Render doesn't play in apple tv

First post ever with Apple, any help would be greatly appreciated. I run Mavericks and Final Cut X linked to Apple TV. Never had these issues till I upgraded to Mavericks (so it seems).
Question is...when I render project to Apple Devices, it renders great and is stored to my iTunes library. When I go to play it through Apple TV it only plays audio of project with no video, even though I rendered it audio and video. Am I missing anything like format etc? Also, after I move the files to permanent storage it seems to corrupt the file in iTunes Library and I have to go searching for the files. Any insight for me. Thanks again!

I'm exploring the rendering options like Mastering vs. Publishing to see if that makes a difference to Apple TV playback....just seems like a weird glitch. Sometimes, I delete the file from iTunes and then re-render and it shows up on Apple TV, like I said, glitchy. Never had issues until I switched to Mavericks. I go with Final Cut recommended settings as I know enough to be dangerous but not enough to try different settings...if that makes sense.

Similar Messages

New messages sound doesn't play in Apple Mail 4.5

the new messages sound doesn't play in my Apple Mail v.4.5

Tried Apple Support many times, they just play dumb.. Try this application. I disabled notification on Mail and let this one does and it actually uses Mail sound files.
http://www.macupdate.com/app/mac/32744/herald

Slow mo video from iPhone 6 plus is not playing on Apple TV?

I made a slow motion video with my iPhone 6 Plus. But it doesn't play on Apple TV. Air dropped the video to my wifes iPhone 5S and he played it well on Apple TV. What can that be?

FWIW slo-mo video plays for me.
The following article(s) may help you.
AirPlay Mirroring
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

If iTunes will play it Apple TV will play it? Doesn't seem so

Some of my .mp4 movies wont sync over or play on apple tv. I can play them in iTunes and Quicktime.. What gives?

Just some extra info for you from my experience. I
had some videos converted for iPod that I still had
original DV versions of. So, I made a new copy using
the AppleTV setting. The size wasn't that much
bigger thant he iPod version, but the quality was far
superior on my TV.
Just sharing . . . for whatever it's worth.
Super
This is exactly the type of experiential knowledge we need to be sharing on this message board. Thanks. I guess its worth the wait to use the AppleTV export feature on QuickTime Pro.
Separately, it would be nice if there was some agent that ran on this message board that contacted the thread's originator what category (out of a list of say 25 topics) he would like to add his/her message. There is so much repetition.

Hi guys,my iphon 4 doesn't play most of the

Hi guys!
My iphone 4 doesn't play most of the music what are in the music library on the pc,what is syncronized by iTunes.this problem came with iOS 5.,but previously the phone had different other issues,so it has never worked as it promised by Apple.I have tryed every solution what I saw on the communiti forums,but nothing works permanently,the solutions are only temporary.I went many times to the Apple store to fix the problems but they could not solve the problems.They gave me a replacement handset,which solved the fast battery drain issue,so the hardware seems OK!!!! To be an iphone owner is a struggeling, I always recive different bugs from Apple,like other iphone users.This behaving made the Apple different fom the others,as they wanted.Job done! That is why I ended up at Nokia N8,because it plays every single tune what are in same music library what used by iTunes, no lugs,no skips, no mess up,it has FM radio,free sat-nav,12Mp brilliant camera,working bluethoot,no need online connection for everithing! I find the solution for the iphone problems,this way my iphone turned to a secondary phone,I will use as an emergency phone ,this is not a smartphone!

Got it replaced last week. Turns out the dock was defective.

ITunes doesn't play.... what's up??

Ok, this is weird but I'm afraid the answer might be both obvious and tragic. All of a sudden, iTunes quit working completely, except that everything about it looks perfectly normal. It's not frozen, I can click on my playlists, I can drag the time bar and everything else, but that it doesn't play music, which is sort of an important part of iTunes. The play button does nothing other than briefly turn blue. It doesn't switch to the pause button and the time doesn't start to run. The space bar and the play tab in the menu do nothing either.
I've tried installing the latest version of iTunes, I'm now using 6.0.4. The upgrade didin't help. Everything had been fine until all of a sudden yesterday I couldn't get it to work. Now, the only problem I can think of is something sort of badand scary.... the disk utility has been telling me for a year now that my hard drive "has reported a fatal error." But so far everything has been working fine. Is there something about a fatal error that could keep the play button from working? I know fatal errors are serious, but this hasn't been causing any problems.... I've just been holding my breath for a year, and backing up a lot.
Are there any suggestions anybody can make, other than getting a new iBook, which is a sweet idea but out of the question at the moment?

Since you installed a new version, it's unlikely the iTunes application is the culprit.
The only thing I can thinks of at the moment, is deleting the iTunes preference files.
Drag the next files in ~/users/YourUsername/Library/Preferences to the desktop:
com.apple.iTunes.eq.plist
com.apple.iTunes.plist
com.apple.iTunesHelper.plist
com.apple.iTunes.xxxxxxxxxxxx.plist (x-es are characters and numbers)
The last file is located in the Byhost folder of the above mentioned path.
Run iTunes and try again to play a song.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

Doesn't play songs, "itunes is not configured for use with mac-formatted"??

Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
Thanks for any thoughts!

Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
If there is anyone out there that can help please do!
Windows XP

I've updated iTunes to 11.1.4.64 on my windows 8.1 machine but no music will play. the track shows but doesn't play at all.

I've updated iTunes to 11.1.4.64 on my windows 8.1 machine but no music will play. the track shows but doesn't play at all. Any ideas? Thanks

Hi TRDV,
Thanks for visiting Apple Support Communities.
Start with the troubleshooting steps in these articles if iTunes does not play your music:
iTunes 11 for Windows: If you have trouble playing music or other audio
http://support.apple.com/kb/PH12335
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Best,
Jeremy

Hi guys , when I tap a song on my iPod touch it plays the wrong song and sometimes it comes up with the now playing screen but no matter how many times I press play it doesn't play ,what's wrong with my ipod

When I play a song on my iPod it immediately skips a song and sometimes doesn't play any song at all

- Try a reset. It cvures many ills.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync and then resync the music
- Restore from backup
- Restore to factory defaults/new iPod.

Updated my ipod to ios5,and now it doesn't play most of my songs.

I updated my iPod touch 4g to iOS5,and it turned to be much slower than before and the most wired thing is that now it doesn't play most of my songs!
Play lists are useless now since if I click one of them and choose some songs,my ipod stops at the screen of what's "now playing" and stay silent,sometimes it jumped to another song!Probably not the problem linked to my apps 'course I made sure others apps tured off.And I still have half of the space free in this Touch.Same problems also jumped out the next time I turn it on.
btw,iOS5 ***** when it's on ipod touch.Making it like an old machine and,whithout WiFi, most of the new functions and new apps are just white elephants.
Can anyone tell me is this just what happening on my iPod touch or there are many people waiting for Apple to fix these bugs just like I am?
Or maybe someone who can help me solve this problem.
I'm waiting my music back into my ears!thanks a lot!

Thanks for starting this topic. Upgraded my third gen Touch to IOS 5.0, and now the iPod Music App refuses to play some songs, skips over others, and stops in the middle of a playlist, whether it's shuffled or not. There doesn't appear to be any commonality in the songs that fall victim.

My lightning adapter doesn't play my music

Every time I plug it into my docking station it doesn't play through my speakers help please

Is this the Apple adaptor? If so, Apple warns that it will not work with all accessories.

IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Video clips in iPhone 4s doesn't play well

Recently the video clips including video camera and any clips in Facebook in my iPhone 4s doesn't play well. Has anyone experienced this before? Any ideas to solve it?

Basics from the User Guide are restart, reset, restore from backup, restore as new device. If you've tried ALL of those steps and you're still having problems, you'll need to bring your phone into Apple for evaluation.

Firefox doesn't play video and audio, cann't download anything!

A very strange problem occurred a few days ago. I didn't pay attention on it at first ( I thought it was caused by my provider) but now I found that it's a real problem. Firefox doesn't play video or audio. For instance, it starts loading and that's all. The same is with playing music. In addition, I can't download any files and view a big image as quick as early.
What is more interesting sometimes Firefox just begins to work in ordinary way.

There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
If you want to try "hit and miss", you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. Perian, which rolls several codecs into one package, might also work.
If you just want to play the movie any way you can, you can also give this player a try:
http://www.videolan.org/vlc/
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

IE8 doesn't play .mov files

i had downloaded few .mov files which are associated with an HTML page. I usued to open this HTML page in IE8 to view the .mov files in the browser itself when I was running windows vista. I have upgraded my system to windows 7. Now when I click on the .mov file in the web page, .mov files doesn't play within the browser, but it opens quick time player to play the movie. no issues with firefox (in vista & windows 7).
I have uninstalled & reinstalled quicktime 7.6.4. browser plugin is available in IE8 and enabled. still, no go.
your help would be much appreciated.
Message was edited by: devajeet

I have uninstalled & reinstalled quicktime 7.6.4.
Do you still get the same problem if you upgrade to QuickTime 7.6.5, devajeet?
http://www.apple.com/quicktime/download/

Render doesn't play in apple tv

Similar Messages

Maybe you are looking for