Render Issues in Color! Please help!

I have just graded a music video. Everything imported from FCP to Coor fine. Haaving completed the grade, i am in the process of rendering. I have encountered a problem.
A select few of the clips are rendering as the entire source file, as opposed to the individual cut that i exported from FCP into and graded in color! the strange thing is that other cuts, from the exact same source file, are rendering as they should do.
Any ideas as to why this may be....i filmed on RED and some of my clips are 5 mins long which is really slowing things down!
HELP!
Thankyou!

Depending on the version of COLOR, prior to 1.5, clips with speed changes would prompt the application to render the entire source clip. This is the cause 90% of the time. If this is the case, you may have a problem as the usual fix is to render out an independent clip and reconform it into the timeline. If you do this, you may not render the item back to Redcode and you will lose the REDtab in the COLOR Primary In Room.
jPo

Similar Messages

Apple TV 1G black screen or green and violet colors please help me

Hi, I have an apple tv 1G and from one day to another is not black screen, the strange thing is that on another monitor "HP w2207" looks good. But I've tested Sony LED TV, LG, .... and does not work in some apple when starting out and color is violet and green and looks bad but does not exit the main menu. I've reinstalled the factory, I tried to change resolution I miss everything but nothing. I'm desperate please help me

I also periodically have this purple/green color showing on the screen when I turn on and sometimes it happens when I turn on Directv so not an Apple TV issue. I believe in my case it is the HDMI cable/port causing it. But it corrects and gives normal picture if I turn off the tv and all devices and turn all on again.

User account issues in school please help urgent

currently have 15 emacs on school network running 10.3.9 and the rest are windows machines the macs are standalone machines yet have the same logins for each. The issue is with setting up accounts for the students I dont want to use simple finder as the account type i want to use managed but the problem with that is students can select go connect to server and they can access all the servers on the network is there anyway of greying that out or getting rid of them being able to do that please help as this is urgent as students are in the process of doing coursework

Hi Craig
When you say you want to stop...
them being able to look at the computers on the network
is ambiguous.
I am presuming you are not concerned about students accessing other computers on the network, as there are ways of preventing that, but you simply do not want them to be aware of any machines on the network.
Using Simple Finder which presents a limited Finder menu without the Connect to Server showing will achieve this, but you say you don't want to do this.
Elements of the Finder menu cannot be turned on and off with Terminal. Terminal can modify network settings but it cannot as far as I know disable a menu item in the Finder. If that was effected, it would be called a hack.
I don't see a how to be networked and be blind to the network at the same time. Perhaps others may have a creative solution for you.
regards roam

Image Gallery issues with Lightbox2 - please help!

Hello there,
I am using Lightbox2 image gallery. The loading.gif and close.gif aren't showing up and I think there's an issue with the path in the lightbox.js file. The loading and close gifs are located in the Images gallery so I changed the path in the lightbox.js file accordingly - I've gone through this many many times but they are still not showing up.
Can anyone please help me?
My website is: www.labellepetraie.com
Here's where I downloaded the script from: http://www.huddletogether.com/projects/lightbox2/#how
I have tried all the path combinations mentioned in their forum but to no avail. What am I doing wrong?
Thank you for any help you can offer to me.
Regards!

Interesting. I've just looked at your scripts, and it would appear that you have blended two versions of lightbox2 on your page,. Is that possible? The lightbox.js file has no function called initLightbox() in it, whereas older versions do. So, try changing this:
window.onload = function(){ // use this instead of <body onload â€¦>
     MM_preloadImages('../3websites/home4.jpg','../3web sites/amenities1.jpg','../3websites/inquiry1.jpg','../3websites/rates1.jpg','../ 3websites/photos1.jpg');
        initLightbox();
to this:
window.onload = function(){ // use this instead of <body onload â€¦>
     MM_preloadImages('../3websites/home4.jpg','../3web sites/amenities1.jpg','../3websites/inquiry1.jpg','../3websites/rates1.jpg','../ 3websites/photos1.jpg');
        //initLightbox();
to see if that works. I think so. Turns out the initLightbox() function call that we activated by fixing the code before is no longer needed by the lightbox2 script as of v2.04! I see that it still tells you to put that function call in the body tag, but i think that is wrong (which is very weird to say, can I really be right???). If you look at the example page online you'll see that he uses this body tag:
<body>
and there are no onload's anywhere.
Let me know.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Wireless Connection Issue Macbook Pro PLEASE HELP!

Hi
I got a brand new macbook pro 13' the other week, i installed everything etc and also my bt home hub 2 showed up in airport and it all worked fine no problem no matter where i was in the house.
Yesterday i tried to get on the Internet on the bottom floor and my router is on the 3rd floor and it won't connect to my Internet, it asked for the access key and then i get timed out message and then a message abut its the wrong key, out of range etc. I then go to the room with the router in or on the same floor and it connects and works fine, but soon as i move downstairs it does'nt work as it did before.
Ive reset the router, changed router channels to all of them, changed it to G, N etc and still no joy, also tried WEP and still no joy
Is this an issue with my mac or my router, my mac and router are n power why is suddenly not reaching the bottom floor when it did no problem before.
Please help
Sam

Macbook Pro and BT Homehub4. Looked for help here but did not find it, however, solved the problem by chance as below.
Problem - having recently installed Homehub4 Macbook was persistently refused access to the hub on the grounds that a password was required and the one keyed in was incorrect. An older iMac upstairs was fine - this was the one set up by the engineer when installing. Signal strength was at full.
Solution - found by chance that the Macbook worked ok from another room and concluded that the signal strength was just too high in the original position. By placing a biscuit tin in front of the hub the signal is sufficiently attenuated to work in the original room, and is still good enough to use the upstairs machine too.
So signal is too strong! I call that counterintuitive and I bet no help desk would think of it.
Regards, John.

NEED HELP!!!How to make LINES Colorful--PLEASE HELP!!!!!!

i want to draw a red line:
Graphics g;
g = b.getGraphics();
g.drawLine(20,5,100,64);
but the line is black, i want it red.
the command g.setColor(color.RED) is not working....
WHATS WRONG, please help, thanks thomas

Here is my code....
mport com.ms.wfc.app.*;
import com.ms.wfc.core.*;
import com.ms.wfc.ui.*;
import com.ms.wfc.html.*;
import com.ms.awt.*;
* Diese Klasse kann eine variable Anzahl von Parameter auf der Befehlszeile
* entgegennehmen. Die Programmausf�hrung startet mit der Methode main(). Der
* Klassenkonstruktor wird nicht aufgerufen, bevor nicht ein Objekt vom Typ 'exel'
* in der Methode main() erstellt wird.
public class exel extends Form
     String datum2="";
     String userdateinput="";
     int count=0;
     int i=0;
     int day7=0;
     int m=0;
     int p=0;
     public exel()
          super();
          for (i=0;i<31;i++)
          Point[count]="305";
     Graphics g;
     int xx1=5;
     int xy1=305;
     int xx2=600;
     int xy2=305;
     int yx1=5;
     int yy1=5;
     int yx2=5;
     int yy2=305;
     int i=0;
     //Bitmap b = new Bitmap("c:\\BACKGROUND.BMP");
     Bitmap b = new Bitmap(600,600);
     b.setTransparentColor(Color.RED);
     g = b.getGraphics();
     g.drawRect(0,0,600,600);
     g.drawRect(0,0,600,600);
     g.setBackColor(Color.RED);
g.setColor(Color.RED);//HERE IS THE ERROR!!!
     g.drawLine(5,10,5,305);
     g.drawLine(5,10,10,10);
     g.drawLine(xx1,xy1,xx2,xy2);
     for (i=0;i<5;i++)
          yx1=5;
          yy1=60+yy1;
          yx2=10;
          yy2=yy1;
          g.drawLine(yx1,yy1,yx2,yy2);
     for (i=0;i<31;i++)
          xx1=xx1+15;
          xy1=305;
          xx2=xx1;
          xy2=300;
          g.drawLine(xx1,xy1,xx2,xy2);
     int h=0;
     int counter7=0;
     yx1=-10;
     int counter8=0;
     int counter6=0;
     for (h=1;h<31;h++)
          int cpoint=com.ms.wfc.util.Value.toInt(Point[h-1]);
          int cpoint2=com.ms.wfc.util.Value.toInt(Point[h]);
          yy1=305-(cpoint*3);
          yy2 = 305-(cpoint2*3);
          yx1=yx1+15;
          yx2 = yx1+15;
          if (cpoint==0)
               yy1 = 0;
               yy2 = 0;
               yx1 = 0;
               yx2 = 0;
          if (cpoint2==0)
               yy1 = 0;
               yy2 = 0;
               yx1 = 0;
               yx2 = 0;
          g.drawLine(yx1,yy1,yx2,yy2);
          if (cpoint==0)
               for (counter6=0;counter6<counter7;counter6++)
                    yx1=yx1+15;
                    yx2 = yx1+15;
          if (cpoint2==0)
               for (counter8=0;counter8<counter7;counter8++)
                    yx1=yx1+15;
                    yx2 = yx1+15;
          counter7++;
     pictureBox1.setImage(b);
          // Erforderlich f�r die Unterst�tzung des Visual J++-Formulardesigners
          initForm();
          // ZU ERLEDIGEN: F�gen Sie beliebigen Konstruktorcode hinter den Aufruf von initForm hinzu
     * exel �berl�dt dispose, damit es die Komponentenliste
     * bereinigen kann.
public void dispose()
     super.dispose();
     components.dispose();
String DATUM="";
private void start_click(Object source, Event e)
     /**DATE**/
     java.util.Date Date = new java.util.Date();
     java.sql.Date sqldate = new java.sql.Date(Date.getTime());
     String dat = String.valueOf(sqldate);
     //datum.setText(DATUM);
     //Start von EXEL
     try
          String makro="C:\\Program Files\\Microsoft Office\\Office\\XLSTART\\PERSONL.xls";
          String cmd = "C:\\Temp\\"+DATUM+"FLIP.xls";
          //String cmd = "C:\\Program Files\\Microsoft Office\\Office\\EXCEL.EXE Gr8galry.gra";
          String line = null;
          Process p1 = Runtime.getRuntime().exec(cmd);
          Process p2 = Runtime.getRuntime().exec(makro);
          //p.destroy();
     catch (java.io.IOException e1)
          //exception.setText("error");
String Point[]=new String[31];
private void button1_click(Object source, Event e)
     close();
}

Audio driver issues... please help!

Alright,
I just purchased a new Asus computer, it's really nice... however I have Realtek HD, which doesn't seem to have a stereo option, it only comes out of the right speaker. When I try to record, it's the same issue.
Do I need to purchase a new audio driver?
Unless anyone knows how I can change the buffer size with the default "Audition 3.0 Windows Sound" to a lower number, since I'm trying to record in multitrack mode with the metronome.
I have ASIO4ALL v2 as well, but it's the same issue because of no stereo mic option...
Someone please help... several week headache.

Hmm,
Even when I have the mono mix it's recording exactly in the center... how can I get it to pan the channel or have it record in both?
Also, is there any way I can lower the buffer rate for the default "Audition 3 Windows Sound" so I can use a metronome without it delaying it?
Thanks.

LR2 and PS Eelements8 show different RGB for the same color - Please, HELP

LR2, Elements 8, Color Chart 24 (CC24),
Please help. I may need to reset LR2 to factory default or to something else.
For the following RAW adjustments the tone curve set to Linear, Contrast and Brightness to 0
I have photographed a CC24 in RAW. Opened image in Elements 8 and adjusted Exposure to 243 for the White patch #19
Then with with WB tool clicked on the 50% Gray and then readjusted exposure for the CC24 listed 243 for #19.
Now all Gray patches #19 through #24 as listed in the table or very close R=G=B (243, 200, 160, 122, 85, 52)
The RGB numbers for Red Patch #15 are R=169, G=58, B=63
The CC24 listed RGB for Red patch #15 are R=175, G=54, B=60
Also saved the adjusted image as JPG
Then opened the image in LR2 and adjusted exposure and WB as described above for Elements 8.
The Gray patches #19 through #24 show RGB numbers as listed in the table or very close.
The RGB numbers for the Red patch #15 are R=138, G=84, B=64.
However the CC24 RGB for Red patch #15 are R=175, G=54, B=60
Exported the image as JPG
Then opened the two saved JPG images in Elements. these two images read almost identical RGB numbers for each patch.
How can I fix LR2 RGB reading. Recently I have saved as defaults the tone curve set to Linear, Contrast and Brightness to 0 and probably did it wrong. My be I need to reset LR2 to the factory defaults to restore its correct reading or something else.
Please help.
Leonid

Q1. Is that means that when LR2 Exported RAW to JPG the correct numbers resulted from conversion?
You should be careful with the term RGB numbers. Such numbers are only useful when you know the working space. For example, sRGB, adobeRGB, prophotoRGB, melissaRGB, etc. The numbers I calculated are simply the reference numbers (find them here: http://www.brucelindbloom.com/index.html?ColorCheckerRGB.html ). I recalculated the values in the display space used in Lightroom from Bruce Lindbloom's values in normal prophotoRGB which is a simple arithmetic excercise. When Lightroom exports a jpeg, you can set the color space in the export panel and it will do the conversion for you meaning that it will translate between its internal colorspace and the desired export color space. In an external program, you will usually be working in sRGB, adobeRGB, or prophotoRGB, which are the three main spaces that Lightroom exports to. As you can see from Bruce's tables in the link above the RGB values for these patches in all these spaces are different.
For example RGB for MacBeth CC24 Red patch (#15) was shown as 203, 0, 0 and x-rite RGB is 174, 54, 60.
They are actually the exact same chart. As I say above the values are meaningless if you don't know the colorspace. The first RGB triplet you quote makes no sense at all. It does not correspond to any colorspace listed for the MacBeth chart. The zeros indicate that the color is far outside of the gamut of the used color space, so the value is basically useless. The second is sort of close to the sRGB value.
Q.2 Would it mean that your shown table should not be applied to (used with) x-rite CC24 but to MacBeth only?
They should be pretty good for both as the chart is supposed to be the same.
Q3. Have you created your posted LR table or it was provided by Adobe?
I created it myself. Since you have a colorchecker, you should look into creating a camera profile using it. This can be done with X-rite's excellent passport utility (free download from their website), or with Adobe's free DNG profile Editor. Simply shoot a chart in the right light conditions and run the raw/dng file through this utility and a profile is created that will allow you to get very good color rendering from your camera if you shoot raw.

HP DVD RAM UJ8DB Driver Issue, not updating, please help

Hi, I am trying to insert cd/ dvd but it does not detect any cd or dvd i found this issue today. It never showed this issue in the past. I checked on forums, opened device mangager and also tried to uninstall, restart and update or install driver for HP UJ8DB, but it doesn't fix it says windows has determined the driver software is up to date. Please help me fast i want to install antivirus software. I have windows 8.1 PC

It is not a driver issue:
http://support.microsoft.com/kb/314060
The above Microsoft article will take you through the possible issues. Does the drive show up in device manager? The BIOS?
Can you boot from it? It is likely either a corruption of the registry which the linked article shows how to fix, or the drive itself is bad and needs to be replaced. Post back to answer the questions so we can help.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Liquify Issues in CS6 - Please help!

Thanks for reading.
I'm using newly purchased Photoshop CS6 Extended, version 13.0 on a Mac OSX v10.6.8. When attempting to use the Forward Warp Tool on a somewhat low-res JPEG photo in Liquify, it seems to behave similarly to the Bloat Tool. Much to my frustration, when I click and drag, pixels seem to "bloat" continuously from the center, leaving odd circular formations and jagged edges, rather than softly smearing in the direction I'm dragging, as intended. The outcome of my strokes is completely unpredictable. No adjustments to brush settings seem to be fixing the issue. Can anyone help me?
I have used Liquify many times in the past, in CS5 and earlier versions, and haven't run into this problem until now. Even when editing lower resolution images, the Forward Warp Tool has never created this kind of ugly and useless effect. That being said, I'm a novice and have never really messed with any of the settings before aside from brush size. So, I don't know if my settings in CS6 are just screwed up somehow, or if it's a software issue.
I greatly appreciate any advice you may have to offer!
Please let me know if you need any more information in order to answer my question.

Hi NLang,
you must have an older video card (like me I have a Nvidia 120GT). CS6 liquify doesn't work well with the older cards. It creates that distortion you are seeing. What you have to do to fix it is launch liquify in non-GPU mode to get CS5 quality with your card. Hold down the option key when launching liquify. You will see a 1 pixel black border around the preview dialog box.

My iphone serial number claims to have been replaced. But it is actually not. I need to get it replaced for a screen issue ASAP! Please help

My iphone serial number claims to have been replaced. But it is actually not. I need to get it replaced for a screen issue ASAP! Please help

This was told to me by Apple Store reps... They have asked to contact Apple support help line .. nobody answers there.. I am stuck! There is no email id that i can find either to contact Apple support

Java script on off switch issue in IE, Please help

Hello;
I wrote this little script that is an on / off switch for a background sound on my web page. I have it working in all browsers accept all versions of IE. I have been pulling my hair out for weeks trying to get this script to work in IE and have only met failure. There has to be a way to get this thing to fire properly and I just can't figure out what I am missing.You can take this script, add your own sound and see how it works. It is very simple.
code:
<head>
<script type="text/javascript">
function stopSound(){
document.getElementById('PacSound').src='../video/silence.wav';}
function playSound() {
document.getElementById('PacSound').src='../video/RollerPop.wav'; }
</script>
</head>
<body>
<embed src="../video/RollerPop.wav" id="PacSound" autostart=true loop=true volume=100 hidden=true>
<noembed><bgsound src="../video/RollerPop.wav" loop="-1" volume="100" delay="0" id="PacSound" hidden="true"/></noembed>

<a href="javascript:stopSound();" >Stop Sound</a><br />
<br />
<br />
<a href="javascript:playSound();" >play sound</a>
</body>
I am so frustrated with this. I have tried a number of different approaches to this code and I always meet failure. I am trying to make it work so the page does not re-load it's self, just turns it on and or off.
Can anyone please help me figure this out?
Thank You

I suggest a search on the Internet for Microsoft and Javascript. Be as specific as you can and you might turn up a page or resource that shows what Microsoft supports.
Beth

HT1976 im trying to locate my i phone and having issues could you please help?

I believe my i phone was stolen along with my purse im trtying to track it and having issues could someone please assist me in locating it thank you.

What would the issue be? Does it say your phone is offline? IF so that means your phone is powered off.
Your phone would need to powered on and connected to internet in order for find my iphone to work.

Plugin issue with CS4 - please help

I'm trying to open a InDesign CS4 file and I get a "Cannot open file, please upgrade your plug-ins to their latest version or upgrade to the latest version of InDesign." I did the InDesign upgrade but I can not find anything on upgrading plugins. Plus what's really weird is it is saying it can not find all the Adobe pluging and I have all of them loaded.
Please help!!!

It's a CS5 file, most likely.
Bob

Serious Issues after update, PLEASE HELP!!!!

Two nights ago i did a software update. Shut the computer down everything was fine. Im not sure the software update worked properly. When i restarted the computer later that evening, all i got was the gray screen with the apple. A friend was searching forums for me over the internet while we were trying to fix it. Did the CTRL OPTION R P thing and that didnt work. Did the CTRL S and that didnt work. Next day went and bought a Snow Leapord cd. After three hours the status bar moved appx 3/4 of an inch. Took it to apple. They wiped the Hardrive clean and reinstalled Snow Leapord to it. Now it restarts and operates. However, it takes about 15 min for it to start up and get to the desktop and it runs TERRIBLY slow. It has a 500g hard drive that was put in 2 weeks ago. It also has 2g of RAM. After taking it to apple it is only showing 1.5G of RAM after the wiped the hard drive. PLEASE HELP ME!!!!!! Everything was working fabulous prior to 2 nights ago.

Well I just rewiped the hardrive clean and reinstalled snow leapord. IT WORKED!!!!!! Computer is running fast as could be, start ups in less than 30 seconds, no lagging. Im really happy as i bought this computer from a good friend and its less than a week since ive had it. I think ill just live with the ram still showing 1.5g. I think ill wait and just go get 2 4g sticks when i get around to it that way It will be as fast as possible and ill be using the ports to their full potential.

Issue in heading please help me out

Hi
I have a problem in using REUSE_ALV_HIERSEQ_LIST_DISPLAY. i have to display a heading which i build up using events.
I want to make the font size in heading bigger.
and also I want to make the subheading in bold.
please help me out
sarang

Hi,
Use alv_line-typ parameter while you guild the ALV comments.
For heading use alv_line-typ = 'H'.
For su heading use alv_line-typ = 'S'.
Hope it helps.
Regards,
Shashank

Render Issues in Color! Please help!

Similar Messages

Maybe you are looking for