Render file reappears in time line

I have found playback of one section (about 3 sec) my time line does not reflect the actual clips...the playback reverts to what i imagine is an old render file of a different clip. I notice the blue render bar above the new clips. a workaround is to pull the clips back from this blue zone (the blue render bar reappears if i just slide the clips back in place) and then offset the whole sequence from the zone of the erratic render file. when i bring the clips back in, it is gone.
however, when i exported as an mp2, the render file is back in the same spot relative to the new clips!
any suggestions? thanks!

thank you for your kind suggestions. I will try them next time...I found an indirect workaround which was successful. I had a third video track which was toggled off. I had a couple unused video clips there (unrelated to this rebel render file). I removed the clips and the track, and did not have the problem of the rogue renderf ile again. don't ask me why....
thanks for all your thoughts and suggestions!
oh and by the way, I meant "mpeg 2" by the mp2.

Similar Messages

  • How do I get my file into the time line in Premiere Pro CC?

    How do I get my file into the time line in Premiere Pro CC? I am use to Premier Pro CS6 and unfortunately my labtop took a crash and I lost all of my adobe products. I wanted to check out a trial version and I cannot seem to find one for CS6! Please Help Me! My project is due tonight!!!!!

    Hi Aneumann,
    Welcome to the Forums.
    You have to just right click on the clip imported, in the project panel and select new sequence from clip. You can also go to file menu>new>sequence and create a sequence and then drag the clips after importing them , into the timeline.
    Regards,
    Vinay

  • How can I omit FCPX Render Files from a Time Machine backup?

    I want to be able to add my Final Cut Projects and Events folders to Time Machine, but annoyingly Apple have decided to put a Render Files folder within each and every Events folder.
    Is there a way of moving the folders to a different location on the hard drive, such as a Caches folder? Or is there some way of telling Time Machine to ignore folders containing the words "Render Files" (using some kind of script perhaps)?

    Backups For FCP works like Pro Versioner, only backs up project files, not the media.
    CCC will work over networks.  I have it running on enterprise systems for my consulting clients.  It is a fully professional level backup solution.  TimeMachine is a hobbiest, end user app, and doesn't have the control and flexiblity as CCC.
    TimeMachine backsup ever few minutes, when things change, and eats up processor resources constantly.  CCC can be scheduled.  So many advantages of CCC over TimeMachine.  One is professional, one is hobbiest, that is basically it.

  • When I drag the imported video files to the time-line it only recognizes audio - would anyone know why?

    This happened 2 days ago. Before everything was working normal. Since yesterday each time I import a video and drag it to the time line, it only allows me the drag the audio portion of the file. Even those files which I uploaded several days earlier and
    worked perfectly fine - now even those files are only showing audio when dragged to the timeline. I hope I didn't make my question too confusing.
    I have adobe premier PRO CC 2014 and I bought it vie creative cloud.
    Would anyone know why is this happening all of the sudden?

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Scary Message Every Import  from my Sony PMW 320 XDCAM EX  Clip Files w/ Completed Time LIne

    Hello
    This is the 3rd question I've posted working my way through my first edit (and HD edit) with Premiere Pro CS5.5, and I have a completed time line with the basic edit for an important event, my first for a client I hope to work for again.  Am now working on the title sequence at the beginning and also a "recap" with music and highlights at the very end.  Then I will be trying my first burn to a bluray -R disk on the LG 12x internal BRD unit in a high performance Mac Pro I had built at OWC.  10.7.5 Lion currently.
    3 types of files: 
    1.  1080i 29.97 upper frame first, standard 1080i settings......from my B camera footage from a Sony NEX 5N.  28mbps I believe.  Example clip:  00018.MTS.  No issues or messages on the imports into the Project window. 
    2.  Backup files same settings but 50mbps from Nanoflash recorder attached to my PMW 320 camcorder through the HD SDI output.  Example clip:  01253001.MTX. 
    Both of these above I just dragged their entire folders onto my internal master 2 disc Raid 0.  And then imported just the "clips" from each into the project window in each's own bin or folder.
    3.  Same scenario with my main files copying them from the large camcorder.  Example clip:  159_0221_01.MP4.  35mbps.  All 3 of these types of files have 29.97 fps indicated to the right.
    But in the Project window when I selected initially all the clips from the drop downs inside the folder from the PMW 320 on the Master drive, and since then just some individual clips.....I keep getting this::  A window with "File Import Failure" in the top header and 5 lines of all the Volume codings within that Folder in the message box, and below it, "Error Message"  "File format not supported"  with an active "OK" button.  Which I have clicked and then gone ahead and worked with them.
    But the clips in question are all in the project window and load fine into the Program Window or drag fine directly to the time line.  I have completed the whole sequence save for what I mentioned above.  Color correction, audio adjustments, slo motion, freeze frames, transitions, everything.  I have even taken a short piece of the time line and done experimental exports to self contained "Animation" codec clip,  H.264 clip and an MPEG 4 clip.  All were successful.  Last step coming soon will be export to 1080i 29.97 bluray.
    I believe I have seen "MPEG 4" in the codec info on the PMW 320's clips.  Being that Premiere is supposed to handle every codec no problem, and that it seems to have done just that, what is going on here with these messages??  I have a ton of hours into this 1st edit and it all seems to work.  Do I not need to worry about this message even if I don't understand why I am getting it?
    Thanks much
    Ron

    All that shows is the clips themselves, but yes I guess that could be happening.  So in the future from the PMW 320 import them 1st into Media Browser and then to the Project window?  (before taking them to Source window or directly to the time line)  Or just leave them in the Media Browser, and work it from there?
    In the meantime, the fact it has all worked and seems to be working, would you think I'm OK since I've been able to do up to a massive 156gb Animation codec 16 minute portion of the sequence while I was first experimenting?   I am likely going to try the Dynamic Link function and Auto settings into Encore, straight from my time line of around 90 minutes.  Per the suggestion of Ann here in one of my other threads asking about that part.  Just to see if I can mail it on time on Tuesday if it looks good.

  • Files missing in time line??

    Hi All....some of my files in the timeline have a strange icon...like missing files or footage. I notice the play back is not as good quality as files that are not with this icon. Any idea what to do???
    Message was edited by: philm2

    Find your thumbnail cache files and trash them.

  • Render files keep going off-line

    OS 10.5.4 FCP 6.0.4
    Deleted prefs file, but everytime I quit and relaunch FCP, the files I rendered out previously are offline.
    I reset all scratch disk locations still getting same results.
    Anyone have a suggestion?

    Could be a problem with the drive that the renders reside on. Do a repair on the drive using the disk utility. Get DiskWarrior and run that on the drive. Repair permissions.

  • How does one clean out the trash, after putting in a time line file in?

    After cleaning out some old files, it was late one night that I put a old file from the Time Line into the trash.  Now how can this be FIXED?

    Time Line...? If you mean Time Machine, then you should only delete old backups and files using the Time Machine interface.
    If you did a NO NO and moved old Time Machine backups to the Trash using Finder? Then go to > Time Machine - Frequently Asked Questions 12 and scroll down to the section in gray for the solution.

  • CS4: How can I copy named potions of the time line to the projects panel?

    I am trying to copy named portion of my time line to the project panel & I can't past the segment.
    I copied a large AVI file to the time line, split it up into sections, & am trying to place the individual rename section into the Projects Panel. I can Copy the segment, but when I try to Paste it into the Projects Panel the Paste command is not "lighted up".
    How can I copy named potions of the time line to the projects panel?
     

    I found a way albeit a tedious method:
    positioned the render bar( I do not know the proper name) to encompass each segment separately.
    Exported that segment to Media.
    Media in turn transferred the segment to the Media Encoder program.
    The Media Encoder, after processing the segments, deposited the files in a temporary folder.
    Lastly, imported the content of the folder to the Project Panel,
    Thank you for all your suggestions.

  • How do I get FInal Cut Pro to save the render files?

    Final cut used to work really great, but lately it has stopped saving any render files, so ever time I try to edit something new it starts re-rendering all of my other files and slows it down to the point of crashing a lot. Is ther any way to fix this or get it to NOT render things that I am currently not editing?

    Can you see the render files in your project folders? FCP X does not stop rendering by its own choice, check your preferences, as Tom suggested, and restart FCPX to see your settings taking effect.

  • CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!?  HELLL

    CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!?  HELLLLLPPPPP!!!!

    We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
    We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

  • Text file: reading char one at a time line by line

    I need to read an external .txt file, one character at a time, line by line, and compare each character in order to do various things. The problem is that when I use the Buffered Reader I have only readLine() method and others to work with, but none that actually read a character at a time, and line by line. The program has to read a character, then move to the next one and read it, and so on. Then move to the next line, and read the first character, and so on. I am working with chars not Strings. Could you please help me with this problem?

    InputStreamReader can read a single char.
    InputStreamReader isr = new InputStreamReader(InputStream in);
    isr.read(); will return 1 character from "in".

  • Need a VB-Script that read a txt-file and only the lines that are new since last time

    Hi,
    I need help to write a VB script that read all new lines since the last time.
    For example:  The script reads the textfile at specific time, then 10 minutes later the script read the file again, and it should now only read the lines that are new since last time. Anyone that has such a script in your scriptingbox?
    cheers!
    DocHo
    Doc

    Based on the excellent idea by Pegasus, where is a VBScript solution. I use a separate file to save the last line count read from the file, then each time the file is read I update the line count. Only lines after the last count are output by the program:
    Option Explicit
    Dim strFile, objFSO, objFile, strCountFile, objCountFile, strLine, lngCount, lngLine
    Const ForReading = 1
    Const ForWriting = 2
    Const OpenAsASCII = 0
    Const CreateIfNotExist = True
    ' Specify input file to be read.
    strFile = "c:\Scripts\Example.log"
    ' Specify file with most recent line count.
    strCountFile = "c:\Scripts\Count.txt"
    ' Open the input file for reading.
    Set objFSO = CreateObject("Scripting.FileSystemObject")
    Set objFile = objFSO.OpenTextFile(strFile, ForReading)
    ' Check if the line count file exists.
    If (objFSO.FileExists(strCountFile) = False) Then
        ' Initial count is 0, so all lines are read.
        lngCount = 0
    Else
        ' Open the line count file.
        Set objCountFile = objFSO.OpenTextFile(strCountFile, ForReading)
        ' Read the most recent line count.
        Do Until objCountFile.AtEndOfStream
            lngCount = CLng(objCountFile.ReadLine)
        Loop
    End If
    ' Read the input file.
    lngLine = 0
    Do Until objFile.AtEndOfStream
        ' Count lines.
        lngLine = lngLine + 1
        strLine = objFile.ReadLine
        If (lngLine >= lngCount) Then
            ' Output the line.
            Wscript.Echo strLine
        End If
    Loop
    ' Close all files.
    objFile.Close
    If (lngCount > 0) Then
        objCountFile.Close
    End If
    ' Ignore last line of the file if it is blank.
    If (strLine = "") Then
        lngLine = lngLine - 1
    End If
    ' Save the new line count.
    Set objCountFile = objFSO.OpenTextFile(strCountFile, _
        ForWriting, CreateIfNotExist, OpenAsASCII)
    objCountFile.WriteLine CStr(lngLine + 1)
    objCountFile.Close
    Richard Mueller - MVP Directory Services

  • Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line when making BR ISO

    Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line.  What is this and how do I correct it.  This happens whenmaking a Blu ray ISO with Menu or no menu created
    Using: I7 Windows7  machine with Production Premium CS5.5
    I get this wether I create a menu or no menu. I have tried several times with it. I do not know what the error is or how to correct it.
    I encoded with no errors in Premiere.
    I get this jsut after Encore starts to transcode the files.
    Please help,
    Steve

    Go back to http://forums.adobe.com/community/encore and enter
    Error Code 19
    in the area just under Ask a Question
    You may now read all the previous discussions of your error... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

  • Unable to import powerpoint .mov files nor see stuff in my time line

    any ideas as to why I can't import my powerpoint .mov file into imovie? Powerpoint movie was created with the mac powerpoint software and make movie seems logical.
    Also I can't see items in my time line correctly. If i choose a frame it shows me stuff either ahead of that frame or prior...never that frame I'm choosing.

    hi there, i'm not sure but i think it is because the powerpoint.mov file is actually an animation and has 3 x video tracks that cross fade. I have had the same problem. good luck, Phil.

Maybe you are looking for