Rendered video looks differnt than project video black bars in the man viewing area?

rendered video looks differnt than project video black bars in the man viewing area?

When you say "rendered," do you mean hitting the Enter/Return key to produce Rendered files, for smoothest playback, or do you mean once you Export/Share/Publish the Timeline to an output file, the black bars show up?
What version of PrE are you using?
Also, can you give us information on the Video Clips in your Project, such as the camcorder that they came from, the CODEC used, and their Frame Size?
Next, what Project Preset did you choose at New Project?
If you did mean after you have output the Timeline to a file, what were the specs. that you chose for that output file?
Black bars in the output file, or on the Timeline, indicate a mis-match somewhere in the process.
Good luck,
Hunt

Similar Messages

Why would the browser preview display look different than what I am seeing in the design view? Pls help!

When working with accordion panels, when I first insert the widget it looks fine, then I begin customizing the content and then the Preview display does not look the same as the Design display. For instance, in the design display the panel aligns with the adjacent image, but in Preview, it appears offset by one or two pixels.

Hi,
Please take a look at this post with similar discussion : Re: What I see in Design mode is not the same in Preview mode. ?
Regards,
Aish

When I render my video I get a black bar on the left side of the screen

I just upgraded to FCS 2 and so far it's been a complete waste of money. I'm having nothing but problems with FCP, Compressor, and QMaster. I will just post my FCP problem here.
I've edited a weekly video podcast and everything looks great, until I render it and export it. When I render it, I get a constant, solid black bar on the far left of the video that takes up about 5% of the screen. My layers are definitely sized correctly to fill up the entire canvas, and they are all centered. I cannot figure out why I am getting this black bar or how to get rid of it without ditching the upgrade and going back to FCP5.1.
I have already tried completely uninstalling the FCS suite and reinstalling. No luck. Any help would be GREATLY appreciated.

Thanks for the reply.
My original source material is in Apple Intermediate Codec, with 32-bit float audio and a variable frame rate. This has not been friendly to FCP, so I use Quicktime to convert it to Apple ProRes with 24-bit audio and 29.97 frame rate. This is what I import into FCP.
My sequence settings are set to the same specs as my source material. 854x480, square pixels, no field dominance, Apple ProRes compression.
The black bar on the left side of the screen shows up before I even export. It shows up when I render everything.
I am exporting with Quicktime Conversion to:
MP4
h.264 codec
720x405
1000 video bit rate
Main Profile
No cropping/filters or anything.
The ONLY thing I did different before upgrading to FCP6 was that I used Apple Intermediate Codec all the way through. I was told by an FCP instructor that writes and publishes all kinds of FCP training material that I should upgrade to FCP6 and use the Apple ProRes422 Codec instead, so that's what I'm trying to do.
I am going back to restart my project using Apple Intermediate Codec all the way through like I used to, but it will be awhile before I can tell if that solved the problem. Either way, I would like to be using the ProRes codec....
Thoughts?

Small black bars on the top and bottom on video after exporting?

I'm using 1280x720 video footage in Adobe Premiere. The problem is, whenever I export my finished project as 1280x720, the newly rendered file has small black bars on the top and bottom.
These black bars are not there in the Premiere preview, only after the project is rendered.
The video file created after export is still 1280x720(16:9).
Is there any way to get rid of these black bars, as they are quite irritating because I make youtube videos regularly.

FAQ: How do I get rid of black bars around my movie?

When I rotate my video clip so that is isn't viewed sideways, it has black bars on both sides and some of picture is missing. Can I rotate the image so it plays rightside up without the black bars? The image was taken by an iPhone. I am viewing it on PC

When I rotate my video clip so that is isn't viewed sideways, it has black bars on both sides and some of picture is missing. Can I rotate the image so it plays rightside up without the black bars? The image was taken by an iPhone. I am viewing it on PC

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

[Solved] On fullscreen flash videos (like on YouTube) there is a black bar on the right side of the screen, and I must click slightly to the right of onscreen buttons instead of directly on them while this is happening.

On fullscreen flash videos (like on YouTube) there is a black bar on the right side of the screen, and I must click slightly to the right of onscreen buttons instead of directly on them while this is happening. It's like I should click where they should be, not where they are. The exact same problem happens on Google Chrome, but not on Internet Explorer. It also happens on some games I installed like, "Crysis".

Nevermind, I solved the problem by downloading this:
http://www2.ati.com/DriVeRs/mobile/11-6_mobility_vista_win7_64_dd_ccc_ocl.exe

Ipod won't play video/podcasts or audio only a black screen with the play symbol and volume/progress bar. games work fine! any ideas?

Ipod video classic 5th gen won't play video/podcasts or audio only a black screen with the play symbol and volume/progress bar. games work fine! any ideas?

Here's some more info.
I tried installing the latest iTunes to my housemate's PC, logging into iTMS with my account, authorizing his machine to play my content, restoring my iPod to the factory settings, downloading the videos and copying them to my iPod.
It worked fine, and I can play my videos.
I have done the exact SAME thing on my own home PC twice, after completely uninstalling and reinstalling iTunes, QuickTime, and the Apple Software Updater. But I still can't get any videos downloaded on my home PC to play on my iPods.
Any thoughts?

I dont know how to get rid of the black bars on the sides of my videos. The original clips dont have them but when i import them to fcp it puts them there

The original clips dont have them but when i import them to fcp it puts black bars on the sides of my video and i cant get rid of them

Here's my final (and simple diagnosis) You have 4 x 3 footage that your are trying to screen at 16:9. This won't work.
Artistically, you have three options:
1.) Stay with the "black bars." What some of us call "Bat Wings," in the biz.
2.) Do what some editors do and create a large "fuzzy" background to extend the edges...
3.) Or transform / crop the image. (Or just use the "fill" option in the "Spatial Transform" section of the inspector
But... You WILL lose some of the image

Is there any reason photos in an album page display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?

Is there any reason photos in an album page created in iweb display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?

there are three displays in photos page:
1) thumbnails grid - smallest
2) deatial view and detail view slideshow - large
3a) pop-up slideshow - vary - this is slideshow.html
3b) or iphone/ipad slideshow phoneshow.html - iphone/ipad can't do pop-up
it's difficult to know which you refer to.
if you refer to pop-up slideshow then you should not look into iwebmediagrid.js as wyodor suggested.
instead look in phoneshow.html and change width and heigth of element id slideshow:
#slideshow {
position: relative;
width: 320px; /* this is default width */
height: 360px; /* this is default height */
margin-left: auto;
margin-right: auto;
overflow: hidden;

For h.264 encoding, what size does the project need to be to avoid black bars on the top and bottom.

For h.264 encoding, what size does the project need to be to avoid black bars on the top and bottom. I am exporting the mp4 to Brightcove.

Hi there,
Which version of Adobe Captivate (If it is Adobe Captivate) is it and which Operating System is it?
Thanks.

Why am I getting black bars on the sides of my widescreen assets?

I am importing video, shot and edited 1920x1080p23.976, into Encore. The goal is to burn a DVD from this asset. I've tried exporting the project (from Premiere CS5.5) in every format on the list, and no matter what when I import it into Encore it show up in the monitor with narrow black bars on the sides. The assets are correctly being formatted for 16:9 (non-square pixels), but the video is just not filling the screen. This seems like it should be a simple thing, why can't I get this?
Thanks,
Steve

I'm going crazy trying to get the footage to actually crop. I have sequences imported from my Premiere project vis Dynamic Link. If I go into my quality presets inside Encore CS5 I can setup a top and bottom crop as in Ann's screenshot and then switch to output. It looks perfect. But when I save that as a new preset and apply it to my clips, the cropping does not apply.
I have tried over and over, new presets, double checking over and over and while the preset is applied, the crop does not kick in within Encore monitor or within the DVD preview. pillarboxing (black bars) are still present.
I don't understand why Encore has a cropping feature and then COMPLETELY IGNORES the cropping feature. Am I missing something.
So far all I can figure is to setup a new sequence in Premiere for every Chapter that is set to DV 24p. Then drop in the main sequence which is 1080p and resize it in the motion settings to 45.6% so that it fills a DV frame. At that point I can import that sequence to Encore and it looks fine.
Is this the best Encore can do? I would really rather link up the full 1080 sequences because otherwise I'll have to rebuild the entire thing if I want to make a BluRay.
Does anyone have any other suggestions or know how to get cropping to work on Encore CS5 (Mac).

Using footage from my iPhone 4, how can I remove the black bars on the sides of my picture? Or change the color to white...

My footage is vertical and there are two black bars on the side filling in the rest of the picture. I want to imbed this into PowerPoint without the black bars on the side. Any suggestions on how I can remove them or at least change the color to white? I changed the background color in View > Background > White, but it was only for editing purposes and didn't keep the color after rendering.

To change the background to white, in FCE, place the video on track V2 and place a color matte generator on track V1. The default color for the color matte is grey so you'll need to change it to white using the color picker.
-DH

Black bar along the right side and the bottom of the screen- DV5-1007ca

I have DV5 1007ca running Vista Home Premium 32-bit.My computer seems to suddenly think my monitor is a different size. I have a 3-inch black bar down the right side of the screen and about a 1/4 inch black bar along the bottom. My windows are still fully functional and completely fill the portion of the screen that is active. There is no loss of image, it's just framed by the black bars. If I do a Print screen and paste it into a document, the black bars are not there. It's as if the computer thinks the screen is a different physical size. This situation is present all the time, even when starting up. This is what I have done so far: -adjusted screen resolution settings = no change-rolled back my display drivers = no change-re-updated my display drivers = no change-rolled back my BIOS = no change-re-updated my BIOS = no change-System recovery = no change I searched posts here and elsewhere but the results were inconclusive. A couple of posters reported a virtually identical problem and were told they needed to replace either their screens or their graphics cards. Unfortunately, none of those posters ever reported back so it was unclear whether or not the issue was resolved. I doubt it is the screen since screen problem symptoms usually involve bits of screen not working and parts of the display being lost. My screen seems to be working fine, it just thinks it's smaller than it is. The graphics card is highly suspect. What's funny is that a little while ago, I started up my computer without changing anything and all was well for about a week and then it went back to the same old issue. Any helpful advice would be appreciated. This issue is driving me nuts!

I found a real solution that is hardware related. I was given a laptop with this exact same problem for free since my friend thought it wasn't worth paying to repair a 3 year old laptop, and was dead for almost a year (I think they manufactured these in 2008, but HP has almost no specs or info about them, specially ours; DV5T-1100) I have the solution to this problem, and is a solution not found almost anywhere using Google, and HP support doesn't want to tell you, simply don't know, or would make them look bad. I was able to fix it myself by using a rework station (basically a dedicated hot air gun) that I used to "reflow" the graphics chipset's connection to the board (keep reading, because this method may vary on result details). This simply means that I opened the laptop, removed the copper heatsink connected to the fan to expose both the micro-processor, and the faulty graphics chipset, and started cutting soda cans, or thick tin foil to cover the areas AROUND the graphics chipset, and leave the graphics chipset exposed so that the really hot air would concentrate only on TOP of the graphics chipset. Then, I put the device on 220 degress, with the tip of the gun 2 inches over the chipset, and circled the gun around heating that sucker for 5 minutes, then I did a 3 minute rest to cool off, and a final 5 minutes reheat again. Luckily enough it WORKED!, and it has been working for almost 10 months with heavy use. HOWEVER... doing a "reflow" like this on a micro component isn't reallt a proper fix. Sure you may get lucky, and I read of instances where the fix lasted for years, but also just months. This is because the problem is the old solder that connects each "ball" point under the chip to the motherboard may have a micro ultra tiny imperfections and misconnections on a few or many of the connected points cause by a long period of overheat of the chip due to both, a very bad heatsink, and heatflow of heat inside the laptop, and also (and usually) really bad maintenance on the user's part by having a really dirty and dusty vents, overuse, and blocking the ventilation exhaust of the laptop itself over time. A proper fix of this chip issue is another process called "reballing", where they actually properly overheat that particular chipset so much using IR heat, and an expensive machine, to "loosen" the solder of all connections and remove the chip itself to both, clean the old solder on the chip, and the old solder left on the motherboard, and actually REPLACE all solder with new lead solder. However, this process has to be very precise (hence the machine), and it maybe costly, and there's also the fact that MANY scammers out there either never really do a true reballing, ans just do a reflow to scam you, or don't have the experience to do a proper reball of the chip. So whose at fault here? Uneducated users that neglect learning how to properly maintain a laptop off its main enemies (dust and heat) no matter how good the hardware heatsinks may be, or is it poor hardware design by the manufacturer, where other brands or even other families of series off the same brand have actually better noticeable hardware design than these DV series that are so notorious to overheat easier than others out there? Well, I don't know, but I do know that you should be VERY careful having these laptops repaired and be scammed, because hey! Even so called "refurbished" or even so called "brand new" entire motherboard out there on Ebay are just bad reflow jobs with little to no warranty on them on purpose, to only last a few months on purpose. So, watch out, and THINK! before spending money on a beat up poor donkey.

How can I see more than 6 all day events in the week view without scrolling?

How can I see more than 6 all day events in the week view without scrolling? I need to see all of my all day events at once. I use this for scheduling and comparing of # invoices. Going back and forth to scroll is cumbersome. I just want to be able to expand the top section so I can see everything at once.

Any ideas, anyone?

Can I get rid of the black bar with the icons on f...

When on cam with a friend the black bar with the cam, mic icons fills part of screen can I remove this and still get the box to type in

I have the same problem and hope someone has a solution.

Rendered video looks differnt than project video black bars in the man viewing area?

Similar Messages

Maybe you are looking for