Render only only one side of 3d displayObject?

With CS4 is it possible to set a 3d DisplayObject to render only the front side and not the back side - like you can in papervision?

This has happened to me several times also with my powerbook. I fixed it by going into finder > Applications > Utilities and then opening Audio MIDI Setup. Apparently the audio output on my left speaker for some odd reason lowered. So even if I fixed the balance, there was no sound on my left speaker until I raised the volume from here. There's two sliders under Audio Output towards the bottom. Adjust those.

Similar Messages

  • In my iPad mini if I use earphones I can hear from only one side

    In my iPad mini if I use earphones I can hear from only one side  but the earphones work fine with other devices

    Have you tried different headphones in your iPad mini?
    Check in Settings > General > Accessibility if little slider half way down isn't moved to either side towards "L" or "R".
    If it isn't , try to reboot the device, but it's likely that your audio port isn't working correctly. If so, it should definitely be covered by warranty.

  • How can I add a stroke to only one side of text?

    How can I add a stroke to only one side of text characters?

    I'm probably misunderstanding what you want, so I'll just ask. Is this it?

  • I have an Ipod, and when I plug in my head set only one side play's; unless I play with it. Please Help

    Help please I have a Ipod touch, and when I plug in the head set only one side is playing

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Hi...! Only one side of audio working...?

    Hi! On my Ipod mini, only one side working (did a search in here , but found nothing that could help) is there anything I could do?
    Thanks!

    I had this same problem last year. But recently the entire sound blew out. I've tried other people's earbuds and spare headphones I have, but nothing works...It must be an iPod issue. I've been looking all over for a solution, nothing works.:(

  • TS1630 My speak the voice came out only one side another side mute

    I just bought iphone 5 2days ago and i found something wierd with my speaker, when i plsy music or youtube or whatever but the sound come out only one side of speaker. Left speaker can't hear anything, is it normal?? Or it broken?

    There is only one speaker.  The left side, next to the headset jack, is a microphone.
    Matt

  • Canon MR-14EX II only one side fires

    Hello guys! I'm sure there is a simple solution to my problem but I can't figure it out myself. I've purchased Canon MR-14EX II Macro ring flash and when I try to take pictures, only one side of the flash fires. What am I doing wrong? Thank you!
    Solved!
    Go to Solution.

    I have Ver 1 and had an even older model so I suspect setting are similar. Check your manual for the section on "Setting the Flash Ratio". You can turn off either side should you want to, which may explain your problem. .
    "A skill is developed through constant practice with a passion to improve, not bought."

  • Please help! t61p: bluetooth stereo headset sound coming from only one side?!!

    Just bought a X5i stereo bluetooth headset (A2DP protocol) from BlueAnt and paired it with T61P.  The laptop recognized it and it connected to it.  When i started playing audio though, the sound is coming only from one side of the headset.  Do I need to update the bluetooth drivers for lenovo??  What do i need to do?  Please help!

    Hi Ledbroke,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv2700 Notebook and having sound issues when headphones attached. Here is a document on troubleshooting audio problems with external speakers, headphones, and HDMI sound devices. Under the two quick test section it shows you how to troubleshoot headphones.
    Hope this helps.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Enabling BFD in only one side

    Hi Everybody
    The theory tells that if BFD stops to receive keepalives, it informs to the routing protocols that the neihgbor is down. If I configure BFD only in one side and associate BFD with the routing protocol, the neighborship goes down?
    Thanks

    Hi,
    You need BFD on both side but you could use echo mode on one side only.
    I tested it with 12.2(33)SRC2, and configuring BFD on one side only doesn't bring down the IGP adj. The BFD session stays in AdminDown state.
    HTH
    Laurent.

  • The printer box shows "auto rotate" , but it prints only one side.

    HP laserjet model

    "Auto Rotate" generally refers to automatically selecting portriat or landscape printing.  For two sided printing you want to print Duplex.  Some printers have automatic duplexers and can print both sides of the page automatically, others support only manual duplex where one side is printed, then the pages are reloaded in the printer and the back side printed.
    Please read this post then provide some details.  What printer model? What operating system?
    The Vista/Windows 7 Duplex Printing Troubleshooting Guide here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Stroke only one side

    Hello i would like to do one-side border around to iteam.
    I cant find out any property in flex/as reference how to apply stroke only to one side of element.
    would be glad to hear any tip from you,
    Thanks
    jbeynar

    Hi beynar,
    You can use the borderSides property to specify the border sides...as shown below:
    <mx:Canvas width="400" height="400" borderSides="[left,right,top,bottom]" />
    <mx:Canvas width="400" height="400" borderSides="[left,right,top]" />
    <mx:Canvas width="400" height="400" borderSides="[left,right]" />
    <mx:Canvas width="400" height="400" borderSides="[left,right]" />
    You can apply borders to any of the one side...
    If this post answers your question or helps, please kindly mark it as such.
    Thanks,
    Bhasker Chari

  • HT201401 Lighting cable only one side can be charged?

    Why my lighting cable can be use for data transfer in both side
    But only can be charged the power in one side only?
    It is my problem or?
    Design by apple?

    I tried that first.  It didn't get the gunk that was in the bottom of the port.  The toothpick popped it right out in one piece.  Took almost no pressure at all.  I was worried that I would hurt something with the toothpick so I gently inserted it at one side and then slide it to the other side of the connector sorting of feeling it out.  It came out with a big block of gunk from the bottom of the connector.  I was just probing the connector to see if the toothpick would fit.  I really hadn't made any effort to clean anything yet.  I I was amazed at how much gunk there was.  I keep my phone really clean but I guess my pockets are another story...

  • HT4528 Only one side of my ear buds works with music. what can I do???

    what do I do???

    Also check Settings>General>Accessibility, under Hearing be sure the audio slider is centered and not offset to one side.

  • Ram issues-reading only one side

    My Lombard tells me i have 192mb of ram so i always figured 128 in the top, and the original 64 in the bottom. I went to check out some ram upgrades today at the shop to get upto 512mb. When we opened it up to test the new ram, we learned that i do have 128mb in the top, but there is already a 256mb in the bottom. So for some reason my comp is only reading half of each card. We even tried the new ram card and it also only read half of it. We tried different combonations and it didn't change. Its only reading half of each ram card.
    Anyone have any ideas why or what i can do about it? Thanks for any suggestions.
    Blake

    Hello, So i have taken it apart and played with it a bit more.
    First of all, each ram card has 4 black boxes (modules) per side. So maybe thats a bad sign right off.
    The one card still has a sticker on it from where it was purchased, it reads PC133 , Ibook 256 Wilkins Technology. The modules are Samsung but i think the board is not.
    The other card looks physically about the same, i am assuming that its a 128 because both slots consistantly read 1/2 of which ever card is inserted, in this case reading 64. The modules on it are Samsung and the board also appears to be Samsung. Its sticker reads Samsung Korea 9926. If this card is in the computer alone in either the top or bottom slot, the computer will not boot up. It just gives me an icon with the finder logo flashing to a ? on it.
    The 256 card will allow the comp to boot up no problem when its the only card installed, and the computer will show 128mb if this 256 card is in ether slot. And if i add the other card (that cannot work alone) than it adds another 64mb to the total giving me 192mb total. And this is consistant with the cards in either slot.
    In summary, the 128 card will not work alone, in either slot. But if the other card is installed, the 128 card will provide me with 64mb more ram, installed in either slot.
    Pretty weird...
    Could this have anything to do with needing to upgrade firmware? Probably a stupid question but just a thought...

  • DV6 1319tx- Audio coming from only one side.. Help!

    Hey ppl i jus bought HP Pavilion DV6 1319tx yesterday. I jus noticed that audio is comin from only the left side of the speakers and i have even checked usin the volume control.. There is no output from the right side.. What to do?? Is HP customer service a good one.. Will they replace it soon or will they keep the laptop and return it later.. plz help ASAP!!

    Ah, I see. I just used 'Pan' and set it from -1 to 0. Cool.
    This can be deleted or left for reference, I don't care.

Maybe you are looking for