Render
I've just switched to a HDV work flow from SD, now I can't get motion to do a ram preview of all my frames and when I try to play back it's like playing a 10fps that why I trying to make the ram preview. I have like 2000f and it will only render maybe 400f and not the rest. I've set resolution to quarter- quality to draft and it still doesn't help, I just did all updates. I don't have any filters added on and only one behavior. this should be a walk in the park. I'm working on a 24"imac 4 gb ram 135gs left on my internal hard drive 300+g on my external drive. Any help would be appreciated. I sent a 1 minute slug from FC to Motion and then made some clips in FC exported them to my hard drive and then apply them to my Motion project.
Message was edited by: Timgggg
This happens a lot to people these days because they think that HDV is like working in DV only bigger.
HDV is a VERY processor intensive, long GOP codec. It is not recommended to work with HDV in Motion because of this. The preferred workflow is to convert the HDV footage to an I-frame codec like ProRes so that the processor doesn't have to work as hard when building your gfx.
Also, RAM previews rely on RAM to cache all the effects and frames for playback. You're not going to be able to cache over a minute of HDV with any effects or behaviors and play it back in real time.
Again, you're going to be much happier with the workflow as soon as you get out of HDV.
Andy
Similar Messages
-
How can I render an active link (yrl) within a UIX/XML page
How can I render an active link (url) within a UIX/XML page.
How can I get <jbo:ShowValue> to work in UIX/XML, or is there another way?
Bill G...It may seem strange, but the <contents> of <rawText> aren't actually
raw - it's only the "text" attribute that's raw. (It seems strange because
it is. Ah well.) This is different from UIX JSP.
So, try something like the following:
<bc4j:attrScope name="Notes">
<contents>
<rawText text="<a href=""/>
<rawText>
<boundAttribute name="text">
<bc4j:attrProperty name="value"/>
</boundAttribute>
</rawText text="">"/>
Some text in the link.
<rawText text="</a>"/>
</contents>
<bc4j:attrScope>
Thankfully, this will be much simpler in 9.0.3, when the following
will work:
<link text="Whatever you want">
<boundAttribute name="destination">
<bc4j:attrValue name="Notes"/>
</boundAttribute>
</link> -
Unable to render video in PSCS4 - Error Messages- QT DLL Issue??
I started this thread in the Adobe Forums for PhotshopCS4, but the consensus there was that my issue is a QuickTime issue, perhaps with a DLL and iTunes. I have included a few of those suggestions at the end of the post. I have tried uninstalling QT Pro, cleaning and reinstalling with no improvement. I have not removed iTunes and reinstalled.
`````````````````
I am unable to render video it seems in Photoshop CS4 Extended. Despite having the latest QuickTime Pro installed and all updates to Vista 32 bit and to CS4 Design Premium, I get the following error message:
"The procedure entry point CFCreateApplicationRepositoryPath could not be located in the data link library CoreFoundation.dll"
This happens when, for example, I load 100 medium resolution JPEGs as an image sequence and choose File >Export > Render Video.
If I OK through the error a couple of times I get a screen with output options, but usually some are greyed out. When I CAN put in QuickTime settings and choose export I get the following error:
"Could not complete the Render Video Command because of a program error."
When I have opened a support case with Adobe it has regularly been closed after being told to get QuickTime 7.2 or higher. GGGrrrr. I have QT 7.6.5 Pro installed.
Any help much appreciated....I do have Premiere Elements 7 installed as well FYI.
Thanks! System Info below:
Adobe Photoshop Version: 11.0.1 (11.0.1x20090218 [20090218.r.523 2009/02/18:02:00:00 cutoff; r branch])
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Processor speed: 2400 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 9500 GT/PCI/SSE2
OpenGL Drawing: Enabled.
Video Card: NVIDIA GeForce 9500 GT
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver Version: 8.17.11.9562
Built-in memory: 3070 MB
Free memory: 1180 MB
Memory available to Photoshop: 1632 MB
Memory used by Photoshop: 80 %
Image cache levels: 4
Serial number: removed
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS4\
Temporary file path: C:\Users\Phil\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 289.2G, 122.5G free
E:\, 298.1G, 50.0G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
Was your QT properly installed with correct privileges? As Mr. Cox said, it seems there is an issue with your QT install. also, in the QT system control panle, enable the Allow Encoding using Legacy CoDecs option. this often fixes the weirdest issues (as it also catches a number of other legacy calls to QT components)...
Mylenium
Thanks guys- the QT install SEEMS fine....? I will try allowing legacy CODECs and if that doesnt ehlp I will totally uninstall QT Pro, clean the registry, reboot and install QT from the top. Will let you know how I get on with this.
Phil
I have enabled using legacy CODECs and restarted, same error message.
I have completely uninstalled QuickTime(Pro), run CCleaner to clear files and the registry...I have then rebooted, reinstalled Quicktime(Pro) 7.6.5, rebooted. I get the very same error message at that time.
Any further suggestions appreciated.
All the google searches point directly at Apple like Chris pointed out. I noticed that there were a lot of Apple product hits but the most standing out was itunes. Did you happen to install itunes software (or some other Apple product) and maybe itunes over-wrote the .DLL? Other then that thought I don't have any other input.
I agree this is an issue with an Apple DLL. The error you're getting suggests that the wrong version of the DLL is being used. It means that the thing that is rendering the video is expecting the CoreFoundation DLL to have a particular function called CFCreateRepositoryPath but it's not there.
What could be happening is that there are multiple instances of this DLL on the computer and the PATH is leading to the wrong one.
You might search your entire hard-drive and find where the CoreFoundation DLL exists and what version each is. If there is only one version, then perhaps your version of QuickTime is actually too new. Photoshop 11.0.1 came out a long time ago, and the version of QuickTime referred to in the support-ticket-closure response is also pretty old, so maybe the newest QuickTime is using a newer version of the DLL that Photoshop knows how to deal with.
Searching my system for CoreFoundation. there is one smaller version of the DLL in Apple Application Support dated in November and then several larger ones in directories dealing with mobile phones like the iPhone, which I don't have one of, dated a few months earlier.
I'm guessing the iPhone stuff came with iTunes, which I do have installed, though I don't really use it.
Thanks for looking, really hoping for some help here."The procedure entry point CFCreateApplicationRepositoryPath could not be located in the data link library CoreFoundation.dll"
Thanks for all the detailed information, pw. It's very helpful.
Okay, the most recent versions of QuickTime require a fully functional Apple Application Support in order to run properly. You're getting a problem with one of the Apple Application Support dlls. So the best thing to do first would be to uninstall both Apple Application Support and QuickTime, and then reinstalling QuickTime (which should reinstall a fresh version of Apple Application Support).
There's 7/Vista 32-bit instructions for doing that in the following post:
http://discussions.apple.com/thread.jspa?messageID=10760492� -
Media Encoder CC won't render Magic Bullet Denoiser II
Hello there,
i've got the following Problem: I am having Premiere CC and used the Red Giant Plug-In Denoiser II on my last project, when i import this project to the Media Encoder and select Quicktime for output, the Media Encoder won't render the clip with this Plug-In. i always get the original files out, without the denoiser. Original footage from in premiere is 2,5k CinemaDNG RAW from the Black Magic Cinema Camera.
thxI feel like there was a recent update to the RG plugins (inside of the last 30 or so days.) Are they up to date?
-
Photo Gallery thumbnails in business catalyst render in different sizes in different browsers
Photo Gallery thumbnails in business catalyst render in different sizes in safari and chrome but are fine in firefox. What is the issue with Safari? I have tried the different algorithm options such as fill_proportional etc and firefox is the only browser that displays correctly. I thought safari was the most standards compatible browser - what's the problem here?
Hi,
If you have seperate XML file but with the same basic structure then you can change the XML a Spry dataset refers to and regenerate the spry region without reloading the full page.
So on my photo gallery page I can change the album the photos are shown from via the seturl sprydata function as below. dsPhotos being my Spry dataset that points to the relevant XML dataset with my image references and captions etc. My XML is actually dynamically generated from Picasa RSS feeds (and RSS feeds are XML) but the principle will be the same with your static XML.
First I add an event listener for when someone clicks on an album (the li tag within my div with the id "albums" holds a photo and title for each album.)
function Albums()
var myalbums = Spry.$$("#albums li", "TabbedPanels1")
var rows = dsAlbums.getData();
var setListener = function( element, value )
Spry.Utils.addEventListener( element, "click", function(){ showAlbum( value ); },false );
for( var i = 0, length = myalbums.length; i < length; i++ )
setListener( myalbums[i], i );
Then this is the code which changes the photo album to be shown. (when the user clicks the relevant album)
function showAlbum(i)
pauseShow();
pImage = 'No';
var rows = dsAlbums.getData();
var albumid = rows[i]["albumid"];
var url = "xml/PicasaAphotoFeed.asp?albumid=" + albumid;
dsPhotos.setURL(url);
dsPhotos.loadData();
var rowcount = dsAlbums.getRowCount() - 1;
var nextalbum;
var navnext;
var n;
The page is here www.thehmc.co.uk/photo5.html is you want to see it in context.
In your case showAlbum would switch between Frank.xml or Wolfie.xml depending on how you decide to name your xml datasets.
Regards
Phil -
Reporting Services Webpart - web part does not auto render consistantly
We are on SharePoint 2010 (integrated with Reporting Services)- on several sites we have added the Reporting Services Web Part and with a saved parameter. The behavior of this web part is not consistent. There are times when I open up a site
and the web part will auto render the report. 5 minutes later I can go into the same site, and the web part does not auto render the report. I have to do edit page, or close and re-open the web site. Has anyone experienced this type of behavior.
I've looked for assistance with this issue on-line cannot find anything that specifically addresses this issue.Hi Karen,
If the parameters have default values in the report, then the report can be rendered automatically.
For this issue, I recommend to verify the things below:
Does this issue occur when you open the page with the web part in a new tab in the browser or go back to the previous opened tab?
Does this issue occur in the server side or client side?
Please add the site to trusted sites in Internet Explorer to see how it works.
Please change another browser to see how it works.
For narrowing down the issue scope, please test with another report and compare the results.
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
"Unknown Error" all the time, every time on render of project, any codec
Trying to render a feature length documentary for a film festival (ie.. I don't have time for this). The project timeline runs 1 hour and 20 minutes. If I try and export or queue the timeline in media encoder to h.264, QuickTime or Select "Match Sequence Settings" as my output format, the media encoder fails to render with the very informative "UNKNOW ERROR" every time at random point in the render procedure. When rendering it as an mpeg once, I am able to see one place where it crashed. It is a place in the timeline where the are no transition, not cuts, no overlays, absolutely nothing out of the ordinary. Yet, it crashed there this time. Next time, it will crash elsewhere.
I am trying to render the timeline on segment at a time. So far, each smaller segment of 20 minute blocks seems to be rending just fine and goes past the points where other renders failed. Looks like Media Encoder can't handle large projects.
Here's all the requested information for a complete diagnosis of the problem.
Error given to me by Media Encoder : "Unknown Error" --that's it. The time rendered varies between 43 minutes and 3 hours.
- Encoding Time: 00:54:04
05/03/2015 05:59:03 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
Adobe Premiere Pro CC 8.1 Caravan
2014.2 Release
8.2.0 (65) Build
OS X 10.10.3 (14D136)
iMac (27-inch, Mid 2011)
3.4 GHz Intel Core i7
24 GB 1333 MHz DDR3
AMD Radeon HD 6970M 2048 MB
I'm right handed, my favorite color is blue, the computer is on the Eastern TimeZone
I need this timeline rendered and I'm not interested becoming a forensic-level technical authority on Premiere to get it. This problem has come and gone now for months and is intolerable. I pay for software and I expect it to work, and at least give me something more useful than "UNKNOW ERROR." There is no such thing. As a former developer, I can say with authority that simply dumping to a message that says this is lazy and sloppy programming. Buffer underruns, stack overflows..whatever. Everything is caused by something. I can't begin to diagnose this problem unless Adobe provides software error handing that gives me some idea of what happens. Where did it happen in the timeline? What routine/subroutine gave the error? Was it a codec error? Come on....these things are not unknowable.
Adobe, PLEASE stop coming out with new features when you can't make your existing pay by the month software reliable! Maybe FCPX is worth another look.UPDATE:
tried rending the entire project as Quicktime ProRes 422 (since that is what clips were recorded in originally anyway) and Media Encoder gto 89% complete....and the entire application CRASHED. WHO-HOO! Way to go, Adobe!!!!!
Here's part of the crash report if it means anything. Maybe I'll try it again and see if anything changes! Can't get any worse.
Process: Adobe Media Encoder CC 2014 [864]
Path: /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
Identifier: com.adobe.dynamiclinkmanager.application
Version: 8.2.0.54 (8.2.0)
Code Type: X86-64 (Native)
Parent Process: dynamiclinkmanager [826]
Responsible: dynamiclinkmanager [826]
User ID: 502
Date/Time: 2015-05-03 20:05:05.829 -0400
OS Version: Mac OS X 10.10.3 (14D136)
Report Version: 11
Anonymous UUID: 5CCC287C-7B70-E4F9-D0E8-4180FB0681CC
Sleep/Wake UUID: 0ED73954-6C5A-4CCE-B807-974B71171E95
Time Awake Since Boot: 33000 seconds
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGBUS)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff94c8d4de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff94c8c64f mach_msg + 55
2 com.apple.CoreFoundation 0x00007fff94955eb4 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fff9495537b __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x00007fff94954bd8 CFRunLoopRunSpecific + 296
5 com.apple.HIToolbox 0x00007fff8ab7256f RunCurrentEventLoopInMode + 235
6 com.apple.HIToolbox 0x00007fff8ab722ea ReceiveNextEventCommon + 431
7 com.apple.HIToolbox 0x00007fff8ab7212b _BlockUntilNextEventMatchingListInModeWithFilter + 71
8 com.apple.AppKit 0x00007fff8c8fe9bb _DPSNextEvent + 978
9 com.apple.AppKit 0x00007fff8c8fdf68 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 346
10 com.apple.AppKit 0x00007fff8c8f3bf3 -[NSApplication run] + 594
11 com.adobe.exo.framework 0x00000001057f3a88 exo::app::OS_AppBase::RunEventLoop() + 56
12 com.adobe.ame.application 0x00000001000195c1 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 11809
13 com.adobe.ame.application 0x0000000100049ba8 main + 440
14 com.adobe.ame.application 0x0000000100003e34 start + 52 -
Retenção de Imposto de Renda por mês
Olá a todos,
Estou tendo dificuldades em configurar retenção de impostos (imposto de renda) esta retenção é acumulativa, quando fazemos uma compra de um mesmo fornecedor se o valor destas compras for superior a 1.499,16 começa a reter imposto de renda, a retenção compra a compra esta funcionando, ou seja, quando um compra passa de valor 1.499,16 o imposto fica retido, agora se existir 2 compras deste mesmo fornecedor uma no valor de 1.400,00 e outra no valor de 300,00 no mesmo mês deveria reter o imposto, mas isto na esta acontecendo.
Ficarei muito grato caso alguém possa me ajudar, segue abaixo as faixas de retenção:
Até 1.4999,15 - Isento
De 1.499.16 até 2.246,75 - 7,50%
De 2.246,76 até 2.995,70 - 15,00%
De 2.995,71 até 3.743,19 - 22,50%
Acima de 3.743,19
Obrigado,
Luciano de CarvalhoOlá Paulo,
Obrigado por ter respondido;
Na transação > Define Withholding Tax Type for Invoice Posting(Definição das categorias IRF - Lançamento com Fatura); criei um Withholding Tax Typo "PF" no tipo de acumulação (Accumulation type) eu coloquei por mês (Per month).
Na transação > Define Formulas for Calculating Withholding Tax(Dados de cabeçalho para atualização de fórmulas); configurei a categoria "PF" da seguinte forma:
"To base amnt"----
WhldTax---------
RedRt---------
Tedc.base amt----
Dec.red.base amt
1.499,15----
>0,00----
>0,00----
>0,00----
>0,00
2.246,75----
>7,50----
>0,00----
>1.499,15----
>112,43
2.995,70----
>15,00----
>0,00----
>2.246,75----
>280,94
3.743,19----
>22,50----
>0,00----
>2.995,70----
>505,62
99.999.999,99----
>27,50----
>0,00----
>3.743,19----
>692,78
Na transação > Define Min/Max Amounts for Withholding Tax Codes(Montantes mínimos/máximos por código IRF); configurei a categoria de IRF "PF" da seguinte forma:
Valid From = 01.01.2010
Minimum w/tax amount = 10,00
Maximum w/tax amount = 999.999.999.999,00
Minimum base amount = 0,00
W/tax bse exem. amt = 0,00
Após esta configuração simulei a entrada de duas notas fiscais a primeira no valor de R$ 1.300,00 ele calculou certo pois esta primeira fatura é isenta, já na segunda onde o SAP deveria acumular pois estava no mesmo mês entre com uma nota com valor de R$ 2.000,00 onde ele deveria consideram como IRF R$ 159,61 mas ele esta considerando apenas R$ 22,00 como IRF isto por que o SAP não esta consideram a primeira nota.
Fiz vários teste mas não consegui fazer com que ele acumule as notas do mesmo fornecedor no mesmo período.
Ficarei muito grato, se alguém puder me ajudar.
Luciano de Carvalho
Edited by: Luciano de Carvalho on May 26, 2010 2:30 PM -
Unable to render video in PSCS4 - Error Messages
(Reposted here from CS Forum on a suggestion)
I am unable to render video it seems. Despite having the latest QuickTime Pro in stalled and all updates to Vista 32 bit and to CS4 Design Premium, I get the following error message:
"The procedure entry point CFCreateApplicationRepositoryPath could not be located in the data link library CoreFoundation.dll"
This happens when, for example, I load 100 medium resolution JPEGs as an image sequence and choose File >Export > Render Video.
If I OK through the error a couple of times I get a screen with output options, but usually some are greyed out. When I CAN put in QuickTime settings and choose export I get the following error:
"Could not complete the Render Video Command because of a program error."
When I have opened a support case it has regularly been closed after being told to get QuickTime 7.2 or higher. GGGrrrr. I have QT 7.6.5 Pro installed.
Any help much appreciated....I do have Premiere Elements 7 installed as well FYI.
Also I have installed the latest Nvidia Driver each time I have tried working with video, had no improvement.
NOTE related thread here that I opened previously on APE7. Am deleting the NVIDIA stuff again and rebooting to test if those Nvidia apps are cause.
http://forums.adobe.com/thread/516453?tstart=0
UPDATED- removing the NVIDIA apps had no effect- same exact errors on trying to File > Export > Render Video
Thanks! System Info below:
Adobe Photoshop Version: 11.0.1 (11.0.1x20090218 [20090218.r.523 2009/02/18:02:00:00 cutoff; r branch])
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Processor speed: 2400 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 9500 GT/PCI/SSE2
OpenGL Drawing: Enabled.
Video Card: NVIDIA GeForce 9500 GT
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver Version: 8.17.11.9562
Built-in memory: 3070 MB
Free memory: 1180 MB
Memory available to Photoshop: 1632 MB
Memory used by Photoshop: 80 %
Image cache levels: 4
Serial number: removed
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS4\
Temporary file path: C:\Users\Phil\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 289.2G, 122.5G free
E:\, 298.1G, 50.0G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2008/08/27-18:10:41 53.355610 53.355610
AdobeLinguistic.dll Adobe Linguisitc Library 4.0.0
AdobeLM.dll AdobeLM 3.0.11.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
AdobeLM_libFNP.dll FLEXnet Publisher (32 bit) 11.5.0.1 build 57427
AdobeOwl.dll Adobe Owl 2008/08/14-18:38:42 2.0.70 53.354161
AdobeOwlCanvas.dll Adobe Owl Canvas 2.0.70 53.354161
AdobePDFL.dll PDFL 2008/08/20-20:15:08 53.204060 53.204060
AdobeUpdater.dll Adobe Updater Library 6.0.0.1452 (BuildVersion: 52.338651; BuildDate: Wed Apr 16 2008 19:28:20) 52.338651
AdobeXMP.dll Adobe XMP Core 4.2.2 53.352624
AdobeXMPFiles.dll Adobe XMP Files 4.2.2 53.352624
AdobeXMPScript.dll Adobe XMP Script 4.2.2 53.352624
adobe_caps.dll Adobe CAPS 2,0,99,0 2.135373
adobe_epic.dll Adobe EPIC 3.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
adobe_eula.dll Adobe EPIC EULA 3.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
AFlamingo.dll AFlamingo 2008/07/09-11:28:44 53.350580 53.350580
AGM.dll AGM 2008/08/27-18:10:41 53.355610 53.355610
ahclient.dll AdobeHelp Dynamic Link Library 1, 3, 12, 0
aif_core.dll AIF 1.0 53.352475
aif_ogl.dll AIF 1.0 53.352475
amtlib.dll AMTLib 2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
amtservices.dll AMTServices 2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
ARE.dll ARE 2008/08/27-18:10:41 53.355610 53.355610
asneu.dll AsnEndUser Dynamic Link Library 1, 6, 0, 8
authplay.dll
AXE8SharedExpat.dll AXE8SharedExpat 2008/06/11-20:19:53 NFR 53.348206 53.348206
AXEDOMCore.dll AXEDOMCore 2008/06/11-20:19:53 53.348206 53.348206
Bib.dll BIB 2008/08/27-18:10:41 53.355610 53.355610
BIBUtils.dll BIBUtils 2008/08/27-18:10:41 53.355610 53.355610
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2009/01/16-10:41:46 53.372607 53.372607
data_flow.dll AIF 1.0 53.352475
ExtendScript.dll ExtendScript 2008/07/17-13:28:24 53.351316 53.351316
FileInfo.dll Adobe XMP FileInfo 4.2.2 53.352624
FNP_Act_Installer.dll FLEXnet Publisher (32 bit) 11.6.0.1 build 60959
icucnv36.dll International Components for Unicode 2008/03/20-16:33:10 Build gtlib_1.1 CL#7223
icudt36.dll International Components for Unicode 2008/03/20-16:33:10 Build gtlib_1.1 CL#7223
icudt42.dll International Components for Unicode 4, 2, 0, 0
icuin42.dll International Components for Unicode 4, 2, 0, 0
icuuc42.dll International Components for Unicode 4, 2, 0, 0
image_flow.dll AIF 1.0 53.352475
image_runtime.dll AIF 1.0 53.352475
JP2KLib.dll JP2KLib 2008/06/11-20:19:53 53.100857 53.100857
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
MPS.dll MPS 2008/07/07-10:33:04 53.350311 53.350311
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
onOneActivationToolbox.dll onOneActivationToolbox 1.0.1
onOneToolbox2.dll onOne Toolbox2 Dynamic Link Library 2.2.0
onOneWelcomeDialog.dll Essentials 1.0.0.1
OnOneWidgets.dll OnOneWidgets dll 2.5
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS4 CS4
Plugin.dll Adobe Photoshop CS4 CS4
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 1.0.0.73
PSArt.dll Adobe Photoshop CS4 CS4
PSViews.dll Adobe Photoshop CS4 CS4
registration.dll Registration 2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
SCCore.dll ScCore 2008/07/17-13:28:24 53.351316 53.351316
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
WRServices.dll WRServices Friday May 30 2008 7:18:42 Build 0.7713 0.7713
Installed plug-ins:
3D Studio 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
ADM 3.11x01
Accented Edges 11.0
Angled Strokes 11.0
Average 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
BMP 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
BackgroundFilter NO VERSION
Bas Relief 11.0
Camera Raw 5.6
Chalk & Charcoal 11.0
Charcoal 11.0
Chrome 11.0
Cineon 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Clouds 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Collada 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Color Efex Pro 3.0 Complete 3.0.0.4175M
Color Halftone 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Colored Pencil 11.0
CompuServe GIF 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Conté Crayon 11.0
Craquelure 11.0
Crop and Straighten Photos 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Crop and Straighten Photos Filter 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Crosshatch 11.0
Crystallize 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Cutout 11.0
Dark Strokes 11.0
De-Interlace 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Dfine 2.0 NO VERSION
Dicom 11.0
Difference Clouds 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Diffuse Glow 11.0
Displace 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Display NO VERSION
Dry Brush 11.0
Embed Watermark 3.0
Entropy 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Extrude 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
FXG 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
FastCore Routines 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Fibers 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Film Grain 11.0
Filmstrip 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Filter Gallery 11.0
FineStructuresFilter NO VERSION
Fisheye-Hemi 1 (Circle) v1.1.4 1.1.4
Fisheye-Hemi 2 (Full Frame) v1.1.4 1.1.4
Fisheye-Hemi 3 (Cropped) v1.1.4 1.1.4
FocalPoint 2 2.0 (Suite 5.0)
FocalPoint 2 Filter 2.0 (Suite 5.0)
FocalPoint 2 Hidden NO VERSION
FocalPoint 2 Hidden NO VERSION
Fresco 11.0
Fuji Pictrography NO VERSION
Genuine Fractals 6.0 Professional Edition 6.0.4 (Suite 5)
Genuine Fractals 6.0 Professional Edition Batch 6.0.4 (Suite 5)
Genuine Fractals 6.0 Professional Edition Express 6.0.4 (Suite 5)
Genuine Fractals 6.0 Professional Edition Filter 6.0.4 (Suite 5)
Genuine Fractals 6.0 Professional Edition Format 6.0.4 (Suite 5)
Glass 11.0
Glowing Edges 11.0
Google Earth 4 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Grain 11.0
Graphic Pen 11.0
HDRMergeUI 11.0
Halftone NO VERSION
Halftone Pattern 11.0
HotPixelsFilter NO VERSION
IFF Format 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Ink Outlines 11.0
Inkjet NO VERSION
Inkjet: Canon NO VERSION
Inkjet: Epson NO VERSION
Inkjet: HP NO VERSION
Inkjet: Lexmark NO VERSION
Kurtosis 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Lab Photographic NO VERSION
Lens Blur 11.0
Lens Correction 11.0
Lens Flare 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Lighting Effects 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Liquify 11.0
MMXCore Routines 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Mask Pro 4.1 4.1.6 (Suite 5)
Mask Pro 4.1 Select 4.1.6 (Suite 5)
Mask Pro 4.1: Make Work Path 4.1.6 (Suite 5)
Matlab Operation 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Maximum 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Mean 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Measurement Core 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Median 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Mezzotint 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Minimum 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Mosaic Tiles 11.0
Multiprocessor Support 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
NTSC Colors 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Neon Glow 11.0
Nik Selective Tool 2.0.4.2180
Note Paper 11.0
Ocean Ripple 11.0
OpenEXR 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
PCX 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
PNG 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
PTLens 8, 7, 8, 11
Paint Daubs 11.0
Palette Knife 11.0
Patchwork 11.0
Paths to Illustrator 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
PhotoFrame 4.5 Professional Edition 4.5 (Suite 5)
PhotoFrame 4.5 Professional Edition Batch 4.5 (Suite 5)
PhotoFrame 4.5 Professional Edition Hidden 4.5 (Suite 5)
PhotoTools 2.5 Hidden NO VERSION
PhotoTools 2.5 Hidden NO VERSION
PhotoTools 2.5 Professional Edition 2.5 (Suite 5)
PhotoTools 2.5 Professional Edition Batch 2.5 (Suite 5)
PhotoTune 3 3.0 (Suite 5.0)
PhotoTune 3 Filter 3.0 (Suite 5.0)
Photocopy 11.0
Photographic & Dye Sub NO VERSION
Photoshop 3D Engine 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Picture Package Filter 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Pinch 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Pixar 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Plaster 11.0
Plastic Wrap 11.0
Pointillize 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Polar Coordinates 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Portable Bit Map 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Poster Edges 11.0
Radial Blur 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Radiance 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Range 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Raw Presharpening NO VERSION
Read Watermark 3.0
Reticulation 11.0
Ripple 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Rough Pastels 11.0
Save for Web & Devices 11.0
ScriptingSupport 11.0
Send Video Preview to Device 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
ShadowsFilter NO VERSION
Shear 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Silver Efex Pro 3.0.0.751
Skewness 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
SkinFilter NO VERSION
SkyFilter NO VERSION
Smart Blur 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Smudge Stick 11.0
Solarize 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Spatter 11.0
Spherize 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Sponge 11.0
Sprayed Strokes 11.0
Stained Glass 11.0
Stamp 11.0
Standard Deviation 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
StrongNoiseFilter NO VERSION
Sumi-e 11.0
Summation 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Targa 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Texturizer 11.0
Tiles 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Topaz Adjust 3 3, 2, 1, 0
Torn Edges 11.0
Twain Acquire 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Twain Select 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Twirl 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
U3D 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Underpainting 11.0
Vanishing Point 11.0
Variance 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Variations 11.0 (11.0x001)
Video Preview 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Viveza 2 2.0.1.2180
WIA Support 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Water Paper 11.0
Watercolor 11.0
Wave 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Wavefront|OBJ 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Wind 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Wireless Bitmap 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
ZigZag 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
nik Sharpener Pro 2.0 Selective NO VERSION
onOneLibrary 4.0
Plug-ins that failed to load: NONE
Flash:
Channels+Masks
EMailer
onOne
onOne
Treasure Trove
Watermark
Connections
Kuler
Installed TWAIN devices:
WIA-Compact Flash
SilverFast Epson-SE (32 Bit)
EPSON TWAIN 5I agree this is an issue with an Apple DLL. The error you're getting suggests that the wrong version of the DLL is being used. It means that the thing that is rendering the video is expecting the CoreFoundation DLL to have a particular function called CFCreateRepositoryPath but it's not there.
What could be happening is that there are multiple instances of this DLL on the computer and the PATH is leading to the wrong one.
You might search your entire hard-drive and find where the CoreFoundation DLL exists and what version each is. If there is only one version, then perhaps your version of QuickTime is actually too new. Photoshop 11.0.1 came out a long time ago, and the version of QuickTime referred to in the support-ticket-closure response is also pretty old, so maybe the newest QuickTime is using a newer version of the DLL that Photoshop knows how to deal with.
Searching my system for CoreFoundation. there is one smaller version of the DLL in Apple Application Support dated in November and then several larger ones in directories dealing with mobile phones like the iPhone, which I don't have one of, dated a few months earlier.
I'm guessing the iPhone stuff came with iTunes, which I do have installed, though I don't really use it. -
Unable to Render Video in PSCS4 Extended - Error Messages
I am unable to render video it seems. Despite having the latest QuickTime Pro in stalled and all updates to Vista 32 bit and to CS4 Design Premium, I get the following error message:
"The procedure entry point CFCreateApplicationRepositoryPath could not be located in the data link library CoreFoundation.dll"
This happens when, for example, I load 100 medium resolution JPEGs as an image sequence and choose File >Export > Render Video.
If I OK through the error a couple of times I get a screen with output options, but usually some are greyed out. When I CAN put in QuickTime settings and choose export I get the following error:
"Could not complete the Render Video Command because of a program error."
When I have opened a support case it has regularly been closed after being told to get QuickTime 7.2 or higher. GGGrrrr. I have QT 7.6.5 Pro installed.
Any help much appreciated....I do have Premiere Elements 7 installed as well FYI.
Also I have installed the latest Nvidia Driver each time I have tried working with video, had no improvement.
NOTE related thread here that I opened previously on APE7. Am deleting the NVIDIA stuff again and rebooting to test if those Nvidia apps are cause.
http://forums.adobe.com/thread/516453?tstart=0
UPDATED- removing the NVIDIA apps had no effect- same exact errors on trying to File > Export > Render Video
Thanks! System Info below:
Adobe Photoshop Version: 11.0.1 (11.0.1x20090218 [20090218.r.523 2009/02/18:02:00:00 cutoff; r branch])
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Processor speed: 2400 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 9500 GT/PCI/SSE2
OpenGL Drawing: Enabled.
Video Card: NVIDIA GeForce 9500 GT
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver Version: 8.17.11.9562
Built-in memory: 3070 MB
Free memory: 1180 MB
Memory available to Photoshop: 1632 MB
Memory used by Photoshop: 80 %
Image cache levels: 4
Serial number: 92218028076547366530
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS4\
Temporary file path: C:\Users\Phil\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 289.2G, 122.5G free
E:\, 298.1G, 50.0G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2008/08/27-18:10:41 53.355610 53.355610
AdobeLinguistic.dll Adobe Linguisitc Library 4.0.0
AdobeLM.dll AdobeLM 3.0.11.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
AdobeLM_libFNP.dll FLEXnet Publisher (32 bit) 11.5.0.1 build 57427
AdobeOwl.dll Adobe Owl 2008/08/14-18:38:42 2.0.70 53.354161
AdobeOwlCanvas.dll Adobe Owl Canvas 2.0.70 53.354161
AdobePDFL.dll PDFL 2008/08/20-20:15:08 53.204060 53.204060
AdobeUpdater.dll Adobe Updater Library 6.0.0.1452 (BuildVersion: 52.338651; BuildDate: Wed Apr 16 2008 19:28:20) 52.338651
AdobeXMP.dll Adobe XMP Core 4.2.2 53.352624
AdobeXMPFiles.dll Adobe XMP Files 4.2.2 53.352624
AdobeXMPScript.dll Adobe XMP Script 4.2.2 53.352624
adobe_caps.dll Adobe CAPS 2,0,99,0 2.135373
adobe_epic.dll Adobe EPIC 3.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
adobe_eula.dll Adobe EPIC EULA 3.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
AFlamingo.dll AFlamingo 2008/07/09-11:28:44 53.350580 53.350580
AGM.dll AGM 2008/08/27-18:10:41 53.355610 53.355610
ahclient.dll AdobeHelp Dynamic Link Library 1, 3, 12, 0
aif_core.dll AIF 1.0 53.352475
aif_ogl.dll AIF 1.0 53.352475
amtlib.dll AMTLib 2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
amtservices.dll AMTServices 2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
ARE.dll ARE 2008/08/27-18:10:41 53.355610 53.355610
asneu.dll AsnEndUser Dynamic Link Library 1, 6, 0, 8
authplay.dll
AXE8SharedExpat.dll AXE8SharedExpat 2008/06/11-20:19:53 NFR 53.348206 53.348206
AXEDOMCore.dll AXEDOMCore 2008/06/11-20:19:53 53.348206 53.348206
Bib.dll BIB 2008/08/27-18:10:41 53.355610 53.355610
BIBUtils.dll BIBUtils 2008/08/27-18:10:41 53.355610 53.355610
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2009/01/16-10:41:46 53.372607 53.372607
data_flow.dll AIF 1.0 53.352475
ExtendScript.dll ExtendScript 2008/07/17-13:28:24 53.351316 53.351316
FileInfo.dll Adobe XMP FileInfo 4.2.2 53.352624
FNP_Act_Installer.dll FLEXnet Publisher (32 bit) 11.6.0.1 build 60959
icucnv36.dll International Components for Unicode 2008/03/20-16:33:10 Build gtlib_1.1 CL#7223
icudt36.dll International Components for Unicode 2008/03/20-16:33:10 Build gtlib_1.1 CL#7223
icudt42.dll International Components for Unicode 4, 2, 0, 0
icuin42.dll International Components for Unicode 4, 2, 0, 0
icuuc42.dll International Components for Unicode 4, 2, 0, 0
image_flow.dll AIF 1.0 53.352475
image_runtime.dll AIF 1.0 53.352475
JP2KLib.dll JP2KLib 2008/06/11-20:19:53 53.100857 53.100857
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
MPS.dll MPS 2008/07/07-10:33:04 53.350311 53.350311
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
onOneActivationToolbox.dll onOneActivationToolbox 1.0.1
onOneToolbox2.dll onOne Toolbox2 Dynamic Link Library 2.2.0
onOneWelcomeDialog.dll Essentials 1.0.0.1
OnOneWidgets.dll OnOneWidgets dll 2.5
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS4 CS4
Plugin.dll Adobe Photoshop CS4 CS4
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 1.0.0.73
PSArt.dll Adobe Photoshop CS4 CS4
PSViews.dll Adobe Photoshop CS4 CS4
registration.dll Registration 2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
SCCore.dll ScCore 2008/07/17-13:28:24 53.351316 53.351316
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
WRServices.dll WRServices Friday May 30 2008 7:18:42 Build 0.7713 0.7713
Installed plug-ins:
3D Studio 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
ADM 3.11x01
Accented Edges 11.0
Angled Strokes 11.0
Average 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
BMP 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
BackgroundFilter NO VERSION
Bas Relief 11.0
Camera Raw 5.6
Chalk & Charcoal 11.0
Charcoal 11.0
Chrome 11.0
Cineon 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Clouds 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Collada 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Color Efex Pro 3.0 Complete 3.0.0.4175M
Color Halftone 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Colored Pencil 11.0
CompuServe GIF 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Conté Crayon 11.0
Craquelure 11.0
Crop and Straighten Photos 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Crop and Straighten Photos Filter 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Crosshatch 11.0
Crystallize 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Cutout 11.0
Dark Strokes 11.0
De-Interlace 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Dfine 2.0 NO VERSION
Dicom 11.0
Difference Clouds 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Diffuse Glow 11.0
Displace 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Display NO VERSION
Dry Brush 11.0
Embed Watermark 3.0
Entropy 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Extrude 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
FXG 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
FastCore Routines 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Fibers 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Film Grain 11.0
Filmstrip 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Filter Gallery 11.0
FineStructuresFilter NO VERSION
Fisheye-Hemi 1 (Circle) v1.1.4 1.1.4
Fisheye-Hemi 2 (Full Frame) v1.1.4 1.1.4
Fisheye-Hemi 3 (Cropped) v1.1.4 1.1.4
FocalPoint 2 2.0 (Suite 5.0)
FocalPoint 2 Filter 2.0 (Suite 5.0)
FocalPoint 2 Hidden NO VERSION
FocalPoint 2 Hidden NO VERSION
Fresco 11.0
Fuji Pictrography NO VERSION
Genuine Fractals 6.0 Professional Edition 6.0.4 (Suite 5)
Genuine Fractals 6.0 Professional Edition Batch 6.0.4 (Suite 5)
Genuine Fractals 6.0 Professional Edition Express 6.0.4 (Suite 5)
Genuine Fractals 6.0 Professional Edition Filter 6.0.4 (Suite 5)
Genuine Fractals 6.0 Professional Edition Format 6.0.4 (Suite 5)
Glass 11.0
Glowing Edges 11.0
Google Earth 4 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Grain 11.0
Graphic Pen 11.0
HDRMergeUI 11.0
Halftone NO VERSION
Halftone Pattern 11.0
HotPixelsFilter NO VERSION
IFF Format 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Ink Outlines 11.0
Inkjet NO VERSION
Inkjet: Canon NO VERSION
Inkjet: Epson NO VERSION
Inkjet: HP NO VERSION
Inkjet: Lexmark NO VERSION
Kurtosis 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Lab Photographic NO VERSION
Lens Blur 11.0
Lens Correction 11.0
Lens Flare 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Lighting Effects 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Liquify 11.0
MMXCore Routines 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Mask Pro 4.1 4.1.6 (Suite 5)
Mask Pro 4.1 Select 4.1.6 (Suite 5)
Mask Pro 4.1: Make Work Path 4.1.6 (Suite 5)
Matlab Operation 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Maximum 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Mean 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Measurement Core 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Median 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Mezzotint 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Minimum 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Mosaic Tiles 11.0
Multiprocessor Support 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
NTSC Colors 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Neon Glow 11.0
Nik Selective Tool 2.0.4.2180
Note Paper 11.0
Ocean Ripple 11.0
OpenEXR 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
PCX 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
PNG 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
PTLens 8, 7, 8, 11
Paint Daubs 11.0
Palette Knife 11.0
Patchwork 11.0
Paths to Illustrator 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
PhotoFrame 4.5 Professional Edition 4.5 (Suite 5)
PhotoFrame 4.5 Professional Edition Batch 4.5 (Suite 5)
PhotoFrame 4.5 Professional Edition Hidden 4.5 (Suite 5)
PhotoTools 2.5 Hidden NO VERSION
PhotoTools 2.5 Hidden NO VERSION
PhotoTools 2.5 Professional Edition 2.5 (Suite 5)
PhotoTools 2.5 Professional Edition Batch 2.5 (Suite 5)
PhotoTune 3 3.0 (Suite 5.0)
PhotoTune 3 Filter 3.0 (Suite 5.0)
Photocopy 11.0
Photographic & Dye Sub NO VERSION
Photoshop 3D Engine 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Picture Package Filter 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Pinch 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Pixar 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Plaster 11.0
Plastic Wrap 11.0
Pointillize 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Polar Coordinates 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Portable Bit Map 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Poster Edges 11.0
Radial Blur 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Radiance 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Range 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Raw Presharpening NO VERSION
Read Watermark 3.0
Reticulation 11.0
Ripple 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Rough Pastels 11.0
Save for Web & Devices 11.0
ScriptingSupport 11.0
Send Video Preview to Device 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
ShadowsFilter NO VERSION
Shear 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Silver Efex Pro 3.0.0.751
Skewness 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
SkinFilter NO VERSION
SkyFilter NO VERSION
Smart Blur 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Smudge Stick 11.0
Solarize 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Spatter 11.0
Spherize 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Sponge 11.0
Sprayed Strokes 11.0
Stained Glass 11.0
Stamp 11.0
Standard Deviation 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
StrongNoiseFilter NO VERSION
Sumi-e 11.0
Summation 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Targa 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Texturizer 11.0
Tiles 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Topaz Adjust 3 3, 2, 1, 0
Torn Edges 11.0
Twain Acquire 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Twain Select 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Twirl 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
U3D 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Underpainting 11.0
Vanishing Point 11.0
Variance 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Variations 11.0 (11.0x001)
Video Preview 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Viveza 2 2.0.1.2180
WIA Support 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Water Paper 11.0
Watercolor 11.0
Wave 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Wavefront|OBJ 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Wind 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Wireless Bitmap 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
ZigZag 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
nik Sharpener Pro 2.0 Selective NO VERSION
onOneLibrary 4.0
Plug-ins that failed to load: NONE
Flash:
Channels+Masks
EMailer
onOne
onOne
Treasure Trove
Watermark
Connections
Kuler
Installed TWAIN devices:
WIA-Compact Flash
SilverFast Epson-SE (32 Bit)
EPSON TWAIN 5Thanks Peter, I will post there- somehow I could only find the CS forum when posting- I will
look more carefully.
I have not tried going down in QT version...I guess I could find older versions online huh? -
File Error: Unknown File when trying to render a Motion Lower third
I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
Thanks,
JoeWhat's the exact format of the video you're working with and the exact specification the sequence you're editing in?
-
Needing to render PAL-DV in FCP????
Hi,
I had my Sony PC109 stolen and bought a Sony HC26 to replace it temporarily.
Have started to import from it though in FCP and even though both capture settings and sequence settings are DV-PAL 48 KHz, I still have to render straight, unaltered video with effects or anything.
I checked on the camera to make sure it wasn't recording in wide 9:16 mode or anything and it is in standard 4:3.
Basically, whenever I put anything in the timeline, it has a big red line above it indicating I need to render the video. (the audio is fine)
If anyone could help I'd really appreciate it.
Thanks,
CrazyGo to the FINAL CUT PRO Menu and choose EASY SETUP. Choose the DV/PAL option.
Delete Sequence 1. Or any other sequence you have in the Browser. These will have the OLD settings...the ones in place BEFORE you chose the proper Easy Setup.
Create a new sequence. This sequence will have the new settings and should work just fine with your DV/PAL footage.
Shane -
Slow Render with High-End System?
Im currently working on a (in my opinion) high-end Windows system for video editing. The system is about 2 years old and has cost a fortune in that time. So Im expecting significantly better speed. So heres my problem:
Im working primarly in Premiere Pro and After Effects. All the media I work with are as a video imported Jpeg Sequences. Often I have multiple Sequences (up to 7 or 8) overlayed and tweaked with Dissolves and plugins like Twixtor. I also use the Adobe Dynamic Link from After Effects to Premiere and vice versa. All the footage is currently in 1080p but in future I will want to render 4K. Im aware that a 4K workflow is probably a pain in the *** so Im surely going to edit offline with 1080p. However I cant get any real-time playback with all my sequences. I ALWAYS have to render a preview to watch my edits. I dont know if Im just having too high expectations for my system, but Im kinda sure there has to be an issue for this lack of performance. Maybe the Dynamic Link is slowing my system down?
System Specs:
Model : HP Z400 Workstation 103C_53335X
Mainboard : HP 0B4Ch
System BIOS : HP 786G3 v03.15 10/29/2010
RAM : 12GB ECC DIMM DDR3
Processor : Intel(R) Xeon(R) CPU W3530 @ 2.80GHz (4C 3GHz/3GHz, 2.13GHz IMC, 4x 256kB L2, 8MB L3)
Chipset:
HP X58 I/O Hub 2x 2.4GHz (4.79GHz)
HP Core Desktop (Bloomfield) UnCore 2x 2.4GHz (4.79GHz), 3x 4GB ECC DIMM DDR3 1GHz 192-bit
Graphic card : NVIDIA Quadro 4000 (8CU 256SP SM5.0 950MHz, 512kB L2, 2GB 2.81GHz 256-bit, PCIe 2.00 x16)
Harddisks:
4x WDC WD2002FAEX-007BA0 (1TB, RAID10/SATA600, SCSI-4, 3.5", 7200rpm) : 932GB (C:)
Intel Raid 1 Volume (4TB, RAID, SCSI-4) : 4TB (D:)
HL-DT-ST BD-RE BH10LS30 (SATA150, BD-RE, DVD+-RW, CD-RW, 4MB Cache) : k.A. (E:)
Thank you very much in advance for your help and I apologize for any grammatical mistakes since english is not my main language.Valentin,
I have always called a raid10 a solution for the paranoid in a hurry. It takes 4 drives to give you the capacity and performance of two disks, but gives you security by the mirroring.
Before going into your specific situation, allow me to tell something about volumes and drives, because they can be confusing and at the same time they are very important for optimal performance of a system.
Single disk, not partitioned is 1 disk = 1 volume to the OS
Single disk, partitioned is 1 disk = multiple volumes (not a good idea BTW)
Multiple disks in one raid array is Many disks = 1 volume
Multiple disks in one raid array with partitions is Many disks = multiple volumes (not a good idea either)
Each volume has a distinct drive letter for access.
Partitioning is a thing of the past and should not be used at all on modern systems.
You have to think about volumes more than about number of disks. In my current system I have 27 different physical disks but only 4 volumes. In the old one I have 17 disks and 5 volumes.
Now that we are clear what we are talking about, volumes with distinct drive letters, we can address your situation.
You have TWO volumes, C: (single disk) and D: (4 disks in raid10). Spreading the load across two volumes is more demanding and gives slower performance than using more volume, unless one or more volumes are very fast, as I tried to explain in a previous reply (remember Isenfluh/Sulwald?). If you add a SSD as you intend, you have increased the number of volumes to 3, which will definitely help performance, because SSD's are faster than conventional disks, the pagefile can be stored on the SSD, so all your performance will go up.
Compare your setup with mine with rough estimated figures:
Volume
Valentin
Harm
Transfer rate Valentin
Tranfer rate Harm
C:
1 HDD
1 SSD
125 MB/s
450 MB/s
D:
4x Raid10
1 SSD
250 MB/s
450 MB/s
E:
NA
21x Raid30
NA
2,700 MB/s
F:
NA
1 HDD
NA
150 MB/s
These figures are indicative, but do show where the major differences are. In my experience disk setup is overlooked quite often, but has a huge impact on a system's responsiveness. It is the weakest (slowest) link in the chain, afterall and with your workflow, doubly so.
But in your specific case there is something else, and that is your disappointing hardware MPE score. 100 seconds is extremely slow, even for a Quadro 4000. I would be quite normal to see a score around 8 - 9 seconds on such a system, well maybe around 12 - 13 seconds with your ECC memory, but 100 is way too slow. Some background services or processes are interfering with the hand-over from memory-GPU-VRAM-GPU-memory. This can be caused by a myriad of things, but a good starting point would be the BlackViper list of services to set to manual or disabled and taking a closer look at the processes running with Process Explorer. There should normally be less than 50 processes running.
Hope this helps. -
I’m just getting started with Lightroom and if someone can help me I’ll be very appreciative.
I’m using an iMac with a 1TB drive and two external 2.5 TB drives for backup. My active files are on all three drives and I’m running out of room on the iMac drive.
With the smart previews capability of Lightroom 5, I’m hoping to remove all the active files from the iMac drive. I hope to import existing images into the LR catalog from two identical drives with identical folders and have both sets of images reflect the changes I make using smart previews on my iMac.
I just created two identical test folders of junk images on the external drives and was following a beginners tutorial on importing. However, I see nothing about using smart previews on my iMac that, when connected, will update more than one external drive at the same time.
I’m also wondering if, when using smart previews, it matters how I set the render previews during the import process.
Many thanks for any help,
Karl HentzI don't see any way to use smart previews to update both external drives at the same time. The smart previews are linked to a specific set of images. But it seems to me that if both drives are in fact identical, once the catalog is updated when one of those drives is connected those changes should also apply to the files on the other drive. It's actually the catalog that gets updated, not the images. Smart previews and regular import previews are completely unrelated. How you have your import previews configured will have no effect on your smart previews.
Incidentally, in order for my suggestion to work it would be necessary to only have one of those external drives connected. And when the other EHD is connected it would have to have the same drive letter or name. In other words it would have to appear to the iMac that it is precisely the same drive. -
Firefox 6 running under Windows 7 64-bit does not render fonts correctly.
The default sans-serif font for Firefox is Arial. Running Firefox 6 under Windows 7 32-bit, the font renders properly, but under 64-bit Win7, the font is too heavy, and bold or strong makes no difference. I run Win7 64-bit on a laptop computer and use Firefox 5 on it, and the fonts render properly. Possibly a Firefox 6/64-bit problem?
Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
* [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
* [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help] -
SSRS Execution Service Render Method stopped working
Hello SSRS Profis!
I'm having the following Problem:
I was trying to integrate SSRS in my Company-Software, and until today it went quite good:
Its an ASPMVC 5 project with WCF-Services, and in these i had methods to render reports with the help of the ReportExecution - Webservice (2005), the Version of the MSSQL Server we use is 2008R2, reports use stored procedures as data sets.
Everything worked fine, i could render all my reports in the services, gave the result back to the Frontendprojects to present it there, it worked fast and properly.
Until today: For some reason, the call of the ReportExection.Render() - Method gives no more results back.
Debugging shows me that it works approx. the same time as it did before for every report, but the result now is only "null" for every report i integrated until now:
Here is the code I use to execute the service (for network credentials i use a user with administrator privilegue who can access all the reports (tested in private session), Parameter constructio also should work properly because it did before, same
for the Report path...
Any Ideas would be helpful!
private byte[] getPDFFromReport(string ReportPath, Dictionary<string, string> parameterDicitionary)
ReportExecutionService rs = new ReportExecutionService();
// private method to set a user with enough permissions
rs.Credentials = SetServiceAccount();
// Render arguments
byte[] result = null;
string reportPath = ReportPath;
string format = "PDF";
string historyID = null;
string devInfo = @"<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>";
// Prepare report parameter.// mapping Parameters, gives back ReportExecution.ParamaterValue Array, still works as it should
ParameterValue[] parameters = SetReportParameters(reportPath, parameterDicitionary); DataSourceCredentials[] credentials = null;
string showHideToggle = null;
string encoding;
string mimeType;
string extension;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;
string[] streamIDs = null;
ExecutionInfo execInfo = new ExecutionInfo();
ExecutionHeader execHeader = new ExecutionHeader();
rs.ExecutionHeaderValue = execHeader;
execInfo = rs.LoadReport(reportPath, historyID);
rs.SetExecutionParameters(parameters, "de-de");
// rs.Timeout = 300000;
String SessionId = rs.ExecutionHeaderValue.ExecutionID;
Console.WriteLine("SessionID: {0}", rs.ExecutionHeaderValue.ExecutionID);
try
result = rs.Render(format, devInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
execInfo = rs.GetExecutionInfo();
Console.WriteLine("Execution date and time: {0}", execInfo.ExecutionDateTime);
catch (SoapException e)
Console.WriteLine(e.Detail.OuterXml);
// Write the contents of the report to an MHTML file.
return result;
Edit:
I tested the methods with the same user in an WindowsForms Project and got a result. In a former Version, it also still works. I changed nothing since the last deploy in this methods, so can't imagine why it suddenly stopped working....Found the solution!
After checking team-foundation-changelogs of the last checkins, it turned out that somehow automatically some value in the reference.cs of the reportexecution - webservice was changed from:
[return: System.Xml.Serialization.XmlElementAttribute("Result", DataType="base64Binary")]
to
[return: System.Xml.Serialization.XmlElementAttribute("Value", DataType="base64Binary")]
After deleting and readding the webreference to the Project, it worked again.
The next Thing to Research for me is how it can be, that this value automatically changes. Possibly because of different Versions of VS in the dev-Team.. (Ultimate and premium) In any case, this issue is solved, thank you for reading :)
Maybe you are looking for
-
How can i do the following in oracle reports
Hi, I have a query that can give me details of the commission for my clients branchwise. We can put the duration, e.g. January, 2009 to June, 2009, which gives me the result for sum of this duration. and in one single column. My concern here is how c
-
In need of an beginning/inter level BC4J tutorial
I have been looking for some beginning/intermediate level tutorial(s) and/or information for BC4J. The BC4J tutorials included with Jdeveloper have been a good starting point for understanding the basics. However, I have not found a simple tutorial/i
-
Invoice - No doc. Output Error
Dear Friends, When I create Invoice in REFX, it shows Temporary Invoice only. And I could not take print the saved Invoices. The Error messages are: 1) No document output; see error log 0000000186 Message no. RECPSF161 2) SAP ArchiveLink: Storage
-
Objects/records with 8i collections
I have read all the documentation and it seems that the only way to bulk collect multiple columns into records or objects using the 8i PL/SQL compiler is using individual nested tables/varrays per column. Is this true or does any clever developer out
-
Is there a setting for template BOM's which allows the BOM item to be displayed in a sales document, be defaults the item sell price to 0, regardless of the price list it is linked too?