Render fail 'Error - Unable to invert matrix' - what does this mean and how can I fix it?
I'm have a sequence I'm trying to render stop at roughly 230 frames and tell me 'Error - Unable to invert matrix' I say roughly 230 frames as it occurs at a different frame each time. I've tried switching layers that were active in time line off one by one to find the troubled layer/s but to no avail. The only thing that worked was switching them all off. Does anyone here know what 'invert matrix' means?
Thanks, Timothy
Does anyone here know what 'invert matrix' means?
How should we? Sorry to be blunt, but the caloric value of your post levels in at zero. You are not telling us anything. Nothing about the footage sources, nothing about your version of AE, not a shred about your comop and render settings, not the slightest hint about your operating system. This could come from anywhere - an effect, a specific CoDec setting, an issue with graphics acceleration. Also provide a screenshot of the error. If the error is really phrased like you posted it, it's not an AE error. All program internal errors fololow a specific logic and formatting and usually have a numerical code attached which helps to make sebnse of them.
Mylenium
Similar Messages
-
I have never been able to connect to the itunes store. It always says"itunes could not connect to the itunes store. An unknown error occurred.(306) " So what does this mean and how can I fix it?
Hello zabetnz
Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
Everytime i try to sign into my iTunes account, it says: We could not complete your iTunes store request. An unknown error has occured (0x800B0101). What does this mean and how can i fix it?
Hello zabetnz
Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
I have an error. pump motor stalled. What does this mean and how can I fix it?
Can some one help?
Hello zabetnz
Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?
I am getting the same error message. Have you figured it out?
-
When trying to download Itunes this pops up " key not valid for use in specified state" what does this mean and how can I fix it? I am using a pc laptop if that makes any difference.
Try reading through this thread: key not valid for use in specified state. Possible solution involves moving the RSA folder. Rather than deleting it as aniwack suggested I'd try this:
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2 -
When I plug my iPod in my computer, "This iPod cannot be used because the Apple Mobile Device is not started" message pops up. What does this mean and how can I fix it?
Hello di_gitrdone,
Start with this article describing how to restart this service.
http://support.apple.com/kb/ts1567
B-rock -
When I try to sync my iPhone 4S with my computer, I get this message: "This iPhone cannot be used because the Apple mobile device service is not started" What does this mean, and how can I fix it?
means that apple mobile device service needs to be started try this article to get it turned back on
Restart apple mobile device service -
I recently downloaded IOS7 and then iTunes informed me that I had to update to itunes 11.1. So I updated it and it said it couldn't be done, and I had to do so manually. What does this mean and how can I fix it?
Soph5 wrote:
Windows xp on a toshiba computer
Thank you...
Try here > iTunes free download from www.itunes.com/download
Also... See here > http://www.apple.com/support/itunes/install/ -
This is an message when I open up CS4 in Illustrator. "Some plugins in additional plugins folder are conflicting with application or user plugins. It will skip loading plugins from additional plug-ins folder? What does this mean and how can I fix it?
Thanks Larry. I thought so. I will do this weekend. Again, I appreciate your help.
Trying to get updated software – I am not a fan of the cloud stuff. Nothing I can do about it.
Thanks again Larry! -
I keep getting message "This page requires a plugin that can only run in 32 bit mode" what does this mean and how can I fix it? It seems to come up randomly, but I'm fairly ignorant.
Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.
-
I am trying to update itunes to 11.1.1.11 and keep getting message at the end ' error writing to file :c:\Config.Msi\301ded48.rbf.Verify that you have access to that directory'. What does this mean and how do I fix it?
I had this exact same problem just now, trying to upgrade to 10.7.
I even got that error msg when trying to UNINSTALL iTunes!
After hours of frustration trying everyone's different suggestions, I downloaded Revo Uninstaller http://www.cnet.com.au/apps/revo-uninstaller-10610875/ which solved the problem.
Use it to help uninstall iTunes and related software components in the following order and then restart your computer:
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support (iTunes 9 or later)
Then you can install iTunes from scratch.
Good luck -
PLEASE HELP~ My i-phone is throwing a code Error -54 when I plug it into my Imac.
It just started tonight. What does this code mean and how can I get rid of it?
The phone is charging, but it refuses to upload any new data. Unable too~
Thanks in advance!iTunes error 54
-
HT4061 i am seeing the message 1015 what does this mean and how can I fix it?
I am receiving a message 1015 what does this mean?
Error 1015 means you're trying to downgrade your iOS. You cannot do that. This is from an Apple article:
version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
Hey I just got an iphone 4 and everytime it gets to around 47% battery it dies, when I try to turn it on it says the battery is dead, when i place it in the charger it says 47% then continues to charge, could this be over heating or a bug? What is it and how do I fix it?
Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers
Make sure that Mute is not enabled.
2. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
Play sound effects through:
Select "Internal speakers" and then back to "Selected sound output device".
Maybe you are looking for
-
any cam Chooser component or any script pls.... in actionscript 3 This is AS2 : http://www.therealtimeweb.com/index.cfm/2005/1/22/camchooser?CFID=318996&CFTOKEN=69590068
-
Soundtrack Pro Mask Filter?
Is there a filter available for Soundtrack Pro that will make a speech sound muffled, like it is delivered from behind a gas mask? Where can I get it? Thank you.
-
Problems with iSight and Messages
Hi there, im having problems using Messages... i dont use it very frecuently but today i wanted to use a videochat and found i cant do it. I check in preferences and have this going on in the audio/video section: if someone dont understand spanish, i
-
Project stock to common Stock transfer
Hi Gurus, curently we have purchase to project stock scenorio triggered from SAP PS. Our company plant to purchase and put in common stock, so we are plannning to move current project stock to common stock , and also in future we will purchase to onl
-
Hi all, Now i am doing initialization for purchasing in R/3. i delted the deltas in RSA7. i deleted the setup table. now i have to initialize the data. 1) why shud i delete Deltas in RSA7? 2) Do i need to Run V3 Job? 3) hOW TO RUN V3 JOB? PLEASE EXPL