Render video pon audio import from Soundtrack Pro

Unique issue I have here. My video is standard NTSC Animation Codec and is in my Sequence in FCS2. I import my project into Soundtrack Pro edit my audio, Export back into FCS 2 (following the manual to insure proper steps).
Once I arrive back into FCS2 my video needs to be rendered. It checked the codec and everything matches up fine. Why is it now asking me to render mt video?

Paul,
Did you edit to picture inside STP? And was it in sync there?
You may have an issue with a frequency shift. Audio doesn't have frames. It really runs in "real time." So if you shift frequencies the units per second change. It still has the same number of units, so ultimately the time changes.
How did you get the audio into STP in the first place?

Similar Messages

  • Audio Key Frames Scrambled On Import From P Pro

    I'm importing three audio tracks from Premier Pro 5.5 into Audition, and each audio track may contain several dozen separate clips.
    On some tracks I loose all my audio key frames, and the "rubber band" has snapped
    to the bottom and the track has no output. On other tracks, I'm loosing about a third of the key frames, poof, gone. In some cases, the key frames have been moved around within the clip,
    say I created a fade up at the beginning with two key frames, and after import the first key frame, at -00 db, has moved ahead five seconds, and the second key frame is
    at the proper level, but also has been slid over five seconds. Other key frames randomly drop to -00 db from where they originally were.
    In P Pro I adjust my audio automation by setting key frames and moving the "rubber band". I then export by Edit > Edit In Audition > Sequence and check the "Send
    Clip Vloume Key Frames" box, and un-check the "Render Audio Clips Effects" box. In the P Pro timeline I have not seclected any individual clips or tracks, I don't
    believe I need to.
    A multitrack session opens in Audition, and my key frames are scrambled up.
    Using Mac Pro with OS 10.6.8 , P Pro 5.5.2 and purchased the CS 5.5 Creative Suite last December
    Thanks in advance for any help that may keep me from going nuts    Tom/ Miami

    Thanks for the reply and I do apologize for some of the newbie questions, I downloaded MPEG StreamClip and attempted the convert. 
    I have to admit the following QT movie inspector details of my original video are below and play fine in QT but once I convert the video appears choppy at times almost as if clips are being dropped?
    Is my default format simply not compatible?
    If not then what would you recommend my settings be in MPEG Streamclip to export without any choppiness?
    Again I do thank you for your help!!!!

  • Hello, Please Help! When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync. Please Help!!!

    Hello, Please Help!
    When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
    Please Help!!!
    Edgil

    Make sure your easy setup has the correct frame rate for your sequence.  Seems crazy but somehow or other fcp assigns a frame rate to audio files.   I've found this can sometimes be tricky to get right.  Here's what I've done to force the issue.  Make sure the easy setup frame rate reflects that of the target sequence in fcp.  Create a new project.  import the audio in the new project.  And then copy the clip from the new project to your main project. 
    Good luck

  • Exchange audio files in Soundtrack Pro

    Im experimenting with mastering audio files in Soundtrack Pro 3.0.1. 
    I am wondering if I can swap audio files in and out of the same project file - so I can keep the same STP effects settings while changing the audio file version from v1 to v2.  Does this make sense?
    As a side question... would it be better to convert the output from 24 to 16 bit (and dither it) in Soundtrack, or let that happen when it imports into iTunes? 
    Thanks for helping a complete stranger.  That always amazes and inspires me. 

    Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro.  So I could go no further in my perverse science experiment. 
    It also appeared that I could only import an aif but not a wav? 
    I gave up on STPro and did what I needed to do in Logic, which I use regularly.    
    Thank you for folowing up on this. 
    PS.  I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect.  It appears that the new version (3.0.1) does not allow you to do this anymore?  You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?  
    Im such a newbie at STPro that I am probably not using it right? 

  • Trouble with the round trip from Soundtrack Pro 2 to Final Cut Pro

    I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
    This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
    Thank you in advance.

    Make sure your easy setup has the correct frame rate for your sequence.  Seems crazy but somehow or other fcp assigns a frame rate to audio files.   I've found this can sometimes be tricky to get right.  Here's what I've done to force the issue.  Make sure the easy setup frame rate reflects that of the target sequence in fcp.  Create a new project.  import the audio in the new project.  And then copy the clip from the new project to your main project. 
    Good luck

  • Reconnect Media from Soundtrack Pro

    I exported a clip from FCP to Soundtrack Pro and cannot seem to Reconnect Media in FCP; when I go through the selection process to reconnect in FCP; I can pick it but the clip is still declared offline/missing. How do I get this fixed using FCP or Soundtrack Pro? Thanks.

    Matthew Owen2 wrote:
    I am trying to export a single track with audio from Soundtrack Pro. When I select File>Export, all of my export options are grayed out. I've tried highlighting the track and that didn't work. Any thoughts?
    Is the menu item *File > Export* greyed out?
    If so, it's probably because you have the audio open in the audio file editor. The only option from here is to Save As.
    If you put the audio in a track of a multitrack project then File>Export should be available to you.

  • M-audio 410 and Soundtrack Pro won't "PLAY NICE" together!!

    I can't get any output to my Firewire 410 from Soundtrack Pro. The input works but no output. I tried every setting with not one db of output. The most recent was not looping through another firewire device, but to go straight into my G5.
    Does anyone have this device working on your mac?
    Please help if you can,
    JCB123

    I have the same setup and haven't had any problems. I am connected by firewire. In STP, my input device and my monitor are set to Firewire 410. In System Prefernces / Sound, I have both my input and output set to Firewire 410 as well. And in the M-Audio Firewire 410 audio interface software under the Mixer Tab, I have spdif highlighted under Analog In. Then under the Output Tab I have Main highlighted under SPDIF OUT.
    I run an optical cable from the 410 to a hometheatre system right now but have a proper set of audio monitors on the way. I intend to plug them into outputs 1&2 in which case I will also highlight 1/2 under ANALOG IN under the MIXER tab and highlight MAIN under 1/2 OUT under the OUTPUT tab.
    Hope this helps a bit. I am still new to this but so far have been able to get this far. Good luck!

  • I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files.  I have downloaded iMac library manager and can see them. can someone shed some light please ?

    i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
    and it's not reading the files.  I have downloaded iMac library manager and can see them.  when i go back into iphoto i'm getting the following message :
    Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
    I don't know what to do - please help !!!!
    can someone shed some light please ?

    So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • How to transfer video and audio files from windows PC to new ipad?

    How to transfer video and audio files from windows PC to new ipad?

    iTunes: Syncing media content to iOS devices and iPod
    Sync with iTunes.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums, artists, playlists that you want to sync
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    Follow the same procedure for Movies.

  • Exporting from Soundtrack Pro - Trouble

    I am having problems exporting from Soundtrack Pro. I haven't had these problems before.
    I have tried to export a track to MP3 and to Compressor but all I get is the Exporting window and that's as far as it goes. It says, 'Time Remaining: Estimating...' but then that's it. I had even left it for a few hours and still nothing happened.
    The program isn't frozen, just the export isn't working. Is this a common problem? Can it be fixed?
    Many thanks.

    I have the same problem...
    I finished working on a project and when I tried to export it - it would start out just, tell me that it would be done in less than a minute and the just suddenly stop 1/4 of the way for no reason. Same thing happens whatever I do - in the same exact place. I spent a lot of time finishing this edit so I really want to get it back to FCP.
    Can anyone help?

  • Grading over a transition imported from Premiere Pro

    Anyone out there have a simple, fast and relaible way to deal with grading over a cross  dissolve imported from Premiere Pro?
    How do you (can you) dissolve from one grading layer to another over the transiton clip? I have been having no luck at all with the dissolve feature in SpeedGrade.
    If anyone from Adobe is out there listing, SpeedGrade needs a drag and drop cross dissolve effect / tool like Premiere.
    Working on longer pieces with multiple cross dissolves - SpeedGrade almost becomes useless!
    When can we expect a proper upgrade to SpeedGrade that will bring it in line with Premiere and After Effects?
    Cheers.

    Unless you turned on proofing, that would have no effect whatsoever.
    It sounds like the root problem is that color managed applications are having problems displaying the color you expect - which means that you expect something unrealistic, or that your display profile doesn't match your actual display.

  • Is it possible to burn multiple uncompress tracks onto an audio cd from Logic pro?

    Is it possible to burn multiple uncompress tracks onto an audio cd from Logic pro?

    Hi,
    Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
    Jim

  • I need help fast please an't render my full audio equalizer from adobe after effect

    I need help really fast i can't render my full audio equalizer from adobe after effect

    Without knowing any details about your comp or render settings, this is going nowhere. This could be anything from Quicktime acting up to having set the work area.... We don't even know what version of AE you use on what OS.
    Mylenium

  • No video (black), audio only, from imported .mov files

    Bear with me while I explain the whole process to get where I am, which is that in FCE, I am importing .mov files and they are completely black, no video, just audio.  When I bring a clip into the timeline and try to render even a small clip, it is still black.
    I'm not well-versed in video so please bear with me:
    Steps:
    1.  I received large video files from a videographer
    2.  the large files could not be imported or played in FCE
    3.  downloaded HandBrake converter and began converting files.  Kept them at the same size, but they were then renamed .mov files.
    4.  When I open them in QuickTime, they are black - no video.  But when I see them on the drive and press spacebar in 'finder' to play them, I can see the video.
    5.  When I import them into FCE they are black - no video - just audio.
    FCE is currently set (in Easy Setup) to:  AVCHD-Apple Intermediate Codec 1920-1080i60
    Any help would be greatly appreciated.  I tried converting one file to mp4 and it works fine in FCE, but this takes a long, long time to convert.
    thanks
    There is a 2nd issue that may relate to this:  I am trying to import JVC .m4v files and I am getting "File error 1 file(s) recognized, 0 access denied, 1 unkown".  These files CAN be opened in Quicktime.
    FCE HD 4.0.1
    Mac OS 10.6.8

    I'm having similar, but slightlly different issues.
    I have been using FCE 4 on Mac OSX 10.7.5 with Quicktime 10.1 (501.29).
    I convert my footage in Mpeg Streamclip (GREAT free program) and set the files to the Apple Intermediate Codec.  This makes them work really well in my timeline and I don't have rendering issues or problems.
    So, my problem comes when I File/Export/Quictime Movie.
    The original file plays fine, but they're 2-3 gbs each, so I put them into Quicktime to convert them to a webfriendly size, but every single time they come out as an audio only file.  GRRRR!
    Any help would be greatly appreciated.  Maybe I'm missing something stupid.
    Thanks so much for your help.
    Sincerely,
    Steve

  • Unexpected problem: uncaught exception when working with audio files in Soundtrack Pro

    Hey,
    Whenever I double click an audio file in the timeline to work on it, I end up getting the Error message: "Unexpected problem: uncaught exception" and Soundtrack Pro eventually crashes.  Also, this happens when I try to work with audio files in the file editor.  I have Leopard and am using Logic Studio 8.  Any insight would be much appreciated. Thanks
    Matt

    Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro.  So I could go no further in my perverse science experiment. 
    It also appeared that I could only import an aif but not a wav? 
    I gave up on STPro and did what I needed to do in Logic, which I use regularly.    
    Thank you for folowing up on this. 
    PS.  I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect.  It appears that the new version (3.0.1) does not allow you to do this anymore?  You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?  
    Im such a newbie at STPro that I am probably not using it right? 

Maybe you are looking for

  • Same itunes library for 2 iphones on 2 computers?

    Me and my brother would like to use both of our iphones on the same library but also access that library from different computers.  Is this possible and how?

  • On bank web site opening a check shows in a new window and cannot access the print capability in Firefox

    When I open a check picture from my bank register it opens in a new window and I cannot print from that window. I want to be able to print to the pdf printer so that I can save a copy of my check to the hard drive. I do not have any access to any pri

  • USB 2.0 external drive not recognized

    I just bought a Seagate 200GB bare-bones internal HD and put it into an i-rocks USB 2.0 enclosure. The drive spools up and and is running, but is not picked up by either the system profiler or the disk utility. Is there something that I should do reg

  • Function Previous() does not retrieve good values

    Hello Forum, I'm using BO XIR2, Desktop Intelligence. I'm displaying some quantities and turnover by month and I try to compute the % of increase/decrease between a month and the previous month. The report looks like that : .........................J

  • Flat file to table - send mail report on error

    Hello, I've created simple project - loading data from csv flat file to oracle database table, using this tutorial: http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_project_flatfile-to-table/odi_project_flatfile-to-table.