Render problem PPRO 2014 Low-level importer error MPEG (Importer)

A problem I have encountered in PPRO CC, and now encountered in my project rendering with insane consistence. Ctrl-M, export to Adobe Encoder 2014, starts render, 3-5 minutes of problem-less rendering, then render fails with the above error in logs. Close PPRo 2014, close Encoder, reopen, reinitialize, might last longer - 10 mins., fails again. PC, i7, 16Gb RAM, 40Gbs scratch SSD disk, Quadro 2000, on the timeline a mix of Panasonic AF100 and the Lumix assortement (GH1 hacked, GH3), plus 2 GoPro 3, all AVCHD or H.264 files.
Could that be a system configuration glitch? Because I noticed that sometimes it would persistently halt render at one and the same spot, other times it will glide through it like knife through butter but halt later on a clip/inbetween clips that were of the same type. On the other hand, on the busy comb of selected clips on multiple tracks in a multi-camera gig, it is most definitely halting renders. Once I've done rendering bit by bit and have a lineup on one track with an adjustement layer on top across teh whole length of the assembled cadence of clips with a few effects on it - it finishes rendering no matter however long the workarea is, no errors then. What is up? This is driving me crazy, rendering turned into tip-toeing around this problem with the assembly of long programming out of 3-5min pieces of successful renders. Help!

I'm having the same issue here.
Error: A low level exception occurred in: Importer MPEG (Importer)
Anyone here who can help with this?
Some Specs:
MBP Retina, NVIDIA Gforce GT 750M, 16GB Ram, i7, G-RAID Thunderbolt (external media storage)
Premiere CC 2014
I'm working in a 1080p25 Timeline with Canon C300 footage (.MXF), normally it runs properly.

Similar Messages

A low level exception occured in: Importer MPEG (Importer)

Okay, first some system specs:
Macbook Pro
2.2 GHz Intel Core i7
8 GB RAM
Radeon HD 6750
OSX Lion 10.7.5
Premiere Pro CS6 (updated to lastest available version)
--I remember installing updates a few days ago (maybe last week), but don't remember if any of them were for Premiere and could possibly be the problem.
The trouble I'm having is with one .MTS clip. I have a timeline about 20 minutes in length. I edited the whole thing and had no problems the whole time, with any clip. All clips originally imported correctly, played back fine, etc.
I exported a copy for client review (from Media Encoder CS6) the other day. One clip (the .MTS clip in question) showed as "Media Offline". It is not offline, I did not move the clip, etc. I unlinked the clip in the project, relinked it, and it did show up in the project and was able to be played back.
Exported another copy, found the same error occured with just this one clip. Now I'm noticing that when I open the project, I receive the error in the topic title (A low level exception occured in: Importer MPEG (Importer). The clip will not play back and shows up as "Media Pending", as if it's not coming in correctly. Unlinking and relinking doesn't fix the issue.
I have many other .MTS clips in my timeline. All of them work correctly, play back correctly, and export correctly. There doesn't seem to be any inherent problem with the clip itself; it plays back smoothly in VLC, and I've transcoded it to a .mov to try and just bring that in and get around this stupid issue. This didn't work either; I unlink the clip, then relink to the transcoded .mov -- it actually will play back in the preview monitor, but will not display when trying to view it on my timeline. I have also created a copy of the project, tried this inside of the copy, as well as created a new sequence and pasted over the information; none of that worked either. There are also other sequences this clip is on, and it will not play back in any of them either, but as I mentioned, plays back in the preview.
I did find one other topic with a similar issue; they recommend deactivating Premiere, restarting the computer, and activating it again. I did do a restart initially to try and diagnose the problem, but to no avail. I tried deactivating the program, but the Adobe Application Manager doesn't load; it has almost never loaded for me whenever I try to use it, which is frustrating in and of itself.
I tried creating an entirely new project and importing the other project. When I did this Premiere just froze; I'm assuming it can't handle all the pieces (it's a fairly complex project with hundreds of clips) and they are also coming off an external drive through a USB 3.0 cable.
I've temporarily "fixed" this by bringing in the transcoded clip, resyncing it to to the spot I need it in, and cutting it as necessary. I typed this post as I went and tried various things, and while I've found my way around the problem, it doesn't really solve it. I opened another old project that was very similar to this one and also encountered the same error message. I didn't stick around to find out if there was just one clip causing the issue; the fact that it was there was enough for me.
So, what do I need to be doing here? I'm guessing the stock answer is to uninstall Premiere and reinstall it, which I don't want to do unless I have to since it's a pain in the ***. I'm kind of through the problem for this project, but want to be able to deal with it for the future. Hoping someone with knowledge can chime in and tell me whether it's the update from the other day causing this.
If the answer is to uninstall and reinstall Premiere, do I need to run some cleaner tool? I vaguely remember hearing about that before in regards to uninstalling and reinstalling.

I'm having the same issue here.
Error: A low level exception occurred in: Importer MPEG (Importer)
Anyone here who can help with this?
Some Specs:
MBP Retina, NVIDIA Gforce GT 750M, 16GB Ram, i7, G-RAID Thunderbolt (external media storage)
Premiere CC 2014
I'm working in a 1080p25 Timeline with Canon C300 footage (.MXF), normally it runs properly.

Low level exception errors

I have added Speedgrade filters to timelines and continually get these "Low-level exception" errors in Media Encoder when I try to render the timelines. The first timeline in the list renders without error. Subsequent timelines all fail because of the error. Any ideas?

Hi DilipG,
Thanks for the suggestion, I've checked it couple of times, and could see them imported...o/p as below
<?xml version='1.0' encoding='UTF-8'?>
<page xmlns:jrad="http://xmlns.oracle.com/jrad"
xmlns:oa="http://xmlns.oracle.com/oa" xmlns:ui="http://xmlns.oracle.com/uix/ui"
version="10.1.3_678" xml:lang="en-US"
xmlns:user="http://xmlns.oracle.com/jrad/user"
xmlns="http://xmlns.oracle.com/jrad"
file-version="$Header:
ipm/src/imaging-axf-integration-ebs/oaf/RedirectToAxfPG.xml /11.1.1.7.0/329
2013/01/18 18:26:59 joxford Exp $">
<content>
<oa:pageLayout id="PageLayoutRN"
amDefName="oracle.apps.fnd.framework.server.OAApplicationModule"
windowTitle="Redirect to AXF" title="Redirect to AXF"
controllerClass="oracle.apps.ak.ucm.axf.webui.RedirectToAxfCO">
<ui:corporateBranding>
            <oa:image id="corporateBrandingImage"
source="/OA_MEDIA/FNDSSCORP.gif"/>
         </ui:corporateBranding>
</oa:pageLayout>
   </content>
</page>
<?xml version='1.0' encoding='UTF-8'?>
<oa:stackLayout version="10.1.3_1086" xml:lang="en-US"
xmlns:oa="http://xmlns.oracle.com/oa" xmlns:jrad="http://xmlns.oracle.com/jrad"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:user="http://xmlns.oracle.com/jrad/user"
xmlns="http://xmlns.oracle.com/jrad" file-version="$Header:
ipm/src/imaging-axf-integration-ebs/oaf/ManagedAttachmentButtonRN.xml
/11.1.1.7.0/329 2013/01/18 18:26:59 joxford Exp $"
amDefName="oracle.apps.fnd.framework.toolbox.tutorial.server.SearchAM"
standalone="true"
controllerClass="oracle.apps.ak.ucm.axf.webui.GenericUcmButtonCO">
<ui:contents>
      <oa:button id="MAButton" prompt="Managed Attachments"/>
</ui:contents>
</oa:stackLayout>
PL/SQL procedure successfully completed.
Thanks
Rajiv.

A low-level exception occurred in Importer FastMPEG

I am having serious problems with a wedding project. When I started it a few weeks ago it was all going ok when all of a sudden some of the files came up pixelated and blocky. I know the next question will be "can you post a clip here?". I will try to but it means showing the Bride and Groom's faces and as I have not yet shown them any of the video files I do not think it appropriate to do so here. In the meantime I am posting this here as I need some urgent help, as the project is getting very close to being overdue now.
Technical stuff:
Files from Sony HXR-MC2000E - SD MPEG files;
Using Adobe Premiere CS6
Custom built Intel i3 3.30ghz pc
Windows 7 with Service pack installed
When i opened the project today I got an error message: "a low-level exception occurred in Importer FastMPEG". Can anyone clue me up as to what this means please. To me, it seems like it could be related as I am importing MPEGs. I have tried re-importing the original files but they still come up as pixelated.
Thanks again in advance for your help.

As well as the answering the general questions here http://forums.adobe.com/message/4200840 please provide DETAILS of your computer hardware
Especially the amount of RAM and number and distribution of hard drives and your brand/model graphics adapter and driver version
For instance... my computer
Asus P6 SE motherboard with Intel i7 930 CPU
12Gig Ram and nVidia GTX 285 to use Cusa/MPE
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files (1)
(1) for faster input/output with 4 drives
- use drive 3 for all source files
- use drive 4 for all output files
(2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
I can't help with your error (have never had that) but posting hardware details MAY help lead to a solution
Also, if you are editing HiDef footage, your i3 is VERY underpowered... you need an i7 for "smooth" HD editing... plus, of course, enough hard drives to spread the workload (minimum 2 - or 3 like I have)

A low-level exception occured in: Importer RED (Importer)

Help please!!! I am working on a Film project and I can no longer see my RED footage. The software updated to 6.0.5 and all of a sudden all my RED files say MEDIA PENDING. Then in the bottom right hand corner there is a red dot with a white X on it. When I click on it, the error log pops up and says A low-level exception occured in: Importer RED (Importer) and says it quite a few times. What to do????

As well as the answering the general questions here http://forums.adobe.com/message/4200840 please provide DETAILS of your computer hardware
Especially the amount of RAM and number and distribution of hard drives and your brand/model graphics adapter and driver version
For instance... my computer
Asus P6 SE motherboard with Intel i7 930 CPU
12Gig Ram and nVidia GTX 285 to use Cusa/MPE
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files (1)
(1) for faster input/output with 4 drives
- use drive 3 for all source files
- use drive 4 for all output files
(2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
I can't help with your error (have never had that) but posting hardware details MAY help lead to a solution
Also, if you are editing HiDef footage, your i3 is VERY underpowered... you need an i7 for "smooth" HD editing... plus, of course, enough hard drives to spread the workload (minimum 2 - or 3 like I have)

Order Import Erroring while importing closed Order

Hello,
I am working on importing closed order for historical purpose and order import is erroring without giving much details. I set the debug level to 5 and log file contains only one error' ORDER IMPORT FAIL DUE TO UNEXPECTED ERROR.
I am attaching the insert statements for headers and lines. Please review and hope to get a solution from one of the OM gurus here.
Thanks a bunch in advance.
Anant
INSERT INTO OE_HEADERS_IFACE_ALL
(ORIG_SYS_DOCUMENT_REF
,ORDER_SOURCE_ID
,ORG_ID
,ORDER_NUMBER
,ORDERED_DATE
,ORDER_TYPE_ID
,PRICE_LIST_ID
,SOLD_FROM_ORG_ID
,SOLD_TO_ORG_ID
,CUSTOMER_NUMBER
,TAX_EXEMPT_FLAG
,TRANSACTIONAL_CURR_CODE
,INVOICING_RULE_ID
,ACCOUNTING_RULE_ID
,PAYMENT_TERM_ID
,CREATION_DATE
,CREATED_BY
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,SALESREP_ID
,OPERATION_CODE
,CLOSED_FLAG --BOOKED_FLAG
,DROP_SHIP_FLAG
,SHIP_TO_ORG_ID
,INVOICE_TO_ORG_ID
,SHIP_FROM_ORG_ID
,ORIG_SYS_CUSTOMER_REF
,ORIG_SHIP_ADDRESS_REF
,ORDER_CATEGORY
,BOOKED_FLAG)
VALUES
('514'     -- ORIG_SYS_DOCUMENT_REF
,1001                    -- ORDER SOURCE ID
,'102'                    -- ORG ID
,10001006               -- ORDER NUMBER
,SYSDATE               -- ORDERED_DATE
,1021                    -- ORDER TYPE ID
,6024                    -- PRICE LIST ID
,102                    -- SOLD FROM ORG ID
,2632                    -- SOLD TO ORG ID
,'UN1666'               -- CUSTOMER NUMBER
,'S'                    -- TAX_EXEMPT_FLAG
,'USD'                    -- TRANS CURRENCY_CODE
,-2                         -- INVOICING_RULE_ID
,1                         -- ACCOUNTING_RULE_ID
,5                         -- TERMS_ID
,SYSDATE               -- CREATION_DATE
,1150                    -- CREATED_BY
,1150                    -- LAST_UPDATED_BY
,SYSDATE               -- LAST_UPDATE_DATE
,-3                         -- SALESREP_ID
,'INSERT'               -- OPERATION CODE
,'Y'                    -- CLOSED FLAG
,'N'                    -- DROP SHIP FLAG
,NULL                     -- SHIP_TO_ORG_ID (SITE USE ID FROM RA_SITE_USES_ALL, SITE_USE_CODE = SHIP_TO)
,1712                     -- INVOICE_TO_ORG_ID (SITE USE ID FROM RA_SITE_USES_ALL, SITE_USE_CODE = BILL_TO)
,103                    -- SHIP FROM ORG ID
,NULL                    -- ORIG_SYS_CUSTOMER_REF
,NULL                    -- ORIG_SHIP_ADDRESS_REF
,'Order'               -- ORDER CATEGORY
,'N')                    -- BOOKED_FLAG
COMMIT
INSERT INTO OE_LINES_IFACE_ALL
(ORDER_SOURCE_ID
,ORIG_SYS_DOCUMENT_REF
,ORIG_SYS_LINE_REF
,ORIG_SYS_SHIPMENT_REF
,INVENTORY_ITEM
,REQUEST_DATE
,ORDERED_QUANTITY
,ORDER_QUANTITY_UOM
,PRICE_LIST_ID
,UNIT_SELLING_PRICE --UNIT_LIST_PRICE
,ACCOUNTING_RULE_ID
,PAYMENT_TERM_ID
,SALESREP_ID
,CREATION_DATE
,CREATED_BY
,LAST_UPDATE_DATE
,LAST_UPDATED_BY
,OPERATION_CODE
,DROP_SHIP_FLAG
,SHIP_TO_ADDRESS1
,SHIP_TO_ADDRESS2
,SHIP_TO_CITY
,SHIP_TO_POSTAL_CODE
,SHIP_TO_sTATE
,SHIP_TO_COUNTRY
,CLOSED_FLAG
,ITEM_TYPE_CODE
,INVENTORY_ITEM_ID
,DELIVERY_LEAD_TIME
,DELIVERY_ID
,TAX_EXEMPT_FLAG)
VALUES
(1001                    -- ORDER SOURCE ID
,'514'          -- ORIG SYS DOC REF
,'L4'               -- ORIG SYS LINE REF
,NULL               -- ORIG SYS SHIP REF
,'KR4R362478-07'     -- ITEM NUMBER
,SYSDATE               -- REQUEST DATE
,40                    -- ORDER QTY
,'EA'                    -- ORDER QTY UOM
,6024                    -- PRICE LIST ID
,95                -- UNIT LIST PRICE
,1                    -- ACCOUNTING RULE ID
,5                    -- PAY TERM ID
,-3                    -- SALESREP ID
,SYSDATE               -- CREATION DATE
,1150                    -- CREATED BY
,SYSDATE               -- LAST UPDATE DATE
,1150                    -- LAST UPDATED BY
,'INSERT'               -- OPERATION_CODE
,'N'                    -- DROP SHIP FLAG
,NULL --'1003 WASHINGTON AVE'     -- SHIP ADD1
,NULL --'SUITE 340'          -- SHIP ADD2
,NULL -- 'CHICAGO'          -- CITY
,NULL -- 60610               -- POSTAL
,NULL -- 'IL'               -- STATE
,NULL -- 'US')               -- COUNTRY
,'Y'
,'FG'
,7488
,1
,1
,'Y')
commit
---------------------------------------

Ganapati,
Did you try passing the customer_number like -1 or some random high number that does not exist in hz_cust_accounts table in the account_number for party_type='PERSON' in the table oe_customer_info_iface_all?
As I see this check for the first_name||last_name is done only of the customer number is not passed and customer_number is not used any where in the customer creation (if you are using automatic numbering for the customer accounts then you will obviously not passing any value to new_account_number which is used to created).
Give it a try while I keep myself busy with my airport woes here.
Thanks
Nagamohan

Adobe Premiere Pro CC 2014.2 Trial Version - Error when importing mts and mp4 video files

First time using Adobe Premiere Pro (and I'm using the trial version). When I try to import an mts video file (and tried to import an mp4 file as well), I get the error: Adobe Premiere Pro CC 2014.2 has stopped working. And then the program crashes. Please help.
My computer specs: Windows 7 with Service Pack 1,Processor: Intel(R) Core(TM) i5-4570 CPU @ 3.2GHz, RAM: 4.00 GB, System type: 64-bit

Hi Catherine,
Welcome to the Adobe forums.
Please try the steps mentioned below and check if it works for you.
1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
Launch Premiere Pro and import the clip to check.
Regards,
Vinay

T400 power/battery problem (0190 critical low-battery error)

Hi everyone, I hope you guys can help me with this.
I was using my T400 and when the battery got low, I had to charge it, obviously. The T400 has these little LCD displays at the bottom of the screen, one of them is the battery (it was orange since the battery was low) and right next to it there is the display that lets you know the power cord is plugged in.
When I plugged the power cord in, I noticed the display did not work. So I was left with a non-charging power cord and a fast lowering battery power. What was to happen happened, so now my battery is completely depleted.
When I unplug the battery and try to power the laptop, there is no power at all, nothing.
When I put the battery in and try to power the laptop, I get the message 0190: Critical low-battery error.
Thanks guys !

batterybuz wrote:
I think your adapter is wrong,not the battery.
You must replace it with a ac adapter like 120w universal ac adapter
what the hell? hell no! use proper lenovo power adaptors.
Moderator edit: batterybuz is a SPAMmer, and is banned. Removed SPAM content from quoted post. Thanks cassio !
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Low Level Read Error on SSL

I am trying to convert form 4.52 to 5.1 and get the following error. This
worked in 4.52. The environment is Intel/NT.
Thanks,
Mica Cooper
java.lang.Throwable: Aborting Session
at weblogic.security.SSL.SSLSocket.abort(SSLSocket.java:812)
at
weblogic.security.SSL.RecordInputStream.getData(RecordInputStream.java:151)
at
weblogic.security.SSL.RecordInputStream.read(RecordInputStream.java,
Compiled Code)
at java.io.BufferedInputStream.read1(BufferedInputStream.java,
Compiled Code)
at
java.io.BufferedInputStream.read(BufferedInputStream.java,Compiled Code)
at java.io.FilterInputStream.read(FilterInputStream.java, Compiled
Code)
at java.io.InputStreamReader.fill(InputStreamReader.java:163)
at java.io.InputStreamReader.read(InputStreamReader.java:239)
at java.io.BufferedReader.fill(BufferedReader.java:137)
at java.io.BufferedReader.read(BufferedReader.java, Compiled Code)

Apparently either the content type in the SSL message stream is not compatible between 45 and 51 or the hand shake could otherwise not be handled. Contact support and ask them about migrating 45 SSL clients to 51.
Mica Cooper wrote:
Hmmm,
must be another Weblogic 'mystery' I'll add it to my list at #347!!!! of
Weblogic mystery bugs I have to code around.
Mica
"Mica Cooper" <[email protected]> wrote in message
news:3a2c2ff0$[email protected]..
I am trying to convert form 4.52 to 5.1 and get the following error. This
worked in 4.52. The environment is Intel/NT.
Thanks,
Mica Cooper
java.lang.Throwable: Aborting Session
at weblogic.security.SSL.SSLSocket.abort(SSLSocket.java:812)
at
weblogic.security.SSL.RecordInputStream.getData(RecordInputStream.java:151)
at
weblogic.security.SSL.RecordInputStream.read(RecordInputStream.java,
Compiled Code)
at java.io.BufferedInputStream.read1(BufferedInputStream.java,
Compiled Code)
at
java.io.BufferedInputStream.read(BufferedInputStream.java,Compiled Code)
at java.io.FilterInputStream.read(FilterInputStream.java, Compiled
Code)
at java.io.InputStreamReader.fill(InputStreamReader.java:163)
at java.io.InputStreamReader.read(InputStreamReader.java:239)
at java.io.BufferedReader.fill(BufferedReader.java:137)
at java.io.BufferedReader.read(BufferedReader.java, Compiled Code)

FDM Import Error in import file Details: Permission denied

Hi,
i am trying to run the FDM Import but it gives an error with the error number 70 'Permission denied'.
Earlier it was working fine, now it is acting crazy,
please assist guys....
find the log file below:
** Begin FDM Runtime Error Log Entry [2011-03-21 09:56:07] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsArchiveMgr.fArchiveSupercededDelete
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15284
IDENTIFICATION:
User............................................. admin
Computer Name.................................... GITSHYPT01
App Name......................................... AWRFinCo
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 09:56:07] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsArchiveMgr.fArchiveSupercededFlag
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15284
IDENTIFICATION:
User............................................. admin
Computer Name.................................... GITSHYPT01
App Name......................................... AWRFinCo
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 09:56:07] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsImpProcessMgr.fClearData
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15284
IDENTIFICATION:
User............................................. admin
Computer Name.................................... GITSHYPT01
App Name......................................... AWRFinCo
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 09:56:07] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15284
IDENTIFICATION:
User............................................. admin
Computer Name.................................... GITSHYPT01
App Name......................................... AWRFinCo
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

The FDM Service account does not have proper permission to the FDM application folder. Make sure that the applicaiton path is specified in UNC format and that the FDM Service account has full read\write to the application share. So the app path should be something like \\servername\fdmdata\<appname> and the FDM service account shoudl have full control to the FDMDATA folder.

Import error when importing .psd file created in Photoshop CS3

I have a file that was created in Photoshop CS3. I am trying to import this file into Catalyst CS5, but I keep getting an input error. I created a file in Photoshop CS5 and I was able to import this .psd file successfully into catalyst. So I guess my question is this; Does Catalyst support .psd files created in Photoshop CS5 only? If this is the case, how can I convert the CS3 .psd to a CS5 .psd

I am now building my files using photoshop CS5. A few challenges I have experienced while trying to import into Catalyst:
- If I do a straight import into Catalyst, I loose all my colors in Catalyst. That is, catalyst imports all my vectors without any of the colors I had in Photoshop. My understanding is that Catalyst has libraries to support Photoshop files, so your import from Photoshop should not look any different in Catalyst.
Work Around: I have had to rasterize / merged all my image layers for the different components I have built in Photoshop CS5. Then when I start the import process I click the Advanced button on the catalyst import dialog. From the advanced dialog, I have to flatten (to bitmap) all the images I intend to import.
This process takes about two hours because I have a lot of components on the page.
Is there something I'm not doing right here? I'm not seeing the value add to Catalyst, if it's taking me this long to just import .psd files

Sub Agreement XML import error: XML import could not process field: CONTRACT_UNIQUE_DOC_NAME

Hi All,
I am importing Sub Agreement in XML format and getting below error.
XML import could not process field: CONTRACT_UNIQUE_DOC_NAME
unsupported null bind parameter no. 0
Below is the XML.
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Contracts.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
    <object classname="contracts.Agreement">
<fields>
                                <CONTRACT_UNIQUE_DOC_NAME>P-XXXX-00001</CONTRACT_UNIQUE_DOC_NAME>
                                <DISPLAY_NAME>Testing Agreement Name 1 </DISPLAY_NAME>
                                <CALC_METHOD>UNIT_PRICE_ENTERED</CALC_METHOD>
                                <UNIQUE_DOC_NAME>S0002510</UNIQUE_DOC_NAME>
                                <STATUS>In Process</STATUS>
                                <COMPANY>TEST</COMPANY>
                                <LOCATION>Location_114</LOCATION>
                  </fields>
    </object>
</objects>
</sapesourcing>
If anyone is successful in importing Sub Agreement in XML format? also please validate the above xml structure?
Note: I am able to load Sub Agreement using CSV. But in our scenario data comes in XML format.
Thanks & Regards
Sai

Hi Gary,
I am able to load below objects in XML format without any issues. And I am using Scheduled Task of type “Data Import Monitor” to load them.
1) Project (1100)
2) Master Agreement (1004)
3) Extension Collections for Project
4) Extension Collections for Master Agreement
1) Working XML Structure for Project(1100) .
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Projects.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
    <object classname="projects.projects">
      <fields>
<UNIQUE_DOC_NAME>S0004392</UNIQUE_DOC_NAME>
<DISPLAY_NAME>Test Project</DISPLAY_NAME>
2) Working XML Structure for Master Agreement (1004) object.
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Contracts.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
<object classname="contracts.Contract">
<fields>
<UNIQUE_DOC_NAME> 00215944</UNIQUE_DOC_NAME>
<DISPLAY_NAME>TEST MA</DISPLAY_NAME>
<DOCUMENT_DESCRIPTION>Contract Desc</DOCUMENT_DESCRIPTION>
3) Working XML Structure for Extension Collections for Project(1100).
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Projects.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
<object classname="projects.projects">
<fields>
<UNIQUE_DOC_NAME> S0004392</UNIQUE_DOC_NAME>
</fields>
<collections>
<Z_DETAILS replace="true">
<object classname="extension_collections">
<fields>
<NAME>Sai</NAME>
<EMAIL>[email protected]</EMAIL>
</fields>
</object>
<object classname="extension_collections">
<fields>
<NAME>Krishna</NAME>
<EMAIL>[email protected]</EMAIL>
</fields>
</object>
</ Z_DETAILS >
</collections>
</object>
</objects>
</sapesourcing>
4) Working XML Structure for Extension Collections for Master Agreement (1004).
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Contracts.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
<object classname="contracts.Contract">
<fields>
<UNIQUE_DOC_NAME>00215944</UNIQUE_DOC_NAME>
</fields>
<collections>
<ZLINKS replace="true">
<object classname="extension_collections">
<fields>
<LINK_NAME>SAP</ LINK_NAME>
< LINK_URL> http://www.sap.com/index.html </ LINK_URL >
</fields>
</object>
<object classname="extension_collections">
<fields>
<LINK_NAME>SCN Sourcing</ LINK_NAME>
< LINK_URL>http://scn.sap.com/community/sourcing</ LINK_URL >
</fields>
</object>
</ ZLINKS >
</collections>
</object>
</objects>
</sapesourcing>
Could you please help me with the right XML Structure for Agreement( 1003)?
Regards,
Sai

Davinci Resolve 8.1.1 to Premiere CS5.5.2 import error

Importing an XML from Resolve to Premiere gives me a "File import error" "The importer reported a generic error."
The XML from Resolve opens correctly in FCP7, and exporting that Resolve XML from FCP as an XML version 5 from FCP7 is correctly opened in Premiere. Can anyone else verify they are getting the same result?
thanks,

When I removed the offline clips in Premiere and re exported the XML file to Resolve, the resulting XML file from Resolve imported directly into Premiere, No import error, which is why I think having no offline media it might be a work around.
Both the XML file from Resolve and FCP to Premiere has not caused any crashes on my end.
I'm using FCP XML-Round-Trip from Resolve when rendering and using "render clip with unique filename" As long as I render, then export the XML the conform works in Premiere, however the clip names in resolve reflect the original edit of the XML file from Premiere, and only in the file path is the corresponding Resolve renders. I can not find a way to auto reconnect the resolve renders to the exported XML if moved to another suite with out manually doing every shot. Any thoughts?
On a positive note, doing the above steps for removing offline media first in Premiere (I have not tested your suggestion yet of deleting offline files in Resolve) has solved my handle slip problems.
I'd suggest closing both Premiere and Resolve, reopen, and send a sequence from Premiere to Resolve with no offline clips when conformed in Resolve, render and export XML and open directly in Premiere. It's working for me now as long as Resolve exports a XML file without any offline clips, no more import errors or crashes.

Error during import (-40)

I have a G5 Dual 2G with 2G of ram running Imovie 3.0.3. I am trying to import a 42.9M mp4 file and a 189.9M .mov file and am getting this error message after about 6 minutes of trying to import: "Error during import (-40)".
Can anyone tell me what the problem might be? I have serched the forum and came up with the "Use Streamclip 1.8" thats why I could make the 189.9M .mov file into the 42.9M mp4 file.
I was sucsesful in importing 38.5M .mov files into itunes but I seem to have a limit. Does this make sense to anyone?
Thanks for the help.

Aquilafisher,
You can open the 189.9 mov file in MpegStream clip and export to DV format for iMovie (DV is iMovie's native format).
When you choose export to DV format you'll be presented with the "DV Exporter Window" with several options. One option is to "Split DV into Segements" Choose it (This option automatically splits the clip into 2gb or less segments).
You can export the segments directly into your iMovie project's media folder. Next time you open the iMovie project you'll be offered the option to have those segments moved to the clips pane (you can also import the segments but that takes longer).
I was sucsesful in importing 38.5M .mov files into itunes but I seem to have a limit.
Is this the same file 49mb mp4 file that you could only partially import or is this a different file that you were successful importing?????
Is there any particular reason you exported to mp4 first, exactly what are you trying to accomplish?

A low-level exception occurred in: ImporterMPEG (Importer) on Windows Adobe Premere CC 2014

A low-level exception occurred in: ImporterMPEG (Importer) on Windows Adobe Premere CC 2014 Happens a lot. How do I fix this? Thanks

Hi Joseph,
Try signing out of Creative Cloud. Restart Premiere Pro. Sign back in.
Thanks,
Kevin

Render problem PPRO 2014 Low-level importer error MPEG (Importer)

Similar Messages

Maybe you are looking for