Render taking a really long time

I have a 1.33 GHz iBook with 1.5 gigs of ram and I am running Final Cut Pro 4.5. I am getting ridiculous render times for very short clips. What is the problem? Is my processor too slow? I already put as much ram as my iBook can take into it. Help is appreciated.
Thanks.

First, as Tom says, sequence settings must match footage settings or everything you put in the timeline will need to render. Is that what is happening?
Tell us what it is that needs rendering. If you are adding complex filters, more time will be needed to render.
RAM has very little to do with render times. Processor speed is what really makes a difference.

Similar Messages

  • So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

    So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • EHP4 ACT_UPG phase taking a really long time

    I'm still working on the EHP4 installation and for some reason the ACT_UPG phase in Step 5 - Pre-Processing, is taking a really long time, currently 7 hours and counting.  This phase apparently "Activates ABAP Dictionary Customer Objects".  I didn't think we had that many (relatively), in our system.
    Just wondering how long this phase took for those of you who have gone through implementing EHP4?  I'm running SQL 2005 on W2K3 all 64-bit on fairly decent hardware.
    Thanks!
    Tom

    Hi,
    Usuall Preprocessing phase takes very long time...
    But there are few steps which can increase the performence,...
    1) Depends upon how many parallel R3trans processes you have taken during configuration phase...
    2) Also, you can increase performence by changing some memory parameter in shadow system...For this run RSMEMORY program in SE38 then it will show you some parameter you can increase the moemory according to your hardware...
    3) Also, it will be good if you increase parameter db_cache_size in your database....
    Hope it helps
    Thanks
    Sunny

  • After the last iOS 7.1 update my phone is taking a really long time to receive and send pictures over messaging. Is there a fix?

    After the last iOS 7.1 update my phone is taking a really long time to receive and send pictures over messaging. Is there a fix?

    iMessages or MMS?
    MMS and SMS are exchanged over a carrier's cellular network only. Contact your carrier regarding a problem with MMS/SMS.

  • I have the sort of old macBook that is black and lately it has been taking a really long time to load things and to pull applications up? does anyone have suggestions of things i can do to see if they will work?

    make coputer is being really slow how do i fix it????????

    First try a utility like YASU or Cocktail to clean up caches and logs as well as basic disk maintenance.
    Also here is a link to a excellent tip sheet from participant ds store which can help you understand the complete process.
    https://discussions.apple.com/docs/DOC-3521

  • External hard drive taking really long time to reformat

    I'm reformatting a Seagate 2TB external hard drive that connects using USB 3.0 to my 2014 Macbook Pro (OS X 10.9.4).
    For some idiotic reason (because I had never used it before and wanted to see what happened), when I went to reformat the drive in Disk Utility from FAT32 into 'Mac OS Journaled (Extended)' I selected the option for "7 Pass Secure Erase".  It initially told me it should take "1 day, 7 hours", which seemed like a lot but was consistent with what other Support Communities people have said for such a large drive.
    It's now been reformatting for 20 hours, and the estimated time remaining says "1 day, 1 hour".  The progress bar has moved and it says it's on pass #3, but this seems like it's taking an abnormally long time.  Has something gone wrong?  For reference, I did a 1-pass into reformat into FAT32 on a similar 1TB external and it only took me around 20 minutes (so I estimated the new one would take ~5 hours (20 * ~2X storage space, 7 passes). I know "estimated time" on a computer always defies the laws of mathematics, but if "6 hours" is actually 20 hours, will I really be waiting for another 80 hours?  Can I do anything to speed this up?
    More importantly, can I stop the reformat and try it a gain with 1-pass, now that I've initiated the idiot way of doing it?  I don't want to screw the drive up or make it unreadable, it's brand new, but I don't want to have to leave my laptop on for the next 3 and a half days.
    Please help!  Thanks so much!

    SquareWarren wrote:
    I'm reformatting a Seagate 2TB external hard drive that connects using USB 3.0...
    ...I know "estimated time" on a computer always defies the laws of mathematics, but if "6 hours" is actually 20 hours, will I really be waiting for another 80 hours?  Can I do anything to speed this up?...
    I don't know which Seagate external you're using but my experience with a number of GoFlex externals has been that very little thought was given to ventilation, and, as a result, the drives tended to overheat. Watching the transfer rate using Activity Monitor during normal backup use, I found that after running a while and getting hot, the transfer rate went from MB's to KB's/sec. You're not actually transferring anything but the drive is being written to, so I'd expect the write speed to drop and what is already going to be a long process will just get longer. Sorry.

  • TDMS Shell - DB Export from source/sender system taking a VERY long time

    We're trying to build a TDMS Receiver system using the TDMS Shell technique. We've run into a situation wherein the initial  DB Export from source/sender system is taking a VERY long time.
    We are on ECC 6.0, running on AIX 6.1 and DB UDB v9.7. We're executing the DB export from sapinst, per instructions. Our DB export parallelizes, then the parallel processes one by one whittle away to just one remaining, and there we find out that the export is at that point single-threaded, and exporting table BSIS.
    BSIS is an FI transactional data table. We're wondering why is the DB export trying to get BSIS and its contents out??? Isn't the DB export in TDMS Shell technique only supposed to get SAP essential only config and master data, and NOT transactional data?
    Our BSIS table is nearly 700 GB in size by itself.  That export has been running for nearly a week now, with no end in site.
    What are we doing wrong? We suspect we may have missed something, but really don't think we do. We also suspect that the EXCLUSION table in the TDMS Shell technique may be the KEY to this whole thing. It's supposed to automatically exclude very large tables, but in this case, it most certainly missed out in excluding BSIS for some reason.
    Anyway, we're probably going to fire up an OSS Message with SAP Support to help us address this perplexing issue. Just thought we'd throw it out there to the board to see if anyone else somewhere has run into similar circumstances and challenges.  In the meantime, any feedback and/or advice would be dearly appreciated. Cheers,

    Hello
    Dont be bothered by the other TPL file DDLDB6_LRG.TPL, we are only concerned with DDLDB6.TPl.
    Answer following questions to help me analyze the situation -
    1) What is the current size of export dump
    2) Since when is the exports running
    3) What is the size of the source DB? Do you have huge amount of custom developments?
    4) Did you try to use table splitting?
    5) Do you doubt that there may be other transaction tables (like BSIS) which have been exported completely?
    6) Did you update the SAP Kernel of your source system to latest version before starting the Shell package?
    7) Were the DB statistics update during the shell or were they already updated before starting Shell?
    8) Is your system a distributed system i.e. Central instance and Database instance are on different application servers?

  • BB10 security wipe on a Q10 is taking a VERY long time.

    I am running a security wipe on a Q10.. It's been going for over an hour. I've read it can take around 15 minutes but this is ridiculous.. I don't think it's working. The phone was only a few days old and has had very little use. I was about to pull the battery when I read that that will cause the software to be reloaded.  The screen just has a swirly timer going around and what looks more like a printer icon. Any ideas what to do? I don't have much confidence it's going to finish, it feels like a bug.

    Hey, This is why I started another topic. My situation is slightly different and I'm looking for an answer to a different question: Hello, I’ve searched high and low for the answer to this problem. I can find others with a similar problem, but no solution. Maybe someone here can help? I preformed a security wipe last night at approximately 10pm. I did this because I realised I’d used 7.8GB of my 8GB limit and it was affecting the phone’s performance – specifically, I couldn’t get the hub to load. I use my phone for social media, emails and messaging only, and with my contacts saved elsewhere I’m not concerned about having to set the phone up again. Because of that, I selected to wipe everything besides the security option, which was greyed out and couldn’t be selected. The wipe was successfully processed, my phone automatically shut down and restarted, and the sim/USB looking load image appeared with a small, revolving circle beneath it. Having performed a security wipe before I know it can take a few hours, so I went to bed. It’s now 1:30pm the next day and the security wipe still hasn’t completed. I’ve read various accounts of the wipe taking between 2-4 hours, but nothing about it taking this long. I’m concerned that, although the circle is still revolving, the wipe has crashed somehow and I have no way of booting or cancelling the wipe. I’ve restarted the phone once to no effect – the same load screen appears following the Blackberry icon. I do wonder whether this effectively restarted the wipe causing a further delay, as I did it at approximately 7am and my phone is hot to touch, suggesting it's doing something at least. A lot of people suggest taking the battery out to force a reboot, but unfortunately as this is a Q10 (and unless I’m missing something) that’s not an option: the battery’s not accessible. Does anyone know what I can do? Is there a fancy way of restoring to factory settings? I was wondering whether there’s a pin-hole-esque reset anywhere? I honestly don’t mind starting from scratch; I just want my phone back! I’m going to wait for tomorrow until I do anything in case the wipe is just taking a really (really) long time. I’d just like to know in advance if there’s another solution. I would prefer to find the solution myself rather than going to my provider, who will probably leave me totally phoneless for weeks! So: how do I reboot/cancel the wipe if I need to considering I can't remove the battery? Any help appreciated!

  • Discoverer report is taking a very long time

    Hi All,
    I need help on below discoverer issue.
    discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.
    Regards
    Kumar

    Please post the details of the application release, database version and OS along with the discoverer version.
    I need help on below discoverer issue.
    discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.Please see these links.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Long+AND+Time&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Performance&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Messages are taking a very long time to send.

        Hello, I'm currently having a big problem with messages taking a very long time to actually send. The spinning wheel will stay there for hours. It only happens in one or two skype groups at a time where I can send messages normally in other groups. Does anyone have any idea how I can fix this?

    I have been having this problem for the last 4 releases. I have had some take up to 8 hours to send before. I can usually fix it by signing out then restarting skype. Just restarting skype doesn't work, nor does just signing in again.

  • I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and says 12 hours remaining. The text "Time remaining" flickers.

    I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and didnt complete.
    The text "Time remaining ... hours" flickers.
    I set it to start restoring from the 3GS backup yesterday at 1pm and the time remaining kept on increasing. I left it overnight and at 9am this morning the progress bar hadnt moved and it said 12 hours remaining.
    I don't know why its taking so long. I unplugged it and it just set up as new phone. So i did a factory reset and tried again at 4pm and it is now 12am and it says 4 hours remaining and my computer occasionally flickers. (Its not a bad computer, 2 months old, i7, 6GB RAM, Heaps of HDD space). It also messes with google chrome and i cannot browse the web at all while it is trying to restore my iphone.
    I have tried restarting my laptop and should i reinstall itunes? I simply dont see why it should take longer than 20 hours to copy over 20GB of data!
    Can anyone help me?
    Thank you

    I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

  • Is there any way to connect time capsule to a MacBook Pro directly via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...)?

    Perhaps via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...? I want to use TimeCapsule as back-up for an archive which is curently stored on a 2 TB WESC HD. 

    No, you cannot backup via direct usb connection..
    But gigabit ethernet is much faster anyway.. are you connected directly by ethernet?
    Is the drive you are backing up from plugged into the TC? That will slow it down something chronic.. plug that drive in by its fastest connection method.. WESC sorry I have no idea. If ethernet use that.. otherwise USB direct to the computer.. always think what way the files come and go.. but since you are copying from the computer everything has to go that way.. it makes things slower if they go over the same cable.. if you catch the drift.

  • My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

    My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

    Do you have current backups?
    Those symptoms could indicate a failing Hard drive. If it dies, all your documents go with it unless you have Backups.
    I have had very good luck with physical and battery problem diagnosis at the Genius Bar. Those guys put their hands (and their ears) to these machines, all day every day, and they know immediately what all those sounds mean.
    Your appointment for an evaluation is FREE, in warranty or out.

  • Bank statement import FF_5 sometimes takes a really long time

    Hello!
    In the middle of august we started to have problems with bank statement import FF_5 - sometimes (but not always) it takes a really long time (3 - 4 hours) to import data - usually it would take from few minutes to 1 hour (depending on size of import file). There is no error, the documents that match are posted automatically like always, the amount of documents, that are not posted automatically, is the same as always... We didn't do any new settings in system.
    We tried to find cause with debugger and sql trace, but there was no error - the import program works ok, then suddenly it stops in one line and searches in cluster table RFBLG without filled field GJAHR (year) - that means that it searches among approx 7.400.000 records (the size of our RFBLG is appr. 12 Gat the moment).
    We don't have ideas any more, how to find a cause for strange behaviour. The problem is, that there is no rule - sometimes it's ok, sometimes it works very slow - no matter how big the import file is. The problem occurs with all bank files (we have 3 banks).
    Do you maybe have any suggestions, what to do and how to find and eliminate the cause?
    Thankyou in advance for your tips!
    Meti

    Hi Meti,
    Have you tried analysing differences between files that it goes slow on and files where it goes quickly?  Sounds like there is some difference in file data that causes it to do a lookup.  If the traecs are not finding the differences, it might be wortwhile to put the file data into Excel for a slow and a fast and compare field level data?
    Regards,
    Tony

  • How to tune the query..."sum" operation is taking too much long time...

    how to reduce the execution time for the below query..."sum" operation is taking too much long time....
    SELECT
    B.DP_AVPS_STATUS,
    SUM(DP_AD_CURR_BAL*D.ISIN_CLOSE_PRICE) Qty,
    B.DP_NET_WORTH,
    B.CMN_DP_FLAG,
    B.RESTRAIN_TYPE ,
    B.LETT_GENR_DATE,
    E.MAX_NET_WORTH,
    E.MIN_NET_WORTH
    FROM DPMADV0 A, PABRNCHDTLP0 B, PABANKCCYP0 D,PADPNETWORTHDTLP0 E,
    (SELECT CID_NUMB FROM CFCUSTMASTD0
    WHERE SUB_TYPE NOT IN (1,2,5,6,7,28,29,30,31,40,41,48,49,50,57,83)) C
    WHERE A.DP_AD_BR_NBR = B.BRNCH_NUMB
    AND A.DP_AD_CCY_CDE = D.CCY_ALPHA_CODE
    AND A.DP_AD_ACCT_NBR = C.CID_NUMB
    AND E.DP_ACCOUNT_TYPE = B.DP_ACCOUNT_TYPE
    AND SUBSTR(B.BRNCH_NUMB,1,3) like SUBSTR(:hvBrnchNumb,1,3)
    AND ((B.DP_TYPE IN (2) AND B.DP_ACCOUNT_TYPE IN (10, 11)) or
    (B.DP_TYPE IN (3) and B.DP_ACCOUNT_TYPE=11 ) )
    AND B.DEL_FLAG = 'N'
    AND B.DP_STATUS = 'A'
    AND D.ISIN_STATUS = 'A'
    GROUP BY B.DP_NET_WORTH,B.RESTRAIN_TYPE,B.DP_AVPS_STATUS,E.MAX_NET_WORTH,
    E.MIN_NET_WORTH,B.CMN_DP_FLAG,B.LETT_GENR_DATE;

    Hi,
    please produce a plan with rowsource statistics (if not sure how, follow instructions in http://savvinov.com/2012/09/24/a-sqlplus-script-for-diagnosing-poor-sql-plans/) and post it using tags to preserve formatting.
    Best regards,
      Nikolay
    P.S. I also suggest that you work on your open threads:
    Handle:      946903 
    Status Level:      Newbie
    Registered:      Jul 16, 2012
    Total Posts:      11
    Total Questions:      5 (5 unresolved)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Maybe you are looking for

  • InternalFrame.setNorthPane(null) and JDesktopPane outline drag mode

    package components; import javax.swing.JDesktopPane; import javax.swing.JMenu; import javax.swing.JMenuItem; import javax.swing.JMenuBar; import javax.swing.JFrame; import javax.swing.KeyStroke; import java.awt.event.*; import java.awt.*; import java

  • Report for extracting the Expiratin date of the material

    Hi gurus, Is there any way We can extract the list of materials with SLED? Any standard T code? Regards Shashi

  • Ultra Search Portlet Configuration Problem

    Guten Tag, we are using OracleAS 10g Rel. 2 Portal. I've registered the Provider for Ultra Search. Now I understand that I have to add a data source in the OC4J_Portal configuration file "data-sources.xml" I want to make Ultra Search crawl and search

  • How do I globally set the font of a java program

    I would like to define a default font for all the labels, button, and text on a JFrame. I used the following lines: static Font defaultFont = new Font("dialog", Font.PLAIN, 12); contentPane = frame.getContentPane(); contentPane.setFont(defaultFont);

  • How to disable partition sharing

    Hello, I have turned on File Sharing for my Mac to access the Mac's public folder on the Windows PC. This works just fine when the SMB option and my user account is checked at System Preferences > Sharing > File Sharing > Options. However, all my par