Rendering All 3D Layers in Photshop CC 2014 at once.
Hey there,
I've got a .psd with around 100 3D Layers in it - I'd like to render them all (the catch is they aren't using any global settings) but I can't find an option to "Render All 3D Layers at once". I was thinking that maybe I should record and use an action but before going through this way I'd like to know if there's something I'm missing?
Thanks!
I was hoping someone experienced this same problem and could help me out. Exact settings sounds a bit extreme, way too many options and objects. I will just figure it out myself.
Thanks for nothing nobody's.
Similar Messages
-
Is there an issue with Edit Auto-Blend Layers in Photoshop CC 2014?
The command Edit > Auto-Blend Layers in Photoshop CC 2014.1 does not seem to produce the expected results for me. For example, I used the Edit > Auto-Blend Layers command when I was doing the exercise on Adding Depth of Field starting on page 122 of the Photoshop CC 2014 CIB. The results: Instead of the foreground and background being both in focus, only the foreground was in focus. The background was out of focus. And, when I turned off visibility of the foreground layer, the background layer showed as transparent.
There seems to be.
See this thread:
Since installing the latest update of Photoshop CC two days ago, Auto Blend for focus stacking is selecting all pixels from the bottom layer instead of selecting the ones in best focus from each layer. Has anyone else seen this problem? -
Text rendering incompatibility
Safari 7.06 and Muse 2014.1.1.6
Websafe fonts render poorly when on top of a
‘Browser Fill’ has ‘Image added’ and ‘scrolling’ check box left unchecked’
or when
Any ‘composition is set below the text and composition is set to ‘pin’
Comparison Web safe fonts render
Chrome = all good
Firefox = all good
Safari running on ‘non-retina’ displays = bad
As mentioned these are websafe font / also occurs with self/hosted fonts
unfortunately client is viewing on Ipad that is non retina and uses Safari.
Any work around?
Thanks
MiltonHi Zak
Thank you for your prompt response.
I have been reviewing this issue on a number of screens an Browsers – I realise the huge hassle of compatibility comments.
Below links and further explanation and screen shots
Thanks again
Milton
Web safe fonts (e.g. helvetica / arial) render poorly when:
Any ‘composition’ is set below the text and the 'composition' is set to ‘pin’
See first scroll page at www.edehorton.com
The top slideshow is 'pinned' and it is this action that creates the issue for text on the whole page.
It also occurs when text is on top of a ‘Browser Fill’ that has an ‘Image added’ and ‘scrolling’ check box left unchecked’
See first scroll page a www.edehorton.com/judaica.html
creates the issue for text on the whole page.
I can remedy these situations by ‘unpinning' the 'compostion’ or placing the ‘pinned' 'composition' above the text
or in the second instance by turning the ‘scrolling’ radio check button in ‘Browser fill’ on.
Screen snap shots below
Comparison 'Web safe font - Helvetica' plus 'Webfont' render
Chrome = all good / Firefox = all good /Safari running on ‘retina’ displays = all good Safari 5.06 on' non-retina' = all good
Safari 7.06 running on ‘non-retina’ displays = bad -
Is there a way to force for rendering ALL clips in work area?
Is there a way to force for rendering ALL clips in work area? All clips: not only the ones with the red horizontal line indicating that they need rendering! I ask for this because the rendered clips preview very smoothly, but the unrendered ones do not! My source footage (and project) involves Full HD (1920*1080i 25fps).
If a Clip does not need Rendering, it will not be Rendered.
Basically, what Rendering does is to convert the Clips, that do require Rendering, to DV-AVI (SD Projects on a PC). This will yield AVI files in the Media Cache, Render Files, and for playback, PrE will rely on those. If you look in the Render File folder, you will see a bunch of abstractly named files, but those files are now Linked in the PREL (Project file), and will be used by the program for playback.
If one were to remove those Render files, and then Open that Project in PrE, they'd receive a message, "Where is file 04u434ip0ow.AVI?" [Note: that is just an example of the abstract Render file name, and is not the actual name, that one would see.]. One could Ignore those now missing Render files, and where they were used, there would then be red lines over those Clips.
As Steve mentions, the Render files are used only for smoothest playback. As I use DV-AVI files for SD Projects on my PC, I will not need to Render for smoothest playback, until I make changes to the Clips, like overlay Titles, PiP, Effects, etc.. I might never Render the Timeline, even with those additions, but sometimes, I will Render a small segment many times, especially with animated Effects, as I adjust the parameters.
If one is not getting the smoothest playback, then Rendering all files requiring Rendering will usually improve playback greatly.
Good luck, and hope that this makes sense.
Hunt -
How to turn off all the layers in one go?
How to turn off all the layers in one go?
In case the pdf file contains layers, then how to turn them all off in one go?
Thank you for the help,
Best
Jamalable,
What happens if you select both the grunge and the image and in the Transparency flyout tick Make Opacity Mask? You may try different ticking/unticking and colours. -
ADF FACES: af:table not rendering all columns
I'm using ADF EA 17 with myFaces 1.0.9 on JBoss 4.0.1/JVM 1.4.2_07-b05. The af:table is embedded within an af:panelgroup (being body of af:panelbox).
The af:table is not rendering all columns (only last 2 out of 8 cols total). The model behind the af:table is a java.util.List. Debugging shows that the list is filled up with beans correctly and that each of the properties of such a bean corresponding to a table column are also set correctly.
Strange thing is that sometimes all columns are rendered ok. Especially if i make heavy changes on the jsp (e.g. removing all but 2 cols from the af:table) and dropping it into the .../jboss/server/../tmp/deploy/tmpXYZ-exp.war directory. Restarting JBoss results in the old behaviour. Also closing browser and re-opening it yields to the missing columns again.
I've set breakpoints on the bean properties representing on table column and i can see, that the getter methods aren't called (all but those 2 that get rendered finally)
Table has multiselection enabled with 1 command button.
This happens with both IE 6 and Firefox 1.0.4; no oracle, myFaces exceptions visible on console or any log file.
Has anybody made same experiences so far or an idea what the problem really is ?
best regards,
Christoph.I've tried it also with a plain af:table without any surrounding af:panelgroup or/and af:panelbox. Same result.
The bean holding the table-model (the java.util.List) is in session-scope. the table-model is update by an actionListener fetching values from an EJB. Could the session-scope be a problem ?
Potential candidates from my point of view, that might cause trouble here:
--) Caching (i've seen that sort of "CachedRenderers" are used
--) partial page rendering
--) multi-threading issue.
--) or any silly mistake of mine :-)
best regards,
Christoph -
Merge Stamp all visible layers
I'm trying to "Merge Stamp all visible layers" as Adobe calls, it by pressing Shift+Command+Option+E which normally works for me, but in this instance it's not. Is it because I'm using Smart Layers? I'd like to create a new rasterized layer that contains a merge of all of my previous/lower layers, without flattening all of the lower layers. I was able to do this by duplicating the Smart Layers, and then rasterizing that, but why won't Shift+Command+Option+E work, as it normally does?
Thanks in advance.If I’m not mistaken having a SO selected should not make a difference – at least it does not for me.
The occasions where I’ve noticed the command does not work is when I have an invisible Layer selected, in which case command-alt-shift-N (new Layer), command-alt-shift-E usually suffices as a work-around.
Mind posting a screenshot with the Layers Panel visible? -
How do I apply the blur filter to all my layers at the same time?
Hi I'm working on a background for a web page and I want to try how different filters are going to affect all the layers. Is it possible to apply a filter to all the layers without flattening the file first? Thanks very much,
CathyThanks very much , that's really helpful,Cathy
Date: Thu, 23 Dec 2010 11:18:21 -0700
From: [email protected]
To: [email protected]
Subject: How do I apply the blur filter to all my layers at the same time?
Hello!
There is no need to flatten the file, but you can create a layer that merges all the content of the image, and apply the filter on that layer.
Target the topmost layer, by holding the Option and . (period) keys, then create a merged copy by holding down Command Shift Option E.
> -
i was painting in photoshop and accidently rotated all the layers and the canvas. how do i realign them?
dubrox666 wrote:
Image rotation works if the canvas isn't rotated, the canvas was rotated by acciedent (gesture on my tablet) and image roate dosen't fix the canvas when it is rotated, even my guides were coming in crooked, image rotate rotated my image but not the canvas, it happened to me again so i reverted to my previous save, even my instructor dosen't have an answer?!!
Risto
Good gracious. It sounds like you were able to rotate the canvas a more or less exact multiple of 90° or you'd have spotted that it was skewed. I just tried it using the r shortcut, and while it is doable, it is not particularly easy to rotate the canvas to a point where it could fool you. What does surprise me, is that while the Options bar shows the degree of rotation while the r key is depressed, I could see nothing on the UI to tell me that the canvas was rotated. That's something that you might want to start a thread on the Photoshop Feedback page.
Photoshop Family Customer Community
Anyway, Escape is the usual way to cancel rotate canvas. -
I have photoshop cc, and I am used to photoshop elements. In photoshop it wont allow me to just click on a layer, and have it select that layer . I have to click on the layer in the box that shows all my layers in order to select it. I also want it to not only select the layer on the actual project, but put a hashed line around it that allows me to resize it manually, without having to do it in another window. Does that make sense? I cant even get the layer to select. PLEAE HELP. Id also be able to just click on the layer and drag it. It wont let me, and I am confused.
If you were serious to learn Photoshop, I'd advise you to take Photoshop classes at your nearest community college or some such institution, to take a subscription to lynda.com, to watch all the Photoshop videos at Adobe TV, to google for specific video tutorials on You Tube and for other tutorials in text format.
Even the Help menu in Photoshop can be a great starting place.
Don't expect to find in Photoshop the kind of hand-holding features that Elements has and that appeal to beginners and amateurs. -
Rendering of Css Layers OUT on DW for some strange reason
For some reason the rendering of the Layers in DW has blow
out. I don't think anything changed in the css and it was
displaying correctly. I did DUMP my config file for DW to see if it
would resolve, but no.
See this screen shot:
Text
Someone said this is a known issue but I searched extensively
here on adobe and I didnt' see it. Using the keywords Render DW css
layers.
Any advice is appreciated.What does the page look like when viewed in a browser?
Which version of DW are you using ?
If the site is messed up when viewing in a browser, it may be
best to link
to a live example of the page, that way people can check the
code to see if
there's anything wrong that may be causing the issue.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/
~ Forum Posting Guidelines ~
http://www.adobe.com/support/forums/guidelines.html
"manchomark" <[email protected]> wrote in
message
news:fk9hq0$2r9$[email protected]..
> For some reason the rendering of the Layers in DW has
blow out. I don't
> think
> anything changed in the css and it was displaying
correctly. I did DUMP my
> config file for DW to see if it would resolve, but no.
>
> See this screen shot:
http://www.ntfb.org/dev/problem-layers.gif
>
> Someone said this is a known issue but I searched
extensively here on
> adobe
> and I didnt' see it. Using the keywords Render DW css
layers.
>
> Any advice is appreciated.
>
> -
Bridge open in Layers PS CS6/CC 2014-issue
Hi there. I am currently using PS CC 2014 but still have PS CS6 an my HDD. As soon as I try to open several pics into layers from Bridge, CS6 NOT CC starts to do so...?!
I have a 2012 MacBook Pro with Mavericks installed.Oh.
As mostly the simpliest Answer ist the best.
Of course I did NOT have Bridge CC installed. I must have assumed, it would
be installed together with PS CC in a Bundle...
Thank you very much
Best
2014-07-28 22:39 GMT+02:00 R_Kelly <[email protected]>:
Bridge open in Layers PS CS6/CC 2014-issue created by R_Kelly
<https://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View
the full discussion <https://forums.adobe.com/message/6591821#6591821> -
Can not open photshop CC 2014 ERROR could not initialize Photoshop because of a program error
Hi
I can not open Photshop CC 2014
ERROR
could not initialize Photoshop because of a program errorI've had the same error happen to me. I deleted the preferences file, updated JAVA, etc. none of which worked.
I've spent days systematically working to isolate the variable that seems to make Photoshop work one day and "not initialize" the next. I simply can't afford to stop work when Photoshop doesn't want to initialize due to: PSOWLListenerProxyBaseCocoa.mm : 52 : REQUIRE failed
Apologies, but I REQUIRE YOU TO INITIALIZE!
I think that I've isolated the problem. I have a dual monitor set-up. Sometimes I use the second monitor and sometimes I don't, sometimes monitor 2 is powered on and sometimes it's not. It's really the only thing with any variance on my system. I disconnected my second monitor. Then I clicked the Photoshop icon and the program opened...
I am running OS X 10.9 and Photoshop CS 5.1
There appears to be a link between Photoshop not wanting to initialize and Graphics Card / Monitors. -
Why do all the layers move in photoshop?
I don't know how this happened, but when I try moving one layer, ALL the layers in the group move with it! I did not link or merge these layers. I am working in groups, but I used to be able to select a single layer in the group and move it with no problem and if I wanted to move a whole group I would select the whole group.
Probably you have auto select groups checked in the move tool options bar.
-
When i change one layer, it changes all the layers!
i duplicate a layer. When i make any changes to the one layer....it makes the same changes to all the layers! it just started doing this. I deleted and reinstalled the app but it continues!
HELP!I always make a copy of the original and make changes on the duplicate layer. I am trying to crop the duplicate. When cropping, it crops all the duplicate layers.....no matter how many i have.
I've never had a problem before today!
Maybe you are looking for
-
There is a long line of displays at the bottom of the Firefox screen, all starting with "div#" or "iframe.rr" or "html" or "body" --- at the far right is a rectangular box with the word "Style" and an "x" right beside it. The x will not close this ba
-
Do I need to install crystal reports developer edition?
Hi, I tried to open a CR 8.5 reports in vs 2005 and it opened up fine. But when I try to preview the report it comes up with the error Failed to load Database information Details:The Database DLL 'crdb_fielddef.dll' could not be found. We have use
-
Hello Experts We have implemented sap in jan11 & all the expenses towards this software all booked in gl called advance expenses for sap,now for balance sheet we have to capitalize this expenses as huge amount. My queary is about how to transfer this
-
what is a good stage size for building a web site in flash...... I use to know the pixel dimensions but since I have been out of the loop I totally forgot. also I want to create "growing effect" in that I have these really artsy curly lines I created
-
Avoid calling OpenHandler when browsing folder using Explore
In sample.basicftp project , whenever user browsing the mapped folder using Explore (or Finder on MAC) , OpenHandler will be called muliple times, therefore the whole asset files will be downloaded from DAM serveral times. This makes the whole thing