Render for mp4

I have after effects cs6. I try to export my file (it is time lapse ) in mp4 format. I can't finde this format at the softwere. can some one can help me where and how can i do it?

It's called H.264/ MPEG-4.
Mylenium

Similar Messages

COrrect codec for MP4

I received the correct codec and fos to import a TOD file into FCE without the need to render
I used the same format for MP4 files but they need rendering. Which codec should I be using for MP4?
Final Cut Express 4.01
Intel Mac
Henry

May I suggest that you post that question in the Final Cut Express forum?
http://discussions.apple.com/forum.jspa?forumID=936

How do i change the file preview image for mp4 files? I replaced the image but it doesnt show in my dock, instead it shows the first still of a movie

http://imageshack.us/photo/my-images/21/screenshot07m.jpg/
http://imageshack.us/photo/my-images/39/screenshot04s.jpg/
pls help. i change the file preview of a movie file, and it shows that i have changed the preview in finder but when i open the folder on my dock, it shows the still of the movie instead.
the image shows the film the hangover as an example. the movie poster is visible in finder, but reverts to a default movie still from the dock. this only seems to occur for mp4 files.

its nothing to do with itunes, its movies form the internet. i got the file preview by taking an image off the internet, pressing command c and pasting it on top of the small icon in the get info section

Thumbnail images for MP4 files vanished again - how can they be restored?

My thumbnail images for MP4 files have vanished again and could you tell me how to resttore them please? I am running Windows 8.1 and IE11 Browser and use the Real Player to play these files. When I run a flash test it says one minute it is not installed in the browser and the next test confirms that it is installed. Is this a known problem with Windows and can it be fixed by adjusting a setting somewhere. Thanks for your help.

Enable Compatibility View for IE: http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11 and the plugin will be recognized.

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I guess you are calling BDC right after some event which is locking the data or before the commit of previous data could happen. Sometimes data update needs time. You can try using WAIT statement right before it and wait for 1 or 2 seconds and see if it works.
If it does, I would recommend you to check the lock on the corresponding object and when lock is removed update the data as waiting for 2 seconds for a larger set of data will just make the program a bit slow. Depends on the amount of data though, if it is just one set of transaction, you may use WAIT for 2 seconds.
Regards,
Aabhas

"fast start" for .MP4 H264/AAC ?

Hi,
I am looking now for a "fast start" option in Compressor 4 for .MP4 H264/AAC encoded files.
Is there a way to do that ?
Thanks
Eric

Eric,
See if this works for you. Start with the Broadband High preset (you could use any preset). Open the Encoder pane; in File Format, choose Quick Time; Click on Video Settings and in Compression Settings, select H.264. Set your data and then Optimize for streaming. Return to Encoder and open Audio settings to specify thge format you want; In the Encoder, select Streaming and then select Fast Start. In the Extension box, change the extension from .mov to .mp4. You should wind up with a MP4 H.264 CBR preset.
Good luck.
Russ

API to access and set properties for MP4 files

I am looking for some APIs in Visual C++ to use in Visual Studio to set
and get properties for .mp4 files. Can anyone help me in this regard?

Hi Rahul,
Try using the Windows Media Format SDK with help from the below document:
http://blogs.msdn.com/b/tims/archive/2004/03/28/extracting-metadata-from-windows-media-files.aspx
Alternatively, you can give a try to ffmpeg libraries for a open source alternative.
https://www.ffmpeg.org/download.html
(Please mark as answer if this solves your query. Please upvote if this reply is helpful).
Regards,
Rajesh Nath

HTTP_REFERER header is missing in request for .mp4 from Safari on ipad or iphone

I just discovered that when I have a .mp4 file embedded in my webpage and I visit that page using Safari on the iPad, the request for the .mp4 is missing the referer header. This is a problem for me because I use URL Rewriting in my web.config file on IIS and I redirect requests (in which the HTTP_REFERER does not begin with my own domain name) to a no hotlink image. Safari on the iphone4 does the same thing when I visit this page--the HTTP_REFERER header in the request for the .mp4 is empty. I've had to turn my hotlinking protection for MP4 files off on my site in order for ipad/iphone to display the video on my page. If the hotlink protection (i.e., rewrite rule in my web.config) is turned on, the video does not display.
It seems like this would be a common issue because hotlink protection is commonly implemented in this manner.
Is there something I am issing? Some special way of preventing hotlinking and yet letting the mp4 content through to idevices?
Thank You!

I have the same issue with Safari, but with mp3 files not playing using a HTML5 player on my website. I have hotlink protection enabled and the audio plays on every other browser except Safari, so there's seems to be a problem playing any videos or mp3 files when hotlink protection is enabled.

Can't render/import .mp4 [HELP!] AE CC

EMERGENCY!! I CAN'T WORK NOW...
I opened AE CC and normaly when I select h.264 I will render in .mp4
Now when I select h.264 it will render in .m4v instead of .mp4
In this image I show you the error/situation.
Error : Subject       : Adobe Media Encoder (In After Effects)
           Description : Some of the required components could not be found.
                               Try reinstalling the application.
Already tried reinstalling.

YOU NEED TO UPDATE!
You are not running the latest version of After Effects CC. You should be on 12.2.1.5. You are missing a lot of bug fixes.
That being said, I don't recommend rendering an MP4 from After Effects. The Adobe Media Encoder does a much better version of creating a compressed, final deliverable. I have always rendered an intermediate file from AE and then used something else to encode MP4's.
Version 13 of AE (which you could also install instead of 12...) doesn't even include the option to create an MP4 from AE because the Adobe After Effects team feels that AE is just so bad at making MP4's, they don't even think it should be an option.

Table cell Render for one cell

Hi all
I am hoping that someone can help me with a cell render for one cell only.
I am needing to make some cells bold.
What i was hoping is that there is a way of passing in a row and column number to make that cells font bold?
Any ideas ??
I am building a List of accounts that I what to look like this.
1-0000 Asset |Asset|Balance
1-1000 Cheque Account |Bank|Balance
1-2000 Credit Cards |Credit|Balance
1-2020 Visa |Credit Card|Balance
1-2030 Master Card |Credit Card|Balance

Create a renderer like you've done in the past:
http://forum.java.sun.com/thread.jspa?threadID=679718&start=2
The renderer knows the row and column you are doing the renderering on so you just need to add a conditional check:
if (aBoldCell)
setFont( getFont().deriveFont(...) );
else
setFont( table.getFont() );

Best settings for mp4 video for ipod and watching on imac (apple tv)

Have a few films in mp2 format (recorded from digital tv) and want to use mpeg stream clip (1.93b version )software to convert to mp4 that will play on ipod and look ok on a imac 20'screen.
Ive converted a couple but these do not play correctly on ipod (sound ok, just a collection of still frames-prob to high a bit rate etc..)
What are everyones settings for mp4 that looks ok on 20inch screen and the small ipod screen?
cheers,

Try converting using iSquint (just google it). This should be good.

Audio sync fix for .mp4?

hi,is there a way of fixing the audio to the video for .mp4 files?

I also never have had any synch issues with WMV and H.264 MP4 exports (or anything else) in any of the CS versions.
I also have never noticed any posts regarding this as an issue either ...so not sure who ..
...all of us who paid good money for CS5 have had to live with this issue for more than a year
...would include.

INSANELY SUPER SLOW conversion times for MP4 to Quicktime Movie..HELP!!!!!!

Hi folks...
I am frustrated.
I am a student in a Film Editing class.
I have an assignment where I have to take a classic film and create a movie trailer for it using the original film and editing in FinalCut Pro.
I started off by using Handbrake to change the original DVD of the film into an MPEG-4. This took about 3 hours, which was long....but Handbrake did a very good job and the conversion was completed.
So, I have a high quality MPEG-4 of the movie.
However, as many people know, you cannot import an MPEG-4 file into FinalCut.
You have to first convert the MPEG-4 to a Quicktime Movie (a.k.a. "mov file")
HERE IS WHERE THE PROBLEM HAS STARTED
I have been trying for almost two weeks to convert one movie- the 1979 movie "Alien"- over from MPEG-4 to Quicktime.mov, as I keep running into problems.
Right now, at home, my computer (a PowerMac G4) is converting the file using MPEG Streamclips...
At the current rate it is going (I timed it and used a calculator)...it will take approximately 80 HOURS (!!!!) for MPEG Streamclips to convert this film from MPEG-4 to Quicktime MOV.
I literally started the conversion at 8 o clock last night. I went to sleep. This morning I was getting ready to go to my job. The file was still only 10% COMPLETE...(THIS IS INSANE)...
I got upset with this, as my professor in the editing class says he may dock me points for a late assignment.
So, I PURCHASED Quicktime Pro for Windows.
I have downloaded it onto this PC I am using.
In almost 2 hours, it has only gone from "8% completed" to "9% completed"... there is no way this will be done in any less than 48 hours. NOTE- I am not using a 3rd party, free, unpredictable sortware...I am using the official Quicktime 7 PRO that I bought straight from APPLE....and it is THIS SLOW.
This is absolutely crazy. IS THIS NORMAL? People running their computers 24 hours a day for 3 to 4 DAYS to convert a film from MPEG-4 to Quicktime Movie?
What can I possibly do to make this go faster? I was afraid I was going to crash this PC (the fan has been running loudly on high non-stop since I started this...I know this will take more than 8 hours at this rate, so I shut it off)
What are tips/shortcuts that anyone can give to help with this.
I dont think I should have to go to the United States Government to the Pentagon (or to Steve Jobs's house!) to get a computer with enough RAM and computing power to change an MP4 to a Quicktime movie.
I have even used the newest and most powerful G5 computers here at the university, running OS 10.5 with Quicktime Pro as the converter....and still seen extremely slow conversions (as in, it will take 48 hours of continuous computing to complete this)
Is this normal? Does everyone actually do this when they need to convert a film?
Or, are there shortcuts, slight drops in quality, or special shortcuts I can take?? What do KNOWEDGEABLE people do to convert an MPEG-4 file to a Quicktime Movie?
3-4 hours is long, but reasonable.... 80 HOURS IS INSANE......
.....Please HELP out a struggling film student!!! Thanks and God Bless
Message was edited by: JonCapogrossi
Message was edited by: JonCapogrossi

I restarted the conversion, only this time I am seeking to convert the MEPG-4 over to "Apple DV/DVC PRO- NTSC format"
An instructor here at the school gave that as a suggestion...
Now, at the current rate of THIS conversion, it will STILL TAKE about 40 hours of continuous processing to convert this film. THe computer will need to run 24 hours a day for almost 2 days to convert this.
The instructor told me he thinks the ludicrous time frames needed have something to do with the fact that I am converting this film from MPEG-4. He thinks that this could be what is causing it to be this slow.
I am just not used to this type of thing....I have never used a computer to do ANYTHING that takes 40 to 80 hours to complete.
I think that director Ridley Scott likely filmed the actual movie itself much faster than this conversion is taking (!!!)

Itunes 10 Add to Library doesn't work for mp4 file

I'm running OS X Lion, iTunes 10.5.2, Quicktime 10.
I am trying to add an MP4 video file to my library and itunes simply does nothing when I drag it to the Movies folder or when I try to select the file from the Add to Library command. I've been reading for the past hour and see others have had similar issues. Is there a fix for this?

I just discovered that iTunes doesn't like the H.264 version of MP4 files. If I convert the video to MPEG-4, I can successfully copy the file into iTunes. Is this a bug or a feature?

Render for mp4

Similar Messages

Maybe you are looking for