Render question - problem
Hi, I am having some kind of problem when rendering. Basically sometimes the look I apply simply doesn't render. I can try again and again and nothing. Then I try and it works. What am I doing wrong? It's totally, seemingly, hit or miss whether it works or not.
I have watched the rendering demo's and read various rendering threads in here. I am seemingly doing everything as I should do.
My setup is an HP workstation with NVIDIA 2000. I can't fathom what I am doing worng. I obviously set my in andout points, everything looks good.. I go to render output, rename file, choose destination etc.. hit render, nothing. Try again, nothing.. and again.. nothing. Close it down, nothing. try again and something. As I say, totally hit or miss if it renders the look or not. PLEASE HELP, clients viewing material tomorrow, really want to get this finished.
Regards in advance!
Hi, I actually found a previous reply of yours on the forum and yes that was the problem. I know the software is in early days but maybe it's something it can be looked into because it clearly confuses people but thanks again, it fixed the problem perfectly and my clients were happy seeing all the looks etc. Appreciated.
Similar Messages
-
Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can speak or response me in thai language
1. ผม อาคเนย์ พำนักอยู่ประเทศไทย กรุงเทพฯ มีปัญหาสอบถาม ดังต่อไปนี้
- กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
- ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
ขอบคุณครับ
อาคเนย์ อุดปิน
กด
<Edited By Host>Google translation:
พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
http://www.apple.com/emea/support/itunes/contact.html -
Question / problems with the Toshiba TV 40TL938 (40TL938F)
Hi everybody,
I bought the Toshiba TV 40TL938 french version ( 40TL938F ), in an online store.
I have a few question / problem, and i hope you could help me.
- when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
- when i play MKV vido files via DLNA (with XBMC), there is no subtitles anymore. Whose fault is it ? my TV ? XBMC ? do you how i can fix this ?
- does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938
Thank you very much by advance for your help !
Backslash
French user of a beautiful Full HD 3D 40 inches toshiba LED TV :)> {quote:title=TomDexter wrote:}{quote}
> > when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
>
> User manual page 76:
> http://www.toshiba-om.net/LCD/PDF/English/TL938-4046-English.pdf
> You will need to check the option: +Subtitle Type+
Hi !
Thank you for your answer,
I saw this but there is no way to change the subtitle setting.
In "subtitle type" the only thing i can do is to swich from "normal" to "deaf and hearing impaired" ("sourd et malentendant" in french).
So i guess i will have to get used to it
Anyway, thank you for your help !
> {quote:title=donhe7 wrote:}{quote}
> BACKSLASH ASKS " does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938?"
>
> Please excuse my ignorance, but what is "DTS"???
>
> donhe7
DTS is an audio format, such as AC3 or mp4. This TV doesn't support DTS, so when i play movie (such as MKV file) with audio in DTS, there is no sound (but the video is ok). -
Hi,
My model looks fine on my own computer, but when viewed on my friend's machine it is transparent. These screen captures show the problem:
http://www.normal-design.com/acrobat-render-prob.html
The file was saved to "solid outline". These shots show the model in "illustration" mode. You will note that you can see the back faces in the problem rendering. No matter what mode the rendering is switched to it shows this unwanted x-ray effect on my friend's machine. On mine everything appears correct.
The file in question is online here at:
http://www.normal-design.com/angled-assembly02.pdf
Anyone have any insight as to where this problem might be coming from?
Thanks,
DavidOK! I figured it out:
Edit>preferences>3D>enable double sided rendering -
Noob Question: Problem with Persistence in First Entity Bean
Hey folks,
I have started with EJB3 just recently. After reading several books on the topic I finally started programming myself. I wanted to develop a little application for getting a feeling of the technology. So what I did is to create a AppClient, which calls a Stateless Session Bean. This Stateless Bean then adds an Entity to the Database. For doing this I use Netbeans 6.5 and the integrated glassfish. The problem I am facing is, that the mapping somehow doesnt work, but I have no clue why it doesn't work. I just get an EJBException.
I would be very thankfull if you guys could help me out of this. And don't forget this is my first ejb project - i might need a very detailed answer ... I know - noobs can be a real ....
So here is the code of the application. I have a few methods to do some extra work there, you can ignore them, there are of no use at the moment. All that is really implemented is testConnection() and testAddCompany(). The testconnection() Methode works pretty fine, but when it comes to the testAddCompany I get into problems.
Edit:As I found out just now, there is the possibility of Netbeans to add a Facade pattern to an Entity bean. If I use this, everythings fine and it works out to be perfect, however I am still curious, why the approach without the given classes by netbeans it doesn't work.
public class Main {
private EntryRemote entryPoint = null;
public static void main(String[] args) throws NamingException {
Main main = new Main();
main.runApplication();
private void runApplication()throws NamingException{
this.getContext();
this.testConnection();
this.testAddCompany();
this.testAddShipmentAddress(1);
this.testAddBillingAddress(1);
this.testAddEmployee(1);
this.addBankAccount(1);
private void getContext() throws NamingException{
InitialContext ctx = new InitialContext();
this.entryPoint = (EntryRemote) ctx.lookup("Entry#ejb.EntryRemote");
private void testConnection()
System.err.println("Can Bean Entry be reached: " + entryPoint.isAlive());
private void testAddCompany(){
Company company = new Company();
company.setName("JavaFreaks");
entryPoint.addCompany(company);
System.err.println("JavaFreaks has been placed in the db");
}Here is the Stateless Session Bean. I added the PersistenceContext, and its also mapped in the persistence.xml file, however here the trouble starts.
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
@Stateless(mappedName="Entry")
public class EntryBean implements EntryRemote {
@PersistenceContext(unitName="PersistenceUnit") private EntityManager manager;
public boolean isAlive() {
return true;
public boolean addCompany(Company company) {
manager.persist(company);
return true;
public boolean addShipmentAddress(long companyId) {
return false;
public boolean addBillingAddress(long companyId) {
return false;
public boolean addEmployee(long companyId) {
return false;
public boolean addBankAccount(long companyId) {
return false;
}That you guys and gals will have a complete overview of whats really going on, here is the Entity as well.
package ejb;
import java.io.Serializable;
import javax.persistence.*;
@Entity
@Table(name="COMPANY")
public class Company implements Serializable {
private static final long serialVersionUID = 1L;
@Id
@GeneratedValue(strategy = GenerationType.AUTO)
private Long id;
@Column(name="COMPANY_NAME")
private String name;
public Long getId() {
return id;
public void setId(Long id) {
this.id = id;
public String getName() {
return name;
public void setName(String name) {
this.name = name;
System.err.println("SUCCESS: CompanyName SET");
@Override
public int hashCode() {
int hash = 0;
hash += (id != null ? id.hashCode() : 0);
return hash;
@Override
public boolean equals(Object object) {
// TODO: Warning - this method won't work in the case the id fields are not set
if (!(object instanceof Company)) {
return false;
Company other = (Company) object;
if ((this.id == null && other.id != null) || (this.id != null && !this.id.equals(other.id))) {
return false;
return true;
@Override
public String toString() {
return "ejb.Company[id=" + id + "]";
}And the persistence.xml file
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="PersistenceUnit" transaction-type="JTA">
<provider>oracle.toplink.essentials.PersistenceProvider</provider>
<jta-data-source>jdbc/sample</jta-data-source>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties>
<property name="toplink.ddl-generation" value="create-tables"/>
</properties>
</persistence-unit>
</persistence>And this is the error message
08.06.2009 10:30:46 com.sun.enterprise.appclient.MainWithModuleSupport <init>
WARNUNG: ACC003: Ausnahmefehler bei Anwendung.
javax.ejb.EJBException: nested exception is: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.RemoteException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.; nested exception is:
javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.RemoteException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.; nested exception is:
javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:243)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:205)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:152)
at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:225)
at ejb.__EntryRemote_Remote_DynamicStub.addCompany(ejb/__EntryRemote_Remote_DynamicStub.java)I spend half the night figuring out whats wrong, however I couldnt find any solution.
If you have any idea pls let me know
Best regards and happy coding
Taggert
Edited by: Taggert_77 on Jun 8, 2009 2:27 PMWell I don't understand this. If Netbeans created a Stateless Session Bean as a facade then it works -and it is implemented as a CMP, not as a BMP as you suggested.
I defenitely will try you suggestion, just for curiosity and to learn the technology, however I dont have see why BMP will work and CMP won't.
I also don't see why a stateless bean can not be a CMP. As far as I read it should not matter. Also on the link you sent me, I can't see anything related to that.
Maybe you can help me answering these questions.
I hope the above lines don't sound harsh. I really appreciate your input.
Best regards
Taggert -
Question/Problem Sharing iTunes Library between multiple users
Hello all,
I have a question (potential problem) regarding sharing an iTunes Library between multiple users.
In the past, I had placed the iTunes folder in /Users/Shared, and created an alias to it in the "Music" folder of each user, and it worked fine. However, with a recent upgrade to Mac OS 10.5, only the Home user account can access the library.
I read the Apple Support Document http://support.apple.com/kb/ht1203 uner Mac OS X which specifically states *not* to move the iTunes folder, just the iTunes Media folder (which I don't have, would that be iTunes Music?).
Any recommendations? Should I delete the different alias, move the iTunes folder back to the home user, and then follow the instructions in the support document?
We're also looking to sync music purchsed on our iPod touches, as well as apps (which weren't supported in our privous Mac OS X version.
Any advice is appreiciated.David Guay wrote:
... iTunes Media folder (which I don't have, would that be iTunes Music?).
yes.
specifically states *not* to move the iTunes folder
*do* keep the entire iTunes folder in /users/shared, however, instead of creating aliases, launch iTunes while holding the option (⌥) key, click choose library when prompted, and select the iTunes folder in /users/shared.
obviously, only one iTunes at a time can access the library ! -
Multiple Machine Render question
Alright, so I just realized that After Effects (I'm running CS3) can utilize multiple machine renderings. At first, I thought this would be great since my typical renders are anywhere from 45 minutes to 2 hours. But, after much playing around, I realized that it only works for sequences.. which isn't much help because I export the majority of my work as DV Streams or MOV files! Is there any way I can get it to do formats other than image sequences or am I SOL?
I also considered buying a few moderate-end machines and putting together a small render farm in case I couldn't, but I wouldn't know where the best place is to start with something like that (I'd imagine determine what software works, but I can't find much info on that, really).for PC's only =====
i wrote my own dos scripts to setup network rendering (remotely start after effects engines, copy projects to a watchfolder, and setup RenderControlFiles, copy and install fonts, etc ... took me a while to write and set up and is really the property of the company I work for), but the basics are below and from my in-house help file. Works better for us than collecting footage, basically, just substitute local drive volume names with UNC names, save the project, submit to the watchfolder, in its own directory, and add an RCF text file (try collecting footage, an RCF file will be generated so you can see whats in it). The thing that took me longest to debug was to install required fonts remotely ... any way read the basics
THE FOUR BASIC REQUIREMENTS
The basic requirements for any software that can network render, are that
(1)
all participating computers are able to access the original source footage,
(2)
any required fonts are loaded and active on the participating renderers,
(3)
any plugins and codecs used are also installed and available, and
(4)
all rendered frames, ie, output are send to a common storage area; single frames sequences are the best output format, a single streamed format, like an AVI, MPEG, or Quicktime Movie cannot be created by more than one computer at one time. However if your render queue has multiple single file streams queued, multiple render slaves can render the multiple queued streams, with one slave rendering one of the streams at a time two or more render slaves cannot render the same stream at the same time.
SETTING UP YOUR PROJECT TO NETWORK RENDER
Source Footage Paths
The first problem in the below example is that all the source footage is referenced using local paths. The default network rendering method Adobe use is really best suited to archiving, wherein the footage is collected from the source computer and copied to a common server in a hierarchial tree structure. In this example the source footage is comparatively short, but still over 900mb long, so there is a time issue involved, a network traffic issue, a storage issue at the server end, a server management issue, and if the network render fails, or needs to be redone, this step will need to be repeated or the process hacked by an appropriately skilled person.
To network render, all source imagery should use a file path that can be seen by other computers on a network. The best method is to use UNC (universal naming convention) paths, ie \\computername\sharedvolume\foldername\foldername\imagename.
In the above example a badly pathed file N:\TV1 Promos\sas\sas1.aif could be made legal by re-pathing to \\regan\zone2\TV1 Promos\sas\sas1.aif assuming that zone2 is an explicitly shared volume.
TIP: you can create as many share points as you want. You could, for example create an additional share point N:regan\one2\TV1 Promos\sas and call it SAS so it appears as the share \\regan\SAS. Just right-hand click on the folder you want to share, select SHARING from the menu, create the new share and give it a meaningful name; on XP systems, you also need to specify read/write access permissions.
You can create a shortcut to this or any other share, leave it on your desktop, and that will save you time navigating to that point or typing out \ \ r e g a n \ s a s
Alternatively, you can highlight a network path in explorer, copy that text, and keep pasting it when subsequently specifying paths.
There are not limitations on how many share points you can create.
An further alternative method would be to use the administrative share path, \\regan\N$\TV1 Promos\sas\sas1.aif. Here the drive letter N: is replaced by \\regan\N$. This method is particularly useful where the volumes are not explicitly shared.
One other method is to map shared volumes or folders to a drive letter, but for this to work, the drive mapping must be consistant across all participating renderers, so you would have to run around these computers mapping network shares to drives on a per job basis as required, so it is not at really very practical.
After Effects 6.5 introduced a smarter way if the project is opened on another computer on the network, it will attempt to replace the locally specified footage paths, with network paths. Mostly it works okay, sometimes it doesnt. Footage that is sourced from mapped network drives, for example where W: drive refers to \\Gfxserver2\graphics2, will have problems.
The best way is to use the UNC paths from the begining of the projects construction, then there is never an issue, and the project will always be portable, but if you forget or cant be bothered, or think that using network rather than local paths is slowing you down, ...
1) save your project,
2) open your project on another machine
3) reload one of the missing footage files ... the rest should fill themselves in, if they dont they are probably on another drive
4) check the output is network pathed
5) save the project, and submit that version to the render farm
Ultimately, for this project to network render successfully, the source footage needs to be completely specified in a manner where it is accessable by any machine on the network, so use must be made of
\\computername\VolumeLetterDollarSign\foldername\foldername\imagename, or
\\computername\sharedvolume\foldername\foldername\imagename, or
\\computername\sharedfolder\imagename methods.
Output Footage Paths and Render Settings
Once the source files have been amended to include a full network pathname, the parameters for the render can be set.
STEP ONE
In the Render Queue window, firstly choose a single frame Output Module, such as TARGA or JPEG; a single file streamed format, like an AVI, MPEG, or Quicktime Movie CAN NOT be created by more than one computer at one time. However if your render queue has multiple single file streams queued, multiple render slaves can render the multiple queued streams, with one slave rendering one of the streams at a time two or more render slaves cannot render the same stream at the same time.
STEP TWO
In the Render Settings, make sure you turn off storage overflow and turn on skip existing frames so that once any frames that have been network rendered, those frames will not be rendered again by another machine.
STEP THREE
The destination for the outputted animation should include the full network pathname, so that all the outputted files end a up in the same place.
Warning: If local paths are inadvertently used here the rendered files could be scattered over any local hard drive of the machines that will be rendering the animation, and each rendering machine would not be able to determine which frames had been rendered by other machines, so each machine could end up rendering the entire sequence itself, it the drive letter exists on that rendering machine.
Again it doesnt really matter which of the network naming methods is employed; either
\\computername\VolumeLetterDollarSign\foldername\foldername\imagename, or
\\computername\sharedvolume\foldername\foldername\imagename, or
\\computername\sharedfolder\imagename will work.
STEP FOUR
The project with its network pathed source and output files specified, and render queue setup would then be saved. -
AE CC and the Rest of Adobe Apps - ProRes Quicktime Render Gamma Problem Back AGAIN
Hi ---
With this version I am back to square one with AE NOT being able to render out correct gamma exporting to PR4444 -
Scenario (And this matter NOT whether I use Color Management or Not)
1) I open a Clip in AE or PPRO (In this case a TIFF Sequence RAW'ed from Lightroom)
2) I switch back and forth between Lightroom and AE and the images are identical in color and gamma
3) I export to PR4444 and open in Quicktime Player or FCPx and the Gamma is off.
4) If I re-import the exported file into AE - AE reads the file with a diff. gamma and the result appears to be identical with source
But it is no good that the result only looks the way it was intended in AE ! --- The poeople on the web are not viewing the movie in AE but with other players.
If i open that same tiff sequence in the quicktime player pro and export to PR4444 the results are 100% identical.
I find it highly frustrating that a company so higly regarded with so amazing software is NOT able to render out an image correctly...
This problem has been around since forever and I find it higly disturbing that this issue has not yet been addressed.
As of now I have no choice that to ditch AE and PPRO.... I WANT the images I work with to look the way they do in the app while color grading... What point is there in CG'ing images to perfection
if adobe cant even render out the results....
As I stated it does NOT matter whether I am color managing or not... Results are lighter in gamma when viewed in anything else than AE or PPRO !!!!!!
The amount to correct back is approx. a gamma of 0.9
BTW --- When in 32 bit how come I cannot set a gamma of 0.905 why is the gamma limited to two digits after the comma... 32 bit has MUCH more to offer !!!!Thanks Todd,
I have tried those tips before. Unfortunately, I haven't had great success with them in this case.
When I reserve the 16GB of RAM for other apps and RAM preview a comp containing multiple Prores 4444 footage layers, it plays back and retains the cache as expected. However, the 2nd RAM preview of another comp in the same project containing multiple Prores 4444 footage layers stays stuck in "Initializing Background Processes." A check with Activity Monitor usually shows aeselflink processes that are hung up.
This has been my experience until I came upon the work-around of precomping Prores files.
To demonstrate, here's a screen shot of the stuck process with the memory settings I used -
I rebooted the system and tried 2 more times with the same result.
If I simply precomp the Prores 4444 footage layers as demonstrated in the video, I get smooth RAM preview caching and performance. This works even if I allocated less RAM to other applications in the Memory and Multiprocessing preferences (hence the 6GB setting from earlier). With the work-around, AE runs smooth with no hiccups and RAM previews behave as expected. -
RENDER /EXPORT problems with the new CC 2014
I have updated to the new Premiere pro CC 2014 version. I realise its a standalone upgrade so i deleted the previous cc version from my pc to save disk space...
I have a 3 hour file just raw footage, with no plugins on it....
I have tried rendering to media encoder so many times, it starts the render but stops at random sections, the elapsed times still keep counting up, the remaining time counts up but the yellow bar stays at the same point and does not move...
I have tried exporting directly from Premiere Pro and once again it got to 43% and paused at this ... I have then have to press cancel get the loading mouse pointer circle and i have to close the programs through start manager...
For two days iam trying to export this file to give to a client and it wont do it and there is no solutions on the net...
I have had nothing but problems with every upgrade, on my other PC i still get audio dropouts from files and have to restart the computer.... Paying $50 a month to pull my hair out is a great investment...
please help as Adobe software is on thin ice with me...
CheersIf CC worked, I think this will allow you to go back
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
-or http://www.adobe.com/downloads/other-downloads.html -
Render Service Problem - Root Cause ALC-DSC-127-000
I have decided to write a Form Guide renderer instead of using one from the Samples. The renderer process was created by carefully observing the one in the samples. After creating the renderer, I activated it and used it in my process. In the livecycle workspace, when I try to access the initialization task, A popup error shows up. Looking at the logs revealed the following error/exception:
exception: flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service. Please review the render orchestration for this process.
2007-12-26 13:34:23,190 INFO [STDOUT] [Flex] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = render
clientId = 60F1A10E-C009-251A-6C47-179779FEB2B7
destination = task-actions
messageId = F65756D8-8D22-85D3-598E-17BBDA529B7E
timestamp = 1198694062784
timeToLive = 1198694062784
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = 60F1373F-590F-5AC8-B6A5-1296C747EA45
exception: flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service. Please review the render orchestration for this process.
2007-12-26 13:34:23,377 INFO [STDOUT] [Flex] [ERROR] Root cause: ALC-DSC-127-000: com.adobe.idp.dsc.LongLivedInvocationException: The Long Lived Service i3Renderer can not be invoked synchronously.
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:76)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:21 0)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.service.TaskManagerServiceImpl.renderForm(TaskManagerServic eImpl.java:3404)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequiresNew (EjbTransactionCMTAdapterBean.java:282)
at sun.reflect.GeneratedMethodAccessor258.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:Hi Gary,
I am getting following error message, can you pls help me with this
Mar 26, 2008 5:25:53 PM com.adobe.workspace.processes.ProcessActions getProcessInstance
WARNING: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = getProcessInstance
clientId = DA923519-C11F-EDFE-A537-D10A27A3FA00
destination = process-actions
messageId = A9726928-7AEA-8308-B7C4-ECFB90EFA472
timestamp = 1206566753361
timeToLive = 1206566753361
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = DA8DF62D-CD1E-2718-618C-0902E3DF178A
exception: flex.messaging.MessageException: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] [ERROR] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = getProcessInstance
clientId = DA923519-C11F-EDFE-A537-D10A27A3FA00
destination = process-actions
messageId = A9726928-7AEA-8308-B7C4-ECFB90EFA472
timestamp = 1206566753361
timeToLive = 1206566753361
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = DA8DF62D-CD1E-2718-618C-0902E3DF178A
exception: flex.messaging.MessageException: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] Root cause: com.adobe.idp.taskmanager.dsc.client.query.TaskQueryServiceException: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:730)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:212)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapter_z73hg_ELOImpl.doS upports(EjbTransactionCMTAdapter_z73hg_ELOImpl.java:67)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:80)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:113)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:102)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:18 3)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerQueryService.processSearch(TypedTask ManagerQueryService.java:245)
at com.adobe.workspace.processes.ProcessActions.getProcessInstance(ProcessActions.java:174)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
Caused by: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.pof.schema.POFAbstractObjectType.getAttribute(POFAbstractObjectType.java:177)
at com.adobe.pof.omapi.POFDefaultQuery.projectAttribute(POFDefaultQuery.java:634)
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:627)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:212)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapter_z73hg_ELOImpl.doS upports(EjbTransactionCMTAdapter_z73hg_ELOImpl.java:67)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:80)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:113)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:102)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:18 3)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerQueryService.processSearch(TypedTask ManagerQueryService.java:245)
at com.adobe.workspace.processes.ProcessActions.getProcessInstance(ProcessActions.java:174)
[Flex] [ERROR] Root cause: com.adobe.idp.taskmanager.dsc.client.query.TaskQueryServiceException: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:730)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.ad -
Some reason my apps cannot download in my mac security question problem
securty questionn of apple id problem i tried my apple id method also but did`t work
I strongly recommend that you use a password for each login account but primarily for your admin account which will also be required when installing any software that uses an installer and/or for something being installed to the root directory of the hard drive such as a virus would likely require. If you are ever prompted for your admin password out of the blue to install anything without purposely trying to install anything, you should always decline which not having an admin password negates.
Many single users of a Mac have an admin account (obviously and required) but create a login account without admin privileges for every day use as added security.
Besides turning on the built-in Firewall, do not enable any services/ports that you don't need or regularly use and select all options via the Advanced button under the Firewall tab. -
Should the startup disk always be at the top of the list of disks upon startup? Or is it now the case, with 10.5 on a MacBook, that the internal disk is at the top of the list whether or not it is the startup disk?
Situation: New MacBook Mac OS 10.5.8, new Western Digital Scorpio Blue WD3200BEVT 320GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive in an external MacAlly SATA FW/USB case. I erased (formated) the external drive, and, using Restore in Disk Utility, made what I expected to be a clone of the MacBook's internal drive.
Problem: After repairing permissions, using Start Up Disk preferences I selected the new drive as the start up drive. Upon restart I get mixed signals as to which is the startup drive. The original (internal) drive is at the top of the list on the right of desktop but, in the Start Up Disk Preferences list, the new drive is highlighted. (Further: I am able, after right clicking on the internal disk, to select it, to eject it.)
Questions: Have I bought a drive that won't work as a start up drive or doesn't Disk Utility Restore in 10.5.8 create a bootable drive as in 10.4 or does the internal disk always show up at the top of the list on the desktop in 10.5.8? When I swap the drives, putting the new drive in the MacBook, will it boot?
This procedure for swapping new drives has always worked with my Macs thru Mac OS 10.4.11.Check with Western Digital (the FAQs on their website) whether that hard drive is bootable on your Mac. Not all of them are.
Quote from a Western Digital FAQ:
While it may be possible to boot your computer to an external hard drive, Western Digital does not provide technical support for booting your computer using an external hard drive. If you intend to make a copy of your boot drive, or install your operating system, please use a second internal drive (EIDE or Serial ATA), rather than an external drive.
And their list of bootable drives:
The following external hard drives are bootable on Intel-based Macintosh computers systems through USB:
• My Book Essential Edition
• My Book Essential Edition 2.0
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition
• My Book Premium Edition II
• My Book Premium ES Edition
• My Book Pro Edition
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
The following external hard drives are bootable on Intel-based Macintosh computers systems through FireWire (1394a/b):
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition
• My Book Premium Edition II
• My Book Pro Edition
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
The following external hard drives are bootable on Power PC based Macintosh computers systems through FireWire (1394a/b):
• WD My Book Premium Edition
• WD My Book Pro Edition
The following external hard drives are not bootable on Power PC based Macintosh computers systems through USB/FireWire 1394(a/b):
• My Book Essential Edition
• My Book Essential Edition 2.0
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition II
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
• My Passport Elite
• My Passport Essential
• WD Passport
• WD Passport (Silver)
You will find a more up to date list on their website. -
Question/Problem with BAPI_ACC_DOCUMENT_POST in TAXACCOUNT with TAX_CODE
Hi all:
I've got a problem when I use bapi BAPI_ACC_DOCUMENT_POST.
The vendor accounts with general leader accounts associated are implemented in the position of table ACCOUNTPAYABLE and the general leader accounts go to table GLACCOUNT.
Refering to positions with vendor number I introduce the Special G/L Indicator and after this i execute bapi.
It is said I have to put the TAX_CODE in tabla TAXACCOUNT and the field AMT_BASE in table CURRENCYAMOUNT.
But when I use transaction FB01 to cread fi documents in vendor positions I don't
have obligation to introduce the TAX_CODE and afterwards I look for the document in table bseg. I can watch the field MWSKZ is blank.
Another question : I think I can find the amt_base in currency amount with the function: CALCULATE_TAX_FROM_NET_AMOUNT
Thanks a lot. Points in advance.I've resolved the question.
It depends of the special gl indicator. If it is 8 or H it doesn't need to be introduced the table taxaccount. -
Report Viewer 2012 Word Render Margin Problem
Hi all,
I am developing a asp.net web application /w visual studio 2012. I have created some reports with report viewer, and I would like to export those reports to pdf and MS Word format. The pdf output is same as I expected, but the word output is
missing top and bottom margin, it leads we cannot print the header and footer correctly in MS Word, also the repeat header on each page property didn't work too.
If I use report builder 3.0 and try to export the reports to pdf and MS Word format, the problem still exists.
Is anyone has the solution for this issue?
I think its related to sql server reporting services, please let me know if I posted at wrong category.
Thanks,
hkHi hkcheung,
According to your description, you have issues when exporting the report into Microsoft Word file. The margin of header and footer can't be displayed. And the RepeatOnNewPage property is not working. Right?
In Reporting Services, when we export the report into Word file, it will ignore page header and footer height settings. Also Word does not repeat header rows on page two and greater, although you set the
RepeatOnNewPage property of the static header row in a tablix (table, matrix, or list) to
True. For more information, please see the limitations in the link below:
Exporting to Microsoft Word (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Hi,
I have a JTree with a special renderer and editor that allows me to display a JCheckBox in the tree nodes (leaf nodes only). I'm having a problem where if the user clicks/unclicks the checkbox in the tree node, the treenode becomes unselected (The nodes lose their highlighting). I want the node to stay highlighted when the user clicks/unclicks the checkbox but no matter what I do I cant seem to make this happen.
I have a printout in the Editor method getTreeCellEditorComponent to see if the boolean arguement "selected" is true or false, and it is false every time (I put the same print out in the renderer with the same results).
The main thing I tried to do is at the end of that method setting the tree's selection path to be the 2nd arguement to the method (which is the node that is currently being drawn by the editor/render).
NOTE: the highlighting works fine as long as the checkbox is not checked. If you click the node elseware it highlights fine, but as soon as you check the checkbox, the highlighting goes away.
Any help would be greatly appreciated.
Thanks,
MarshallPlease post the code which we could run.
Denis Krukovsky
http://dotuseful.sourceforge.net/
Maybe you are looking for
-
help!!! My new phone is asking for a password but I never set one and am locked out - what can I do?!?!
-
HELP! Nothing is working properly on my torch!
Hi Hi hopefully someone can give me some advice or help, as I don't know what else to do! Where shall I start, I've had my BB Torch for 12 months but it started having problems after just 3. Firstly it will not recognise my password anymore, it was
-
HT1420 how do i authorise my I phone
Does anyone know how to authorise my i phone to my apple account
-
Creating Purchasing info records using transaction ME11
Hello Friends, I am trying to post Purchase info records through ME11. Everything is fine but we are not able to record the Conditions tab - i.e, Condition Qty & scale Quantities, Can anybody Please help is there any BAPI or any Function module to Po
-
does not work now that i have migrated to mac mini os 10.9 how can i print or create a contact sheet in bridge cs5 using OS 10.9?