Rendering a large (Tiled) layer into the camera roll

Hi,
Wonder if anyone can help? I've got a very large tiled layer that I'm trying to take a screen shot of. Unfortunately it is a little too large for the normal method (renderInContext, UIGraphicsGetImageFromCurrentImageContext, UIImageWriteToSavedPhotosAlbum etc.) and the app runs out of memory.
Does anyone know of a way to achieve this? I was considering breaking the job up into multiple 'captures' - but I can't find a way to render anything but the entire layer - it would have been handy if renderInContext took a rectangle as a parameter!
Thanks for you assistance.
Craig

Hi,
Try to drag your videos to the iPhone photos folder in iPhoto. Should work.
If it doesn't help, you can always upload your files to dropbox or something similar and later download them on your iPhone.
Hope it helps.

Similar Messages

  • How can I move photos from other albums into the camera roll

    I have synced photos from my computer onto the iPad. There placed in a different album. How can I move them into the camera roll?

    You could do it by setting up a Shared Photo Stream. Select the photos in the Photo app then tap the Shared button selecting Photo Stream. Just don't enter any email address and it will appear on your other devices. Only photos can be added and not albums so you will have to re-organize then on the iPhone.
    I would recommend getting the photos to the computer as well though. Create a photo library on the computer and sync then over to the iphone with iTunes. The photo library on the computer can be added to a more reliable backup.

  • Transfer videos from the "videos" app into the camera roll?

    I have an Iphone 5.  I want to send my friends some of the videos on my Iphone using whatsapp.  The only problem I have is that whatsapp only allows me to send videos from tha Camera Roll.  And I have the videos saved in the videos app in my Iphone.
    So if it is possible please tell me how to send videos from the videos app to the camera roll.
    I have already tried a few apps but none of them allow me to send videos from the "videos" app to the camera roll.

    Nope.

  • Putting movies back into the camera roll on iphone 4s

    Have some videos that I shot with the iphone 4s, after shooting them I loaded them on my macbook air to free up space on the iphone with iphoto.  I now want to be ablt to reaload them to the iphone so I can edit them with imovie on the iphone.  I am wondering what the fastest way is to get them from iphoto back to the iphone camera roll.  I tried using Itunes, but the movie did not go in the camera roll so I could not open it up in the imovie app on the phone.  Tried a couple of apps that use wifi to transfer from computer to phone but one of the videos will not upload.  Is there an app that lets you transfer the movie back to the camera roll without using itunes?

    Hi,
    Try to drag your videos to the iPhone photos folder in iPhoto. Should work.
    If it doesn't help, you can always upload your files to dropbox or something similar and later download them on your iPhone.
    Hope it helps.

  • No Photos are saving in the camera roll anymore (original iphone)

    This is a new problem, but the first one Ive ever had with this phone. Yesterday, whenever I would take a picture, it showed that it was taken in the Photo Albums section. But when I went into the Camera Roll's folder, there were no pictures.
    I synced the phone today (updating to the newest software that was recently released), and I'm still having the same problem. I've taken 4 pictures since the update, but the camera roll shows "No Photos".
    (For additional information, I do have 50% memory or more free... so I know it's not a memory issue. I have also restarted my phone)
    Any suggestions? or similar issues?

    This should be helpful:
    8 / 07 / 03:09
    I think I may have found what “triggers” this. I noticed that my last successfully saved image on my iPhone was IMG_0999.JPG.
    I’m guessing that the bug in the iPhone is that the photo counter doesn’t handle image numbers greater than 999.
    After the restore procedure described here, I’m guessing the image number goes back to 0001, but that the problem will reappear 998 images from now.
    http://discussions.apple.com/thread.jspa?messageID=9868759&tstart=0#9868759
    Re: Photo taken do not appear in Photos on iPhone anymore !
    Well appears it had nothing to do with iTunes indeed.
    Read quite a few threads of disappearing photos issues and was really not thrilled at the prospect of restoring and going through the process of reinstalling apps, settings etc... Cannot stand going through command lines either!
    Instead I tried the http://www.ecamm.com/mac/phoneview/ application and deleted as instructed the .MISC folder inside the /DISC/DCIM folder.
    Worked!!!
    Interesting thing: right after that my pictures counter started at IMG_00001 etc... which could suggest indeed a 'bug' with the photo counter that reaches a limit and must be manually reset to 00000

  • I have just went to the Apple Retail Store and purchased an HDMI adapter that plugs into the bottom of my iPhone 4. When I asked the sales person if I could watch the videos and pictures from the camera roll I have taken on a T.V. he said I could.

      I have tried to watch the videos and see the pictures from my iPhone's camera roll on a televison but it is not working. It is like nothing is connected to the T.V. set. I have tried with cables that attach to the bottom of the iPone. I have used an HDMI cable and a component cables on two seperate Televisions. How is it supposed to work.
    I plugged the HDMI cable into the HDMI #4 jack into the T.V. and turned on the iPHone and watched the camera roll on the iPhone bu tnothing appears on the T.V. screen. What would have to be adjusted to view the pictures from the camera roll on the T.V. screen. The same thing happend when I used "Composite to iPhone" cables to a different T.V.  I even tried with and iPhone 3GS, still no display on the T.V. screen.

    Warranty on iPhone is not international, but valid only in country of
    original sale. Since you purchased the iPhone in Australia, your warranty
    is valid only in Australia. You must either personally return the iPhone
    to Australia for evaluation and possible replacement or sent it to someone
    in Australia to take into Apple for the evaluation. Apple will not accept
    international shipments for repair nor will Apple ship out of the country
    after replacement.
    Sorry to be the bearer of this news, but it is the way iPhone warranty and
    replacement has always worked.

  • How to get the source of a strange posted pic into my camera roll?

    I got a strange pic put into my camera roll, this pic is most likely put by an app which has an access to my photo gallery, all I want to know is how to get the source which put this image into my camera roll, I have a punch of apps that have a photo access grant and really don't know to disable all of these apps because of only one of them.
    p.s: the apps with photo access in my device (ProCam, CameraArtFXFree, Photo Editior-, Instagram, Poster++, Photo Vault, Facebook, Tango, Viber, Y! Messenger, Ipadio, Line, WhatsApp) And the only opened apps when this photo pushed to my Camera Roll were (Viber, Tango, Line, Whatsapp).
    Thanks in advance.

    >
    Nitesh Kumar wrote:
    > Hi,
    >
    > FM to get the program source code: RPY_PROGRAM_READ
    >
    > By using this FM you can get the program name(say report_name) and then you can use
    >
    > READ REPORT report_name INTO itab
    >
    > Thanks
    > Nitesh
    u dont need the last statement the FM itself returns an itab with code in it.

  • After sorting my pictures into albums, I  deleted them from the camera roll, now they're all gone. Including the ones filed in the albums. Would it be possible to get them back ?

    after sorting my pictures into albums, I deleted them from the camera roll, includings the ones filed in the albums. Would it e possible to get them back ?

    A photo in the Camera Roll cannot be in an album unless the photo remains in the Camera Roll. Photos in an album or not duplicated. A photo in an album includes a pointer to the original photo stored in the Camera Roll. The Camera Roll is for temporary storage. Photos/videos can and should be imported by your computer as with any other digital camera.
    The Camera Roll is included with your iPhone's backup. If your iPhone's backup has been updated to include all photos that were in the Camera Roll and has not been updated since the photos were deleted, you can try restoring your iPhone from your iPhone's backup. Do not update your iPhone's backup before doing so and decline the prompt to update your iPhone's backup as the first step after selecting Restore.

  • Can i put photos back into the camera chip once they have been imported into my mac?

    Can i put photos back into the camera chip once they have been imported to my Mac?

    Export them
    File -> Export
    to a folder on the desktop. From there copy them back to your camera.
    Remember, the camera has a quite specific set up of folders, and you'll need to put the files back in the correct place for them to be viewable on the camera.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • Using the 192.168.1.115 IP address I can ot get into the camera.

    Hello,
    Just installed the WVC54GC WEB Cam and it sees the network both wired and wireless.  But if I try to get into the camera to update the firmware and make changes to the settings I get the "Cannot find server" error message.  I used ...
    http://192.168.1.115 but it's not working. I can get into my 80211G Linksys router with no issues.   Any ideas what is going on here?
    Thanks
    Bud

    just bougt the wire less G RTZ internet cam , the helpdesk not to reach in netherlands, total overworkt.  everyting installed bij typing 192.168.1.115 no connection possible.  in the display of the cam stays that ip adress.
    i am sick of this **bleep**, including that helpdesk.
    i bring back the cam to the shop and get my money back as the promissed.
    i will wait till the new sijstem comes of wireless USB  that will be very friendly for installing the same as BLEUTOOTH that is also logical friendly software.
    the old **bleep** as they use now, please throw it in the garbish.
    better waith for the new sijstem than put 10 ours of installing old **bleep** now.
    greetings , robert  www.trebor.nl

  • My camera is a sony dsc-w330! I can't get my cord to go into the camera so I can download my picture

    Hi, My kids bought me a sony camera  dsc=w330 cyber=shot last year in october! The camera is fine except I can't get the cord to go into the camera to download it to my computer! It was always a little hard to get it to go into it but now it won't go in at all! It's like something is wrong with the camera! I tried a new cord and it still wouldn't work! I don't have the receipt because my girls got it for me and we was going thru a rough time with my husband as he was sick and had pasted away and they have no ideal where they put the reciept! Is there anything I can do? th Thank you for any help you can give me, Penny Newman  62 german hollow   Ironton, Ohio 45638

    First: Please, please, PLEASE, edit your original post, removing your address. Including your address, phone number or email address in an open forum like this is a very bad idea. Second, just to be clear, the W-330 uses a miniUSB cable, not a microUSB cable. I have no doubt that the cable that came with your camera had the correct connector on it, but please make sure that the new cord you got has the right connector on it. MiniUSB connectors were always a little bit troublesome, so I'm not surprised that you might have had trouble with that, but if you possibly got the wrong cable as a replacement, that could definitely cause a problem. Beyond that, I agree with bitsnpieces that your camera may be damaged. I also suspect that the warranty has expired, even if this problem might be covered by a warranty repair, which I suspect it wouldn't. I fear that your best option is to replace the camera.

  • HT201302 Old iphone 3g has photos on it. When I plug into my imac iphoto and image capture only bring up photos in the camera roll. There were more photos on albums and photo library on the iphone that arent showing up in iphoto and icapture.

    My old iphone 3g has photos on it. When I try to get the photos off and onto my imac iphoto and image capture only bring up the camera roll. I have more pictures that arent on the camera roll there are albums and a photo library full of pictures that I want off of this dang phone. I have tried everything and I cant email them to myself because the service has been cut off of the phone. They are stuck on the phone there is there any way to get them off? Am I missing something.

    The iphone is not a storage/backup device.  It simply mirrors the selected content of the computer to which it is synced.
    Again, the photo sync is one way.
    Did you fail to maintain a backup copy of your old computer?
    Not good.  You can e-mail the photos from your iphone.  You do not need to have phoe service for this.  The iphone uses wi-fi.  The photos will never be of the original quality, as they are reduced when synced to iphone.

  • Why are all my pictures being saved to the Camera Roll album?

    Hi
    Every image saved to my iPhone 5s (iOS 8.1) is saved to the Camera Roll album and not to any other folders i.e. Snapchat images are not saved to a Snapchat folder, Instagram pictures not saved to an Instagram folder, Twitter pictures nto saved to a Twitter folder.
    Also, in a possibly unrelated query, I moved a large chunk of images from my Camera Roll to a separate folder (called "London" for my visit of the city) but they also still remain in the Camera Roll album.
    Can anyone help me out?
    Thanks

    I've just received my iPhone 6 & upgraded to ios8.1.
    After I set up my new phone & restore my icloud backup from my old iPhone 4, I found that the photo album cannot be used, photo taken by the camera cannot be saved (anyway the thumbnail of the photo just taken was showed on the bottom left corner).
    When I go into my photo album, there are no photo at all.
    Same with videos. Instagram works fine, facebook crashes when I try to take photos. Camera + works with the app photo stream, but gives error message when I try to save camera+ stream to camera roll
    I tried to reset & delete everything for 5-6 times, the problem still there.
    Anyone can help on this problem please?

  • We can't get to the camera roll right now

    I have a dell Latitude 10 table with Windows 8.1 RT. Last week I decided to unload all the pictures from the camera roll to my PC and I did it without a problem, but in the process I removed the camera roll folder under the public pictures library. Since
    then, the camera app is not working and it gives me the following message: "We can't get to the camera roll right now". I've re-created the folder, set the default save location and public save locations to the Public Pictures folder but the error
    keeps popping up every time I open the camera application. If I try to shoot a photo or a video it tells me that it couldn't be saved. How do I set the camera app to use the new folder?

    I had the same Problem, and all experts could not help. I even dowloaded tools that say thy would fix the problem. Anyway as a matter of fact it still is a computer, no magic.
    I found a way: Open regedit, search for "User Shell Folders".
    Then check all the directories.
    In my case one of the directories refered to the one I deleted. I just changed it and restarted my computer.
    On my iconia it saves into this key:
    I changed it | Keep the Name of the folder "Camera Roll" depending on your language it will rename the folder in the Explorer library automaticly. (in Germany to Eigene Aufnahmen)
    {AB5FB87B-7CE2-4F83-915D-550846C9537B}
    D:\backup pics\Camera Roll

  • How do I put photos in an album and remove them from the camera roll?

    I would like to be able to move photos into an album and remove them from the camera roll. Is this possible?
    I take many photos of mundane things that I simply want to remember, such as serial number of products. I would like to save these photos for viewing, but I don't want them to appear in my camera roll, where I have to continuously scroll through many such photos to get to the ones that I want to view there.
    I know that Apple has a "hide" feature, but it doesn't actually do anything. When I press-and-hold on individual photos, the photos stay in the camera roll: they aren't hidden at all. It's not clear what the purpose of this function is at all.

    You don't do this, as the photos are in the camera roll.  That is where they live.  When you make an album you are simply making a list of pointer to your photos in camera roll.
    If you remove them from the camera roll, then they are gone. 
    Photos in albums are not in two places.  They are in only one place, the camera roll.  The album merely contains pointers to those pics, so that you can categorize them however you like.
    You should be importing these pics to your computer.  I find it far easier to organize my photos on my computer, then sync them to the iPhone.

Maybe you are looking for

  • Records management and Document builder in SRM with PS

    Hi, We are implementing SRM 5.0 with PS ( Public section), can any one share any experience and documentation about Records management and Document builder in SRM with PS. Thank you Sreedhar Vetcha

  • Hyperion Smart View

    We are working on the BI Strategy for our Planning and Allocations. The business users download templates online or offline in excel, and upload bulk data, for e.g, mulitple records for a set of fixed columns. Can Smart view handle this kind of uploa

  • JSSE Error in JRE 1.3.1

    Hi, I've got a really strange issue using JRE 1.3.1. I keep getting a Socket Closed exception when trying to connect to when in 1.3.1. If I use JRE 1.4.2...it works fine! I'm user Websphere and I've noticed that IBM has their own implementaion of JSS

  • CS4 Save As and ActionScript Versions

    I'm curious as to which versions CS4 can save an FLA as. As government contractors we are obligated to submit our FLAs as part of our final deliveries, and some customers require the version to be 8. For this and other reasons we need to be mindful w

  • Manual update of ANLC and ANLB table

    Dear All, After opening of new asset fiscal year its found that expired useful life and period has not been updated in previous year and 1 asset is missing from ANLC table in the year 2014. Is there any way to update the ANLB and ANLC table manually.