFI driver 01.00.252
AE multiprocessors capped at 6

>PF_GetFloatingPointColorFromColorDef() called on non-PF_Param_COLOR
I think the answer is there. In English: the internal color processing (PF) was unable to determine the color values from an external processing unit (non-PF), which is Looks Builder. It certainly is a problem with how Looks is processing the pixels using OpenGL. basically at some point it simply returns garbage to AE. The question would be: Can you find another workstation with another (non-ATI) graphics card, or use Bootcamp to e.g. launch a Windows version? I don't think there's another permanent solution to this, as apparently something goes wrong with specific pixel shader operations. These issues would have to be fixed in the plugin directly or by a driver update from ATI. I'd definitely contact RG's support on the matter. Refer to me and tell them I send you. They may be kind enough to fix you up with a Windows serial if necessary...
Mylenium

FCPX crashes after update to 10.0.5

Hi,
I updated FCPX yesterday from 10.0.3 to 10.0.5. I could continue working in the open project. But when I tried to open another project today, FCPX crashed every time. Now, FCPX starts, loads all projects and events and when I see the projects' overview it crashes. I cannot do anything inside the program.
I replaced all projects with their backups and renamed the old ones CurrentProject_old....
It didnt work.
I tried to regenerate the old FCP version with time machine, but that didnt work either. I work on a Mac Pro (2x2.4Ghz Quadcore). I would be perfectly fine to reset the status before the update. Is there any way to do so? Or any way to make the program running?
I contacted the Apple support, but someone of you might have the same problem or even better an idea for the solution.
Since I need the program for work I would be very grateful for support.
Best
Johannes

I render because it makes playback better.
Things are stable now. I've deleted the still image that was causing a render crash. I've opened the image with Photoshop, resaved, and reimported. I've also redone the Motion project that was giving FCP a problem loading.
Now my project renders and plays. Next I'll see if it will export.
Ross Hunter

Can't EXPORT or RENDER in PREM CC!! "Error compiling movie. Unknown Error."

I am using PMW200 MXF files alongside 5D MKiii files - I finished the edit and went to render/export and it won't let me do either! I can't get the edit out of the software and I have a deadline in an hour.
I only bought the software today (have been using the trial version and I am just coming from FCP 7 - I get this error:
"Error compiling movie. Unknown Error."

Hello Bill
The Adobe KB Article (http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering -or.html ) does not answer the question asked, because the end of the error message is "Unknown error" which is not listed in this article.
I often encouter this error which is a RANDOM error which occurs only with pictures (4256x2832 .jpg or more when I use panoramic pictures with more than 50 MPx) but never with video (1920x1080 HD .m2ts) from my camcorder. The only way I found to do a complete render is :
- save and close the project without editing it,
- close Adobe Premiere Pro (CS6 or CC, same error),
- reopen Premiere Pro and reload the project,
- resume the render.
If I render WITHOUT Mercury Playback Engine : all is perfect, no error but the render needs very much more time.
My own conclusion : this render crash might be due to VRAM oveflooded during render with Mercury Playback Engine (this might be checked and monitored with the freeware GPU-Z).
My GPU is GTX 570 with 1280 MB VRAM and the render are only full HD (H.264 1920x1080i).
If you have a solution except remove the GPU and purchase a GTX 770 OC 4 GB VRAM, I am waiting for it.
My actual system :
- CPU Intel core i7 970 (6 cores, overeclocked to 3,9 GHz),
- MoBo : Intel DX58SO2,
- RAM : 24 GB,
- GPU GTX570 with VRAM 1280MB (Nvidia driver allways up-to-date),
- HDD : RAID 10 with four WD 1002FAEX (7200 tpm, 64 MB cache),
- OS W7 64 SP1, 64 bits (allways updated)
Regards
Jacques

Mac freezes and askes to restart when I render in FCP

I am new to forums but Im in need of some good help. I am trying to create a powerpoint type of video through FCP using imotion videos I've created. The clip is no longer than 5 minutes long and only has one song attatched to it. It has around 12 clips from motion. I was able to render no problems when it only had closer to 6 and 8 but now the mac stops at about 46% completed render and gives me a message that I need to press the power button to restart and nothing works until I do so..Its equivelent to the blue screen of death . Anybody have any ideas?
Message was edited by: juniorferg

My first guess is there is a corrupt clip where the render crashes.
Try taking them all off line then bring them on one by one paying particular attention to the one around the 46% mark of the timeline.
x

HUGE JPEGs crashing FCP

Ok, I'll start off by admitting I made a nubie mistake scanning photos in at exorbitant PPIs resulting in TIFFs that were hovering around 1GB, yes that GIG, and the largest file being 1.58GB. I've since gone through, and exported them to JPEGs resulting in file sizes about 10% the originals. However, that largest file is still giving FCP problems. Most other jpegs, from 2.7MB to 65.7MB results in a green render bar under Unlimited RT on my 2.16 Core Duo MBP with 2GB of RAM. Now when I go over that, with the 3 files that are 77.3, 86.6, and 115.8MB, the images get an orange render bar and result in crashing FCP. I read in a previous thread that it was a memory issue, and that was confirmed when I went to play one of the images in the Viewer and I get Error:Out of Memory. So I jacked the memory, all of it. Application was always listed as 100%, but now I have Still Cache also set to 100% and Disk set to 10,000K and RAM at 1,000K, but this still hasn't fixed my issue. I've tried every way I know of to render this image, and they all quit FCP. Before I raised the memory, just placing the file in the timeline would cause a crash, so at least now it gets past that. If I let it auto render, crash. If I do it manually, crash. If I make a new sequence like David suggest in a previous thread, you better believe it crashes. The interesting thing is despite raising FCP's memory usage, Activity Monitor still shows 1.04GB of free RAM, so if FCP is Out of Memory, why doesn't it just use up that 1+GB? Does anyone know why FCP can't play with such large files?
I guess I'll just need to recompress the few images again, but it's VERY annoying. At least I'm not trying to work with the 1.5GB image.
-Brian
By the way, I am on Final Cut 5.1.4.

You can reduce the cache levels and history states in Photoshop's memory preferences. This will buy back some memory. You should quit and restart Photoshop after each major image resize. This will also keep the app from building up too much cache.
I'll assume these are PSB format, rather than PSD. PSB's don't work the same as PSD's with scratch disk. You may need a separate scratch disk if you keep getting errors. Designate your fastest largest drive to do this.
You really need to get them down to around 1000x1000 pixels to be truly fast in FCP.
Don't forget that Photoshop has a new tool called Image Processor under File/Scripts/ that can size documents without really having to rasterize them. It works much faster than opening the file then running a resize. But be careful to just run 1 or 2 at a time, since I've found that it doesn't do a great job at purging the memory after each image. You will run out of memory quickly if you have too many files at once.
Remember to quit and restart Photoshop, or even you machine if it really slows to a crawl. These are signs your hard drive is full and relaunch and reboot will clear all the temp files from Photoshop's scratch disk.

Render=Crash

Similar Messages

Maybe you are looking for