Render settings for Blu-Ray in the UK

Hi all,
Bit of a newbie question regarding render settings for Blu-Ray. If I understand correctly, the uk frame rate is 25fps???? And we generally have 1080p TV's etc??? The Blu-ray presets in Media encoder don't offer this and the fact they don't makes me question if I'm not understanding the required settings correctly. ME does offer a 25fps preset but only in 1080i. So, my question is, what should I be rendering to, to then take the rendered file and author it to play on UK blu-ray players. Incidentaly, does anyone have any recommendations on authoring software. I just need to break it down into several seperate categories as well as being able to play the entire movie so the budget is minimal.
Many thanks for your help.
SJ

Hi, I'm using Mac Blu-rayRipper Pro and iMedia converter as well as Handbrake to get the highest quality transfer from my Blu-ray disks to iTunes and AppleTV. Each disk is a bit of a project as no two are the same in terms of the best method of conversion.
I've put a few details in my blog post on getting Blu-ray to work on my Mac Pro in the UK. Was a bit of an epic journey in the UK as we don't have all the options available in the USA:
http://www.theapplechap.com/TheAppleChap/Blog/Entries/2010/6/20Getting_the_most_out_of_Blu-ray_on_aMac.html
I also posted a short series of articles about getting the best possible movie conversion in iTunes covering subtitles, metadata and SD-HD tagging. May help so here's the link (to the first one, there are 3 in my blog):
http://www.theapplechap.com/TheAppleChap/Blog/Entries/2010/4/23Perfect_video_in_iTunes_-_Part_1Getting_great_rippedcontent.html
Best of luck
Alan

Similar Messages

How do I determine correct media encoder settings for Blu-Ray

I am successfully producing Hi Def Blu-Ray disks by using one of the presets available in Premiere media encoder. Actually using the HDTV 1080i 25 High Quality setting. They playback in beautiful high definition but I think I was just lucky. I would really like to know what determines the setting I should use.
1. I live in Australia so I assume PAL.
2. My camera is a Sony HDV. HCR HC9 1440 x 1080i. I assume this is irrelevant to export encoding settings for Blu-Ray.
3. The export encoder preset has field order set to Upper. I would have thought I should either match the project settings which is interlaced to match my camera and project. OR more likely I should match the audience TV which would be a widesceen plama or LCD TV. I dont know if these TVs are interlaced or progressive. OR is it more a question of what field order the Blu-Ray player expects me to send on the disk?
4. I will play on a TV 1920 x 1080 pixel capable and on slightly lower resoultion widescreens. The encoder preset is for 1920 x 1080 so I assume that's ok for all widescreen TVs even lower definition ones.
As you can tell I am a learner. Any suggested links to basic reading on the subject would help me.
Robert
PS Put this item in wrong forum previously.

Since no response I've been searching and found the following.
When encoding to make a Blu-Ray disk from my HDV 1080i footage:
1. Tell encoder the source is 1080i That is interlaced and it's TOP field first for HDV footage.
2. Tell it to encode to 1440 x 1080 resolution. You could tell it 1920 x 1080 but it will take much longer to encode. Will be good but why bother. All BD players will automatically up the 1440 to 1902 full screen.
3. Beware, not all players support BD-R and BD-RE recordable disks.
Seems Panasonic is good. Samsung probably good. Sony and Sharp probably not able to read (yet).
4. All players read MPEG-2 compression and H264 compression. Use a bit rate of 25 Mbps for MPEG-2 encode or 18 Mbps for equivalent result in H264 encode. Can use higher rates. These are minimums for a very good result
5. One pass encode is pretty damn good but use two pass if you have the time to wait for the encode.

Which H.264 settings for Blu ray with mixed assets

Hi,
I am still learning with the different options that I can chose in Encore for transcoding an asset but I am not sure what to chose.
I created a project in PP which uses the following formats 1080i/25,1080i/50, 720p/23,976 and 1080p/25.
the main scenes in PP is in 1080i/25. Most clips are documenting sports or moving objects.
If I use the automatic transcoding setting in Encore, it will be transcoded in 1080i/25 but is this really good? Although I am in a PAL region I think, for Blu Ray, I could also use NTSC settings like 1080p/25.
What shall I do?
Thanks

Hi,
I am still learning with the different options that I can chose in Encore for transcoding an asset but I am not sure what to chose.
I created a project in PP which uses the following formats 1080i/25,1080i/50, 720p/23,976 and 1080p/25.
the main scenes in PP is in 1080i/25. Most clips are documenting sports or moving objects.
If I use the automatic transcoding setting in Encore, it will be transcoded in 1080i/25 but is this really good? Although I am in a PAL region I think, for Blu Ray, I could also use NTSC settings like 1080p/25.
What shall I do?
Thanks

Best Compressor 3.5 Settings For Blu Ray Authoring in Roxio Toast

I want to export a 2 hour FCP7 project for eventual burning onto blu ray (BD-R DL) disk using Roxio Toast and I was wondering what are the settings in Compressor 3.5 to be able to achieve the absolute best quality file to take into Roxio?
As an aside, is Compressor even required for this or can I import the full res FCP7.mov file?
Thanks in advance!

I'm not sure about this, but you may only be able to use h.264 for video to make a blu-ray inside of Compressor.
I would suggest encoding in MPEG-2/AC3 in Compressor and then using Toast to author and burn.

Help with Connection Settings for Blu ray-to-Airport Express-to-TC?

I'm trying to use the network capability of my Sony Blu ray player and having no luck. I have the Blu ray connected via ethernet cable to the Airport Express, which in turn is connected wirelessly to my Time Capsule. The problem I'm having is horrendous because I'm so lame and no amount of forum or internet searching has helped.
The Blu ray network settings wants the following information:
IP Address
Subnet Mask
Default Gateway
DNS Server (Primary)
DNS Server (Secondary)
Do I get these settings from System Preferences>Network>AirPort>Advanced or do I get them from either the Airport Express or Time Capsule using AirPort Utility?
I tried giving the Blu ray player a static IP Address in Time Capsule using DHCP Reservations and the Blu ray's MAC Address, but that's not working either. Between the AirPort Express, Time Capsule, cable modem, and MacBook Air there are numbers everywhere and I just don't which set to use.

bluegrsss wrote:
I have tried most of the suggestions on these forums to get my Samsung connected to the airport express network but so far no luck. Anybody have success out there with step by step suggestions?
Are you trying to connect it to your AirPort Express wirelessly? (That's probably the case if your AirPort Express is your only Wi-Fi device, as its Ethernet port would be connected to your broadband modem.)
Is your AirPort Express "N"-capable? What type of encryption are you using on your network?
Have you installed the "supplied Wireless LAN Adapter"?
This manual
http://www.samsung.com/us/consumer/tv-video/home-theater/home-theater-systems/HT -BD3252T/XAA/index.idx?pagetype=prd_detail&tab=support
seems to have useful advice, particular starting on page 54.

Sorenson Squeeze H264 settings for blu-ray?

I'm trying to create a blu-ray in encore, and when importing an H264 using squeeze's blu-ray preset, encore wants to reencode. However, a blu-ray mpeg2 created from squeeze's presets works fine with encore. I'm not able to have Adobe Media Encoder installed on the computer that I am encoding from. Any advice? Here are the settings:
Mainconcept H.264
2pass vbr
1080i 29.97
25,000 Kbps
constrain at 30,000 Kbps
level 4.1
high AVC profile
interlaced
top field first
CABAC encoding entropy mode
key frames every 300 frames
auto key frame on scene change (50)
use b-pictures 3
use b-slices as reference (unchecked)
multiple slices (0)
reference frames (2)

My choices entropy encoding are either CABAC or CAVLC. I tried the various combinations of main/high and 2-pass/1-pass with CAVLC with no luck.
I downloaded MeGui but haven't had a chance to try it yet since it doesn't take quicktime reference files. My original media is coming from an Avid project, so I suppose I could export a DVCPRO HD quicktime (the media's original format) to test. Are there any settings in MeGui I need to be aware of or does it have a preset that is close enough to what I need?

*** FCP output settings for Blu-Ray?

I'm not sure if/how this is possible, but I'd like to export one of my HDV sequences and take it to a production house that can burn a Blu-Ray disc for me. Is it possible to do this using FCP/Compressor or should I wait until NAB for hopefully FCP 6?
If it's possible to export an HDV quality master can someone walk me through it? Would it work for them to use a file that I just export as a full-quality self-contained Quicktime movie?
Thanks in advance.

Talk to the production house of choice. Only they can tell you what they need. Hopefully for you it won't be HDV.

I purchased a blu-ray of The Hunger Games and it came with a code for a digital copy. I redeemed the code on iTunes but the download has been continuing for 2 weeks now and it never finishes! The time just keeps going up. Never an issue in the past.

I purchased the blu-ray of The Hunger Games and it came with a code to redeem for a digital copy. I redeemed the code in iTunes and the movie downloaded fine, but the "EXTRAS" have been downloading for 2 weeks! Everytime I launch iTunes it starts the download again and the counter keeps going UP, at one point it said it would take 3 weeks. I have paused and restarted the download, I have deleted the download, nothing works to finish or stop this download! Does anyone have a clue what's up?

ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

I recently authored a DVD. Is there a way to make it into a Blu Ray using the same project settings?

All my titles, menus, etc are in 720x480. I'm not sure how to upscale it.
I tried just exporting as a Blu Ray, and the quality is terrible, the video menus are all screwy. Also, I am getting Media Offline messages on footage that works perfectly fine on DVD. I tried burning straight to disc and also to an ISO.
Thanks.

marcc16 wrote:
All my titles, menus, etc are in 720x480. I'm not sure how to upscale it.
I tried just exporting as a Blu Ray, and the quality is terrible, the video menus are all screwy. Also, I am getting Media Offline messages on footage that works perfectly fine on DVD. I tried burning straight to disc and also to an ISO.
Thanks.
They would be! you have tried to scale up from 720x480 in non-square pixels to (possibly) 1920x1080, and you cannot expect to do that & have it look any good.
For HD, start using images that are ideally lossless (no JPEG) bitmaps or Tiff files are best, I find, and create your menu at the right resolution.
Please also check that the resolution & frame rate you are using is also BD legal.

H.264 for Blu-Ray Encoding Time

Hi All,
I have exported a Pro-Res 1080p 2 hour film from FCPX and just dropped it into compressor. I have then dragged the default H.264 for Blu-Ray settings on my video and it looks like it will take way over three hours. I have a friend running Media Encoder and with the same file on his laptop it does it in 40min and it's a slower spec . I am running Compressor 4.1.3 and the latest MAC OS operating system. I have enabled additional instanced checked and the number 1 in the drop down (there are no other numbers)
Is there anything I am doing wrong, surely it can't be this slow, it's not even set to multipass.
Thanks

Sounds about right to me for a rMBP.
Russ

PAL Presets for Blu Ray

i have a project shot on the Sony EX1 at 1920 x 1080 p. I want to export using ADOBE MEDIA ENCODER to 1920 x 1080 progressive 25 FPS. Most options are for US standards, when I click PAL it only offers interlaced.
If 1920 x 1080 Progressive 25 fps is not possible for blu ray, what settings do you suggest?

1080p @ 25 fps is not part of the Blu-ray spec. Call Sony and complain.

Premiere Elements breakdown by encoding Media for Blue Ray burning! Why?

Hello Girls and Guys,
Premiere Elements 10 stop to work by encoding projectmedia for Blue Ray burning!
Why?
Allways shows the message: The Programm is not working because of some error.
My System is:
Windows 7 Ultimate 64bit,
RAM 12GB, 1800Hz
Core i7, 3,8GHz
Radeon HD 6900-RAM 2GB
Do anybody know why this happens?
It happens not only with PE 10, also happens with Cyberlink PowerProducer 5.5 .

Thank You Steve,
the videos added are:
H.264/MP4 from Samsung
and AVI from Canon PowerShot
and MOV Videos from Canon Ixus
Camcorder Model is Samsung HMX-H100
The project settings were:
method: HD 1080i
timebase: 25.00frames/sec
resolution: 1920x1080
screenformat: 25-fps-Timecode
Audio samplerrate 48000Hz
scrennformat: Audio-Samples
There are no red lines above the clips if I add them to my timeline.
I store the media and project files on a partition of primary SSD-drive.( AHCI-mode )
Do You need any further informations to identify the problem?
Thanks looking forward your ideas

Files or Folders needed for blu-ray disc missing !

Hi,
I have Encore CS6. It successfully builds 'blu-ray folder' & 'blu-ray image' without any error. But when I try to create an iso image of the prepared folder using 'Ashampoo Burning Studio' it gives an error message saying that the folder doesn't contain all the files and folders needed for blu-ray. But when tried to do the same for DVD, there is no error. My blu-ray burning drive is broken and I want to check my finished project from my hard drive using Daemon's Tool and VLC or PowerDirector.
Could anybody advise how this can be fixed on Encore CS6. Encore CS5 never had this problem.
Thanks

Tried that as well. The player gave an unrecognized format error.

I have internet service on iMac but cannot get connection for Blu ray with airport express.

Why am I not getting internet connection for blu ray on tv with airport express?

Which exact model of the AirPort Express do you have?
Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

Exporting MPEG2 files for Blu-ray from 720p60

I am exporting MPEG2 files for Blu-ray from 720p60 using compressor 3.05. I export straight from Final Cut 6 to compressor. It all looks great except I end up with some frames in the video that pixelate. It is just one frame, and the average viewer may not see it, but if you go frame by frame you see it. I thought it was just a bad export, but I exported the file again and the same thing happens again on the exact same frame. The fact that it happened again on the exact same frame was very odd to me. It is this way on five different video files. It's certainly not like that in the original on my timeline, so I don't know why it is doing that.
I guess I will try exporting a quicktime file first and then putting that file through compressor to see if that makes a difference. Any ideas from anybody?

Exporting a quicktime file first still produced the pixelated frame. I'm not sure what else to try.

Render settings for Blu-Ray in the UK

Similar Messages

Maybe you are looking for