Render Playback Premiere Elements 11

How do I reset the render playback in Premiere Elements 11? I don't want it start playing from the beginning of the project after the render is complete.
Thanks.

Steve,
I don't see it. Can you be more specific? Which heading is it under?
Thank you!
Michele

Similar Messages

Timeline won't render in Premiere Elements 12 (and music video editing advice)

I have a section of video I'm editing that won't render. I've read some similar threads but still have a question about how I can edit the clips to 'force' a render.
I'm running PE 12 on a Core i3 laptop running Windows 8, so not a huge amount of processing power. I don't have an orange line above the timeline over these clips and I understand PE has decided that it's already giving me the best possible preview quality and doesn't need to render this section. However, it's four quick edits in time to some music and when I preview it back my computer clearly can't process the video and audio fast enough because I get very jerky video so I can't verify that the cuts are perfectly aligned to the drum beats.
I've been exporting the whole four minutes just to review about five seconds of video in the middle to make sure it's synched, and this is getting really frustrating as I'm having to make frame by frame adjustments to improve the sync.
Is there anything I can do to each clip, like adjust an image setting, to force PE to give me an orange line and want to render this section?
Just as an aside to anyone who edits music video type clips - if you're making, say, four quick cuts to four drum beats in a bar, do you find the audio/visual sync works best if the cut is on the frame the drum beat attack starts on, or does it seem more natural if it's one or two frames after the initial attack so it's 'mid drum beat'? I'm tending to find just after the initial attack looks/sounds better for me - but maybe that's something to do with the delay in my PC processing the frame!
Thanks for any advice,
Chris.

Chris
Please excuse the questions, but I did not want to take anything for granted...are you sure that you are looking above the Timeline content for the render indicator line? Assuming that you are OK with that.....
Are the gray tabs of the Work Area Bar placed so that they span the entire content of the Timeline, including this five second content which you say cannot be rendered. Remember rendering does not fix problems, rather it is a preview that helps you to realize that a problem exists sooner than later. Consequently, please confirm if an orange line persists over that five second content even if you press the Render key above the Timeline.
Have you expanded the Timeline content to the maximum with the Zoom Out Zoom In Slider above the Timeline get the best look at the content on the Timeline in contrast to get the best possible preview in the Edit area monitor?
Have you gone to Edit Menu/Project Settings/General and set the Audio Display Format to Milliseconds if you are involved in audio edits?
Have you been nudging audio in sync with video using shortcuts, such as...
As you hold down the Alt key of the computer main keyboard, tap the left or right arrow key once (one tap = 1 frame nudge)
As you hold down the Shift+Alt keys of the computer main keyboard, tap the left or right arrow key once (one tap = 5 frames nudge)
I would suggest that exploration and experimentation are the best tools with which to work to achieve a specific effect for your specific
situation.
Please review and then let us know if any of the above targets your questions about your workflow.
Thank you.
ATR

Has Premiere Elements 12 fixed the jittery playback issues from CS4?

I use Premiere Pro CS4 to edit my videos. I shoot with a Canon DSLR the 60D and import the video files straight into Premiere Pro without the extra transcoding step. (too much trouble to transcode the raw video with every clip). I get jittery and jerky motion in the left hand Source Monitor, when I make my in and out point edits. It plays fine once I have made my edits and render them in the right hand Program Monitor. I have heard that this has been fixed in version CS5 and higher. I can't afford to buy the CS program again, but could purchase Premiere Elements 12 the latest version. Would the jittery playback still be there in the left Source Monitor window of Elements 12, or has it been fixed in all forward versions newer than CS4?
Also if there is a way to make the imported video play smooth in the Source Monitor directly from CS4, without the transcoding process, I would like to hear about that for sure. Thanks for your help guys. Ken in Toronto.

Ken
I am surprised that the Premiere Pro group did not answer your Premiere Pro question before transferring your thread to the Premiere Elements Forum. The Premiere Pro question seems to be the immediate one. Your question seems to have been ignored by the Premiere Pro people
Also if there is a way to make the imported video play smooth in the Source Monitor directly from CS4, without the transcoding process, I would like to hear about that for sure.
An answer to that might avoid you having to get involved with a new program, Premiere Elements 12.
Nonetheless, I cannot offer you any guarantee about editing 60D footage in Premiere Elements 12. I would need lots of details of your specific video properties and computer environment to approach an answer. Your best and quickest answer will come from downloading and installing Premiere Elements 12 and determining its compatibility in your computer environment and if it meets your video editing needs.
ATR

Premiere Elements 11 crashes during playback after adding PiP

I have Adobe Premiere Elements 11, up to date, and Windows 7 home up to date. This is a new problem that just started with my most recent project. I have done these types of edits and PiP's many times with success with the same type of source video formats, etc.
The problem: I add a small clip of video over the main video timeline as Picture in Picture. It adds to the timeline successfully and I can even play it back ok (before rendering). If I add a transition to the front of the PiP, it will crash during playback (pre-render). Or, if I render the timeline before adding the transition, it will also crash during playback once it gets to the PiP.
I tested PiP with still pictures and that works ok, it only crashes on video PiP. I have tested different video formats (from GoPro and from Panasonic camcorder) with the same results (crashes). I have uninstalled Adobe Premiere as well as Quicktime and re-installed them, same results. I am quite frustrated with the constant crashes, especially since I have done a dozen or more videos the same exact way using the same cameras and same types of video files.
Any help is appreciated.
Justin

So I created a new project using the project preset "DSLR 1080p30 @29.97". Everything worked fine in that project using the same source videos and doing PiP (tested with both methods).
I opened the project that was giving me problems and the PiP worked when using your approach of dropping the PiP clip onto Video 2 then scaling it down. I then deleted that PiP and re-added it the way I was doing it before, and it crashed the first time I tried to play it back.
I closed down Elements and again tried to reproduce the crash the same way, but this time it worked and did not crash...I tried multiple times to reproduce the crash, sometimes it would, sometimes it wouldn't...
So, I don't know exactly what the problem is. Lastnight I could reproduce the crash every time by either rendering the PiP or adding a transition to the front of it (then playing it back), every time it would crash. Now it is behaving differently.
At any rate, I will start using the correct project settings going forward and know that I can PiP using the other method as well. Maybe the project that is giving me problems is just corrupted or something, I'll toss it an start anew.

Choppy playback in Premiere Elements 12

Hey,
Okay so I'm trying to create a short film for a class assignment and I'm having trouble viewing back the footage I have. I've been told to look into rendering my footage but I'm not getting a orange band above to render it with. I am aware that if there isn't an orange band then the program has 'decided' that I'm getting the best footage I can get but it's not helping the fact that the footage I want to edit is all choppy.
How can I fix this? I need to know as soon as possible please. Thank you.

Jerky or slow playback http://forums.adobe.com/thread/1071217
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•How many and what speed are your hard drives?
•Which version of Quicktime do you have installed?

Premiere Elements 11 wont render work area???

Hi, I'm having an issue with Premiere Elements 11. I'm workng on a video project, and I need to render my timeline for smooth preview playback, but everytime I hit render, it just plays the timeline, without rendering anything. That little box doesn't come up or anything.

For the couple that do have the orange line and rendered, that is normal. And, you are saying there are those with orange line over content, that will not? And, they are all supposed to be the same footage?
No, the ones that have the orange line as normal WILL render as normal.
There are several clips for this video, all recorded with the same settings with the same camera, but only 1 or 2 that will render properly. The others have no orange bar at the top like they should.
There are gray tabs in the WorkArea Bar above the Timeline. They should be spanning the content on the Timeline. Is any of your Timeline content no being spanned by the setting of these gray tabs of the WorkArea Bar?.
I'm afraid you lost me there. I'm not sure what you mean by "spanning'".
As for your workaround, what is your export choice and settings so that you get footage for a subsequent project, footage that performed better than the original?
720P 29.97, H.264, AAC 48kHz in quicktime format.
It renderd pretty much lossless (or if there is loss its so subtle that I can't see it) But apperantly my system can handle it better that way then it can footage right off the iphone.
Have you taken the time to look at the properties that you are putting on the Timeline, such as, video and audio compression, frame size, frame rate, progressive or interlaced, file extension, pixel aspect ratio and such? Your App needs some looking at. Does that iPhone have a variable frame rate? Lots of questions that may or may not have anything to do with this specific rendering issue, but probably do as regards the prognosis for your overall project.
The setting on my app is "1280x720" resolution, and 30 fps. I can adjust fps down all the way to 1fps if I want to (idk why I'd want to do that, lol) but I normaly shoot at 30, and thats what these where shot at.
If you have a screenshot of the Timeline track content that will not render (with the orange line over them), please post in your next post. It would be helpful to review your overall Timeline setup.
http://imageshack.com/a/img545/1383/eb68.jpg
http://imageshack.com/a/img266/6277/94g3.jpg
Hope that helps.
Iphone won't edit easily because it uses a variable frame rate
- A possible fix in message #22
Well, the app is set for 30fps. Besides, that fix wont work cuz I don't have quicktime pro.

Is there a way to create and edit a video in portrait mode / 9:16 in Premiere Elements 12 or 13. Playback on an iPhone in portrait position.

I'm editing iPhone app video for posting as the first screen in the Apple app store. Required size for the video is 750:1334, 9:16. I there a way to setup the initial video in portrait mode? Many posts for how to rotate a specific clip, but I need the whole video in portrait position. How to accomplish this? I'm using Windows 7 and Premiere Elements 12 and now 13.

LaurieFrick
Thanks for giving this portrait Edit area monitor shape a look.
I have Windows 7 64 bit and Windows 8.1 64 bit and have done the work using Premiere Elements 12/12.1 on Windows 7 64 bit.
Here is a step by step
Find the DSLR [email protected] file
Local Disk C\Program Files\Adobe\Adobe Premiere Elements 12\Settings\SequencePresets\NTSC\DSLR\1080p\
And, in that 1080p Folder is the DSLR 1080p30@ 29.97.sqpreset file that you seek.
1. Copy the
DSLR 1080p30@ 29.9.sqpreset fileI
and paste it to the computer desktop in a newly created folder named 1920p.
2. Open the 1920p Folder and edit the ..sqpreset file in Notepad.
To do that right click the .sqpreset, and, from the pop up, select Open With and then Notepad.
3. In the Notepad document, you are going to edit in only 2 places for now, switching 1920 and 1080 to 1080 and 1920 at the top and bottom
sections of the Notepad document.
Then go specifically File Menu/Save of the Notepad document and hit Save.
4. At this point, you have the edited.sqpreset file in the 1920p Folder on the computer desktop.
(Change the name of the edited .sqpreset file so that it = DSLR [email protected])
Move the 1920p Folder from there to add it to the 1080p Folder, the location where you found the original .sqpreset file that you edited.
Close out of there.
5. Back in the Premiere Elements 12/12.1, manually set the project preset to the new project preset
6. When you import your 1080 x 1920 9:16 video file into the project and drag it into the Timeline, you should see
Note that there is no orange line over that Timeline content, indicating that you are seeing
the best possible preview of the image.
7. As I wrote before,
But, here is the hang up. If I render the Timeline content to get the best possible preview at the Edit level, the video in the Edit area monitor
squeezes in resulting in black borders to the left and right of the video image on screen.
But, otherwise I found I had no problems editing or exporting, just had to keep away from Timeline rendering for previewing after an edit. Need to find the missing ingredient for 100%.
I will be writing this up in my blog in a more organized fashion including how I got the project preset description in Change Settings to agree with the changes. Probably I will do that in the morning.
ATR

Premiere Elements 12: What happened to Playback Settings?

Cep has posted a thread today asking where are the "Playback Settings" choices that were present in Premiere Elements 11 in two places
a. Edit Menu/Project Settings/General as a Playback Settings button
and
b. The Playback Settings dialog that appeared after right clicking the Edit Mode monitor and selecting Playback Settings.
http://forums.adobe.com/message/5779204#5779204
The Playback Settings button is gone completely from the Project Settings location; whereas, the Playback Settings choice in the monitor area is still there but greyed out.
I have confirmed Cep's results with Premiere Elements 12 on Windows 7 64 bit as well as Windows 8 64 bit (the operating system that Cep is using).
We both have Premiere Elements 11 and Playback Settings in both locations cited are still alive and well there.
Does anyone from Adobe or elsewhere have an explanation for this. I have not found any related information in the Premiere Elements 12 Help PDF and have explored and experimented with alternate locations for Playback Settings in version 12. No luck.
Looking forward to follow up on this. What am I overlooking in the search for Playback Settings?
Thanks.
ATR
Add On...As one point of reference, please note Adobe's write up on "Preview on a TV Monitor"
https://helpx.adobe.com/premiere-elements/using/previewing-movies.html

Update....
No word from Adobe who would know for sure, but...
On a lead from a Premiere Pro CS6 thread that run into missing Playback Settings or grayed out Playback Settings in Premiere Pro CS6 version as well, we tried creating the keyboard shortcut Alt+Shift+P to access a possibily hidden "Playback Settings", no success. (See Premiere Elements 12 Windows 7 or 8 64 bit, Edit Menu/Keyboard Customization/Windows/Monitor Window/Playback Settings.)
http://forums.adobe.com/message/4412697
At this point, the Playback Settings button in preferences and the Playback Settings choice in the monitor as we knew them in Premiere Elements 11 appear to be gone.
More later.
ATR

Premiere Elements 12 - Gaps in audio playback

Hello everyone!
I have a problem with Adobe Premiere Elements 12: when I play video in timeline or preview window, there are lots of gaps and pauses in audio playback, even though video is playing smoothly. Usually the pattern goes like this: 2 seconds of clean audio - 0,5 seconds silence - 2 seconds of clean audio... etc.
I have tried the following:
- change audio buffer settings
- change audio device (I have tested with integrated audio chip ("High Definition Audio"), M-Audio Fast Track Pro and cheap USB audio interface - same results with all of them)
- start a new project with correct settings and import only one file
- disable background antivirus monitoring
Usually source material is AVCHD 1440x1080 25fps (PAL, MTS-file) from small Sony camera, but this problem seems to continue even if I insert only still photo and mp3 audio to timeline. CPU load is about 6% during playback. It seems like Premiere Elements makes these gaps to playback signal before sending it to audio hardware?
Computer specs: Intel Core i7-4770 @ 3,4GHz, 16 GB RAM, 128GB SSD drive for OS & software and 2.0TB 7200 rpm drive for video, Intel HD Graphics 4600, Windows 8 (64bit).
I would be really grateful if someone could give me some tips to solve this annoying audio playback problem.
EDIT: I forgot to mention that this problem occurs all the time - even when video is rendered in timeline.

Thanks for the quick response, TonyPh12345. Clearly not what I was hoping for but not unexpected. BB

Adobe Premiere Elements 11 - HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

I'm using Adobe Premiere Elements 11, on a Windows 8 PC and when I "render" still pictures, some videos and simple effects -- they lose quality and get grainy --
HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

Molnar are you receiving that error during the download or install process? Also which operating system are you using?

Video playback on Adobe Premiere Elements 8 no longer works

Windows 7 Professional 64 bit OS
Lenovo T420
i5 Second Gen Proc
8GB RAM
Premiere Elements 8.0
Latest Version Update and Driver Update Installed
Majoirty of video pulled from Flip Camera
What other information is necessary?
I've been working on a video for the last couple of months, and have about 15 minutes of footage. Recently when I opened up the project to work on the last 25% the playback feature stopped working (no sound or audio when play is pressed). I noticed that background rendering was disabled so I re-enabled it, but I am still facing the same problem. I've saved my video in several formats including AVI in hopes that I will be able to finish it at a later date. I am only slightly technical, so please don't waste your time correcting me (I'm sure I've made several mistakes and provided information that is not pertainent to the issue at hand)! Just looking for help, so I can finish my project.
Thank you in advance!

Great news, and actually much better than I had expected - kudos to Lenovo!
Video (and audio) drivers are very fragile things. In regular computing, they are only moderately important, but with programs, like PrE, 3D and CAD apps., the program must interface very deeply with the video driver, and it must be stout. There are many things that can "break" the video driver, and a common one is OS updates. Most Windows OS's are still set on the default update options - fully automatic. This takes place behind the scenes, and the user is seldom aware that the OS has been updated at all. Suddenly, a program like PrE stops working correctly, while most other programs seem to be just fine. Immediately, the user looks to PrE, which is **** just what it did before the OS update - running perfectly fine, but between the program and the Video sub-system, that driver has broken, so things go wrong.
One workaround is to use a System Restore Point, from before the OS update that broke the driver, BUT OS updates are a very, very good thing. Catch-22, if one cannot install an updated driver, that works well with the update status of the OS.
Glad that you found a better solution - new and improved video driver. While you are at it, you might want to check for a new audio driver too, as they are just as fragile, and can bring PrE to its knees.
Good luck,
Hunt

No video playback in premiere elements 12

No playback after a few mins of editing. Tried most of the potion in the adobe troubleshooting section (http://helpx.adobe.com/premiere-elements/kb/troubleshoot-digital-video-playback-premiere-2 .html) but never got anywhere. Most options listed are for Windows. I have an almost new Mac with all the system requirement to run Elements 12 . HELP, PLEASE

bjgarciac
I am strictly an Elements Windows user, but I do try to find common ground between Premiere Elements 12 Windows and Mac as a first pass at troubleshooting issues like the one your present.
1. What are the properties and duration of your source media?
Video compression
Audio compression
Frame Size
File Extension
Frame Rate
Interlaced or Progressive
Pixel Aspect Ratio
Brand/Model/Settings for Camera which recorded the video would help.
2. What did you or the program set as the project preset based on a match of project preset with properties of the source media?
3. What have you done in the way of edits after which you have problems? What is the duration of the TImeline at that point? Is this a multi track project?
Please explain "playback stops"
a. The TImeline Indicator will not move from the start of the Timeline when you press Play in the Edit area monitor?
b. Playback stops after playing back about few seconds of the Timeline content
c. Other
Do you have the Work Area Bar gray tabs set to span the whole content of the Timeline?
When you are playing back your Timeline in the Edit area monitor, does your Timeline content have an orange, green, or no colored line
over its duration?
4. Are you running a dual or single computer monitor setup? If you right click the Edit area monitor and select Playback Quality is there any
difference in the problem whether you set for Highest instead of Automatic?
5. For this type of video and this type of project, would you class this problem as
"it worked before but not now" or "it never worked before".
Thank you.
ATR

Premiere Elements 11 - No audio on playback using MP4 or MOV video files

Hello,
I've recently started using Premiere Elements for a project I'm working on and I'm learning as I go.
When I'm adding a video that plays audio in another program to Premiere, the audio won't play.
I've checked the audio and audio hardware settings and they both seem fine. The mixer is not muted and when I publish the file, there is still no audio.
Any help or suggestions are appreciated.
Thanks,
Dale

DovSolomon
I am assuming that you are working with Photoshop Elements 12 and Premiere Elements 12. On what computer operating system are they running?
Can you open your .avi file in the Elements Organizer 12 and playback the file there and hear audio in the playback?
We have just helped a Premiere Elements user resolve a no sound with .avi file in another thread. Her answer was to update Premiere Elements 12 to 12.1 (See opened project Help Menu/Update.) Why is there no sound on avi files?
The details are in the link cited in my conversions with the user Vickie.
The full video and audio properties of the problem files are needed to evaluate situation such as you describe. In the case of the other user, she was not able to give us anything beyond .avi file. But, fortuately that 12.0 to 12.1 suggestion came to the rescue nonetheless. Bottom line is that, if the 12.0 to 12.1 Update does not resolve your issue, then we will need to go "by the book" and gather file properties, project settings, and the like to try to target the cause of your audio issue. Have you added to this project any narration clips from the program's Narration Tool?
If you create a new project, can you hear the audio from this .avi file in it? Is the problem confined to one .avi file or to any of these .avi files that you import into new or pre-existing projects. Can you hear the audio from non .avi files?
Looking forward to your follow up.
Thanks.
ATR

No video playback in Premiere Elements 10

Hi,
I've got something I can't solve here. I cannot playback any video in Elements 10 on win 8.1. It was originally a Canon .MOV recorded on a G12, and i could hear audio but see nothing. I then converted the file to a AVI, MP4, etc...and got nothing. So I went to my archive and loaded up some other files that had been working with the same program on Win7, nada. Then I tried various random videos, .flv etc.. Then tried to run videos previously created with this software.
I also tried Win7 compatibility mode, and run as Admin.
All of the above videos played fine in various video software.
Any ideas?
Thanks,

Candy
What is the video card/graphics card that is being used by the computer with your Premiere Elements 10? You may a Premiere Elements 10 user hit by the NVIDIA video card issue which requires a roll back of the driver version rather than assuring the you have the latest version of the driver installed. Please check out the following thread on that possibility.
http://forums.adobe.com/thread/1317675
By the way, flv files never have imported into Premiere Elements (any version). However, you can export a Premiere Elements Timeline to a .flv file.
Do you have the latest version of QuickTime installed on your Windows 7 (assumed 64 bit) computer?
We will be watching for your follow up with more details of your situation.
Thanks.
ATR

Premiere Elements 12 will only render some of my footage?

Premiere Elements 12 will only allow me to render some of my footage while it won't render other footage at all. The footage it renders has a green line above it in the work space and no line is above the footage that won't render. I'm using a MacBook Pro and a LaCie external hard drive to import my footage and save my project. Any suggestions? Thank you!

1. Premiere Elements 12 on Mac. Have you updated from 12 to 12.1 yet - Help Menu/Update within a opened project? If not, please do so.
I updated to 12.1
2. What are the properties of what you are putting on the Expert workspace Timeline?
Especially, if at all, how do the properties of the files displaying no Timeline lags and stops compare to the properties of the files that are presenting with Timeline lags and stops.
All of the content is in .mov format
3. What are you or the project setting as the project preset? To confirm, please tell us what you find Edit Menu/Project Settings/General and the Editing mode, Timebase, Frame Size, Pixel Aspect Ratio readings, even if they look grayed out?
Editing mode is "HDV 1080i"
Timebase is "29.97 frames/second"
Frame size is "1440 horizontal 1080 vertical"
Pixel Aspect Ratio is "HD Anamorphic 1080 (1.33)"
4. What is the duration of the Timeline when the lags and stops begin....are these lags and stops related to the time on the Timeline or to specific files....if these problem files were moved to another part of the Timeline, would they still be problem files?
The lags and stops begin at approximately 24 seconds of the timeline, but when I move this content to another part of the timeline the lags and stops begin where this first problem file begin. The lags and stops are most likely related to specific files, however that doesn't make sense since some .mov files don't lag/stop while other .mov files do lag/stop. The files are still problem files even when moved to another part of the timeline.
5. Are there transitions applied to the Timeline content? What effects are you adding to clips?
There are no transitions applied to the timeline content. I've only added a fast-forward effect to one clip (a clip that rendered fine and doesn't lag/stop) in my project thus far.

Render Playback Premiere Elements 11

Similar Messages

Maybe you are looking for