Render Problem HELP!

I have had this problem before and no matter what I do, I must be missing something because it never gets resolved. I make a new project, I import my video quicktime. I create a new sequence and get the question box asking if I want to change the sequence settings to match the clip because they don't match. I say yes. And yet my clip still needs to be rendered. I compare the sequence settings and the clip settings and as far as I can tell, they are exactly the same. So why do I need to render? This is very frustrating because that should solve the problem. Thank you for any help!
Also, here are my settings:
Vid rate 23.98 fps
Frame Size 853 x 480
Compressor DVCPRO50 - NTSC
Pixel Aspect NTSC - CCIR 601
Anamorphic

Thank you! When I looked at the inspector in the QT player, it said
Format: DVCPRO50, 720 x 480 (853 x 480)
Current Size: 853 x 480 pixels (Actual)
I have no idea why it says 720 x 480 there and not in FCP in the settings. Do you know? That little hidden bit made all the difference. Once I changed that in FCP in the sequence settings, it doesn't have the red render bar (although the green one is there now.)
I was given the QT by someone else to work with, I thought it was a bizarre format to give me. I copied it from a HD to my computer.
Thank you again, it's always something really simple in the end. I never thought to look at the settings outside of FCP to figure it out.

Similar Messages

  • JTable cell render problem, help!

    Hi all,
    I'm trying to change the color of some cells in a JTable. I have the definition of what cell to render in a different color in a Vector. So each time the cell render is called, I check if the cell it's in my vector, and if yes I change the background color to red.
    The problem is, the result are not the desired, some cells are some times in red other times in red! Some one have an idea of what appends?
    Thanks NeuralC
    public Component getTableCellRendererComponentJTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
    Component cell = super.getTableCellRendererComponent( table, value, isSelected, hasFocus, row, column);
    for(int i=0;i<((LinhaRefresh)RefreshOjb.elementAt(row)).Gamas.size();i++){
    if(((column)>=((Gama)((LinhaRefresh)RefreshOjb.elementAt(row)).Gamas.elementAt(i)).inicio) & ((column) <=((Gama)((LinhaRefresh)RefreshOjb.elementAt(row)).Gamas.elementAt(i)).fim)){
    cell.setBackground(Color.red);
    return cell;
    cell.setBackground(Color.white);
    return cell;
    }

    Hi,
    AND symbol is &, and I must use it.
    I haved solved the problem, extending my cell render to a JLabel. With this and making my self the selection color everything works fine.
    Thanks for interrest.
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
    JLabel lb = new JLabel((String)value);
    //Component cell = super..;
    setText((String)value);
    if(!isSelected){
    setBackground(Color.white);
    else{
    setBackground(Color.blue);
    for(int i=0;i<((LinhaRefresh)RefreshOjb.elementAt(row)).Gamas.size();i++){
    if(((column)>=((Gama)((LinhaRefresh)RefreshOjb.elementAt(row)).Gamas.elementAt(i)).inicio) & ((column) <=((Gama)((LinhaRefresh)RefreshOjb.elementAt(row)).Gamas.elementAt(i)).fim)){
    if(hasFocus){
    setToolTipText("est� dentro"+column);
    setBackground(Color.red);
    return this;

  • Render problems

    Hi,
    I have serious render problems with Premiere CC. I't wont render at all. Crashes down every time with a window saying occurred serious problem...
    The file that i've been working on is heavy with AE direct links and above adjustment track.
    Im working station is Mac Pro Mac OSX 9.2.
    So I assume having this machine Premiere will run smooth.
    But on contrary I cant touch my files because it will crash down.
    Can anybody have any suggestions that are not exporting all my AE files as movie clips and reedit the whole video again.
    Thanks! 

    I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
    Mac and Root User http://forums.adobe.com/thread/879931
    -and http://forums.adobe.com/thread/940869?tstart=0
    Mac & nVidia Driver http://forums.adobe.com/thread/1075592
    -and http://www.nvidia.com/object/mac-driver-archive.html
    Mac Retina Bug http://forums.adobe.com/thread/1159632
    Troubleshooting guide for Mac freeze
    http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
    http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0
    OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html

  • My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

    My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

    Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

  • I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

    I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad/iPod into Recovery Mode
    http://support.apple.com/kb/ht4097

  • IPad syncing problem - HELP!

    iPad sync problem - HELP!  I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)"  and yet I seem to have plenty of space on the iPad.  This just started today.  I even tried deleting some things to make even more room, but it didn't help.  Any ideas??? 
    I was thinking of restoring, but I've never done it...  should I? 
    thank you!

    Hello florafromnv,
    Welcome to Apple Support Communities.
    The following article addresses how to resolve the issues related to this message:
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/TS1503
    Regards,
    Jeff D.

  • MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

    This topic has been moved to Overclockers & Modding Corner.
    KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

    Not that I am an expert o/c but here are some thoughts on the matter.
    My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
    This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from. 
    With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
    Hope this helps

  • Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

    Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

    i have installed photoshop elements 12.
    when I try use the editing features it said that i must login to Adobe to register the product.
    but each time i try to it said there is a problem.
    help
    the problem stated that the internet is not connected, but that is not the case.

    I had the same issue and I'm running Windows 7.  Tried working with technical support for several hours but they were no help.  They just had me doing the same things over and over, offering no real answers.  I finally got fed up and have decided to return my product for a full refund.

  • I can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys

    i can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys??  i don't know what to do..

    Why are you unable to install the iPod Updater? Are you getting an error message? Please be specific.
    Cheers!
    -Bryan

  • Camera (focus) problem - help?

    Duplicate post, please see: Camera (focus) problem - help?
    Message was edited by: Admin Moderator

    Warranty is valid only in country of original purchase. You have to return
    the iPhone to the US for evaluation. Either you return it personally or send
    it to a friend/relative/co-worker in the US to take into Apple. Apple will not
    accept international shipments for evaluation nor will Apple ship out of the
    country after repair/replacement.
    Have you tried the standard trouble shooting steps: restart, restore, restore
    as new iPhone?

  • After update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

    after update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help 

    Connect your phone to iTunes on your computer like the diagram has indicated and restore the phone

  • Has CS6 fixed the PPro with AE dynamic links slow to render problems?

    I've got PPro with AE dynamic links slow to render problems similar to those discussed in this thread:
    http://forums.adobe.com/thread/904652?start=0&tstart=0
    As I understand it (and I could well be wrong), if I render a PPro project that has AE projects dynamically linked in (anything from simple lower thirds to color grading), during rendering the AE bits run as a service, which limits the AE bits to a single CPU and effectively stops simultaneous rendering of multiple frames. This is why I can get very high render times (essentially no parallel processing), and why messing with the number of CPUs allowed for simultaneous frame rendering, or the amount of RAM said CPUs can access, has little to no effect on total render time.
    Supposedly as some point AE was going to be changed such that it used Media Encoder to do it's rendering (same as PPro does), thus speeding up rendering for any PPro project that has AE parts dynamically linked in.
    Has this been done in CS6? If not, any idea when that's scheduled to happen?

    Jim Simon wrote:
    (I do wish Adobe staff would keep this distinction mind when creating their videos.  When I saw one about the new background rendering in PP, I was interested, only to learn that he was actually talking about background exporting, a feature PP has had since AME was introduced in CS4.)
    The distinction is not so distinct, and this is an industry issue, not really Adobe. After Effects has a render queue, which is used for exporting, but you can also export. Lightwave has this, even Avid. The terms do have their own distinct meanings, but of course context is usually required. So usually "rendering previews" or "rendering final output" serve as context-sensitive uses of the term.
    Terminology abuse is widespread, even people with video cameras now call themselves "filmmakers" and people who produce films never shown nor intended for a cinema call themselves "cinematographers." ENG video producers are called "photogs" and news photographers are called "photojournalists."
    Transcoding, encoding, rendering, exporting....mish-mashed unfortunately, but thankfully most people can figure out what's meant.
    Back to the OP - After Effects can be used with Adobe Media Encoder, it's just not the default. You can import any composition into AME from AE and render your encoded export.
    As for background rendering....I remember when Pinnacle Liquid was the first to the table with that feature back in 2004 or 2005. It seemed awesome, except that you needed a ton of spare hard drive space and lots of processing to keep the background rendering going...effecitvely your processor was in use 100% of the time. When you weren't scrubbing or playing back, Liquid was rendering previews. Of course, you could use those previews during export but you rarely would have wanted to do so, since it was better quality to reference the original data when compositing the layers and effects to output to a web file, for instance. Then  you had to keep cleaning up the preview cache.
    I rarely render previews at all, and when I do it's just a small segment at a time, just to get a full look at the final composite. Mercury Playback is usually more than capable of playing back most of my edits the rest of the time.

  • I got render and RAM preview problems. help?

    i got render and RAM preview problems with after effects! please help me
    when i started on a project earlier today the RAM preview was failing and it stoped making a preview after about a second, when i hit the RAM preview buttom again it continued to load and stoped again after a half second, and it continued to do that till it wasn't loading at all, just playing the same thing up even doe it haden't loaded the whole composition! BUT if i moved the (thing you see where you are on the timeline in need of a better name) it started loading a little more and then it stoped again.. so after alot of problems and moving i managed to make a RAM preview of the whole composition..
    now the real problem: when i was done with my project and i was going to reender i did like this: i added my composition to the render queue, chosed my render settings and started to render, after exactly 37 frames it stoped and no window or anything poped up, the only thing that was telling me something was wrong was the render status, and it said: ''failed at 0;00;00;37'' that's not even a second! and BTW when i render after effects only uses 12% of my 6GB RAM memory.. i dont know what to do! i've tried other render settings but the same thing happens! can anyone help me?
    BTW i'm swedish and only 14 so i might misspelled something..

    Start here and make sure that you understand how RAM preview is supposed to work first:
    http://forums.adobe.com/thread/424030
    What version of After Effects? Have you installed the recent updates? What operating system? What kind(s) of source footage? Has this ever worked before? What other software are you running? Do you have any third-party effects or codecs installed? Are you rendering with OpenGL?
    What are your Memory & Multiprocessing settings? Are you using Render Multiple Frames Simultaneously multiprocessing?

Maybe you are looking for