Render issues for Youtube

I am trying to render a project for youtube. I have uploaded screenshots of my render settings, which were recommended by other users as I am using the trial and dont know if I want to pay for this program. (The Advanced Settings for Audio has bitrate checked) It rendered with a mp4 ending but youtube says it isnt recognized. Is this normal or is something wrong with my settings?

Use the preset it already has for YouTube, not a custom one. You will see it if you scroll down the box, pick out for example YouTube HD 1080p. If you're in 720P then pick that one.
Another thing would be to try to not get an .mp4. Select quicktime on export.

Similar Messages

I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?

I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?

Hi, I had been having the same problem for over a week, but both my window's HP and my 2011 macbook pro barely could load youtube. What kind of router you have? I was using a belkin play router that was only 8 months old, switched to a new AirPort Extreme Base Station and now everything works perfect.

I get no sound for YouTube or music when headphones are out. Speaker phone works fine. It appears to be software issues. Any ideas?

I have an iPhone 4s w/iOS 5.0.1. YouTube and music player do not produce sound w/out headphones being plugged in. The speaker phone and other phone sounds continue to work properly. The volume buttons on the side of the phone do not control volume unless the headphones are plugged in. When you go to 'settings' then 'sounds' and make sure 'change with buttons' is selected, the volume bar will not move with the buttons until I make the volume change on the bar with my finger - then the buttons control the volume bar (but still no sound for YouTube or the music player without the headphones). It appears to be some type of software issue. I have read the post about theap home thinking the headphones are still plugged in, but that would not explain why some sound works and others do not. Any ideas?

Hello tiffay8,
Thanks for using Apple Support Communities.
From your post I understand you're not getting any audio output from your speakers when you're playing games. Follow the steps below to resolve the issue:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Take care,
Alex H.

Hulu wont play videos on firefox but work fine on IE; flashplayer on youtube worked after html5 switchover, same issue for hulu videos?

Recently updated both firefox (version 27) and flashplayer plugin (12) and I then started having problems trying to play videos on youtube or hulu. After messing about with troubleshooting, I got the youtube videos to finally play (apparently, had to change to HTML5 mode) but now I still can't play the hulu videos. Hulu works fine on IE (which I used to use before FF) although, that is the ActiveX version of flash player. I've tried most of the suggestions that are out there for this particle problem and none of them seem to work. What I have yet to try is fixing the mms.cfg file located at C:Windows/System32/Macromed/Flash and that's only because my equal sign key isn't working.smdh. The file that was there initially couldn't be opened or was corrupted so I'm thinking this might be the game changer I'm looking for. Any other relevant suggestions would greatly be appreciated as well. Thank you

oh, there is still a pending issue with youtube unfortunately. I can play videos individually but if I click on a video that is part of a playlist it lags and then goes to a blank space where the video should be. Is that a flash player issue? So, I can play videos individually but not playlists.
Any word on that would be awesome
Thanks again
E

PAL Widescreen Render Issues

Hello Adobe,
I'm in need of some desperate help. For quite awhile now all video not matter what quality or format has rendered out terrible looking video. I usually work within After Effects and render out graphics using adobe media encoder. I create graphics in a HD composition (720p) and add to AME queue for render and change the preset to PAL DV Windscreen which results in terrible render quality. I have some examples below and all settings used. I need these videos in PAL for DVD render.
Here is my workflow and settings.
After Effects:
1280X720, 25P 8bpc
Graphic has been pre-comped with continuously rasterize enabled.
AME
MPEG2
PAL Widescreen, Progressive.
Screenshots for more information:
I have done a very basic graphic to test the quality - Render Quality test - YouTube
Help would be much appreciated, Thanks.

Hi
He described the problem that the menu would not let them select any buttons, and that the menu was cut off top and bottom.
What size did you use to build your menu backgrounds and overlays?
Anyone have any suggests on how to get the first play to work?
It uses to be so simple as selecting what item do you want to run first in DVD Inspector in DVDSP. What element is your first play? The Menu? You cuold try building a very short track (3/5 secs), with just black image and use that as first play (or a simple slideshow with a single black image). I have heard around the forums about some issues with some specific players with a menu as first play.
Hope that helps !
Alberto

Render Issues, FCP7 - strange colours

Hi there,
sorry if this issue exists somewhere else on the forum. I couldn't find it.
I'm trying to render in FCP 7 and I'm getting strange issues where colours that shouldn't be there appear.
I'm using footage that was originally shot in HDV on an HV20 but was converted to Prores. It's also been through colour, rendered through that and then reimported.
The shot in question has a colour filter on it, crushing the blacks. It appears in anything I export. In other situations where I've come across this issue, I just rerender and it's fine. But this shot seems to not be able to shake it.
I'm uploading a video to youtube for reference. I'll post when it's up. But in the meantime if you have any suggestions or thoughts it would be much appreciated.
Thanks in advance for the help.

Thanks,
That didn't help. But it seems I've now worked around it. I removed the colour corrector filter and replaced it with a brightness and contrast filter.
If anyone else has suggestions on how to solve this issue for future issues - or an explanation as to why this happens - your insight would be much appreciated. I've come across this problem before. But I usually work around it by switching to my other computer (that seems to favour rendering better for some reason). Unfortunately, this time I'm on the 'better' computer that tends to solve my problems.
Thanks,
Tess

I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube,some of the photo near the beginning was corrupted.What steps should I take to export iMovie for youtube?

I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube, some of the photo near the beginning were corrupted on youtube. I tried a different photo, and the corruption took place at the same moment of the video. How do I prepare the video for export to get it ready for youtube? I wasn't sure whether to clik web or web streaming. Am I supposed to clik Quick Time after I clik Share?

I unfortunately cannot remember where I got the 'trrndlines' plugin... I assume that it must have been from CFX (as it is located under /Users/Dom/Library/iMovie/Plug-ins/cfx/XXXtrrndlines.bundle).
As for what it does, I also do not know, as I do not think I ever used it in my previous video projects.
At this stage, I think I just need to uninstall it so that iMovie doesnt try to use it.
Do you know how to uninstall a CFX plugin in iMovie?
NOTE: I have re-installed iMovie 6.0.4 (instead of iMovie 6.0.3), but still encounter the same issue.

How do I get the audio to work for YouTube and other videos?

How do I get audio to work for YouTube in Facebook and other videos as we'll?

Hello, Olubabi
Thank you for the question. I'm assuming you are not receiving any sound from applications when playing video/audio content. If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute. Below I have included an article that covers adjusting the settings for the side switch. Also, make sure to close all applications in Multitasking and power cycle the device. Test the sound issue after processing these steps.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Regards,
Jason H.

Apple Pro Res 422 / FCP7 render issues

Hello,
I do a lot of timelapses and have pretty good workflow for all this. However, I am experiencing one issue that makes everything a bit difficult. I appreciate if anybody could help me.
My workflow is:
1. Shoot some stills RAW
2. Develop in Adobe Camera RAW
3. Import stills sequence and render in AfterEffects CS4 to AppleProRes 422
4. Import to FCP7 and edit
5. Grading / color correction
6. Publishing
All works fine, however I am having very often an unpredictable issues with the Apple Pro Res 422 codec under FCP7.
I always render a bunch of sequences from AE using the same settings for all files. The only difference is resolution.
My render settings for exporting from AE are:
- Apple Pro Res 422 wrapped in MOV
- render in 10-bit YUV from RAW 16 bit sequence files
- AE project in 16 bit
- Resolutions of rendered all files around 3500x2500 px, this vary from file to file.
The sequences render fine in AE.
The sequences play properly in QT, I can import them to FCP properly, play in FCP properly. I can drag to timeline, scale, rotate, scrub etc.
However: Some sequences fail to render in FCP7.
When I drag them to my working sequence in timeline (Usually a Full HD 1080p, Pro Res 422, YUV), scale down (usually) and try to render timeline footage (don't mean exporting here yet) I get the following error:
"Codec not found. You may be using a compression type without the corresponding hardware card."
This happens on many computers including iMac, MacbookPro and a Mac Pro.
I discovered that setting the footage size to even width and height figures when exporting from AE eliminates the problem sometimes, but it does not help in all cases.
Also it sometimes help if i take such sequence, crop and export using QT under the same settings, just a few pixels less in size. But again - it helps sometimes.
Can anybody help me with these?
Anybody experiencing similar issues?
Thanks a lot.

I had the same problem when we started to edit on Pro Res timelines. The solution I found was to go the Sequence Settings > Video Processing > and change the Render setting to "Render in 8-bit YUV" that allowed me to actually render the timeline and view my work. Hope that helps.

Is anyone having issues playing youtube on their apple TV

for the last 2 days my youtube on my apple TV is acting up anyone having the same issue

Well, the only real issue for me is that often I will be in the middle of my long list of subscriptions and it will just go back to the beginning, or jump around.
Then, for long periods it is fine.
I have found I can stop that by scrolling to the bottom of my list of subscriptions and start from the bottom up.
What issue are you having problems with?
Hugh

Exporting For YouTube - Premiere Pro CS5 (Canon XL2)

I shot a promo video with my Canon XL2, and would like to upload the finished product to YouTube at the highest possible quality in order to help promote the company I work for.
Footage shot in 30p at 29.97 fps, 16:9 - NTSC.
Sequence settings are all correct and match my footage perfectly.
I have exported the video as H.264, AVI, MOV, MP4, MP2, WMV and countless other formats. When played on my computer the video quality is SUPERB. I am ecstatic at how it turned out, HOWEVER, when I upload the video -in any format- to YouTube, it looks absolutely horrible - as though it were shot with a webcam.
Does anyone have any advice as to what I might be doing wrong? Anyone had any experience with the XL-2 and Premiere Pro videos being ugly when uploaded to YouTube?
Thanks a bunch!

Be very careful when using Adobe's presents for YouTube, Vimeo, etc. They have a fixed frame rate but it doesn't always match your source frame rate and this adds additional render time and can drop or add (adding is much worse) frames.
The worst offender is a preset that is for non drop-frame 30.0 fps (instead of drop frame 29.97) because every 3 seconds 3 frames get added.
Also be aware that when exporting for the web (or most anything other than to DVD), you want to use square pixels.
This might require a bit of tweaking with the presets but it is well worth the effort.
864x480 is the square pixel equivalent to 720x480 widescreen (1.21...).
For more indepth info on the presets (and my rants on the matter) - have a look at my CS5 and C5.5 articles.
http://www.eventdv.net/Articles/News/Feature/Benchmarking-Adobe-Premiere-Pro-CS5-70277.htm
(under the heading "Don't trust the presets")
http://www.eventdv.net/Articles/ReadArticle.aspx?ArticleID=74852
(under the heading "Working with watch folders in Adobe Media Encoder CS5.5")

Render issues with text

I have made a short 1 min movie, and have rendered it. I want to download to youtube, but when I try to export using quicktime conversion, it shows render issues wherever I have text. Once I get cancel out, it shows no render problems.
When I remove the text, the render problem still remains. I can export with quicktime, but not sure youtube will allow this to be downloaded.

Please define: "render issues" and also the phrase "Once I get cancel out"
-DH

Proper workflow for youtube?

I'm new to FCP X, and video editing in general.
I created some nice videos, recorded in 1080i, and when the sequence is finished in fcpx, I have been using the following workflow:
1. Render the whole thing first (as I keep background rendering off while I work)
2. Use the "Export using Compressor Settings" in the Share menu
3. Choose the "Video Sharing, 720p" setting
4. Save it to my desktop
5. After hours of waiting...
6. I login to my YouTube account
7. Add the video, and then wait.
The problem I'm having, is the incredibly long youtube wait to upload. The file I'm using came out of FCPX/Compressor at about 750MB. It's 9 minutes long or so.
I've literally been trying for 7 hours straight to get this stupid video to finish going to youtube. It goes, stalls at, say 56%. I quit, try again later, and maybe it gets to 86%. 7 hours? It's taking me longer to get the video out for viewing by the client, then the entire time I spent shooting and editing it. Awful workflow this way.
So, I'm looking for some real-world workflow on youtube.
Should I be trying to upload a 750 MB file in the first place?
If not, how would I export it down, and keep the quality at 720p?
Am I missing steps here?

Well, the video processed, and it's now in the wrong ration, it's 4:3 as in SD.
So, quickly, which File Format would I use? I get a whole list. I just chose QuickTime movie before, and got the SD ratio.
MPEG-4? H.264 for Apple Devices?
Then I need to choose Video Compression, there are several H.264 options there as well.
I do see the bitrate slider, and can easily enter 5,000 for that.
Just a few tips would ge appreciated.
Anything I can do to streamline the creation of the proper file for youtube upload would be great.

Why am I NOW having major issues watching YouTube videos using WiFi vs Ethernet?

Why am I having major issues watching YouTube videos when the cable modem is connected to Airport Extreme, but they work flawlessly if my computer is connected directly to the modem? Comcast is the internet provider. 2.16 GHz Intel Core 2 Duo is the iMac. Getting the dreaded "This video is currently unavailable" OR "An error occurred. Please try again later." I swap back and forth... it's unbelievable. Videos that give errors over WiFi play fine when hooked up via ethernet.

If your wireless connection is slow, video streaming will stutter or fail completely. The wireless connection can be slow if there are other wireless networks in your area, all competing for the same limited number of wireless channels.
If you have a fairly new Extreme, you can use 5 GHz. Your iMac is capable of using it, and this will mitigate the effects of wireless interference.
Keep one thing in mind - if in the course of troubleshooting you have been routinely disconnecting and reconnecting your Extreme and the iMac to your modem - "swapping back and forth" as you described - be sure to power down the modem first. Most cable modems will refuse to communicate with a different device, until after you reset it by powering it down. If you want to compare wired speeds to wireless, connect your iMac to one of the Extreme's LAN ports instead, and turn off the iMac's wireless in its WiFi menu. Its speed should be nearly identical to that you will have by connecting it directly to the modem. Swapping connections in this manner does not require a power down cycle.

Buffering issue with Youtube.

I'm having buffering issues with YouTube. I've cleared the cache in browser, cleared history, done a factory reset.
It's frustrating. Any insight would be appreciated.

Thank you for replying. I have a brand new router my connection is strong video grade connection. I've tried wifi at home at work,at my folks house same thing. It seemed to be happening after the update we recieved a month ago. I'm not sure though.

Render issues for Youtube

Similar Messages

Maybe you are looking for