Rendering AE Linked Comps in Premiere Pro Stops

Whenever I render AE Linked comps in Premiere Pro it stops, I go to the After Effects window and go back to Premiere Pro and it starts rendering again, I have to keep doing that in order to render the whole timeline... is there a way to fix this? I am using Mac OS Mavericks

You could pre-render in Ae, and replace the linked comps with the rendered file.
But, to get it working as it should, you probably will need to run the usual battery of diagnostics for your OS and Adobe products.
http://forums.adobe.com/message/5558434#5558434

Similar Messages

  • I have a pc with windows 7 professional.  I use adobe cs6 production suite and all of a sudden premiere pro stopped working.  I had installed a program recently and created a system restore point prior to it's installation.  I installed Zaxwerks proanimat

    I have a pc with windows 7 professional.  I use adobe cs6 production suite and all of a sudden premiere pro stopped working.  I had installed a program recently and created a system restore point prior to it's installation.  I installed Zaxwerks proanimator 5.1.  Restored computer back and I now get an error when trying to run any cs6 program it is a configuration error and it says to uninstall and reinstall.Won't uninstall says I have an error 1.  What should I do?

    clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Hi i was told to come to the support with the error number 16.... for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    Hi Omid,
    Please refer to the help document below to fix the error 16:
    Configuration error 16 | CC, CS
    If the issue persists, please contact the support:
    Contact Customer Care
    Regards,
    Sheena

  • Premiere pro stopped working when starting help me

    My Premiere Pro CC keeps giving me a "premiere pro stopped working" when I try to start it. What do I do?

    Hello Genero,
    I'll see if I can help you out a bit here.
    There could be a number of different issues causing this problem...
    So if possible could you please let me know what operating system you are working on (Windows or Mac)
    Have you been using PP for a while and it just started this behaviour, or have you just recently installed and have not been unable to use the software at all?
    What is your setup like?
    A few things to try:
    -Reset your Preferences:
    When launching Premiere Pro from either a Mac or PC, hold down two keys while launching. This automatically throws away Premiere’s preferences.
    For the Mac, press Shift+Option
    For the PC, press Shift+Alt
    In both cases, continue holding the keys until the splash screen appears. You will know you successfully trashed preferences when the splash screen doesn’t have projects listed.
    -Add the newest update to Premiere Pro software, if you are not already up to date.
    -Install the most up to date driver for your graphics card and restart your computer.
    Please get back to me and let me know if that helped at all!
    Cheers
    Jasper

  • Premiere Pro stops rendering and gives error message when encounters "RGB Color Corrector"

    Premiere Pro (and also Encore) stops rendering and gives error message when it encounters a clip containing the "RGB Color Corrector" in any clip.  It will process clips without RGBCC, but will stop when it gets to one with RGBCC activavted.  PP will render clips if other effects, such as "Fast Color Corrector", "Color Balance (HLS)", and "Three-Way Color Corrector" are selected. However, these do not have the capabilities that The other color correctors will not do what RGB color corrector does, so I need to have this working to finish a large product that is due to the client.  Please help me..... I am not using the Creative Cloud version, and can't find either a download for the new update from 2013, or a phone number to talk to anyone. 

    Using a Win7 computer with 2.8 quad core processor, 24 gig of ram, Nvidia Quadro 5000 video card.  Don't think I have any plugins.  I looked at one a while back for cleaning up grainy video, but I am not sure I paid for that.  Think I deleted it. 
    Incidentally, someone named Jim on another part of the forum mentioned that this problem has been fixed in the CC version of the program.  I am using the non-CC version because I am 68 years old and only do seminars and documentation video.  Don't need so many bells and whistles, and definitely don't need learning curves every few weeks.  CS6.0.3 works fine for me.  By the way, someone else said that maybe version 6.0.1 might work better and I should revert to that.  Not sure if it is the version i have on the disk upgrade to 5.5 that I purchased in December. 
    As it stands now, I have 7.5 hours of a seminar that is ready to go out the door.  If there is an upgrade I can get from Adobe, maybe you can tell me about it. If I have a setting incorrect in the video output format, maybe I can change that.  So far it just happens with clips in my video that have RGB color correction. 
    Rick

  • CS 5 AE comps with Premiere Pro different in CS5.5

    I just upgraded to CS5.5 this morning. I'd been working on a Premiere Pro project with imported AE comps for lower third titles. After the upgraded, those comps are no longer transparent -- they cover the underlying video tracks rather than just having a partial opacity lower third strip. I assume this has to do with an alpha layer problem? They were working perfectly before the upgrade, not working now. Anyone have any idea what's wrong and what do to about it?
    Thanks!
    Laree

    I assume that by "imported AE comps for lower third titles", you mean that you are using Dynamic Link to import the AE comps directly into Premiere Pro, as opposed to rendering them to a file first.
    We are investigating a problem in Premiere Pro CS5.5 and Dynamic Link that may be to blame for this.
    Does your setup match the following:
    The background color of the After Effects comp is not black.  (Not RGB 0, 0, 0.)
    Hardware acceleration is enabled for Mercury Playback Engine in Premiere Pro.  (Project menu > Project Settings > General, Renderer is set to "Mercury Playback Engine GPU Acceleration".)
    If so, you may have tripped over the same bug we're looking at.  Sorry about that.  The cause of the problem is being investigated.
    You can work around the problem by doing either of the following:
    Change the background color of your comp to black. (RGB 0, 0, 0.)
    Change the Renderer setting in Premiere Pro to Mecury Playback Engine Software Only.
    If this problem doesn't match your situation, please elaborate on the contents and settings of your project, and/or post some examples for us to look at.
    -=TimK
    -=Adobe After Effecs QE

  • Where is a link to the Premiere Pro CC 2014.1 (8.1) update? - Can I get help with the ticktime.cpp-290 error?

    Ola to precisando do premiere versao 8.1 caravan consegue o link?
    Message was edited by: Kevin Monahan
    Reason: needed better title

    Hi Kevin,
    I posted about the same problem (TickTime.cpp-290 error) in another thread, but since you're asking here specific questions to resolve it, I'm answering it here.
    Re: Debug Event: [...\ ...\src\TickTime.cpp-290]
    What were you doing when this error started to occur?
              Nothing special I remember. The only thing I do recall, is:
              I was working with Premiere Pro (where the main project is), After Effects but rendering some PNG sequence, and Adobe Media Encoder. I sent from AE to AME a project to render. Configured 2 outputs (PNG & MP4). The same way I sent from PP a project to render and one error occured. Unfortunately I didn't write down the error, but it was like a path C://AME_64/something. But the AME queue updated and everything seemed OK. I close AME to be sure that the error wouldn't be the source of future error during rendering, and relaunched it. And at that time I couldn't open it. I got the error "Adobe Media Encoder has encountered an unexpected error and cannot continue". The only way I found to resolve this is to remove the directory /Users/%USERNAME%/My Documents/Adobe/Adobe Media Encoder/8.0/". The problem seems to appear when I save the queue. And since that time, Premiere do the TickTime.cpp-290 error.
              Another thing I noticed, don't know if it was there before, is, the AEP file in AME queue setttings displayed framerate as "25 / 29.97 / 30 / ...", a 2 digits number for the framerate. But suddenly (I thought first it was because of the Premiere Pro file being added to the queue, but no because it appended after without it), it was displayed as "25 000 / 29 970 / 30 000", a 5 digit number.
              After that, the TickTime.cpp-290 appeared. Sometimes when opening project, sometimes and resetting or changing the workspace (because it was messed up), sometimes when closing.
    Do you have iCloud installed?
              No.
    Is this a Premiere Pro CC 2014.0 or Premiere Pro CC 2014.1 project that was updated to Premiere Pro CC 2014.2? If so:
              It started long time ago a draft in CS6, but since I reopen the project, I saved new versions in Premiere Pro CC 2014.2 (not sure if I have other version like 2014.1 or 2014.0). Is there a way to know which 2014 version are my files? If I look into the XML I only saw Version="28"
    Do you have a copy that can be opened in an earlier version?
                  An old draft version in CS6. But that version has footage in different framerate and not all be interpreted at the timeline framerate.
    Do you get the same error in that earlier version?
                   No error here, the file opens properly.
                  Additional info: I tried to open the 2014.2 file on another computer (where PP 2014.2 is installed) and same problem (this computer is on Win7 64-bit)
    Did you use any unusual footage types in your project?
         I used MOV (Animation), MP4 (H264), and PNG sequence. The framerates of the footages are 24,25,30 and 60fps (but everything has been interpreted in 30fps)
    If you remove them, do you still get an error?
                  When I had the error, but not when I open the project file, I resave the file removing anything not interpreted in 30fps (because at that time I still had footage interpreted in their original framerate). I was able to work for some time, but now I can't open it anymore despite that.
    Was the fps interpretation changed in any of the clips?
         Since the error appeared, and because I saw in another thread that it could be related to footage of different framerate, my timeline is now in 30fps and all the footage have been interpreted in 30fps. Footage are MP4, MOV, PNG sequence in 24, 25, 30 & 60fps.
    If so, restore them to their original fps and see if you still get the error.
                  Unfortunately, since I can't open the project anymore, I can't test that.
    Did you use Warp Stabilizer?
              No.
    Do you have any browser plug-ins?
              What do you call browser plug-in in Premiere?
    Are there any third party plug-ins used?
              I have Magic Bullet Looks 2, and I'm using it on this project.
    If so, remove the effect from those clips and see if it improves the situation.
                  Unfortunately, since I can't open the project anymore, I can't test that.
    Some additional infos on my computer.
    I use Windows 8.1 (64-bit),  all Adobe softwares installed have the last update (for video apps, it's 2014.2)
    The language settings are configured in French, but Windows and CC apps are in English.
    If needed the 2014.2 project file is here:
    https://dl.dropboxusercontent.com/u/68413846/showreel19_30fps.prproj
    Thanks in advance to help us to resolve this weird bug.
    Christophe.

  • Dynamic Link Question (with Premiere Pro CS3)

    I'm using Dynamic Link to bring a composition from After Effects CS3 into Premiere Pro CS3.
    It's just a basic DV 720 x 480 project - the composition lays over my video, so I'd like to use the dynamic link composition instead of rendering the composition as an uncompressed AVI 32-bit.
    My question is - if I just render the dynamic link and use that in my final video edit - is there any quality loss - as opposed to rendering the composition from AE as a 32 Bit AVI and then importing that AVI into PP?
    Thanks
    FOO

    There is no loss in quality. After all, Dynamic Link is nothing more than an invisible instance of AE that renders each frame just as AE would standalone. However, depending on the complexity of the compositions and resulting memory requirements, you may experience problems or the render may be noticeably slow.
    Mylenium

  • Rendering problems with Cineform files Premiere Pro CS6 Mac

    Using CS6 Premiere Pro (latest updates) on MAC OS X 10.8.2 with Cineform stereoskopic files. Generally all looks good. Preview is working smoothly. When rendering (H264 Blu ray, MP2 DVD, Quicktime.. does not seem to matter) slowly the number of threads is increasing while rendering and when there are about 2050 threads or so then rendering just halts, CPU load going down, progress stops, rendering never finishes. Anybody having an idea what could be the issue?! Thanks

    Okay how should I be exporting the files to use in premiere then? I exported a couple that were just a minute long and they ended up being 2 gb...

  • Can i make a comp. in premiere pro CS4?

    hi!
    i am editing a video now and i got a problem!
    i have Magic Bullet instant HD and when i am using it, it just zooming in :S
    Thats not what i want!
    i want it to do it to HD without zooming in!
    i am managing to do it in After effects CS4 but i need to do it in premiere!
    Please help me!
    ps: http://www.redgiantsoftware.com/videos/tutorials/ there it is a tutorial on how to do it in after effects.
    maby you will understand it(?)
    -Thx!

    JibbeSander_skier wrote:
    aha, thanks i think i got it now!
    so sequence is kinda premiere`s comp?
    Glad you got it working.  If you're completely new to Premiere Pro, you might take a look at some tutorials to help you get started:
    http://tv.adobe.com/show/learn-premiere-pro-cs4/
    http://www.lynda.com/home/DisplayCourseN.aspx?lpk2=369
    Good luck.

  • Can't apply transitions to After Effects comps in Premiere Pro

    Hi people, newbie Premiere user here (my boss is trying to convert me from FCS) :-)  I downloaded the trial version of CS5 and want to learn as much as I can before my initial 30 days is up.  My initial experience has been pleasant, but I've come up against an obsticle I could sure use some help with.
    1)     Creating my timeline with serveral clips
    2)     Exporting certain clips to After Effects; 'Replace with After Effects composition'
    3)     Adding my effects
    4)     Back in Premiere Pro my clip is replaced by the comp.
    5)     Try to apply a simple cross-dissolve across 'Comp 01/Comp 02'
    PROBLEM!
    Seems the transition will only snap to the start of the second comp.  With clips I can drag & drop the effect to span the clips and get perfect results, but not on an After Effects comp.
    6)     In Premiere Pro 'Effect controls' change parameter so that the transition centre is at 'cut'
    The result indeed spans the clips, but the effect quality is terrible - decent fade from comp 01 to a sudden dip to black before fade-up on comp 02.
    Yes, I understand the 'Layers' concept, but I'm not asking the software to do anything nonsensical, just a simple cross-fade across 2 comps.
    I really would appreciate any advice anyone can offer, I'd really like to be converted (mainly because if I AM my boss has promised to buy me a licence when my 30 days are up!) :-)
    All the best
    Steve

    To expand a bit on Colin's comments, back in the film days, the concept of Handles was easy to grasp, as the pieces of film were on an A and a B Roll, and the editor had to physically overlap them by the desired amount, so that the lab could print with a Dissolve. The same held for the days of A-B Roll digital editing, where the Clips were again physically overlapped on separate Tracks. Then, digital editors were developed that allowed one to edit with the Clips on a single Track, and where Transitions were applied between them. The Handles were necessary still, but were no longer visually obvious.
    These images will tell you a bit more about the concept:
    Hope that this helps,
    Hunt

  • Trial premiere pro stopped working

    I know many people have probably posted something like this but the program crashes as soon as it opens (just started trial)
    i use a windows 7 lenovo laptop 1 year old
    the graphic driver is an Nvidia NVS 5400m
    i have never downloaded from nvidia so i don't know how to update my driver if that is the problem.
    Again i know this is a common problem but the suggestions i read don't quite apply to me

    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Do you have dual graphics adapters?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • Premiere Pro stopped working

    Hi anyone, I tried launching my trial version of Premiere Pro, and it returns a message that it has stopped working, and windows will notify me when a solution is found, any ideas what the problem might be? And any way of resolving it to get working again? Thanks you all.

    I have just found this thread
    http://forums.adobe.com/thread/1235582?tstart=0
    This may help?

  • I cannot find any link to reinstall Premiere Pro CS6

    I had to replace my crashed drive requiring me to reinstall Premiere Pro CS6.  All I get is the run around,   So is there a  link that I can simply download the full version in English, not patches and updates or the new CC subscription version?  When I purchased CS6 over 2 years ago,
    I was assured by Adobe that I would always be able to download it rather than need a set of disk.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Media Encoder doesn't start rendering when I queue from Premiere Pro

    I have Premiere Pro CC and Media Encoder CC, and it seems the render in Media Encoder never starts or takes a very long time to process.
    When I start exporting on Media Encoder, the preview shows up, but the encoding time stucks at 00:00:00 or 00:00:01.
    If I export videos using Premiere Pro, the video exports just fine. It just that Media Encoder is not working.
    This happens when I use Audio Effects on my audio files. I've been exporting audio separately and re-importing them into my Premiere Pro project so that Media Encoder will export my videos. But this takes more time to make videos.
    Anyone having this issue?

    [Moved to AME forum.]

Maybe you are looking for