Rendered files for hardware output?

I'd like to get the best results possible when "playing out" a given Premiere sequence through my Kona LHi. I'm particularly
interested in optimizing downconversion (HD-SD) via hardware. If there are differences between "preview" output and "play"
output, I'd like to know what effect that has on a hardware "playout".
Given a sequence that doesn't need rendering, I have the Pr program monitor set for high quality, full res, full speed, and
have the player set to AJA. Clicking the "play" arrow, I'm able to output the sequence from Premiere, and capture the down-
converted video on a second PC. Very good results!
My question / concern is more related to the case when rendering might be necessary, such as when there is a yellow or red
line above the sequence. Under this circumstance, if the sequence is rendered, will the output to the Kona LHi be degraded,
or just as good as a sequence that doesn't need rendering?
So, if a render IS required, might I be better off exporting a DI file, re-importing the DI, then outputing the DI through the hardware? Or, would letting Premiere create the preview (render file?), and outputting the preview through the hardware be just as good?
Comments will be appreciated...Ben
My setup is...
CS5.5
win 7 / 64
i7 3930K
X79 chip set
16 G ram
GTX570
Areca ARC-1213-4I
Kona LHi
drive 1: win 7, apps
drive 2: media, project files (Areca raid 3)
drive 3: media cache, media cache database, win 7 swap
drive 4: preview files

Oh wow, that was difficult to find. Even after you told me, I was searching for a couple minutes trying to figure if it was in the main window, or the preferences... but finally found it in the export settings (to those others looking).
I tried to search for this answer in the online help and couldn't find it.
wow
oh and thanks

Similar Messages

Help locating rendered files for relinking after a crash.

I am working on an adobe premier pro project and my computer crashed yesterday. the project file no longer opens as it is asking where certain rendered files are located... I do not know where premier is hiding them so when I hit skip or try to offline them the project tries to open and it freezes up. I was able to open an auto save file but now the project runs very very slowly... every click or action takes the computer about 2 minutes to respond and if I click while it is thinking... it crashes.
HPZ400 workstation
win 7
CS5

Maybe a shot in the dark, but did you at anytime change your project scratch disk settings at any time. If not maybe have a look at the Default folder for scratch disk settings. Can't remember exactly where it is but it will be on your boot drive under user/ your name or failing that try relocating it by copying the file asked for when PP loads and do a search on your entire machine. This may reveal something usefull like a location where stuff has been saved.
Hope that helps.
Dave.

Validating against schema file for the output XML file

Hi,
I am using XSLT for mapping. The output message is generated according to the mappings but it is not validate aganist schema of target . I am using xsd file from external defination section as target. Can any body help me in this regard.
Thanks,
Mallikarjun.M

hi,
if you talk about the schema of a target message type
than validation only works if you use graphical
message mapping
not with: xslt,java, abap
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

Using Custom XSLT File for html output file

Hi all
I have probably rather a silly question but I have not found a solution yet.
I would like to use a custom XSLT file, which I already have and is working, within a Biztalk Map. The custom XSLT is generating a html file out of an xml file. However I'm not able to succeed so far because I have probably some issues in defining the correct
target schema.
The output that I get at the moment is just a duplicate of the input, probably because I have used the schema for source and target.
So my question is, how do I create a html file out of an xml with a custom XSLT file?
Sorry if this is a nooby question but I couldn't find an answer.

Hi Jerome,
Sorry, your question is not very clear. "I would like to use a custom XSLT file, which I already have and is working, within a BizTalk Map. The custom XSLT is generating a html file out of an xml file" - You have an XSLT which you use for map and how
its generating a HTML file? Are you using something like this?
Changing an XML Response to an HTML output using a Map
If your requirement is to output the html file from the received XML file using XSLT, then use a custom pipeline at send port like XSLT Transform Component and provide the XST which would change the XML to HTML. Here is an example of an XST which I have
used in the past, which converts the received OrderResponse XML to nicely formatted HTML.
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://biztalk.orderapp.schemas.OrderResponse">
<xsl:template match="/">
<html>
<body>
<TABLE BORDER="0" cellspacing="2" cellpadding="2" width="90%">
<xsl:apply-templates select="/ns0:OrderResponse"/>
</TABLE>
</body>
</html>
</xsl:template>
<xsl:template match="/ns0:OrderResponse">
<TR>
<TD colspan="8" align="center">
<H1>Order Confirmation</H1>
</TD>
</TR>
<TR>
<TD colspan="2">
<B>Order no : </B>
</TD>
<TD colspan="6" align="left">
<xsl:value-of select="ns0:OrderHeader/ns0:OrderNumber/text()"/>
</TD>
</TR>
<TR>
<TD colspan="2">
<B>Supplier : </B>
</TD>
<TD colspan="6" align="left">
<xsl:value-of select="ns0:SupplierDetails/ns0:SupplierName/text()"/>
</TD>
</TR>
<TR>
<TD colspan="2">
<B>Supplier Order no : </B>
</TD>
<TD colspan="6" align="left">
<xsl:value-of select="ns0:SupplierDetails/ns0:SupplierOrderNumber/text()"/>
</TD>
</TR>
<TR>
<TD colspan="2">
<B>Account no : </B>
</TD>
<TD colspan="6" align="left">
<xsl:value-of select="ns0:OrderHeader/ns0:CustomerAccountNumber/text()"/>
</TD>
</TR>
<TR>
<TD colspan="2">
<B>Order date : </B>
</TD>
<TD colspan="6" align="left">
<xsl:value-of select="ns0:OrderHeader/ns0:OriginalOrderCreationDate/text()"/>
</TD>
</TR>
<TR>
<TD colspan="2">
<B>Delivery date : </B>
</TD>
<TD colspan="6" align="left">
<xsl:value-of select="ns0:OrderHeader/ns0:DeliveryDate/text()"/>
</TD>
</TR>
<TR>
<TD colspan="2">
<B>Order Status : </B>
</TD>
<TD colspan="6" align="left">
<xsl:value-of select="ns0:OrderHeader/ns0:OrderStatus/text()"/>
</TD>
</TR>
<TR>
<TD colspan="8">
<BR></BR>
</TD>
</TR>
<TR>
<TD valign="top">
<B>Line</B>
</TD>
<TD valign="top">
<B>Code</B>
</TD>
<TD valign="top">
<B>UOM</B>
</TD>
<TD valign="top">
<B>
Avail<BR></BR>Qty
</B>
</TD>
<TD valign="top">
<B>
Line<BR></BR>Price
</B>
</TD>
<TD valign="top">
<B>
Line<BR></BR>Status
</B>
</TD>
</TR>
<xsl:for-each select="ns0:LineItems">
<xsl:for-each select="ns0:LineItem">
<TR>
<TD valign="top">
<xsl:value-of select="ns0:LineNumber/text()"/>
</TD>
<TD valign="top">
<xsl:value-of select="ns0:ProductCode/text()"/>
</TD>
<TD valign="top">
<xsl:value-of select="ns0:UnitOfMeasure/text()"/>
</TD>
<TD valign="top">
<xsl:value-of select="ns0:Quantity/text()"/>
</TD>
<TD valign="top">
<xsl:value-of select="ns0:UnitPrice/text()" />
</TD>
<TD valign="top">
<xsl:value-of select="ns0:LineStatus/text()" />
</TD>
</TR>
</xsl:for-each>
</xsl:for-each>
<TR>
<TD colspan="8">
<BR></BR>
</TD>
</TR>
</xsl:template>
</xsl:stylesheet>
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

4k RED files for 1080 output - Workflow question

Hello Forum,
I am cutting a project shot in 4k that needs a 1080 master for broadcast.
As I normally cut in 1080, what is the best way to setup my sequence for this project?
If I use a 4k sequence, I cannot get picture on my 1080 client monitor. (blackmagic intensity pro)
What are the pros/cons of using "default scale" option for this type of project?
Thanks all!
- Ryan

Thanks All!
I won't need to output 4k, so I am ok there.
I just wanted to verify this is the proper workflow.
My system can handle editing 4k, its my client monitor. It is a Flanders 1080p monitor. For some reason, Premiere won't let me reference 1080 to my external monitor in a 4k timeline. I believe, FCP7 used to give you the option to external monitor any resolution you wanted, regardless of sequence settings.
Do I need to get a different blackmagic card or something?
Thanks!
- Ryan

Best practices - Optimizing FLA files for SWF output

This question was posted in response to the following article: http://help.adobe.com/en_US/flash/cs/using/WSd60f23110762d6b883b18f10cb1fe1af6-7b23a.html

Good catch, Amy. I've asked someone on the Flash Pro doc team to fix this.
My apologies for wasting your time.
Thanks,
Randy Nielsen
Senior Content and Community Manager
Adobe Systems Incorporated

PDF File with the Output screen shot

Hello experts,
In my custom program, i want to generate the PDF file for the output List screen. i.e. when i run program, generated Output list screen itself is to be captured into a PDF file and PDF file should be saved at predefined Local system.
Is it possible? and if yes then please give me some suggestion.
Thanks in advance
Regards
Jagesh

hii jagesh,
first take all the field you are displaying in an internal table and den call FM GUI_DOWNLOAD.
ALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'D:\salesdata.txt'/.xls----
> path where u want to download o/p on your desktop
      filetype                = 'ASC'
      append                  = 'X'
      write_field_separator   = 'X'
    TABLES
      data_tab                = gi_sales_order_display------- internal table you r fetching the data
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.
regards,
Shweta

PE12 - "Deleting Rendered Files" Confusion...

Thanks in advance for any assistance from anybody!
If i click on "Delete Rendered Files For All Projects"...does that delete rendered files even to the point of deleting my final video creations that i have "saved" or "saved as" in the program itself???
In other words do i run the risk of losing the videos i've created in PE12 if i proceed with a "Delete Rendered Files For All Projects" command???
Why are rendered files even kept and consume computer memory...i thought it was only a procedure to catch up with itself and make the video you are working on play more smoothly.
Many thanks again...

You are correct is saying that rendered files make the video play more smoothly.
Rendered files are preview files, when you edit a portion of your timeline(like apply effect, transition, etc.) you will see a somewhat jerky and blurry playback, to have a look at how your final video will look and play you can render only a small portion by setting the workbar area over that area. It will obviously take less time than exporting the whole video every time you make an edit.

After Effects Error: rendering error while writing to file...Output Module failed - 1610153646

Hi – I’m currently working with someone who is running After Effects 5.5v10.5.0.253 on a PC which is running Windows 7 Ultimate. The computer has just recently been built and the software is newly installed. (ie. a couple of weeks old, max). Up until now, we have been using After Effects with no real issues. But tonight, we started to see the following error message, when trying to render something out:
“After Effects Error: rendering error while writing to file xxxxx. Output Module failed, the file may be damaged or corrupted -1610153646” – displayed during render, which meant the render failed.”
We started to review forums to see if we could come up with a fix and tried a few of the more common suggested solutions, including:
Make sure there are no third-party plug-ins or Windows incompatible elements installed - as it’s a pretty new install, we haven’t added anything except out-of-the box elements.
Clear the render queue – did this, no change.
Reinstall Quicktime – did this, no change.
Reinstall Creative Suite – also no change.
Check the default program to open .mov files is Quicktime – Quicktime was already the default.
A bit more detail about the machine...
Ram is 32gb
GPU is GeForce GTX 660ti
250gb soild states
2tb raid drive
Any help would be much appreciated. This is now happening on all AE files, even files that worked fine earlier in the week. Other than the AE and QT reinstalls mentioned above, nothing new has been added to the machine this week. On a deadline – so a quick response would be amazing, right about now. Thanks.

Hi Mylenium- thx for the quick response. We have have tried a bunch of different settings. AVIs work and we can do image sequences too. The only major problem seems to be with Quicktime files. While I appreciate your suggetion to convert with AME - this is only a workaround. Was really hoping for a solution that will fix the problem in After Effects? Heard rumor from a few friends in the biz, that this is a major bug... if possible, some feedback from Adobe product devs or someone with a technical background would be great! Thx.

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Downloaded the output file for bridge, but still can't find output option in bridge?

I bought photo shop for a photography class and was told I needed to install the output plug-in in order to make a PDF file for the class assignments. I followed the steps and put it in the correct folder but it still isn't showing up as an option when I go to change my workspace. This is getting aggravating.

Thanks Kirk...found it buried in Edit, Preferences.

Get MUTLIPLE output files for SINGLE input file with multiple records

Hi ,
I have source xml file which has multiple records in it and I want to get multiple seperate flat files for it.
this is my source structure
<root>
<Header1 fld1=1234 fld2="name1" fld3='SAP1"
fld4='000" fld5=0 fld6="sdn1"></header>...............no line items here
<Header2 fld1=123 fld2="name" fld3='SAP"
fld4='00" fld5=0 fld6="sdn" ><line fld7=value1 fld8=value2 fld9=value3 /line><line fld7=value4 fld8=value5 fld9=value6 /line></header>.....two line items here
<Header3 fld1=123 fld2="name" fld3='SAP"
fld4='00" fld5=0 fld6="sdn" ><line fld7=value7 fld8=value8 fld9=value9 /line></header>......one line item here
Header4 fld1=12345 fld2="name2" fld3='SAP2"
fld4='0006" fld5=01 fld6="sdn2"</header>.......no line items here
</root>
I am trying to get flat files as many time the <b>header</b> values occur that many target files should appear in the target.
like
file1:
1234name1SAP10000~sdn1
file2:
123nameSAp000~sdn
value1value2valu3
valu4value5value6
file3:
123namesap000~sdn
value7valu8value9
file4:
12345name2SAP2000601~SDN2
here I have 4 headers so i need to get 4 output files ,similarly for 'n' headers I need to get 'n' output flat files. the above mentioned source xml file is just one file,like that I might get somany sourc xml files which has similar structure in it.
and also it is important to get the line items,if exists to the header, for the corresponding headers.
how can I achieve this?do I need to use BPM or any mappings other than Graphical?
please suggest me.
thank you.
Babu
sorry,output file structure changed
Babu

Babu,
See the Mapping and the logic.
Make sure your target message occurrence:http://www.flickr.com/photo_zoom.gne?id=1412748793&size=o
Check out for source and target structure
http://www.flickr.com/photo_zoom.gne?id=1412748803&size=o
http://www.flickr.com/photo_zoom.gne?id=1412748809&size=o
http://www.flickr.com/photo_zoom.gne?id=1412748815&size=o
http://www.flickr.com/photo_zoom.gne?id=1412748825&size=o
Results:http://www.flickr.com/photo_zoom.gne?id=1412748799&size=o
Note:
While creating Interface determination choose it as Enhanced/Extended
The Receiver Content conversion - For field separator and line separator give 'nl' , coz we concatenated all of them using ~ in mapping.
If you find any discrepancy in the above logic , please let me know.
raj.

The output file for your concurrent request is not initialized

Application: Application Object Library(FND)
Component Type: SERVICE_INSTANCE
Component Name: Standard Manager(STANDARD)
/*The output file for your concurrent request is not initialized.
Cause: Your concurrent program execution was not preceded by calls to standard
Application Object Library routines to initialize concurrent processing. FDPFOP
received a return code of failure.
Action: Change your concurrent program to initialize files by calling standard
Application Object Library routines. */
I got the mail with the above message from System ( Oracle Applicaitons Release 12.1.1)
I have checked the following metalink document
The Output File For Your Concurrent Request is Not Initialized: FDPFOP received a return code of failure [ID 296830.1]
I can not undestand, why the alert sends mail?
Could you please let me know..what happened to standard manager? how to resolve the above issue? why the above alert happened?
The above meatlink note did not help much....

Hi;
>
/*The output file for your concurrent request is not initialized.
Cause: Your concurrent program execution was not preceded by calls to standard
Application Object Library routines to initialize concurrent processing. FDPFOP
received a return code of failure.
Action: Change your concurrent program to initialize files by calling standard
Application Object Library routines. */
The Output File For Your Concurrent Request is Not Initialized: FDPFOP received a return code of failure [ID 296830.1]
I can not undestand, why the alert sends mail? Could you please let me know..what happened to standard manager? how to resolve the above issue? why the above alert happened?I checked related note and it mention its internal bug which mean we cant say too many thing about issue.
The above meatlink note did not help much....It helped or not? Issue still appear or not?
Please run adadmin utulity >> from Maintain Applications Files>> Relink Applications programs
Be sure it wont through any error message than retest issue
Regard
Helios

Rendering Lo-Res files for inspection by stock agency questions.

*Using FCE 4.* My stock photo agency is requesting videos now. I'm using a Canon 5D Mark II.
What I want to do is to render low-resolution clips for the agency inspection. They will choose from the LR clips and I will then supply HR files for submission.
I have been trying to render the lowest possible resolution files for submission and the files are ending up mostly rendered without audio. I'm sure it's something simple I'm missing but I can't seem to drink enough coffee to absorb what I'm missing from the digital manual or Tom Wolsky's book.
That would be two questions: what settings will give me the lowest possible file size for agency inspection and how do I make sure the audio is included in the rendered LR files?
I appreciate any help on this and I hope to bring my skill level up quickly over the next couple of months. Now I know how Photoshop beginners feel. I grew up with PS but video is a whole new world for me.
Fred

Bonjour (Hi)!
(I assume that the audio is enabled in your sequence)
So your sequence is an HD one.
_FOR DATA DV or HARD DRIVE ARCHIVE_, same process (altough you can keep the original 1920X1080 for hard drive way):
The simplest way is to export the sequence with the correct aspect ratio (16:9) to a smaller frame size.
1920X1080 gives a such ratio as 640X360.
To reduce your frame size to 640X320, no other choice than using "export->using quicktime conversion" in file menu.
In the Save window dialog, choose "Quicktime movie" in the local format menu. Click on Options to get access to desired settings like frame size, codec, etc.
In *Movie settings window* :
For video: click settings to open the *Standard video compression setting window* and choose the codec (here MPEG 4) in Compression local menu (there is a selector for compressor quality, maximum data rate.
Click OK to confirm the codec choice for video in *Standard video compression setting window*.
In *Movie settings window* select Size to get access to *Export size settings* window. There are some presets included but you can enter custom values here. Set frame dimension as you need, but keep in mind to choose numbers that have a 16:9 ratio like 640X320 or other one.
Desinterlace is a good option if your work with interlaced source material.
Click OK to confirm the frame size for video in *Export size settings* window.
For audio: click settings to get access to *Sound settings* window and choose the audio codec etc, Linear PCM at 48 kHz stereo give your the best audio from FCE. As you distribute on DATA DVD or hard drive, audio size is not an issue here.
Confirm the codec choice with OK key in *Sound settings* window.
Confirm the video and audio setting by clicking OK in the *Movie settings* window.
In the Save window, name the exported movie, select a destination to save and click Save.
The resulting file will a compressed one with all option selected. This movie is suitable for DATA DVD burning or Hard drive usage.
TIP: There is some compression presets included in the Save window at format local menu. iPhone or Apple TV are efficient ones.
Look at those links about video compression:
http://www.kenstone.net/fcphomepage/qt_h-264_moviesfcp.html
http://www.kenstone.net/fcphomepage/qt_movies_fromfcp.html
http://www.kenstone.net/fcphomepage/video_to_ipodstone.html
To produce a _STANDARD DEFINITION WIDESCREEN DVD_:
Simply use the export-->quicktime movie in file menu. Select audio and video content in the Save window local menu. Check "self contained" and a destination for the movie.
To authoring the DVD, you can use iDVD:
there is an issue with wide screen content, see:
http://www.fcpbook.com/Video9.html
The other way to resolve this problem is to use Quicktime player PRO, open your wide screen exported movie and set the correct *Aperture playback* option for video track in Movie properties window (use Command-J to get this window in quicktime player PRO). Save the new version of the movie once this option selected.
Drag your exported movie in a *wide screen iDVD project* and burn your project. iDVD will handle the frame size reduction and the compression for DVD usage. You don't have to choose option here.
Or
Use Roxio Toast, or Compressor if you own it (included with Final Cut Studio 2).
The resulting DVD will be a *Standard definition wide screen* one (720X480). IMO, it's not the better way to go for material screening by agency as this DVD will have to be played with DVD player application from a computer or with a DVD player hooked on a TV set.
NB: To burn a Blu-Ray DVD you can use Roxio Toast with the correct Roxio plugin, but it' difficult to get a BR DVD burner right now. You can use standard def DVD blank to get a BR of 20 minutes in lenght. Search this forum with "Toast Blu-Ray DVD keywords.
Michel Boissonneault

Output files for Web Help

I am new to Robohelp. I am using Robohelp 8 and FrameMaker 9 for TC 2 on Windows XP.
Previously I used Webworks Publisher 2003 to convert my project and the output was put into one folder. I'm having difficultly figuring out how to do that with Robohelp 8. Right now it is putting each converted page in a separate subfolder with a *.css file. I don't even need the *.css file for each file because I just use one *.css file for the whole project.
So, for example, if I convert a FrameMaker book called BigBook.book and it has these files:
-ScreenA.fm
-ScreenB.fm
-ScreenC.fm
Then, I want Robohelp to put all of the converted book files in a folder called "Output" with the names:
-ScreenA.htm
-ScreenB.htm
-ScreenC.htm
Why? This help is contextual and I hand it over to the developers for the help. When the end-user clicks the help button, the GUI has a script that looks in one folder for a *.htm file that matches the *.jsp file of the GUI.
Sorry if this has been asked before. I looked around, but I could not find anything.
Thanks,
M.Hess

Welcome to the RH forums.
Can you clarify for us whether you are linking a FrameMaker document to your RoboHelp project and updating the content, or importing your FrameMaker documents? It sounds like the later.
In this case, what you can do is create a folder in your RoboHelp project called "Output". Before you import your FrameMaker documents, select this folder in your Project Manager pod. This ensures that any imported files are placed inside that directory. As you already have files you've imported, you can move them to a directory as you see fit. Just create an "Output" folder and click and drag the files into it in the Project Manager pod.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Rendered files for hardware output?

Similar Messages

Maybe you are looking for