Render needed after capture?

I've just captured footage off a Canon XH A1 that was shot in HD but I down converted in the camera before capturing, as I don't have an HD setup. The footage looks fine but when dragged to the timeline all needs rendering (orange). Why?
I have 4 hours of footage that will need rendering which will take forever!
Any advice would be welcome. Thanks.

Your sequence settings don't match the footage.
Use the sequence preset for DV-NTSC anamorphic and life should be good.
x

Similar Messages

17" MacBook Pro freezes after Capture to external hard drive!!!!!! HELP!!

Ok, so i just got my new MacBook Pro and Final Cut Studio last week, and i was so excited, until this happened. I was trying to log and capture a clip to my 500GB LaCie Big Disk and everything seemed to be going fine until the clip got to the end of it's alloted time and then the computer just froze. When I closed the lid and let the laptop sleep and opened it again the clip is in place and everything seems fine. I tried capturing then w/ the LaCie plugged into the FW8oo port and my miniDV Deck plugged into the FW4oo, and it froze again after capture and then worked fine after closing the lid. Thinking I was crowding my Fire Wire bus I hooked up an external USB 2.0 drive and my deck to the fire wire , but the same thing happened. So then I tried capturing to my internal and it worked fine. I've captured to an external on my 17" iMac G5 w/ Final Cut HD for years and never had a problem. Any tips? This closing the lid thing just isn't going to work.
MacBook Pro 17" Mac OS X (10.4.6)

nope, david is right on the mark. powermacs with one firewire bus choke like this. i can't understand why apple continues to design with one firewire bus but i'm not a designer. anyone, ANYONE who uses firewire harddrives and firewire tape machines/cameras for editing NEEDS to invest in a seperate sort of firewire card (pick your flavor) and then we'd see this behavior go away. then there will be those that will whine "this never happened before!" it's happening now, firewire cards a cheap insurance against these issues.

Need to capture multiple image paths for responsive design when only one will be displayed at a time

I'm new to CQ and am having enough trouble following the documentation on image components as it is (why is there no master reference for all this?). I have a requirement where we need to capture three versions of an image and put the URLs into three attributes of a tag. The appropriately sized image will be selected via JavaScript based on the browser/device capabilities. I need to know how to capture those images when seemingly only one at a time can be dropped onto the page. Or perhaps there is a more CQ solution to this.

Hi,
You need to customize image component. I mean selected image is a asset in the repository and each asset by default has 3 rendtion generated when the image is uploaded in the dam.
For example when you upload image.jpg file into the DAM, standard workflow is launched and after a while inside the repository (see paths) are created following renditions:
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.140.100.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.319.319.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.48.48.png
This process can be customized by changing /etc/workflow/models/dam/update_asset.html workflow and modifing "Thumbnail creation" step by adding in the Process tab -> Arguments field new values for new rendition. So for example if you add there [400,400] new rendition will be created in the path
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.400.400.png
Next step is to customize jsp for image component. Using path to the drag and dropped image from a component attributes you can easily take all renditions iterating on the /content/dam/project/image/yourimage.jpg/jcr:content/renditions node and then set paths to all renditions in the tag attributes. Then like you wrote using js you can select proper rendition.
I hope that it hepls you.
Regards,
Adam

Need to Capture porReqLineId from ShoppingCartPG dynamically

Hi,
My Requirement
From the Shopping Cart Page in iProcurement I have to link a custom form for each line where the users will be able to enter some additional information and based on the information some validations will be done after which the data will be stored in a custom table.
What needs to be done and what I have done till now
I have extended the Controller of the Shopping Cart Page. Created a Submit Button and added the button dynamically to each line of Shopping Cart. Set a fireActionEvent to the button. So when the user clicks on the button it should open a new custom page with the Requisition Line ID as a parameter.
My Problem
I am unable to capture the Requisition Line ID.
I have tried the following step
1. Created a Extended Controller by extending the ShoppingCartCO
2. In processRequest created a Submit Button named it as "Additional Info" and assigned it to the Table. So it will show a Button in the result table of the Shopping Cart.
3. Assigned a Fire Action for Submit Button in processRequest using setFireActionForSubmit method. So when the "Additional Info" button is clicked it raises the event set in Fire Action.
4. In processFormRequest method of the extended CO handled the event by
if ("addnInfoEvent".equals(paramOAPageContext.getParameter(OAWebBeanConstants.EVENT_PARAM))).
In this i tried to capture the porReqLineId which is a formParameter using the following
Number localNumber = 0;
try {
localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
catch (Exception e) {e.printStackTrace();}
String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
throw new OAException(outmsg,OAException.INFORMATION);
5. Then I am personalizing the ShoppingCartPG and assigning the new extended controller to the page.
6. So for the time being I need to capture the porReqLineId and pass it to the new custom page as a parameter. But this is not happening and when i click on "Additional Info" button it doesnt provide me the porReqLineId.
My Whole Code is pasted below
===================================================================
package xx.oracle.apps.icx.custom.webui;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.form.OASubmitButtonBean;
import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
import oracle.apps.icx.por.common.webui.ClientUtil;
import oracle.apps.icx.por.req.webui.ShoppingCartCO;
public class XXBBShoppingCartExtend14CO extends ShoppingCartCO {
public XXBBShoppingCartExtend14CO() {
public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
super.processRequest(paramOAPageContext, paramOAWebBean);
OATableBean otbRN=(OATableBean)paramOAWebBean.findIndexedChildRecursive("ItemTableRN");
OASubmitButtonBean oasb= (OASubmitButtonBean)paramOAPageContext.getWebBeanFactory().createWebBean(paramOAPageContext,"BUTTON_SUBMIT");
oasb.setID("addnInfo");
oasb.setUINodeName("addnInfo");
oasb.setText("Additional Info");
otbRN.addIndexedChild(oasb);
oasb.setFireActionForSubmit("addnInfoEvent",null,null,false);
public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
OAApplicationModule localOAApplicationModule = paramOAPageContext.getApplicationModule(paramOAWebBean);
String strEvent= paramOAPageContext.getParameter(EVENT_PARAM) ;
String str = paramOAPageContext.getParameter("event");
if ("deleteLine".equals(str))
Number localNumber = 0;
try {
localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
catch (Exception e) {e.printStackTrace();}
String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
throw new OAException(outmsg,OAException.INFORMATION);
if ("addnInfoEvent".equals(paramOAPageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
Number localNumber = 0;
try {
localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
catch (Exception e) {e.printStackTrace();}
String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
throw new OAException(outmsg,OAException.INFORMATION);
===================================================================
Here I also tried to modify the Oracle defined event of "deleteLine" by just capturing and printing the Req Line ID. This is happening in the case of "deleteLine" event but not in the case of "addnInfoEvent" event.
Please help me on this.
Thanks in advance.
Regards,
Rohit Subudhi
Edited by: 929000 on May 8, 2012 12:42 AM
Edited by: 929000 on May 8, 2012 1:22 AM

Hi,
I have used the following in processRequest
String pageName = paramOAPageContext.getRootRegionCode();
Hashtable params = new Hashtable (1);
params.put ("param1", pageName);
Hashtable paramsWithBinds = new Hashtable(1);
paramsWithBinds.put ("param2", new OADataBoundValueFireActionURL(oasb, *"${oa.encrypt.current.RequisitionLineId}"));*
oasb.setFireActionForSubmit("addnInfoEvent",params,paramsWithBinds,false,false);

I cant render in after effects!

an error message says "rendering error while writing to file" HELP

Hi there,
I need your support and I have of course posted it in the discussion forum already, get back ASAP please
Date: Thu, 26 Jul 2012 08:44:02 -0600
From: [email protected]
To: [email protected]
Subject: i cant render in after effects!
    Re: i cant render in after effects!
    created by kendallplant in Adobe Creative Cloud - View the full discussion
Hi there - You might want to try posting your question on the After Effects forum. The expert folks over there will be much more adept at helping you out
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4581209#4581209
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4581209#4581209. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Need to capture edited values ALV

Hi All,
Iam working with OOALV and I need to capture the edited values of ALV.
Here Iam successful by capturing edited values in first time.
i.e, Execute the program edit on row then Save I able to capture the row in PAI and I save it in dbtab and again come to alv screen and now I will edit some other row . But, this time Iam unable to capture the edited row.
Here I used check_changed_data method to capture..
Pls help me in this regard.....
Thanks,

>
> i.e, Execute the program edit on row then Save I able to capture the row in PAI and I save it in dbtab and again come to alv screen and now I will edit some other row . But, this time Iam unable to capture the edited row.
>
> Here I used check_changed_data method to capture..
are you using REFRESH_DISPLAY method.
in the data_changed after the population.
And where you are calling that method
if it is in PAI , in the beginning then that would be fine. You need to use the REFRESH_DISPLAY after the update and you need to call the FLUSH method

Frame rate goes from 24fps to 29fps after capture

I have all my footage on 24fps, DVX100A Panasonic Camera, and work on final cut pro 4.5. After my footage is capture some of the clips are on 29fps and others on 24fps... I don't know why is this happening... When I open the clips on Quicktime, even the ones that FCP has listed as the 29fps ones, the info quicktime displays says they are 23.98fps. I exported those files directly from the capture scratch folder and they go 29fps and if i drag them to the timeline they need to be renderize. I closed the program, re-opened it hoping for some magic but nothing... any ideas?? I'm on a deadline...

did you shoot 24p or 24pA. if you shot 24p you need to capture using the cinema tools preset for reverse telecine. if you shot 24pA, use the setting for advanced pulldown removal.
as well, make very sure that you edit in a 23.98 timeline, not a 24 timeline. You will absolutely lose sync if you edit 24p material in a 24 timeline.
Keep in mind that whether you shoot 24p or 24pA, you are still capturing images into the camera at 29.97fps. The 2:3:3:2 pulldown and the 3:2 (2:3:2:3) pulldown methods are a way of duplicating fields to make up for the 6 frame difference.
i.e. do the count.
Frame 1 has two fields. Frame 2 has 3 fields, one field will be discarded upon pulldown removal. if you are shooting 24pA then frame 3 will also have 3 fields and then frame 4 will have 2 fields. If shooting 24p, then frame 3 will have 2 fields and frame 4 will have 3 fields. If you do the math you'll see that, for your intended 24 frames you have 12 extra fields. That is 6 frames (2 fields per frame...) The pulldown removal removes these frames upon capture. Leaving you with 23.98 frames to edit with. Make sure you use a 23.98 timeline. The setting you changed in your preferences was for playback, since FCP assumes you are playing back to an NTSC CRT monitor (capable of playing 29.97 fps ONLY) FCP will add a pulldown for the output. THis does not affect your project. It is done on the fly by FCP.
Hope this helps.
Matt

XI needs to capture the form back in the mail adapter

Hi Experts,
I am working on a scenario where , data needs to be sent from SAP and in XI , a form sort of( like a web form or pdf form) needs to be created. This form needs to be emailed ( using the mail adapter ) to an outside entity. They will fill out the form and email it back. XI needs to capture the form back in the mail adapter translate it and put the data back into sap.
Can some one help me out with this ?
Regards,
Hemanthika

Hi patnaik
Follow these links to covert to PDf and then mailing through mail adapter
Converting Smartform into PDF and sent to EMAIL
Check this..Smartform as attachment in mail. - 46k
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/convert-smartforms-form-in-pdf-998715 - 87k
SMART form to PDF
https://wiki.sdn.sap.com/wiki/display/Snippets/ConvertSmartformtoPDFformat
smartform to MAIL
https://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment
regards
Sandeep sharma
If helpful kindly reward points

Audio and video out of sync after capture from Canon

Help for a newbie please? I have a Canon XHA1S and have a problem after capturing HD video. After capturing a 40 minute clip, the audio and video are out of sync. Seems like there is about a 3 second difference. The entire clip is like that in the source window; I made a couple of quick edits and have the same problem in the program window. Tried exiting and re-opening PP, but that didn't help. I'm running PP in CS6 on an iMac 3.4 GHz i7 with 8G of ram. Thanks!

I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

Add File Properties/Summary to render in After Effects?

Is there a way to add file description info to a render in after effects?
For instance:
I want to render out my sequence as an WMV - set up the render and output settings for that etc.
Once it's rendered I want to be able to right click on the file in Windows, click Properties, go to the Summary tab and see a specific title, let's say "Happy Bunnies" in the "Title" space in the description - Or if I open it in window media player, I want it to say "Happy Bunnies" as the title under "Now playing"
I don't want the file name to be Happy Bunnies.wmv - just the title of the video.
Is it possible to add properties like that to the output settings in After Effects? If I have 10 videos, I don't want to have to change that in all of them individually in windows - but rather add it to an output template in after effects.
thanks

Good question, but for the most part I believe the answer is No. The real question here is, how this metadata gets added and AE does not support Title, Author and so on. when you do this in Media Player, it also only exists locally in your Library until you choose to update your media information. The only AE supports are chapters. When you add markers to a timeline and enter text in teh Chapter field, it will appear in the respective menu in WMP. short of that, you will have to use otehr tools, it seems. Windows Media Encoder is free, so that would be one option otehr tools, e.g. the one bundled with Nero Burning ROM also can as can of course several alternative commercial converters.
Mylenium

Reg: Need to capture cost / energy consumption in process order

Dear Friends,
I need your valuable advices for one of the following
I have a scenario where for one of the process , we are generating Energy(heat) in in-house b y burning coal.
We are manufacturing steel Pellets , and it is continuous process at the end of the process these steel pellets are heated upto 1200DegC in furnace,
and for this we are generating energy in in-house by burning Coal on the other side.Now i need to capture this energy cost in my process order. And also i need to have shift wise energy consumption report.
So let me know how can i achieve this..?
Can we achieve by defining is as an extra activity type..? if yes , please let me know how and also necesary formula to achieve this.

1. Define New Std Value in your std value key. Say E0001
2. Now Ask Costing person to Create New Activity Type say ENG01
3. Now Decide how you want to calculate your Energy consumption will it based on you Order qty or It will based on the Machine run time.
4 Now give the std values in Routing as per Operation qty or Machine Run time
5. If is is based on Based on Operation Qty The formula will be
ENG01 = (Order Qty x Std Value of Energy)/ Operational Qty.
6. If it is Based on Machine run say 24 hr will burn 1000 joule
Then formula will be =
Machine run x Std value of Energy as in Routing.
Take help of your Costing guy to arrive at the Formula.

What type of firewire cables do I need to capture recorings from my canon xm2

What type of firewire cables do I need to capture recorings from my canon xm2

I have a:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2,4 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per core):          256 KB
L3 Cache (per processor):          12 MB
Memory:          6 GB
Processor Interconnect Speed:          5.86 GT/s
Boot ROM Version:          MP51.007F.B03
SMC Version (system):          1.39f11
SMC Version (processor tray):          1.39f11
Serial Number (system):          CK12002NHF8
Serial Number (processor tray):          J511400HYBH8C
Hardware UUID:          F51FCFBA-869D-5D70-A1F6-886A32871AA0

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

Looping audio after capture

I'm capturing into CS3 premiere pro - Cannon Vixia HV30 and HV40 cameras, HDV 1080i30 (i60) project settings.
When playing the video in the timeline after capture, the audio in many spots loops and repeats on itself. The raw captured video when played via a media player works fine. Any suggestions on audio settings or a fix for this problem. Attached is a screen capture of my project settings.
Thank you!

What do you mean by "What setting are on the media"
My media is mini dv tape with 16 bit audio.
What setting are you using in Final Cut Express 3.5?
Under Easy Setup I have used DV NTSC
Sequence Preset: DV NTSC 48kHz
Capture Preset: DV NTSC 48kHz
Device Control Preset: Firewire NTSC Basic
Playback Output video: None
Playback Output Audio: Firewire DV
PTV Output Video: Same as playback
PTV Output Audio: Same as playback
View>Video Out>Canvas Playback
What computer are you using?
Power PC G5, Proc. 1.6 gHz, Mem. 2.25 GB DDR SDRAM, OS X10.4.9, Phantom Drive External 500 G conected by USB cable.
Camera is a Sony DCR VX2100 mini DV tape connected via Firewire.
What versions?
Quicktime 7.1.6
FCE 3.5.1
Dan

At MIRO i need to capture Seperate GL

hi guys
when am doing MIRO i need to clear 90% only
the balance 10% i will clear later .It can be doing by Using Invoicing Plan Type.
For that i need to capture like this At MIRO Time
90% of Invoice amt to Vendor act
10% of Invoice amt to Rentention act
that 10% Of Invoice amt i can clear later.
so how can i configure this

Hi,
Can you try creating instalment payment terms.This is done by FI.
Thanks
Aravind
Assign points if useful

Render needed after capture?

Similar Messages

Maybe you are looking for