Rendered text looks OK in premiere pro, but is poor quality when exported - why?

I have done a nice text animation in after effects.  Just a simple character by character fade on.
It looks good in AE, and when I import and preview it in Premiere Pro, it looks equally nice.
However, when I export it to a (high bit rate WMV), it looks poor and blocky.
All the other non-animated text looks fine.    Why is this happening?
(I have CS3)

Well, with the information to hand I'm out of ideas.  I'd need more data to go further.  If you'd care to upload the export, I can take a look here, see what you see.
https://www.depositfiles.com/en/

Similar Messages

  • Premiere Pro CS3: bad video quality when exporting for YouTube

    Hi!
    I'm a newbie to this forum and yes, I've looked for an answer before posting. I'm also pretty new to Premiere Pro and I hope that the problem I'm having is more my fault than Premiere's (it most likely is.)
    I have project, a little YouTube-Video. But whenever I export it, the quality is really poor. I've also tried rendering it with Windows Movie maker and, strangely enough, the quality is much better and closer to the original file. My big question is: what am I doing wrong?
    Here are some additional info:
    Adobe Premiere Pro CS3
    Windows 7 Professional, 32 Bit (PC)
    The movie file was shot with a Sony DSC-W170 and is an .mpg file
    Video:
    640x480
    10418kBit/s (total: 10483 kBit/s)
    30fps
    Audio:
    64kBit/s
    Mono
    32kHZ
    Project settings: DV-Pal
    Standard-PAL-Video (4:3 Interlaced).
    48 kHz (16 Bit) Audio
    I used the Adobe Media Encoder for the export, H.264/YouTube. I've also tried several other settings, but I never get as good a result as with the Windows Movie maker. Can anyone please tell me how I can fix this? (Maybe the quality of the video already suffers when I import the files into Premiere Pro? The video in the source and the cutting window is very blurry.)
    Here you can see for yourself what it looks like:
    File rendered with Adobe Premiere CS3: http://www.youtube.com/watch?v=LTAyx6O27Dg
    File rendered with Windows Movie Maker: http://www.youtube.com/watch?v=AVeoUOfM_uo&feature=youtu.be
    I hope somebody can help me. If you need additional info which I haven't provided, ask away. Thank you so much in advance for your replies!

    YT is set to privet.
    Keep project settings and export settings same as camera.
    Try H.264 (mp4) for export instead.

  • Premiere Pro CS5 - Media Encoder Crash when Exporting to MPEG-2

    System:
    Core i7 920 @ 3.8 Ghz
    Gigabyte X58A-UD3R
    12GB DDR3 1600
    External Sound Card - M-Audio ProFire 610
    OS Drive - 2x300GB WD Raptors - Raid 0
    Project Drives - 3x300 WD Raptor - Raid 0
    Video Card - Geforce GTX 285 1GB
    Adobe Premiere Pro CS5 and Media Encoder CS5 continually crashes or hangs every time I try to export to MPEG-2.  I can successfully render to every other codec without any issue, but need the MPEG-2 for an Adobe Encore Project.
    The project is approximately 38 minutes long and contains AVI and MP4 files, all of which were ripped from DVDs as I'm producing a reel for a producer who provided his DVDs for me to rip and use as content.
    Possible issues:
    1.   Currently have Magic DVD Ripper and DVD Fab installed (codec conflicts?)
    2.   Originally ripped the DVDs at 630x360 (my mistake - hadn't really worked with a DVD ripper before and was the largest avi pre-set) and I'm exporting to MPEG-2 standard 720x480 Widescreen)  (I know I should've just ripped them as the original lossless MPEG-2 files - I'm a tool)
    2.   Blank space in the timline (there are a number of these)
    I would like to get some input before I try to export to MPEG-2 again as I blew a capacitor on my old mother board (Gigabyte x58-ud3r) after I had gotten my computer to start rendering a MPEG-2 after about 50 tries to export/launch media encoder set on MPEG-2.  I just installed my new motherboard to replace it.  Clearly MPEG-2 taxes the system more so than any other codec (from what I can tell).  However, I thought the issue with the blank space/no media in the timeline was fixed with CS5.  I saw in a previous post that someone thought that ffdshow was conflicting with AME.  I don't have ffdshow, but I believe that's a ripper program like Magic and DVDFab.

    I experienced this at one point.  Searching the WEB I saw suggestions that there was a problem with a recent version of Quicktime.  (I have no idea why the quicktime player would have an impact.)  However, reverting to an earlier version of Quicktime fixed the problem.  Search this board using quicktime as a search phase.  The quicktime web site allows you to download the earlier versions.  I'm not at my editing machine, but I believe that I am at version 7.5.2.

  • Premiere Pro cs5 freezing my computer when exporting

    I'm editing using .mts files.  I've a sequences just about two - three minutes long.  I try exporting 1080p h264 mode and more than half way of encoding my computer just freezes!!!
    Computer specs:
    4 gig ram
    2.81 ghz processor
    Nvidia Geforce 8600 gts
    I'm running a desktop.

    >OR should I download some additional content from the web-site to install the MPEG codes and there by enabling support to Premiere Pro?
    You may install anything you want (but I personally would not, unless I was 100% sure of the source) and the trial version STILL will not work with any MPEG codec
    The trial has a built-in "lock out" that prohibits using MPEG, no matter what else you have on your computer

  • Premiere Pro CS3 for Mac quits when exporting

    I'm using Premiere CS3 for Mac and I imported several mpeg footage I took with my Sony Cybershot camera. The videos are in 640x480, but when I opened a new project I choose 720x480 DV format. Then the videos were stretched to the DV size.
    When I try to export my timeline, the render dialog shows 'compiling...' and nothing happens with the progress bar and Premiere is suddenly closed.
    I took one of the videos and rendered it as Quicktime movie 720x480 in AFX, and then I created another timeline with this new video and the export worked fine.
    I think the problem is the MPEG format that my CyberShot uses. Am I right?

    Yes.

  • Adobe Premiere Pro CC crashing Windows 7 when exporting.

    I am running on a Windows 7 64bit, AMD 8350, 32GB RAM, and a EVGA 660 SC. I am trying to export 1080p at 60FPS, I have tried using CUDA and no CUDA rendering acceleration, and a few minuets into the exporting process I get a hard crash and have to reboot my PC. I have re-installed it on different drives and just completely re-installing it, yet it still makes my PC crash, any help or tips?
    Thanks

    Hi Nitehawkof230,
    nitehawkof230 wrote:
    I am running on a Windows 7 64bit, AMD 8350, 32GB RAM, and a EVGA 660 SC. I am trying to export 1080p at 60FPS, I have tried using CUDA and no CUDA rendering acceleration, and a few minuets into the exporting process I get a hard crash and have to reboot my PC. I have re-installed it on different drives and just completely re-installing it, yet it still makes my PC crash, any help or tips?
    Thanks
    Are you crashing at the same point and time in your export every time, or does it vary?
    Thanks,
    Kevin

  • Want to try trial for Premiere Pro but for some reason the apps tab says "download error please contact customer support"

    Want to try trial for Premiere Pro but for some reason the apps tab says "download error please contact customer support"

    Kbubello for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  • I try to download my premiere pro, but the installation is interupted at 84%, stating "installation completed though some optional components failed to download correctly (6). Please help!!!!

    i try to download my premiere pro, but the installation is interupted at 84%, stating "installation completed though some optional components failed to download correctly (6). Please help!!!!
    I purchased this tonight and im debating having a refund!

    You may want to try using the Adobe Cleaner Tool and try downloading again:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • After my trial version, i bought a month licence for premiere pro, but i cant get the serial number to activate it

    after my trial version, i bought a month licence for premiere pro, but i cant get the serial number to activate it

    There are no serial numbers for CC plans.
    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

    I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
    I hope someone can help me with this as I cannot work on any projects.
    thanks.

    Hi john,
    thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
    As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
    This is the info that appears on the screen
    I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
    Thanks for your help and patience.
    Arantza
    Date: Mon, 23 Apr 2012 09:12:15 -0600
    From: [email protected]
    To: [email protected]
    Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
        Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
        created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Premiere Pro CS5.5 Playback problem (when mtulti tasking) (Mac)

    Hi,
    I have this very weird problem with preimiere pro CS5.5. I've only experienced this today and I've already restarted my mac a number of times and the problem still persists.
    Basically, I start up premiere then work on a project, I can do playback no problem, I scrub through the timeline there is audio working, I press the spacebar, the clips play no problems
    HOWEVER as soon as I switch (cmd-tab) to let's say Firefox or just even leave premiere for another window. Playback stops working, pressing spacebar won't do anything also even clicking the play button on premiere won't work. I would need to start premiere all over again. The program doesn't hang but te playback just stops working, when I scrub through the timeline, the video moves but there is no audio.
    I hope someone can shed light over my problem thanks.
    I have never encountered this problem for over a year ever since working on premiere pro CS5/ CS5.5
    I'm on a iMac 21.5 inch late 2010.

    I just had a similar issue (Mac OS 10.7.3) Premiere Pro CS 5.5.2 was getting very unstable, seemed like it was very sluggish. When I switched to another app, then back to Premiere, pressing Play or spacebar didn't do anything. However if I waited a long time, like a minute, it came back to live. I'm not sure what is going on with my Premiere Pro these days, but it seems like it's gettings slower for me. One thing I do is to use Cocktail to clean the system caches, the reboot, and it seems this temporarily helps Premiere Pro, but after a time it gets boggy again.
    Any advice on what to 'clear' to get PPro in an optimized state? I have a relatively older Mac Pro, 8 core but with 24GB of ram and nVidia 4000. It might be my imagination but it seemed 5.0 and 10.6 was faster and more stable than this, but who knows. Any advice is appreciated.

  • Premiere Pro 6.02: Error/Freeze when moving clips

    After loosing media connections in a current project (http://forums.adobe.com/message/4678615#4678615) here's my next big problem with Premiere Pro 6.02. As soon as I try to move certain clips in a sequence, I get this error message and Premiere Pro freezes:
    These clips play fine, but as soon as I try to move them: bang!
    I de-installed and re-installed Premiere Pro, but that did not help.

    HFS+ Journaled has absolutely no positive effect on individual volumes. It helps data recovery with raid volumes and the OS drive with Time Machine. HFS+ Journaled however does cause allot of issues due to the Meta Data applied to the file system and adds significant performance degrading to drive requests in general. People who use HFS+ Journaled are simply creating far more failure points that will effect their editing experience and time frames. Honestly I see allot of Meta Data based issues on the Mac side in this forum and I would be willing to bet most would go away if the Drives would be formatted to HFS+ Non Journaled and then create a new master directory to copy the data back into to break the Meta Data ties in the volume table. Whether clients follow that advice is up to them. However people cannot hold Adobe at fault for issues caused by partition tables and OS specific functions when there are clear ways those are avoided. If clients are passing Storage media to others that use PC then they definitely want those media formatted HFS+ Non Journaled because right now Mac Drive has allot of issues with that. This is a clear message, to avoid failure follow recommended configuration policies.
    Eric
    ADK

  • PREMIERE PRO CS5.5 Gamma problem while exporting project to mjpeg A or B

    Dear Sir,
    I'm in a big ****. I've directed and edited 1h documentary for Finnish television, also, the technical specs requested by the TV Channel is all production Broadcast masters must be encoded with Apple ProRES codec or MJPEG A or B.
    As i'm working on PC (win7), the ProRES codec doesn't exist on PC system, so i've done the export to MJPEG. The problem is i have a different gamma level when i watch the final export with Quicktime or VLC. Of course i can adjust the level in those players, but it doesnt effect the file. When i import the Qt file into a Premiere sequence, the gamma level is still **** and different from my original level i have from my timeline and preview window. If i export the project to H264 1920x1080p25, then the gamma is perfect with Qt, VLC and WinMedia player. But the TV station don't wanna work with H264. Deadline is on next monday, and i can't send a Qt MJPEG file with wrong gamma !!!Any chance to find a solution to fix it ??? After reading different forum, i can see this problem exist since many years and never been solved.
    What can i do ??
    Denis.

    Things is my prpject includ few effect plugins i bought, so what ever i could find a mac, not your i could export xml project to finalcut with plugins it dont have
    Denis
    Sent from my iPad.
    Le 31 mai 2013 à 15:20, Fuzzy Barsik <[email protected]> a écrit :
    Re: PREMIERE PRO CS5.5 Gamma problem while exporting project to mjpeg A or B
    created by Fuzzy Barsik in Premiere Pro - View the full discussion
    If it were me, I wouldn't encode to MJPEG.
    So as to encode to ProRes on Windows you can utilise any solution based on ffmpeg/ffmbc or better yet find a Mac with Final Cut or Compressor installed for delivering critical work.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5368019#5368019
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5368019#5368019
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5368019#5368019. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Latest Premiere Pro CC 2014 Freezing and crashing. Why?

    While editing a project everything runs smooth for a while, but then PPCC will freeze, become sluggish and or will crash from time to time. I have a new MacPro (Late 2013) 3.5 GHz 6-Core Intel Xeon E5, 64 GB ram, with duel AMD FirePro D700 graphics cards. I purchased my machine a few months ago. in Addition I'm editing off of a Thunderbolt 2 raid SSD drive. SO I don't know why my projects are freezing and crashing. This happens weather I'm editing DSLR 1080 footage Or RED 6K Footage. My system has more than enough power to handle my project, but premiere works for awhile then doesn't play nice. Why? PPCC 2014 by far has the best tools for editors in my opinion but if its not as stable a FCPX then why should we continue to use it. in addition, yes I have done a complete clean install so there should not be any conflicts.Running OS X 10.10.1

    My Premiere Pro CC 2014 also freezes when I try to export. I do not get any error messages, it just freezes and I have to restart my computer. The only way I can render is to Queue to Media Encoder CC 2014.
    I have tried posting my problem many times but this Community Forums will not accept my post and keeps telling me to 'try again later .m4'.

  • Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    I am not aware of a field type "Help" within a PDF form. I do not see it as a form field that can be added in the form edit mode.
    Forms Central forms do not support all the features of Acrobat forms.
    Are you talking about the "Tool Tips" or a hidden field that only shows when one enters a field and is hidden upon exiting the field.

Maybe you are looking for