Render Queue stopped working
I have done about 50 comps in the past few days when all of a sudden it stops working. I hit render and nothing happens. But it does start rendering and a blank file appears but it's not correct. In fact the render once started never ends. So it's a bug with cc 14. I tried re-starting, creating a new project. But I'm stuck. I might have to do a re- install.
{windows 7 hp z800}
What changed? Software update? Settings? Destination drive or folder? Source footage or file type? Plug-ins used?
Try rendering a project that worked before. If that is successful, start digging into the changes in the projects that are having problems. If nothing works then see the first question. Something did.
Similar Messages
-
SSRS Execution Service Render Method stopped working
Hello SSRS Profis!
I'm having the following Problem:
I was trying to integrate SSRS in my Company-Software, and until today it went quite good:
Its an ASPMVC 5 project with WCF-Services, and in these i had methods to render reports with the help of the ReportExecution - Webservice (2005), the Version of the MSSQL Server we use is 2008R2, reports use stored procedures as data sets.
Everything worked fine, i could render all my reports in the services, gave the result back to the Frontendprojects to present it there, it worked fast and properly.
Until today: For some reason, the call of the ReportExection.Render() - Method gives no more results back.
Debugging shows me that it works approx. the same time as it did before for every report, but the result now is only "null" for every report i integrated until now:
Here is the code I use to execute the service (for network credentials i use a user with administrator privilegue who can access all the reports (tested in private session), Parameter constructio also should work properly because it did before, same
for the Report path...
Any Ideas would be helpful!
private byte[] getPDFFromReport(string ReportPath, Dictionary<string, string> parameterDicitionary)
ReportExecutionService rs = new ReportExecutionService();
// private method to set a user with enough permissions
rs.Credentials = SetServiceAccount();
// Render arguments
byte[] result = null;
string reportPath = ReportPath;
string format = "PDF";
string historyID = null;
string devInfo = @"<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>";
// Prepare report parameter.// mapping Parameters, gives back ReportExecution.ParamaterValue Array, still works as it should
ParameterValue[] parameters = SetReportParameters(reportPath, parameterDicitionary); DataSourceCredentials[] credentials = null;
string showHideToggle = null;
string encoding;
string mimeType;
string extension;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;
string[] streamIDs = null;
ExecutionInfo execInfo = new ExecutionInfo();
ExecutionHeader execHeader = new ExecutionHeader();
rs.ExecutionHeaderValue = execHeader;
execInfo = rs.LoadReport(reportPath, historyID);
rs.SetExecutionParameters(parameters, "de-de");
// rs.Timeout = 300000;
String SessionId = rs.ExecutionHeaderValue.ExecutionID;
Console.WriteLine("SessionID: {0}", rs.ExecutionHeaderValue.ExecutionID);
try
result = rs.Render(format, devInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
execInfo = rs.GetExecutionInfo();
Console.WriteLine("Execution date and time: {0}", execInfo.ExecutionDateTime);
catch (SoapException e)
Console.WriteLine(e.Detail.OuterXml);
// Write the contents of the report to an MHTML file.
return result;
Edit:
I tested the methods with the same user in an WindowsForms Project and got a result. In a former Version, it also still works. I changed nothing since the last deploy in this methods, so can't imagine why it suddenly stopped working....Found the solution!
After checking team-foundation-changelogs of the last checkins, it turned out that somehow automatically some value in the reference.cs of the reportexecution - webservice was changed from:
[return: System.Xml.Serialization.XmlElementAttribute("Result", DataType="base64Binary")]
to
[return: System.Xml.Serialization.XmlElementAttribute("Value", DataType="base64Binary")]
After deleting and readding the webreference to the Project, it worked again.
The next Thing to Research for me is how it can be, that this value automatically changes. Possibly because of different Versions of VS in the dev-Team.. (Ultimate and premium) In any case, this issue is solved, thank you for reading :) -
Render Queue not working in Media Composer CC
WHen I send a file to the Queue in Media composer from Premiere AME opens with nothing in the queue. Any thoughts on fixing this?
It's not always instantaneous. How long do you wait for the sequence to show up?
-
Media Encoder CS6 won't render queued project from Pr CS6
What's up with Adobe? All of a sudden, Pr CS6 no longer works with AME. I Queue from Pr and AME launches with file in Queue. I press Render button, and it takes several minutes before anything shows up in a the Encoding tab. When it does, I get an endless "Connecting to Dynamic Link server..." message, before finally, after several minutes, it fails. Log states that it can't read the source file. I suspect this is a Dynamic Link issue, since the source file is exactly where the log says it should be. I've noticed recently that Dynamic Link hung up also when trying to send a clip to Ae to round trip effects back to Pr. I just ended up doing the work in Ae and imported it manually into Pr. So much for the heralded 'interoperability'. You spend a couple grand on CS6 Master Collection to have all the tools, and many of them have all kinds of issues. Au, for example, crashes 75% of the time when I open it. Reopen it again and it works fine. Ae often continually gives me 'program has stopped working' dialog with an option to quit, and many times it is talking about one of many instances it has launched in the background, and when I say 'quit', the main program I see just keeps on working. And now, out of the blue, Pr / AME queuing stopped working. It's worked since I installed CS6 over a year ago with no issues, with th elast time being about a month ago, now it doesn't. BTW, I'm on CS6 on an HP Z820. Win 7 Ultimate. And I tried all the solutions posted under the similar problem someone posted about the CC version. Confirmed that dynamiclinkmanager is running.
> Adobe tools aren't the best option for upscaling.
Huh?
If you can find something better than After Effects CC (12.2) with the Detail-Preserving Upscale effect for up-saling, I want to know what it is. -
Can't export .MOV in AE cc render queue, But I can Export .MOV using Media Encoder cc
I get “[file path and name].mov”. An output module failed. The file may be damaged or corrupted. (-1610153464) when trying to export .mov using AE cc render queue but works fine in media Encoder cc. My problem is that i need to export animation with alpfa channel for a client and cannot find an alpha channel option in media encoder.
Please helpTo export with an alpha channel in Adobe Media Encoder, choose "32 bit" from the Depth menu under the Video tab in the export settings. (That refers to 32 bits per pixel: 8 each for R, G, B, and A.) Of course, that option is only available if the codec can include an alpha channel, such as with the Animation codec in a QuickTime container.
To deal with QuickTime problems with After Effects CC (12.0), start here:
http://bit.ly/QT_AE_CC_12 -
Multiprocessing works for RAM preview, extremely slow and aeselflink crashes when in Render Queue
Hello all,
System specs:
Hackintosh
OSX 10.9
3.5Ghz (overclocked to 4.2Ghz) Core i7
Geforce GTX 580 classified 3GB Cuda GPU
AMD Radeon HD 6870 1GB Display GPU
32 GB of RAM
System SSD
5 drive internal RAID
After Effects CC 12.2.1.5
Cuda drivers up to date
I'm having a problem with the render queue and multiprocessing. I have a moderate sequence with several effects and 3D layers. When I'm working in the composition, everything goes great. I can RAM preview and all my CPU cores will kick up to 100% and render the composition in no time all; with full resolution with no skipped frames. It works fantastically.
Then when I go to render the exact same composition with the same multiprocessing settings, AE will hang at the "initializing background processes" for at least 5-10 minutes, during which the CPU will ramp up to 100% but no frames will be rendered. AE still remains responsive, as I can hit the stop or pause buttons and the queue will be cancled. But then the aeselflink processes (up to 8 of them depending on my settings, I've tried several) will still continue at 100% cpu load even with AE not set to render anything. I will have to go into the activity monitor and force quit each process. If I leave it for 5-10 minutes, it will finally stop initalizing and start the render, but the CPU will still run at 100% but the frames will crawl slowly forward at about 1 frame per minute, with an estimated 28 hours to render frames that were rendering in under a minute during RAM preview.
I have tried both reducing the number of cores AE will use, adjusting the allocated RAM, and disabling multiprocessing alltogether. When I disable multiprocessing, the render slows to a complete crawl, and it will render around 1 frame every 5-10 seconds. Again, this is on a composition that rendered in less than a minute on full resolution with RAM preview.
The only way to get this composition to render is to export it to Media Encoder, which will render it (without multicore processing, unfortunately) in about 8 minutes, still not the blazing fast RAM preview but at least it finishes it in under 3.5 hours (the amount of time that the multiprocessing disabled render in AE will take).
Here's the multiprocessing settings that have been very stable and carried me through other projects. Disk Cache is not enabled. The only other thing that is disabled is the "Disable Layer Cache" under the Secret menu as the plugins I'm using (Plexus 2 in this case) doesn't like to update when the camera moves so this option has been disabled to force it to reset each frame.
Does anyone know what is going on?
Also, please don't tell me that I should not use multiprocessing or instruct me on basic steps as to increase preformance on my machine. I have been tweaking my memory and multiprocessing settings for a long time now, and it is completely stable in everything but this setup. So please no answers saying "just don't use multiprocessing". It was made for a reason, it's effective, and it's needed. And please don't say that it's the hackintosh, either, as it's the most stable and powerful computer I've ever used. Sorry for the disclaimers, I just want to have constructive help.
Thank you in advance for your ideas!Hi Rick, not sure if you saw the part where I said please don't reply with turning off Multiprocessing, and I did not say that it works and is effective in all areas. However, if you actally take the time to read my post, you will definately notice that RAM preview with multiprocessing takes under a minute to render a scene. Multiprocessing disabled and rendered in AE takes 3.5 hours. In Media Encoder it takes around 8 minutes. Clearly it IS working and IS effective for my case and my rig. Any vendettas against MP does not help my situation at all.
-
After Effects Rendering Queue has Stopped Working
Hello, Everyone:
Just yesterday, I was having a blast creating some shine-through text animations in After Effects. Today, while working on a new project, the Render Queue just hangs when I try to render my project. Is there any way to fix this?
Thanks in advanced,
David.My render details are simple enough - HD 1080, AVI, "lossless with alpha". My system is handling the work just fine, after my recent upgrade. But everything was same-same from the project just yesterday. The difference was that, today, when I clicked "render" after queuing the project, it just sat there until I finally gave up. And the project was a simple opacity change of some text.
I haven't rebooted. Should have tried that first. At present, I'm re-installing. Once re-installed, I'll reboot as well, of course - and then let you know.
Thanks. -
SharePoint 2013 List View with query string filter stops working after editing view from browser
I have created one list definition in which I have added one list view which will filter data from query string paramater
So when I am creating list from my list definition, view with query string filter is working fine.
But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
Any suggestion what I am missing?
Below is my list view schema
<View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
<Toolbar Type="Standard" />
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
<ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
</ParameterBindings>
<JSLink>hierarchytaskslist.js</JSLink>
<XslLink Default="TRUE">main.xsl</XslLink>
<JSLink>clienttemplates.js</JSLink>
<RowLimit Paged="TRUE">100</RowLimit>
<ViewFields>
<FieldRef Name="Body"></FieldRef>
<FieldRef Name="Title"></FieldRef>
<FieldRef Name="StartDate"></FieldRef>
<FieldRef Name="DueDate"></FieldRef>
</ViewFields>
<ViewData>
<FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
<FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
</ViewData>
<Query>
<Where>
<Eq>
<FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
<Value Type="Lookup">{TargetId}</Value>
</Eq>
</Where>
</Query>
</View>
I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.Hi JayJT,
The Miscellaneous is located in the contact list that you used for the connection.
So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Hi.
It used to work.
I have problem with sound. Yesterday It does work, but today it stopped working. I'm not sure if it is because of some updates, I haven't noticed anything connected to sound. The only difference is that I uninstalled mplayer2. Then it stopped working - but I'm not sure if it was because of this.
I tried:
reinstall alsa, alsa-plugins, alsa-utils, vlc, mplayer2
install pulseaudio, oss (without configuration)
reboot
unmute all chanels in alsamixer
connecting headphones
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default:CARD=PCH
HDA Intel PCH, ALC269VC Analog
Default Audio Device
sysdefault:CARD=PCH
HDA Intel PCH, ALC269VC Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
lspci|grep -i audio
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
lsmod|grep '^snd'|column -t
snd_hda_codec_hdmi 27857 1
snd_hda_codec_realtek 62279 1
snd_hda_intel 33946 0
snd_hda_codec 101474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6364 1 snd_hda_codec
snd_pcm 76956 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
snd_timer 18687 1 snd_pcm
snd 58893 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
pacman -Q |egrep -wi --color 'vlc|audio|alsa|mplayer2|oss|pulse|sound'
alsa-lib 1.0.27-1
alsa-plug]alsa-lib 1.0.27-1
alsa-plugins 1.0.27-1
alsa-utils 1.0.27-4
lib32-alsa-lib 1.0.27-1ins 1.0.27-1
alsa-utils 1.0.27-4
lib32-alsa-lib 1.0.27-1
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 06XK 03/16/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x19fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 180000000 mask FE0000000 write-back
[ 0.000000] 7 base 19FE00000 mask FFFE00000 uncachable
[ 0.000000] 8 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
[ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x19fdfffff]
[ 0.000000] [mem 0x100000000-0x19fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x19fdfffff @ [mem 0xd9c9b000-0xd9c9efff]
[ 0.000000] RAMDISK: [mem 0x37a50000-0x37d1ffff]
[ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 00000000daffe120 00084 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000daff2000 0803C (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf47000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafe7000 0022E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fdfffff]
[ 0.000000] NODE_DATA [mem 0x19fdfb000-0x19fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199400000-ffff88019f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x19fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x19fdfffff]
[ 0.000000] On node 0 totalpages: 1545773
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 141 pages reserved
[ 0.000000] DMA zone: 3776 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13859 pages used for memmap
[ 0.000000] DMA32 zone: 873085 pages, LIFO batch:31
[ 0.000000] Normal zone: 10232 pages used for memmap
[ 0.000000] Normal zone: 644616 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019fa00000 s85184 r8192 d21312 u262144
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1521477
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6002944k/6813696k available (4908k kernel code, 630604k absent, 180148k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1596.383 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.79 BogoMIPS (lpj=5321276)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000038] Security Framework initialized
[ 0.000045] AppArmor: AppArmor disabled by boot time parameter
[ 0.000630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002565] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003415] Mount-cache hash table entries: 256
[ 0.003607] Initializing cgroup subsys cpuacct
[ 0.003609] Initializing cgroup subsys memory
[ 0.003616] Initializing cgroup subsys devices
[ 0.003618] Initializing cgroup subsys freezer
[ 0.003620] Initializing cgroup subsys net_cls
[ 0.003622] Initializing cgroup subsys blkio
[ 0.003647] Disabled fast string operations
[ 0.003649] CPU: Physical Processor ID: 0
[ 0.003650] CPU: Processor Core ID: 0
[ 0.003655] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003658] mce: CPU supports 7 MCE banks
[ 0.003671] CPU0: Thermal monitoring enabled (TM1)
[ 0.003677] process: using mwait in idle threads
[ 0.003681] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.003835] Freeing SMP alternatives: 20k freed
[ 0.004849] ACPI: Core revision 20121018
[ 0.011331] ftrace: allocating 19310 entries in 76 pages
[ 0.022372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055356] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[ 0.055365] TSC deadline timer enabled
[ 0.055369] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.055376] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.055378] ... version: 3
[ 0.055379] ... bit width: 48
[ 0.055380] ... generic registers: 4
[ 0.055381] ... value mask: 0000ffffffffffff
[ 0.055382] ... max period: 000000007fffffff
[ 0.055383] ... fixed-purpose events: 3
[ 0.055384] ... event mask: 000000070000000f
[ 0.093170] Disabled fast string operations
[ 0.095374] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.113177] Disabled fast string operations
[ 0.126599] Disabled fast string operations
[ 0.082145] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.128712] Brought up 4 CPUs
[ 0.128716] smpboot: Total of 4 processors activated (12776.19 BogoMIPS)
[ 0.132574] devtmpfs: initialized
[ 0.133773] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[ 0.134524] RTC time: 14:38:00, date: 04/23/13
[ 0.134565] NET: Registered protocol family 16
[ 0.134701] ACPI: bus type pci registered
[ 0.134776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.134779] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.142122] PCI: Using configuration type 1 for base access
[ 0.142308] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.142309] mtrr: probably your BIOS does not setup all CPUs.
[ 0.142310] mtrr: corrected configuration.
[ 0.142733] bio: create slab <bio-0> at 0
[ 0.142794] ACPI: Added _OSI(Module Device)
[ 0.142795] ACPI: Added _OSI(Processor Device)
[ 0.142797] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.142798] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.144238] ACPI: EC: Look up EC in DSDT
[ 0.145725] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148149] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.149385] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.149747] ACPI: Dynamic OEM Table Load:
[ 0.149750] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.150021] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.150411] ACPI: Dynamic OEM Table Load:
[ 0.150414] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.150533] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.150890] ACPI: Dynamic OEM Table Load:
[ 0.150892] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.152416] ACPI: Interpreter enabled
[ 0.152421] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.152442] ACPI: Using IOAPIC for interrupt routing
[ 0.159354] ACPI: Power Resource [FN00] (off)
[ 0.159432] ACPI: Power Resource [FN01] (off)
[ 0.159506] ACPI: Power Resource [FN02] (off)
[ 0.159581] ACPI: Power Resource [FN03] (off)
[ 0.159654] ACPI: Power Resource [FN04] (off)
[ 0.159950] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.160074] ACPI: No dock devices found.
[ 0.160078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.160290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.160292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.160531] \_SB_.PCI0:_OSC invalid UUID
[ 0.160532] _OSC request data:1 8 1f
[ 0.160943] PCI host bridge to bus 0000:00
[ 0.160946] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.160949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.160951] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.160952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.160954] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.160956] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.160965] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.161009] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.161021] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.161028] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.161033] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
[ 0.161093] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.161118] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[ 0.161201] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.161240] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.161264] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[ 0.161361] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.161391] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.161408] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[ 0.161483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.161509] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.161596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.161628] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.161714] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.161746] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.161876] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.161921] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.161945] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[ 0.162042] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.162072] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.162207] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.162228] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
[ 0.162236] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
[ 0.162245] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
[ 0.162254] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
[ 0.162263] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
[ 0.162272] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[ 0.162324] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.162346] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.162363] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[ 0.162392] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.162635] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[ 0.162815] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[ 0.163511] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.169202] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.169209] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.169339] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.169408] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.169530] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.169605] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.169935] pci 0000:02:00.0: supports D1 D2
[ 0.169937] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175788] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.175797] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.175816] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.175957] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.175995] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[ 0.176190] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.182448] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.182462] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.182529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.182568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.182598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.182726] \_SB_.PCI0:_OSC invalid UUID
[ 0.182727] _OSC request data:1 1f 1f
[ 0.182731] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.182732] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.183395] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.183442] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.183487] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.183530] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.183573] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.183616] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.183662] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.183709] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.183797] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.183801] vgaarb: loaded
[ 0.183802] vgaarb: bridge control possible 0000:00:02.0
[ 0.183834] PCI: Using ACPI for IRQ routing
[ 0.185498] PCI: pci_cache_line_size set to 64 bytes
[ 0.185611] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.185613] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[ 0.185615] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.185616] e820: reserve RAM buffer [mem 0x19fe00000-0x19fffffff]
[ 0.185709] NetLabel: Initializing
[ 0.185711] NetLabel: domain hash size = 128
[ 0.185712] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185729] NetLabel: unlabeled traffic allowed by default
[ 0.185745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.185750] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.187760] Switching to clocksource hpet
[ 0.192350] pnp: PnP ACPI init
[ 0.192366] ACPI: bus type pnp registered
[ 0.192633] pnp 00:00: [dma 4]
[ 0.192731] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.192753] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.192844] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.192878] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.192924] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.192927] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.192929] system 00:04: [io 0x5000-0x5003] has been reserved
[ 0.192931] system 00:04: [io 0xffff] has been reserved
[ 0.192932] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.192938] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.192940] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.192942] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.192944] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.192946] system 00:04: [io 0x5000-0x500f] could not be reserved
[ 0.192949] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192975] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.193023] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.193027] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.193068] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.193112] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.193267] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.193270] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.193272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.193274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.193276] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.193278] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.193280] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.193282] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.193284] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.193286] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.193288] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193629] ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20121018/utresrc-650)
[ 0.193634] pnp 00:0a: can't evaluate _CRS: 12311
[ 0.193738] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.193762] pnp: PnP ACPI: found 11 devices
[ 0.193764] ACPI: ACPI bus type pnp unregistered
[ 0.200460] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.200467] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.200477] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.200481] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.200489] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.200497] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.200503] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.200541] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.200543] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.200545] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.200546] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.200548] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.200550] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.200552] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.200554] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.200556] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.200587] NET: Registered protocol family 2
[ 0.200783] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.201021] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.201188] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.201218] TCP: reno registered
[ 0.201232] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.201269] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.201357] NET: Registered protocol family 1
[ 0.201372] pci 0000:00:02.0: Boot video device
[ 0.201548] PCI: CLS 64 bytes, default 64
[ 0.201591] Unpacking initramfs...
[ 0.261406] Freeing initrd memory: 2880k freed
[ 0.261899] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.261905] software IO TLB [mem 0xd5c9b000-0xd9c9b000] (64MB) mapped at [ffff8800d5c9b000-ffff8800d9c9afff]
[ 0.262304] audit: initializing netlink socket (disabled)
[ 0.262319] type=2000 audit(1366727880.259:1): initialized
[ 0.276840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.278407] VFS: Disk quotas dquot_6.5.2
[ 0.278450] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.278614] msgmni has been set to 11730
[ 0.278836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.278888] io scheduler noop registered
[ 0.278891] io scheduler deadline registered
[ 0.278897] io scheduler cfq registered (default)
[ 0.279146] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.279147] vesafb: scrolling: redraw
[ 0.279149] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.279531] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k
[ 0.344149] Console: switching to colour frame buffer device 128x48
[ 0.408701] fb0: VESA VGA frame buffer device
[ 0.408712] intel_idle: MWAIT substates: 0x21120
[ 0.408714] intel_idle: v0.4 model 0x2A
[ 0.408715] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.408750] GHES: HEST is not enabled!
[ 0.408800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.409237] Linux agpgart interface v0.103
[ 0.409304] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 0.416404] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.416417] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.416540] mousedev: PS/2 mouse device common for all mice
[ 0.416900] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.416930] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.417022] cpuidle: using governor ladder
[ 0.417127] cpuidle: using governor menu
[ 0.417129] EFI Variables Facility v0.08 2004-May-17
[ 0.417180] drop_monitor: Initializing network drop monitor service
[ 0.417252] TCP: cubic registered
[ 0.417348] NET: Registered protocol family 10
[ 0.417495] NET: Registered protocol family 17
[ 0.417505] Key type dns_resolver registered
[ 0.417796] PM: Hibernation image not present or could not be loaded.
[ 0.417805] registered taskstats version 1
[ 0.418395] Magic number: 9:780:637
[ 0.418468] rtc_cmos 00:05: setting system clock to 2013-04-23 14:38:01 UTC (1366727881)
[ 0.420125] Freeing unused kernel memory: 820k freed
[ 0.420254] Write protecting the kernel read-only data: 8192k
[ 0.423156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.424428] Freeing unused kernel memory: 1224k freed
[ 0.425960] Freeing unused kernel memory: 440k freed
[ 0.433142] systemd-udevd[57]: starting version 201
[ 0.458283] ACPI: bus type usb registered
[ 0.458349] usbcore: registered new interface driver usbfs
[ 0.458370] usbcore: registered new interface driver hub
[ 0.458506] usbcore: registered new device driver usb
[ 0.458848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.458984] ehci-pci: EHCI PCI platform driver
[ 0.459037] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.459041] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.459047] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.459062] ehci-pci 0000:00:1a.0: debug port 2
[ 0.462962] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.462983] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[ 0.463303] SCSI subsystem initialized
[ 0.464366] ACPI: bus type scsi registered
[ 0.464443] libata version 3.00 loaded.
[ 0.464501] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.464512] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 0.470946] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.471264] hub 1-0:1.0: USB hub found
[ 0.471272] hub 1-0:1.0: 2 ports detected
[ 0.471541] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.471545] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.471551] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.471576] ehci-pci 0000:00:1d.0: debug port 2
[ 0.475501] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.475524] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[ 0.484257] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.484616] hub 3-0:1.0: USB hub found
[ 0.484625] hub 3-0:1.0: 2 ports detected
[ 0.484916] ahci 0000:00:1f.2: version 3.0
[ 0.485018] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 0.485078] ahci: SSS flag set, parallel bus scan disabled
[ 0.485142] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
[ 0.485145] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.485152] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.498266] scsi0 : ahci
[ 0.498400] scsi1 : ahci
[ 0.498501] scsi2 : ahci
[ 0.498607] scsi3 : ahci
[ 0.498716] scsi4 : ahci
[ 0.498823] scsi5 : ahci
[ 0.498879] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
[ 0.498883] ata2: DUMMY
[ 0.498885] ata3: DUMMY
[ 0.498888] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40
[ 0.498891] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
[ 0.498893] ata6: DUMMY
[ 0.527671] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 0.527678] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 0.527683] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.527688] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 0.527693] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.527949] xHCI xhci_add_endpoint called for root hub
[ 0.527951] xHCI xhci_check_bandwidth called for root hub
[ 0.527980] hub 2-0:1.0: USB hub found
[ 0.527988] hub 2-0:1.0: 2 ports detected
[ 0.528084] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.528088] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.528278] xHCI xhci_add_endpoint called for root hub
[ 0.528282] xHCI xhci_check_bandwidth called for root hub
[ 0.528325] hub 4-0:1.0: USB hub found
[ 0.528336] hub 4-0:1.0: 2 ports detected
[ 0.777504] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.817457] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.818156] ata1.00: ATA-9: SAMSUNG MZ7PC128HAFU-000, CXM02K1Q, max UDMA/133
[ 0.818173] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.818687] ata1.00: configured for UDMA/133
[ 0.818930] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PC128 CXM0 PQ: 0 ANSI: 5
[ 0.901417] hub 1-1:1.0: USB hub found
[ 0.901487] hub 1-1:1.0: 6 ports detected
[ 1.007327] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.131530] hub 3-1:1.0: USB hub found
[ 1.131707] hub 3-1:1.0: 6 ports detected
[ 1.137166] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.210698] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.263792] tsc: Refined TSC clocksource calibration: 1596.373 MHz
[ 1.263808] Switching to clocksource tsc
[ 1.456959] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.460046] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.460135] sd 0:0:0:0: [sda] Write Protect is off
[ 1.460139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.460170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.461145] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.461569] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.668989] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.706891] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
[ 1.790244] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 1.791051] systemd[1]: Set hostname to <530uarch>.
[ 1.859141] systemd[1]: Cannot add dependency job for unit ntpd.service, ignoring: Unit ntpd.service failed to load: No such file or directory. See system logs and 'systemctl status ntpd.service' for details.
[ 1.859155] systemd[1]: Cannot add dependency job for unit laptop-mode.service, ignoring: Unit laptop-mode.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode.service' for details.
[ 1.859170] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 1.859349] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.859395] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.859406] systemd[1]: Starting Remote File Systems.
[ 1.859417] systemd[1]: Reached target Remote File Systems.
[ 1.859425] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
[ 1.859434] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.859461] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.859468] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.859487] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.859494] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.859516] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.859524] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.859547] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.859558] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.859587] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.859595] systemd[1]: Starting Paths.
[ 1.859603] systemd[1]: Reached target Paths.
[ 1.859626] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.859714] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.859722] systemd[1]: Starting Encrypted Volumes.
[ 1.859731] systemd[1]: Reached target Encrypted Volumes.
[ 1.859784] systemd[1]: Starting udev Kernel Socket.
[ 1.859803] systemd[1]: Listening on udev Kernel Socket.
[ 1.859845] systemd[1]: Starting udev Control Socket.
[ 1.859868] systemd[1]: Listening on udev Control Socket.
[ 1.859877] systemd[1]: Starting Journal Socket.
[ 1.859912] systemd[1]: Listening on Journal Socket.
[ 1.859945] systemd[1]: Mounting Huge Pages File System...
[ 1.893494] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.898344] systemd[1]: Started Load Kernel Modules.
[ 1.898365] systemd[1]: Mounted FUSE Control File System.
[ 1.899753] systemd[1]: Starting Apply Kernel Variables...
[ 1.923663] systemd[1]: Mounting Configuration File System...
[ 1.930086] systemd[1]: Starting udev Coldplug all Devices...
[ 1.936854] systemd[1]: Starting Journal Service...
[ 1.950121] systemd[1]: Started Journal Service.
[ 1.950178] systemd[1]: Starting Setup Virtual Console...
[ 1.960089] systemd[1]: Starting Create static device nodes in /dev...
[ 1.967386] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.967414] systemd[1]: Mounting Debug File System...
[ 1.976595] systemd[1]: Starting Swap.
[ 1.976618] systemd[1]: Reached target Swap.
[ 1.976647] systemd[1]: Mounting Temporary Directory...
[ 2.023332] systemd[1]: Started File System Check on Root Device.
[ 2.023347] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.060070] systemd[1]: Expecting device dev-disk-by\x2duuid-1166c42d\x2dd01a\x2d40bf\x2d8926\x2d2795b3f0b834.device...
[ 2.060097] systemd[1]: Expecting device dev-disk-by\x2duuid-C332\x2d535C.device...
[ 2.060597] systemd[1]: Mounted Huge Pages File System.
[ 2.060732] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.062885] EXT4-fs (sda1): re-mounted. Opts: commit=15,data=ordered,discard
[ 2.079953] systemd[1]: Started Apply Kernel Variables.
[ 2.080081] systemd[1]: Mounted Configuration File System.
[ 2.091845] systemd[1]: Started Setup Virtual Console.
[ 2.093312] systemd[1]: Started Create static device nodes in /dev.
[ 2.093419] systemd[1]: Mounted Debug File System.
[ 2.093493] systemd[1]: Mounted Temporary Directory.
[ 2.093753] systemd[1]: Started Remount Root and Kernel File Systems.
[ 2.106639] systemd[1]: Started udev Coldplug all Devices.
[ 2.106691] systemd[1]: Starting Load Random Seed...
[ 2.113536] systemd[1]: Starting udev Kernel Device Manager...
[ 2.119903] systemd[1]: Started Load Random Seed.
[ 2.122479] systemd-udevd[142]: starting version 202
[ 2.126885] systemd[1]: Started udev Kernel Device Manager.
[ 2.126941] systemd[1]: Starting Local File Systems (Pre).
[ 2.126955] systemd[1]: Reached target Local File Systems (Pre).
[ 2.182697] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 2.182707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.182713] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.182718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.182720] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.182724] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.182726] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.182731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.182733] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.183607] ACPI: AC Adapter [ADP1] (on-line)
[ 2.184967] ACPI: Requesting acpi_cpufreq
[ 2.187346] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.187393] ACPI: Lid Switch [LID0]
[ 2.187480] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.187487] ACPI: Power Button [PWRB]
[ 2.190425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.190433] ACPI: Power Button [PWRF]
[ 2.191578] mei 0000:00:16.0: setting latency timer to 64
[ 2.191674] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[ 2.198369] [drm] Initialized drm 1.1.0 20060810
[ 2.198487] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[ 2.198496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.207287] ACPI: Battery Slot [BAT1] (battery present)
[ 2.210635] ACPI: Fan [FAN0] (off)
[ 2.210696] ACPI: Fan [FAN1] (off)
[ 2.210754] ACPI: Fan [FAN2] (off)
[ 2.210806] ACPI: Fan [FAN3] (off)
[ 2.210877] ACPI: Fan [FAN4] (off)
[ 2.211218] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 2.213278] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.213283] ACPI: Thermal Zone [TZ00] (61 C)
[ 2.214137] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.214139] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.231486] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.231742] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[ 2.236625] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.236988] r8169 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.237512] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004ef8000, e8:03:9a:97:b5:a7, XID 0c900800 IRQ 48
[ 2.237516] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.254854] cfg80211: Calling CRDA to update world regulatory domain
[ 2.258073] samsung_laptop: detected SABI interface: SwSmi@
[ 2.258077] samsung_laptop: Backlight controlled by ACPI video driver
[ 2.271599] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.271604] Copyright(c) 2003-2012 Intel Corporation
[ 2.272199] iwlwifi 0000:01:00.0: irq 49 for MSI/MSI-X
[ 2.273865] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 2.274238] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.274354] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.276284] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
[ 2.276358] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
[ 2.276360] systemd[1]: Starting File System Check on /dev/disk/by-uuid/1166c42d-d01a-40bf-8926-2795b3f0b834...
[ 2.277330] [drm] Memory usable by graphics device = 2048M
[ 2.277337] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 2.277340] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.277356] Console: switching to colour dummy device 80x25
[ 2.277856] i915 0000:00:02.0: setting latency timer to 64
[ 2.293728] iTCO_vendor_support: vendor-support=0
[ 2.294474] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.295948] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.296080] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.296784] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.296789] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.296792] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.296794] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 2.296797] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[ 2.296800] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 2.297034] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 2.309676] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
[ 2.309725] systemd[1]: Mounting /mnt/shard...
[ 2.315045] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[ 2.326398] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[ 2.326694] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.326697] [drm] Driver supports precise vblank timestamp query.
[ 2.326780] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.329470] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.335638] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[ 2.339306] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[ 2.339922] systemd[1]: Starting Sound Card.
[ 2.339944] systemd[1]: Reached target Sound Card.
[ 2.344210] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.353017] systemd-udevd[151]: renamed network interface eth0 to enp2s0
[ 2.356365] systemd-udevd[152]: renamed network interface wlan0 to wlp1s0
[ 2.359280] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2.403861] fbcon: inteldrmfb (fb0) is primary device
[ 2.412172] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: commit=15,data=ordered,discard
[ 2.523824] usb 3-1.5: USB disconnect, device number 3
[ 2.608485] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 2.615267] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 2.885607] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 2.900591] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[ 2.975438] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[ 3.013202] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 3.020042] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 3.252446] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 3.415660] Console: switching to colour frame buffer device 170x48
[ 3.424244] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.424247] i915 0000:00:02.0: registered panic notifier
[ 3.436609] acpi device:32: registered as cooling_device9
[ 3.436968] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.437019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 3.437169] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.496648] Non-volatile memory driver v1.3
[ 3.963276] Bluetooth: Core ver 2.16
[ 3.963296] NET: Registered protocol family 31
[ 3.963298] Bluetooth: HCI device and connection manager initialized
[ 3.963305] Bluetooth: HCI socket layer initialized
[ 3.963307] Bluetooth: L2CAP socket layer initialized
[ 3.963313] Bluetooth: SCO socket layer initialized
[ 3.964708] usbcore: registered new interface driver btusb
[ 4.338375] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4.468607] media: Linux media interface: v0.10
[ 4.471891] Linux video capture interface: v2.00
[ 4.518478] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 4.537926] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[ 4.538078] usbcore: registered new interface driver uvcvideo
[ 4.538083] USB Video Class driver (1.1.1)
[ 6.473768] wlp1s0: authenticate with 00:24:8c:eb:ff:66
[ 6.480100] wlp1s0: send auth to 00:24:8c:eb:ff:66 (try 1/3)
[ 6.482750] wlp1s0: authenticated
[ 6.483074] iwlwifi 0000:01:00.0 wlp1s0: disabling HT as WMM/QoS is not supported by the AP
[ 6.483084] iwlwifi 0000:01:00.0 wlp1s0: disabling VHT as WMM/QoS is not supported by the AP
[ 6.483367] wlp1s0: associate with 00:24:8c:eb:ff:66 (try 1/3)
[ 6.486701] wlp1s0: RX AssocResp from 00:24:8c:eb:ff:66 (capab=0x431 status=0 aid=2)
[ 6.496708] wlp1s0: associated
[ 6.496833] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 6.534112] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:24:8c:eb:ff:66
[ 776.460690] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 776.473529] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 969.874854] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 969.887746] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 1061.757868] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 1061.790334] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 1346.112078] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 1346.143576] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 2241.768058] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 2241.780927] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 2341.444767] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 2341.479230] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
cat /etc/asound.conf (which was working)
defaults.pcm.card 0
defaults.pcm.device 0
defaults.ctl.card 0
Trying to play a file:
mplayer Music/Arctic\ Monkeys/Favourite\ Most\ Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3
MPlayer2 UNKNOWN (C) 2000-2012 MPlayer Team
[ass] FcFreeTypeQueryFace failed
Cannot open file '/home/dan/.mplayer/input.conf': No such file or directory
Failed to open /home/dan/.mplayer/input.conf.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
Playing Music/Arctic Monkeys/Favourite Most Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3.
Detected file format: MP2/3 (MPEG audio layer 2/3) (libavformat)
[mp3 @ 0x7f7b7e07d760]max_analyze_duration 5000000 reached at 5015510 microseconds
[lavf] stream 0: audio (mp3), -aid 0
Clip info:
title: teddy picker
artist: Arctic Monkeys
album: Favourite Worst Nightmare
track: 2
language: German
genre: Rock
encoded_by: LAME 3.97
date: 2007
Load subtitles in Music/Arctic Monkeys/Favourite Most Nightmare/
Selected audio codec: MPEG 1.0/2.0/2.5 layers I, II, III [mpg123]
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
AO: [pulse] Init failed: Connection refused
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 1.9 (01.8) of 163.2 (02:43.1) 1.6%
aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
speaker-test -c 2
speaker-test 1.0.27
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
1 - Front Right
Time per period = 5.651455
Last edited by Kotrfa (2013-04-23 15:32:42)Same for me after system upgrade on 2013-05-01:
pacmatic -Syu
Since then, no Audio output via HDMI anymore. Mainboard is Intel DH67BL.
Before upgrade, it worked. Audio via normal audio connector also still works.
$ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
But on the connected (via HDMI) TV is nothing to hear. Video on TV via HDMI works. Checked also alsamixer volume setting.
With this, I hear the sound on the speakers connected with the Mainboard:
$ aplay /usr/share/sounds/alsa/Front_Center.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC892 Analog [ALC892 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 1: ALC892 Digital [ALC892 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
$ lsmod | grep snd
snd_hda_codec_hdmi 24877 1
snd_hda_codec_realtek 53315 1
snd_hda_intel 28850 1
snd_hda_codec 87310 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 62851 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 6038 2 snd_pcm,snd_hda_intel
snd_timer 14846 1 snd_pcm
snd 44486 9 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
$ cat /proc/asound/modules
0 snd_hda_intel
I've read this, but did not help:
https://wiki.archlinux.org/index.php/Ta … chitecture
Here the list of upgraded packages:
grep 2013-05-01.*pgraded /var/log/pacman.log
http://pastebin.com/vXjp3Bw4
I also downgraded to the kernel version before upgrade:
pacman -U /var/cache/pacman/pkg/linux-3.7.4-1-i686.pkg.tar.xz
But that did not solve the problem. Also using linux-lts kernel did not help.
I have posted this also on the german Arch Linux board:
https://bbs.archlinux.de/viewtopic.php?id=23955
Last edited by 1970 (2013-05-06 05:23:59) -
Render Queue Question for After Effects CS5.5
What is the best render settings for my laptop amd-300 apu with radeon hd graphics 1.30 GHz that has 2.00 GB Ram (1.60GB Usable?) It's also 64 bit.
I am rendering some special effects with CC Mr. Mercury and CC Vector Blur. I tried using just the standard settings and it goes fine until it gets up to the CC Mr. Mercury and Vector Blur, then it slows the heck down and takes forever to finish.
In the Render Queue what type of settings should I use to make it go faster and still make the effects look good?
Thanks AdrianFYI, I have a zillion year old MacBook (plastic computer - remember those) that meets the minimum system requirements of an Intel processor and 2GB ram. It's old and runs CS6 just fine as long as I just do the basics and keep the preview resolution down to about 1/4. I would not try and render production work on that system because it's not up to the task and I'd never expect it to be a production machine. I do use it often when I don't want to drag an expensive machine around with me on my travels.
If you want a production machine you have to pay for it. I have a fully decked out new MBPro R that I use as my primary AE design machine but I still go to a desktop system for large projects that have to be produced on a deadline. If I were a hobbyist I'd live with what I could afford. Because I am a professional and I charge for my services I adjust my rates to pay for the gear that I need to do the job. It's simple economics. Most film makers I know have no idea of how to run a business. Most are starving most of the time. Only a few understand that doing what we talk about on this forum is either an expensive hobby or a business. If it's a business you have to learn how to run a business before you learn how to make a movie. If it's a hobby they you have to have the means to support it. It's no different than Skiing, biking, or building model airplanes. If you can't afford new gear you have to make do with what you've got. -
MDB and Database - Listener port stops working
Hi,
I have created an MDB which does the following when a message is received from the queue.
1. Store message in database
2. do some processing
At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?usmanchaudhry wrote:
Hi,
I have created an MDB which does the following when a message is received from the queue.
1. Store message in database
2. do some processing
At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?i believe you need an XA driver and a transaction manager, for starters.
a simple JDBC rollback won't do it.
which app server are you using?
which jms provider?
% -
I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed. -
A few seconds after start the GDM mouse stops working
After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
Edited: Mouse works. Only pointer does not move.
lscpi says:
00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
gdm says:
usb 2-2: new low speed USB device using uhci_hcd and address 4
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
(this line is repeated several times:)
[drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
[drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
[drm:i915_reset] *ERROR* Failed to reset chip.
/var/log/Xorg.0.log says:
[ 23.129]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 23.129]
X.Org X Server 1.9.3.901 (1.9.4 RC 1)
Release Date: 2011-01-07
[ 23.129] X Protocol Version 11, Revision 0
[ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
[ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
[ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
[ 23.129] Build Date: 08 January 2011 11:27:31PM
[ 23.129]
[ 23.130] Current version of pixman: 0.20.2
[ 23.130] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
[ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.206] (==) No Layout section. Using the first Screen section.
[ 23.206] (==) No screen section available. Using defaults.
[ 23.206] (**) |-->Screen "Default Screen Section" (0)
[ 23.206] (**) | |-->Monitor "<default monitor>"
[ 23.206] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.206] (==) Automatically adding devices
[ 23.206] (==) Automatically enabling devices
[ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.260] Entry deleted from font path.
[ 23.295] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.295] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.295] (II) Loader magic: 0x81f3160
[ 23.295] (II) Module ABI versions:
[ 23.295] X.Org ANSI C Emulation: 0.4
[ 23.295] X.Org Video Driver: 8.0
[ 23.295] X.Org XInput driver : 11.0
[ 23.295] X.Org Server Extension : 4.0
[ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
[ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23.296] (II) LoadModule: "extmod"
[ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.314] (II) Module extmod: vendor="X.Org Foundation"
[ 23.314] compiled for 1.9.3.901, module version = 1.0.0
[ 23.314] Module class: X.Org Server Extension
[ 23.314] ABI class: X.Org Server Extension, version 4.0
[ 23.314] (II) Loading extension MIT-SCREEN-SAVER
[ 23.314] (II) Loading extension XFree86-VidModeExtension
[ 23.314] (II) Loading extension XFree86-DGA
[ 23.314] (II) Loading extension DPMS
[ 23.314] (II) Loading extension XVideo
[ 23.314] (II) Loading extension XVideo-MotionCompensation
[ 23.314] (II) Loading extension X-Resource
[ 23.314] (II) LoadModule: "dbe"
[ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.320] (II) Module dbe: vendor="X.Org Foundation"
[ 23.320] compiled for 1.9.3.901, module version = 1.0.0
[ 23.320] Module class: X.Org Server Extension
[ 23.320] ABI class: X.Org Server Extension, version 4.0
[ 23.320] (II) Loading extension DOUBLE-BUFFER
[ 23.320] (II) LoadModule: "glx"
[ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.337] (II) Module glx: vendor="X.Org Foundation"
[ 23.337] compiled for 1.9.3.901, module version = 1.0.0
[ 23.337] ABI class: X.Org Server Extension, version 4.0
[ 23.337] (==) AIGLX enabled
[ 23.337] (II) Loading extension GLX
[ 23.337] (II) LoadModule: "record"
[ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.338] (II) Module record: vendor="X.Org Foundation"
[ 23.338] compiled for 1.9.3.901, module version = 1.13.0
[ 23.338] Module class: X.Org Server Extension
[ 23.338] ABI class: X.Org Server Extension, version 4.0
[ 23.339] (II) Loading extension RECORD
[ 23.339] (II) LoadModule: "dri"
[ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.347] (II) Module dri: vendor="X.Org Foundation"
[ 23.347] compiled for 1.9.3.901, module version = 1.0.0
[ 23.347] ABI class: X.Org Server Extension, version 4.0
[ 23.347] (II) Loading extension XFree86-DRI
[ 23.347] (II) LoadModule: "dri2"
[ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.351] (II) Module dri2: vendor="X.Org Foundation"
[ 23.351] compiled for 1.9.3.901, module version = 1.2.0
[ 23.351] ABI class: X.Org Server Extension, version 4.0
[ 23.351] (II) Loading extension DRI2
[ 23.351] (==) Matched intel as autoconfigured driver 0
[ 23.351] (==) Matched vesa as autoconfigured driver 1
[ 23.351] (==) Matched fbdev as autoconfigured driver 2
[ 23.351] (==) Assigned the driver to the xf86ConfigLayout
[ 23.351] (II) LoadModule: "intel"
[ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.408] (II) Module intel: vendor="X.Org Foundation"
[ 23.408] compiled for 1.9.3, module version = 2.14.0
[ 23.408] Module class: X.Org Video Driver
[ 23.408] ABI class: X.Org Video Driver, version 8.0
[ 23.408] (II) LoadModule: "vesa"
[ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.414] (II) Module vesa: vendor="X.Org Foundation"
[ 23.414] compiled for 1.9.0, module version = 2.3.0
[ 23.414] Module class: X.Org Video Driver
[ 23.414] ABI class: X.Org Video Driver, version 8.0
[ 23.414] (II) LoadModule: "fbdev"
[ 23.425] (WW) Warning, couldn't open module fbdev
[ 23.425] (II) UnloadModule: "fbdev"
[ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 23.426] (II) VESA: driver for VESA chipsets: vesa
[ 23.426] (++) using VT number 7
[ 23.435] (WW) Falling back to old probe method for vesa
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 8, (OK)
[ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 8, (OK)
[ 23.435] drmOpenByBusid: drmOpenMinor returns 8
[ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.435] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.435] (==) intel(0): RGB weight 888
[ 23.435] (==) intel(0): Default visual is TrueColor
[ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
[ 23.436] (--) intel(0): Chipset: "946GZ"
[ 23.436] (**) intel(0): Tiling enabled
[ 23.436] (**) intel(0): SwapBuffers wait enabled
[ 23.436] (==) intel(0): video overlay key set to 0x101fe
[ 23.520] (II) intel(0): Output VGA1 has no monitor section
[ 23.587] (II) intel(0): EDID for output VGA1
[ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
[ 23.587] (II) intel(0): Year: 2010 Week: 1
[ 23.587] (II) intel(0): EDID Version: 1.3
[ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
[ 23.587] (II) intel(0): Gamma: 2.20
[ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 23.587] (II) intel(0): First detailed timing is preferred mode
[ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
[ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 23.587] (II) intel(0): Supported established timings:
[ 23.587] (II) intel(0): 720x400@70Hz
[ 23.587] (II) intel(0): 640x480@60Hz
[ 23.587] (II) intel(0): 640x480@67Hz
[ 23.587] (II) intel(0): 640x480@72Hz
[ 23.587] (II) intel(0): 640x480@75Hz
[ 23.587] (II) intel(0): 800x600@56Hz
[ 23.587] (II) intel(0): 800x600@60Hz
[ 23.587] (II) intel(0): 800x600@72Hz
[ 23.587] (II) intel(0): 800x600@75Hz
[ 23.587] (II) intel(0): 832x624@75Hz
[ 23.587] (II) intel(0): 1024x768@60Hz
[ 23.587] (II) intel(0): 1024x768@70Hz
[ 23.587] (II) intel(0): 1024x768@75Hz
[ 23.587] (II) intel(0): 1280x1024@75Hz
[ 23.587] (II) intel(0): 1152x864@75Hz
[ 23.587] (II) intel(0): Manufacturer's mask: 0
[ 23.587] (II) intel(0): Supported standard timings:
[ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 23.588] (II) intel(0): Supported detailed timing:
[ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
[ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 23.588] (II) intel(0): Monitor name: SyncMaster
[ 23.588] (II) intel(0): Serial No: HMFZ102588
[ 23.588] (II) intel(0): EDID (in hex):
[ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
[ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
[ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
[ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
[ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
[ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
[ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
[ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
[ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 23.613] (II) intel(0): Using EDID range info for horizontal sync
[ 23.613] (II) intel(0): Using EDID range info for vertical refresh
[ 23.613] (II) intel(0): Printing DDC gathered Modelines:
[ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 23.614] (II) intel(0): Printing probed modes for output VGA1
[ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.614] (II) intel(0): Output VGA1 connected
[ 23.614] (II) intel(0): Using exact sizes for initial modes
[ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
[ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
[ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
[ 23.614] (**) intel(0): DPI set to (96, 88)
[ 23.614] (II) Loading sub module "fb"
[ 23.614] (II) LoadModule: "fb"
[ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.628] (II) Module fb: vendor="X.Org Foundation"
[ 23.629] compiled for 1.9.3.901, module version = 1.0.0
[ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.629] (II) UnloadModule: "vesa"
[ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.629] (==) Depth 24 pixmap format is 32 bpp
[ 23.629] (==) intel(0): VideoRam: 262144 KB
[ 23.629] (II) intel(0): [DRI2] Setup complete
[ 23.629] (II) intel(0): [DRI2] DRI driver: i915
[ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 23.656] (II) UXA(0): Driver registered support for the following operations:
[ 23.656] (II) solid
[ 23.656] (II) copy
[ 23.656] (II) composite (RENDER acceleration)
[ 23.656] (II) put_image
[ 23.656] (II) get_image
[ 23.656] (==) intel(0): Backing store disabled
[ 23.656] (==) intel(0): Silken mouse enabled
[ 23.658] (II) intel(0): Initializing HW Cursor
[ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.673] (==) intel(0): DPMS enabled
[ 23.673] (==) intel(0): Intel XvMC decoder disabled
[ 23.673] (II) intel(0): Set up textured video
[ 23.673] (II) intel(0): Set up overlay video
[ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.673] (==) intel(0): hotplug detection: "enabled"
[ 23.674] (--) RandR disabled
[ 23.674] (II) Initializing built-in extension Generic Event Extension
[ 23.674] (II) Initializing built-in extension SHAPE
[ 23.674] (II) Initializing built-in extension MIT-SHM
[ 23.674] (II) Initializing built-in extension XInputExtension
[ 23.674] (II) Initializing built-in extension XTEST
[ 23.674] (II) Initializing built-in extension BIG-REQUESTS
[ 23.674] (II) Initializing built-in extension SYNC
[ 23.674] (II) Initializing built-in extension XKEYBOARD
[ 23.674] (II) Initializing built-in extension XC-MISC
[ 23.674] (II) Initializing built-in extension SECURITY
[ 23.674] (II) Initializing built-in extension XINERAMA
[ 23.674] (II) Initializing built-in extension XFIXES
[ 23.674] (II) Initializing built-in extension RENDER
[ 23.674] (II) Initializing built-in extension RANDR
[ 23.674] (II) Initializing built-in extension COMPOSITE
[ 23.674] (II) Initializing built-in extension DAMAGE
[ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
[ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.316] (II) LoadModule: "evdev"
[ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.334] (II) Module evdev: vendor="X.Org Foundation"
[ 24.334] compiled for 1.9.0, module version = 2.5.0
[ 24.334] Module class: X.Org XInput Driver
[ 24.334] ABI class: X.Org XInput driver, version 11.0
[ 24.334] (**) Power Button: always reports core events
[ 24.334] (**) Power Button: Device: "/dev/input/event1"
[ 24.340] (--) Power Button: Found keys
[ 24.340] (II) Power Button: Configuring as keyboard
[ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.340] (**) Option "xkb_rules" "evdev"
[ 24.340] (**) Option "xkb_model" "evdev"
[ 24.340] (**) Option "xkb_layout" "us"
[ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.380] (**) Power Button: always reports core events
[ 24.380] (**) Power Button: Device: "/dev/input/event0"
[ 24.386] (--) Power Button: Found keys
[ 24.386] (II) Power Button: Configuring as keyboard
[ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.386] (**) Option "xkb_rules" "evdev"
[ 24.386] (**) Option "xkb_model" "evdev"
[ 24.386] (**) Option "xkb_layout" "us"
[ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 24.394] (II) No input driver/identifier specified (ignoring)
[ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
[ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
[ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
[ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
[ 24.403] (**) Option "xkb_rules" "evdev"
[ 24.403] (**) Option "xkb_model" "evdev"
[ 24.403] (**) Option "xkb_layout" "us"
[ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 24.411] (II) No input driver/identifier specified (ignoring)
[ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.182] (II) intel(0): Using hsync ranges from config file
[ 27.182] (II) intel(0): Using vrefresh ranges from config file
[ 27.182] (II) intel(0): Printing DDC gathered Modelines:
[ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.256] (II) intel(0): Using hsync ranges from config file
[ 27.256] (II) intel(0): Using vrefresh ranges from config file
[ 27.256] (II) intel(0): Printing DDC gathered Modelines:
[ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.363] (II) intel(0): Using hsync ranges from config file
[ 27.364] (II) intel(0): Using vrefresh ranges from config file
[ 27.364] (II) intel(0): Printing DDC gathered Modelines:
[ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.433] (II) intel(0): Using hsync ranges from config file
[ 27.433] (II) intel(0): Using vrefresh ranges from config file
[ 27.433] (II) intel(0): Printing DDC gathered Modelines:
[ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.057] (EE) intel(0): failed to set cursor: Input/output error
[ 39.057] (EE) intel(0): failed to set cursor: Input/output error
[ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.255] (EE) intel(0): failed to set cursor: Input/output error
[ 39.255] (EE) intel(0): failed to set cursor: Input/output error
[ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 42.522] (EE) intel(0): failed to set cursor: Input/output error
[ 42.522] (EE) intel(0): failed to set cursor: Input/output error
[ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 42.695] (EE) intel(0): failed to set cursor: Input/output error
[ 42.695] (EE) intel(0): failed to set cursor: Input/output error
[ 45.970] (EE) intel(0): failed to set cursor: Input/output error
[ 45.970] (EE) intel(0): failed to set cursor: Input/output error
[ 46.957] (EE) intel(0): failed to set cursor: Input/output error
[ 46.957] (EE) intel(0): failed to set cursor: Input/output error
[ 53.971] (EE) intel(0): failed to set cursor: Input/output error
[ 53.971] (EE) intel(0): failed to set cursor: Input/output error
[ 54.206] (EE) intel(0): failed to set cursor: Input/output error
[ 54.206] (EE) intel(0): failed to set cursor: Input/output error
[ 54.804] (EE) intel(0): failed to set cursor: Input/output error
[ 54.804] (EE) intel(0): failed to set cursor: Input/output error
[ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 72.861] (**) USB Optical Mouse: always reports core events
[ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
[ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
[ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
[ 72.866] (--) USB Optical Mouse: Found relative axes
[ 72.866] (--) USB Optical Mouse: Found x and y relative axes
[ 72.866] (II) USB Optical Mouse: Configuring as mouse
[ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 72.867] (II) USB Optical Mouse: initialized for relative axes.
[ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 72.868] (II) No input driver/identifier specified (ignoring)
[ 84.484] (EE) intel(0): failed to set cursor: Input/output error
[ 84.484] (EE) intel(0): failed to set cursor: Input/output error
[ 136.555] (EE) intel(0): failed to set cursor: Input/output error
[ 136.555] (EE) intel(0): failed to set cursor: Input/output error
[ 163.561] (EE) intel(0): failed to set cursor: Input/output error
[ 163.561] (EE) intel(0): failed to set cursor: Input/output error
[ 176.751] (EE) intel(0): failed to set cursor: Input/output error
[ 176.752] (EE) intel(0): failed to set cursor: Input/output error
[ 179.565] (EE) intel(0): failed to set cursor: Input/output error
[ 179.565] (EE) intel(0): failed to set cursor: Input/output error
[ 179.613] (EE) intel(0): failed to set cursor: Input/output error
[ 179.613] (EE) intel(0): failed to set cursor: Input/output error
[ 190.939] (EE) intel(0): failed to set cursor: Input/output error
[ 190.939] (EE) intel(0): failed to set cursor: Input/output error
[ 196.719] (EE) intel(0): failed to set cursor: Input/output error
[ 196.719] (EE) intel(0): failed to set cursor: Input/output error
[ 197.007] (EE) intel(0): failed to set cursor: Input/output error
[ 197.007] (EE) intel(0): failed to set cursor: Input/output error
[ 200.991] (EE) intel(0): failed to set cursor: Input/output error
[ 200.991] (EE) intel(0): failed to set cursor: Input/output error
[ 202.499] (EE) intel(0): failed to set cursor: Input/output error
[ 202.499] (EE) intel(0): failed to set cursor: Input/output error
[ 203.164] (EE) intel(0): failed to set cursor: Input/output error
[ 203.164] (EE) intel(0): failed to set cursor: Input/output error
[ 207.322] (EE) intel(0): failed to set cursor: Input/output error
[ 207.323] (EE) intel(0): failed to set cursor: Input/output error
[ 208.093] (EE) intel(0): failed to set cursor: Input/output error
[ 208.094] (EE) intel(0): failed to set cursor: Input/output error
[ 209.080] (EE) intel(0): failed to set cursor: Input/output error
[ 209.081] (EE) intel(0): failed to set cursor: Input/output error
[ 209.641] (EE) intel(0): failed to set cursor: Input/output error
[ 209.642] (EE) intel(0): failed to set cursor: Input/output error
[ 214.392] (EE) intel(0): failed to set cursor: Input/output error
[ 214.392] (EE) intel(0): failed to set cursor: Input/output error
[ 214.885] (EE) intel(0): failed to set cursor: Input/output error
[ 214.885] (EE) intel(0): failed to set cursor: Input/output error
[ 225.899] (EE) intel(0): failed to set cursor: Input/output error
[ 225.899] (EE) intel(0): failed to set cursor: Input/output error
[ 225.912] (EE) intel(0): failed to set cursor: Input/output error
[ 225.913] (EE) intel(0): failed to set cursor: Input/output error
[ 244.351] (EE) intel(0): failed to set cursor: Input/output error
[ 244.351] (EE) intel(0): failed to set cursor: Input/output error
[ 245.332] (EE) intel(0): failed to set cursor: Input/output error
[ 245.332] (EE) intel(0): failed to set cursor: Input/output error
[ 248.711] (EE) intel(0): failed to set cursor: Input/output error
[ 248.712] (EE) intel(0): failed to set cursor: Input/output error
[ 249.347] (EE) intel(0): failed to set cursor: Input/output error
[ 249.348] (EE) intel(0): failed to set cursor: Input/output error
[ 252.594] (EE) intel(0): failed to set cursor: Input/output error
[ 252.594] (EE) intel(0): failed to set cursor: Input/output error
[ 253.062] (EE) intel(0): failed to set cursor: Input/output error
[ 253.062] (EE) intel(0): failed to set cursor: Input/output error
[ 273.635] (EE) intel(0): failed to set cursor: Input/output error
[ 273.635] (EE) intel(0): failed to set cursor: Input/output error
[ 274.148] (EE) intel(0): failed to set cursor: Input/output error
[ 274.148] (EE) intel(0): failed to set cursor: Input/output error
[ 285.208] (EE) intel(0): failed to set cursor: Input/output error
[ 285.208] (EE) intel(0): failed to set cursor: Input/output error
[ 287.473] (EE) intel(0): failed to set cursor: Input/output error
[ 287.473] (EE) intel(0): failed to set cursor: Input/output error
[ 353.216] (EE) intel(0): failed to set cursor: Input/output error
[ 353.216] (EE) intel(0): failed to set cursor: Input/output error
[ 355.928] (EE) intel(0): failed to set cursor: Input/output error
[ 355.928] (EE) intel(0): failed to set cursor: Input/output error
[ 357.845] (EE) intel(0): failed to set cursor: Input/output error
[ 357.845] (EE) intel(0): failed to set cursor: Input/output error
[ 360.465] (EE) intel(0): failed to set cursor: Input/output error
[ 360.465] (EE) intel(0): failed to set cursor: Input/output error
[ 361.916] (EE) intel(0): failed to set cursor: Input/output error
[ 361.917] (EE) intel(0): failed to set cursor: Input/output error
[ 363.505] (EE) intel(0): failed to set cursor: Input/output error
[ 363.505] (EE) intel(0): failed to set cursor: Input/output error
[ 364.433] (EE) intel(0): failed to set cursor: Input/output error
[ 364.433] (EE) intel(0): failed to set cursor: Input/output error
[ 366.375] (EE) intel(0): failed to set cursor: Input/output error
[ 366.375] (EE) intel(0): failed to set cursor: Input/output error
[ 367.953] (EE) intel(0): failed to set cursor: Input/output error
[ 367.954] (EE) intel(0): failed to set cursor: Input/output error
[ 369.092] (EE) intel(0): failed to set cursor: Input/output error
[ 369.092] (EE) intel(0): failed to set cursor: Input/output error
[ 372.906] (EE) intel(0): failed to set cursor: Input/output error
[ 372.906] (EE) intel(0): failed to set cursor: Input/output error
[ 374.450] (EE) intel(0): failed to set cursor: Input/output error
[ 374.451] (EE) intel(0): failed to set cursor: Input/output error
[ 376.802] (EE) intel(0): failed to set cursor: Input/output error
[ 376.803] (EE) intel(0): failed to set cursor: Input/output error
[ 378.140] (EE) intel(0): failed to set cursor: Input/output error
[ 378.140] (EE) intel(0): failed to set cursor: Input/output error
[ 382.347] (EE) intel(0): failed to set cursor: Input/output error
[ 382.347] (EE) intel(0): failed to set cursor: Input/output error
[ 383.812] (EE) intel(0): failed to set cursor: Input/output error
[ 383.812] (EE) intel(0): failed to set cursor: Input/output error
[ 386.612] (EE) intel(0): failed to set cursor: Input/output error
[ 386.612] (EE) intel(0): failed to set cursor: Input/output error
[ 388.092] (EE) intel(0): failed to set cursor: Input/output error
[ 388.092] (EE) intel(0): failed to set cursor: Input/output error
[ 389.436] (EE) intel(0): failed to set cursor: Input/output error
[ 389.436] (EE) intel(0): failed to set cursor: Input/output error
[ 391.131] (EE) intel(0): failed to set cursor: Input/output error
[ 391.131] (EE) intel(0): failed to set cursor: Input/output error
[ 392.372] (EE) intel(0): failed to set cursor: Input/output error
[ 392.373] (EE) intel(0): failed to set cursor: Input/output error
[ 393.630] (EE) intel(0): failed to set cursor: Input/output error
[ 393.631] (EE) intel(0): failed to set cursor: Input/output error
[ 394.932] (EE) intel(0): failed to set cursor: Input/output error
[ 394.933] (EE) intel(0): failed to set cursor: Input/output error
[ 396.629] (EE) intel(0): failed to set cursor: Input/output error
[ 396.629] (EE) intel(0): failed to set cursor: Input/output error
[ 398.349] (EE) intel(0): failed to set cursor: Input/output error
[ 398.349] (EE) intel(0): failed to set cursor: Input/output error
[ 400.264] (EE) intel(0): failed to set cursor: Input/output error
[ 400.264] (EE) intel(0): failed to set cursor: Input/output error
[ 402.517] (EE) intel(0): failed to set cursor: Input/output error
[ 402.518] (EE) intel(0): failed to set cursor: Input/output error
[ 404.749] (EE) intel(0): failed to set cursor: Input/output error
[ 404.749] (EE) intel(0): failed to set cursor: Input/output error
[ 407.798] (EE) intel(0): failed to set cursor: Input/output error
[ 407.798] (EE) intel(0): failed to set cursor: Input/output error
[ 411.170] (EE) intel(0): failed to set cursor: Input/output error
[ 411.170] (EE) intel(0): failed to set cursor: Input/output error
[ 411.910] (EE) intel(0): failed to set cursor: Input/output error
[ 411.912] (EE) intel(0): failed to set cursor: Input/output error
[ 413.276] (EE) intel(0): failed to set cursor: Input/output error
[ 413.276] (EE) intel(0): failed to set cursor: Input/output error
[ 414.775] (EE) intel(0): failed to set cursor: Input/output error
[ 414.775] (EE) intel(0): failed to set cursor: Input/output error
[ 416.762] (EE) intel(0): failed to set cursor: Input/output error
[ 416.763] (EE) intel(0): failed to set cursor: Input/output error
[ 420.439] (EE) intel(0): failed to set cursor: Input/output error
[ 420.440] (EE) intel(0): failed to set cursor: Input/output error
[ 424.614] (EE) intel(0): failed to set cursor: Input/output error
[ 424.614] (EE) intel(0): failed to set cursor: Input/output error
[ 426.920] (EE) intel(0): failed to set cursor: Input/output error
[ 426.920] (EE) intel(0): failed to set cursor: Input/output error
[ 430.033] (EE) intel(0): failed to set cursor: Input/output error
[ 430.033] (EE) intel(0): failed to set cursor: Input/output error
[ 432.265] (EE) intel(0): failed to set cursor: Input/output error
[ 432.265] (EE) intel(0): failed to set cursor: Input/output error
[ 435.339] (EE) intel(0): failed to set cursor: Input/output error
[ 435.339] (EE) intel(0): failed to set cursor: Input/output error
[ 437.705] (EE) intel(0): failed to set cursor: Input/output error
[ 437.706] (EE) intel(0): failed to set cursor: Input/output error
[ 441.112] (EE) intel(0): failed to set cursor: Input/output error
[ 441.112] (EE) intel(0): failed to set cursor: Input/output error
[ 444.922] (EE) intel(0): failed to set cursor: Input/output error
[ 444.922] (EE) intel(0): failed to set cursor: Input/output error
[ 448.296] (EE) intel(0): failed to set cursor: Input/output error
[ 448.296] (EE) intel(0): failed to set cursor: Input/output error
[ 450.299] (EE) intel(0): failed to set cursor: Input/output error
[ 450.299] (EE) intel(0): failed to set cursor: Input/output error
[ 453.190] (EE) intel(0): failed to set cursor: Input/output error
[ 453.191] (EE) intel(0): failed to set cursor: Input/output error
[ 455.467] (EE) intel(0): failed to set cursor: Input/output error
[ 455.468] (EE) intel(0): failed to set cursor: Input/output error
[ 458.751] (EE) intel(0): failed to set cursor: Input/output error
[ 458.751] (EE) intel(0): failed to set cursor: Input/output error
[ 460.132] (EE) intel(0): failed to set cursor: Input/output error
[ 460.132] (EE) intel(0): failed to set cursor: Input/output error
[ 462.768] (EE) intel(0): failed to set cursor: Input/output error
[ 462.770] (EE) intel(0): failed to set cursor: Input/output error
[ 464.061] (EE) intel(0): failed to set cursor: Input/output error
[ 464.061] (EE) intel(0): failed to set cursor: Input/output error
[ 467.064] (EE) intel(0): failed to set cursor: Input/output error
[ 467.064] (EE) intel(0): failed to set cursor: Input/output error
[ 469.637] (EE) intel(0): failed to set cursor: Input/output error
[ 469.637] (EE) intel(0): failed to set cursor: Input/output error
[ 472.446] (EE) intel(0): failed to set cursor: Input/output error
[ 472.447] (EE) intel(0): failed to set cursor: Input/output error
[ 475.654] (EE) intel(0): failed to set cursor: Input/output error
[ 475.654] (EE) intel(0): failed to set cursor: Input/output error
[ 477.849] (EE) intel(0): failed to set cursor: Input/output error
[ 477.852] (EE) intel(0): failed to set cursor: Input/output error
[ 481.102] (EE) intel(0): failed to set cursor: Input/output error
[ 481.102] (EE) intel(0): failed to set cursor: Input/output error
[ 483.658] (EE) intel(0): failed to set cursor: Input/output error
[ 483.658] (EE) intel(0): failed to set cursor: Input/output error
[ 486.239] (EE) intel(0): failed to set cursor: Input/output error
[ 486.239] (EE) intel(0): failed to set cursor: Input/output error
[ 489.082] (EE) intel(0): failed to set cursor: Input/output error
[ 489.083] (EE) intel(0): failed to set cursor: Input/output error
[ 491.279] (EE) intel(0): failed to set cursor: Input/output error
[ 491.280] (EE) intel(0): failed to set cursor: Input/output error
[ 494.315] (EE) intel(0): failed to set cursor: Input/output error
[ 494.315] (EE) intel(0): failed to set cursor: Input/output error
[ 495.905] (EE) intel(0): failed to set cursor: Input/output error
[ 495.905] (EE) intel(0): failed to set cursor: Input/output error
[ 498.171] (EE) intel(0): failed to set cursor: Input/output error
[ 498.172] (EE) intel(0): failed to set cursor: Input/output error
[ 499.312] (EE) intel(0): failed to set cursor: Input/output error
[ 499.313] (EE) intel(0): failed to set cursor: Input/output error
[ 501.813] (EE) intel(0): failed to set cursor: Input/output error
[ 501.813] (EE) intel(0): failed to set cursor: Input/output error
[ 502.817] (EE) intel(0): failed to set cursor: Input/output error
[ 502.817] (EE) intel(0): failed to set cursor: Input/output error
[ 507.125] (EE) intel(0): failed to set cursor: Input/output error
[ 507.125] (EE) intel(0): failed to set cursor: Input/output error
[ 508.209] (EE) intel(0): failed to set cursor: Input/output error
[ 508.210] (EE) intel(0): failed to set cursor: Input/output error
[ 540.521] (EE) intel(0): failed to set cursor: Input/output error
[ 540.526] (EE) intel(0): failed to set cursor: Input/output error
[ 541.621] (EE) intel(0): failed to set cursor: Input/output error
[ 541.621] (EE) intel(0): failed to set cursor: Input/output error
[ 552.597] (EE) intel(0): failed to set cursor: Input/output error
[ 552.597] (EE) intel(0): failed to set cursor: Input/output error
[ 553.470] (EE) intel(0): failed to set cursor: Input/output error
[ 553.471] (EE) intel(0): failed to set cursor: Input/output error
[ 554.186] (EE) intel(0): failed to set cursor: Input/output error
[ 554.186] (EE) intel(0): failed to set cursor: Input/output error
[ 555.103] (EE) intel(0): failed to set cursor: Input/output error
[ 555.103] (EE) intel(0): failed to set cursor: Input/output error
[ 690.143] (EE) intel(0): failed to set cursor: Input/output error
[ 690.143] (EE) intel(0): failed to set cursor: Input/output error
[ 690.263] (EE) intel(0): failed to set cursor: Input/output error
[ 690.263] (EE) intel(0): failed to set cursor: Input/output error
[ 690.333] (EE) intel(0): failed to set cursor: Input/output error
[ 690.333] (EE) intel(0): failed to set cursor: Input/output error
[ 690.557] (EE) intel(0): failed to set cursor: Input/output error
[ 690.557] (EE) intel(0): failed to set cursor: Input/output error
[ 690.591] (EE) intel(0): failed to set cursor: Input/output error
[ 690.591] (EE) intel(0): failed to set cursor: Input/output error
[ 690.606] (EE) intel(0): failed to set cursor: Input/output error
[ 690.607] (EE) intel(0): failed to set cursor: Input/output error
[ 691.055] (EE) intel(0): failed to set cursor: Input/output error
[ 691.055] (EE) intel(0): failed to set cursor: Input/output error
[ 691.070] (EE) intel(0): failed to set cursor: Input/output error
[ 691.071] (EE) intel(0): failed to set cursor: Input/output error
[ 755.300] (EE) intel(0): failed to set cursor: Input/output error
[ 755.300] (EE) intel(0): failed to set cursor: Input/output error
[ 755.444] (EE) intel(0): failed to set cursor: Input/output error
[ 755.444] (EE) intel(0): failed to set cursor: Input/output error
[ 765.910] (EE) intel(0): failed to set cursor: Input/output error
[ 765.911] (EE) intel(0): failed to set cursor: Input/output error
[ 769.826] (EE) intel(0): failed to set cursor: Input/output error
[ 769.827] (EE) intel(0): failed to set cursor: Input/output error
[ 771.279] (EE) intel(0): failed to set cursor: Input/output error
[ 771.279] (EE) intel(0): failed to set cursor: Input/output error
[ 776.475] (EE) intel(0): failed to set cursor: Input/output error
[ 776.475] (EE) intel(0): failed to set cursor: Input/output error
[ 777.584] (EE) intel(0): failed to set cursor: Input/output error
[ 777.584] (EE) intel(0): failed to set cursor: Input/output error
[ 782.163] (EE) intel(0): failed to set cursor: Input/output error
[ 782.163] (EE) intel(0): failed to set cursor: Input/output error
[ 784.345] (EE) intel(0): failed to set cursor: Input/output error
[ 784.345] (EE) intel(0): failed to set cursor: Input/output error
[ 789.813] (EE) intel(0): failed to set cursor: Input/output error
[ 789.814] (EE) intel(0): failed to set cursor: Input/output error
[ 793.986] (EE) intel(0): failed to set cursor: Input/output error
[ 793.986] (EE) intel(0): failed to set cursor: Input/output error
[ 796.717] (EE) intel(0): failed to set cursor: Input/output error
[ 796.717] (EE) intel(0): failed to set cursor: Input/output error
[ 802.971] (EE) intel(0): failed to set cursor: Input/output error
[ 802.971] (EE) intel(0): failed to set cursor: Input/output error
[ 805.567] (EE) intel(0): failed to set cursor: Input/output error
[ 805.568] (EE) intel(0): failed to set cursor: Input/output error
[ 807.811] (EE) intel(0): failed to set cursor: Input/output error
[ 807.811] (EE) intel(0): failed to set cursor: Input/output error
[ 814.410] (EE) intel(0): failed to set cursor: Input/output error
[ 814.410] (EE) intel(0): failed to set cursor: Input/output error
[ 815.460] (EE) intel(0): failed to set cursor: Input/output error
[ 815.460] (EE) intel(0): failed to set cursor: Input/output error
[ 818.800] (EE) intel(0): failed to set cursor: Input/output error
[ 818.800] (EE) intel(0): failed to set cursor: Input/output error
[ 821.589] (EE) intel(0): failed to set cursor: Input/output error
[ 821.589] (EE) intel(0): failed to set cursor: Input/output error
[ 825.657] (EE) intel(0): failed to set cursor: Input/output error
[ 825.657] (EE) intel(0): failed to set cursor: Input/output error
[ 828.078] (EE) intel(0): failed to set cursor: Input/output error
[ 828.078] (EE) intel(0): failed to set cursor: Input/output error
[ 831.833] (EE) intel(0): failed to set cursor: Input/output error
[ 831.834] (EE) intel(0): failed to set cursor: Input/output error
[ 833.806] (EE) intel(0): failed to set cursor: Input/output error
[ 833.807] (EE) intel(0): failed to set cursor: Input/output error
[ 835.978] (EE) intel(0): failed to set cursor: Input/output error
[ 835.978] (EE) intel(0): failed to set cursor: Input/output error
[ 840.143] (EE) intel(0): failed to set cursor: Input/output error
[ 840.143] (EE) intel(0): failed to set cursor: Input/output error
[ 854.335] (EE) intel(0): failed to set cursor: Input/output error
[ 854.335] (EE) intel(0): failed to set cursor: Input/output error
[ 855.471] (EE) intel(0): failed to set cursor: Input/output error
[ 855.471] (EE) intel(0): failed to set cursor: Input/output error
[ 867.428] (EE) intel(0): failed to set cursor: Input/output error
[ 867.429] (EE) intel(0): failed to set cursor: Input/output error
[ 870.354] (EE) intel(0): failed to set cursor: Input/output error
[ 870.355] (EE) intel(0): failed to set cursor: Input/output error
[ 873.062] (EE) intel(0): failed to set cursor: Input/output error
[ 873.062] (EE) intel(0): failed to set cursor: Input/output error
[ 873.955] (EE) intel(0): failed to set cursor: Input/output error
[ 873.955] (EE) intel(0): failed to set cursor: Input/output error
[ 877.131] (EE) intel(0): failed to set cursor: Input/output error
[ 877.132] (EE) intel(0): failed to set cursor: Input/output error
[ 878.020] (EE) intel(0): failed to set cursor: Input/output error
[ 878.021] (EE) intel(0): failed to set cursor: Input/output error
[ 880.499] (EE) intel(0): failed to set cursor: Input/output error
[ 880.499] (EE) intel(0): failed to set cursor: Input/output error
[ 881.708] (EE) intel(0): failed to set cursor: Input/output error
[ 881.708] (EE) intel(0): failed to set cursor: Input/output error
[ 884.711] (EE) intel(0): failed to set cursor: Input/output error
[ 884.711] (EE) intel(0): failed to set cursor: Input/output error
[ 893.533] (EE) intel(0): failed to set cursor: Input/output error
[ 893.533] (EE) intel(0): failed to set cursor: Input/output error
[ 896.537] (EE) intel(0): failed to set cursor: Input/output error
[ 896.537] (EE) intel(0): failed to set cursor: Input/output error
[ 898.029] (EE) intel(0): failed to set cursor: Input/output error
[ 898.030] (EE) intel(0): failed to set cursor: Input/output error
[ 901.447] (EE) intel(0): failed to set cursor: Input/output error
[ 901.447] (EE) intel(0): failed to set cursor: Input/output error
[ 902.670] (EE) intel(0): failed to set cursor: Input/output error
[ 902.670] (EE) intel(0): failed to set cursor: Input/output error
[ 907.266] (EE) intel(0): failed to set cursor: Input/output error
[ 907.267] (EE) intel(0): failed to set cursor: Input/output error
[ 908.415] (EE) intel(0): failed to set cursor: Input/output error
[ 908.415] (EE) intel(0): failed to set cursor: Input/output error
[ 911.083] (EE) intel(0): failed to set cursor: Input/output error
[ 911.083] (EE) intel(0): failed to set cursor: Input/output error
[ 912.335] (EE) intel(0): failed to set cursor: Input/output error
[ 912.335] (EE) intel(0): failed to set cursor: Input/output error
[ 914.699] (EE) intel(0): failed to set cursor: Input/output error
[ 914.699] (EE) intel(0): failed to set cursor: Input/output error
[ 915.519] (EE) intel(0): failed to set cursor: Input/output error
[ 915.520] (EE) intel(0): failed to set cursor: Input/output error
[ 921.179] (EE) intel(0): failed to set cursor: Input/output error
[ 921.180] (EE) intel(0): failed to set cursor: Input/output error
[ 923.296] (EE) intel(0): failed to set cursor: Input/output error
[ 923.297] (EE) intel(0): failed to set cursor: Input/output error
[ 926.020] (EE) intel(0): failed to set cursor: Input/output error
[ 926.021] (EE) intel(0): failed to set cursor: Input/output error
[ 926.881] (EE) intel(0): failed to set cursor: Input/output error
[ 926.881] (EE) intel(0): failed to set cursor: Input/output error
[ 930.252] (EE) intel(0): failed to set cursor: Input/output error
[ 930.252] (EE) intel(0): failed to set cursor: Input/output error
[ 931.105] (EE) intel(0): failed to set cursor: Input/output error
[ 931.105] (EE) intel(0): failed to set cursor: Input/output error
[ 938.375] (EE) intel(0): failed to set cursor: Input/output error
[ 938.376] (EE) intel(0): failed to set cursor: Input/output error
[ 951.395] (EE) intel(0): failed to set cursor: Input/output error
[ 951.396] (EE) intel(0): failed to set cursor: Input/output error
[ 997.695] (EE) intel(0): failed to set cursor: Input/output error
[ 997.695] (EE) intel(0): failed to set cursor: Input/output error
[ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
[ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
[ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
[ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
[ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
[ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
[ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
[ 1061.964] (EE) intel(0): failed to set cursor: Input/outpuI have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.
-
PLEASE HELP!!! My 'Apple mobile device helper has stopped working'!
Today i bought the new 3G iPhone so i went online to download the new 7.7 iTunes software. Now when i go into my iTunes a Windows pop up appears telling me that my 'Apple mobile device helper has stopped working' and that it is diagnosing the problem. The thing is that it doesn't diagnose the problem, the same box just keeps popping up over and over again.
I am not very computer literate and have tried everything that i can think of but nothing has worked.
Please can someone help because i'm absolutely dying to use my new iPhone; i queued up from 6 am to get my hands on it! :0(I'm just a simple user. I don't know how to fix it any more than any of the other posters with this problem. I've looked around in control panel, done some poking and prodding with services and processes, and can't find a reasonable way to stop the messages without completely hosing up iTunes. I know the messages are annoying as ****, and nobody likes the idea, but sitting around and doing nothing is sometimes a whole lot better then doing something that makes it worse. See if you can find a document from Apple that tells you how to go back to the previous version of iTunes. I've seen that course of action mentioned several times for previous releases of iTunes upgrades, so the instructions for it must exist in another forum.
I just think, from the number of posts, that Apple is going to have to get a fix out pretty quickly, because this error pretty much shuts down their products on the Windows platform. They can't afford to let it go on for very long. -
After upgrading to 10.8.3 my Apple USB keyboard stops working after about 3 hours
Mac Pro 3,1
OS X 10.8.3 Server
32GB RAM
Apple USB Keyboard works fine after reboot (typing on it now), stops responding after about 3 hours.
I see nothing in Console that looks like the culprit. Here is everything around the last time it happened - between 11:28 and 11:30 they keyboard just stopped working. Unplugging and re-plugging doesn't bring it back. Changing USB ports doesn't bring it back. Rebooting is the only thing that seems to work. Bluetooth keyboard works before and after.
3/25/13 11:28:08.503 AM mdworker[4631]: Unable to talk to lsboxd
3/25/13 11:30:00.962 AM CalendarAgent[768]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1003 "A server with the specified hostname could not be found." UserInfo=0x7fb609cb7730 {NSUnderlyingError=0x7fb60f2d0ed0 "A server with the specified hostname could not be found.", NSErrorFailingURLStringKey=https://[email protected]/principals/__uids__/A8612C91-669B-4A4B-88 04-2AA518E4842B/, NSErrorFailingURLKey=https://[email protected]/principals/__uids__/A8612C91-669B-4A4B-88 04-2AA518E4842B/, AccountName=lovemac7.brumstead.private, CalDAVErrFromRefresh=YES, NSLocalizedDescription=A server with the specified hostname could not be found.}]
Anyone else seeing anything like this?
Everything worked fine in 10.8.2.Hey Doug,
Thanks for your post, and welcome to the Apple Support Communities.
I understand that your keyboard backlight is not working upon startup, the following may resolve your issue:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
After performing normal troubleshooting, these symptoms may indicate that an SMC reset may be necessary:
Lights
The keyboard backlight appears to behave incorrectly (on Mac computers that have this feature).
You may also want to reset your computer's PRAM:
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
Thanks,
Matt M.
Maybe you are looking for
-
Accessing Managed Bean Variables in Entity Impl Class
How can I access managed bean variables in the entity Impl class . While inserting a new record in DB , i want to set few entity properties values . The values of those properties are available in the managed bean . How can i access those values from
-
Hi, I want to know if a parameter ID of "export/import to memory" instruction is available in two differents session with different user's login? tks Carlos
-
Tutorials Dreamweaver 8 and CS3
Looking for a tutorial on Dreamweaver CS3? Here is an extensive instructional site. Hours and hours on CSS, for instance. Costs $25 per month, but you can cancel at any time. You have your pick of instruction on all major software. www.lynda.com
-
I purchased Adobe Standard XI. It will not download due to my IE version 10
I am trying to download Adobe Standard XI. I am using IE version 10 but the error message says I cannot download to pre version 4 IE. I don't have pre version 4 IE.
-
I am new to the video world. I have a 25fps 1920x1080 ProRes 422 clip (made from a .mts file via ClipWrap) that needs to become 24fps. I assume that Compressor is the tool for this, but Compressor's interface is so unintuitive and fragmented that I w