Rendering and Artifacting problems on Mac OS

I am currently deveolping a game and after recently installing Flash Player 11 I have been getting rendering and artifacting issues along with mouse over states of the stage not being recongnized. The swf works fine in the flash preview of Flash CS5 and on a windows machine. The issue only shows up on Mac OS. The problem occurs in Chrome, Safari, and Firefox. This is also occuring on others Macs in the office as well. Link to the game http://bs-dezign.com/2011_Cyclones.swf. The viewing area is down the center of the stage aligning with hud.
Thank you for any help your can provide.
Ben

Welcome to our community
Please click the link below and pay close attention to the sticky topic you should have seen before posting here.
Click here
Cheers and good luck. Rick

Similar Messages

App Store Download pause and resume problem in MAC OS lion

Hello,
I am facing a problem in App Store Download pause and resume problem in MAC OS lion. My internet connection has a problem of disconnecting frequently
because of this App store can not complete a download as its resuming download from the beginning again please help me
Thanks in advance
-Ashok Athukuri

Dear Ashok, I also facing the same problem....It shows keep on waiting state.I will share you if have a solution for it...

Drag and drop problem On Mac OS

Hi guys,
I have a java applet code running well on windows and Linux.it consists of dragging files from a JFileChooser and dropping them to a JTable.
But the drag and drop feature doesn't work on Mac OS platforms.I don't get any errors log .simply files don't get dropped to JTable.
In my code i simply use a TableTransferHandler registered on JTable and then setDragEnabled() for JFileChooser.
What can i do to make my code run correctly on Mac OS ?
thanks for helping

For those interested, I got drag and drop working on the Mac. I got some help on the Apple-Dev forums, but basically, if you want to do your own drag and drop on the Mac OSX, you must have your transfer handler support StringFlavor. If it doesn't, it will not work.

MBP 2011 died and having problems reinstalling Mac OS

Hello,
Having problems trying to make my MBP start working again...
Tech info:
Early 2011 MBP, 10.6.6 preinstalled Mac OS X
2.3GHz Quad-core Intel Core i7
8GB 1333MHz DDR3 SDRAM - 2x4GB
256GB Solid State Drive
SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
MacBook Pro 17-inch Hi-Resolution Antiglare Widescreen Display
Was full updated up to date 3-4 days ago, so probably it was 10.6.7 before the crash.
I am pretty new to Macs and english is not my first language, so please excuse me if i use wrong terminology. Thanks.
It is pretty long story, the problem is - i can not install Mac OS X and make it work. The at the moment description of the situation is in Part 6, so you might want to skip parts 1-5, although reading those might be needed to understand the source of the problem or some details.
The Story:
Everything worked great for about a month but then multi-language kernel panic windows asking me to reboot computer poped up. Reboot didnt help and it kept asking me for more and more reboots after like 1 minute after it logs in into Mac Os.
I had 3 programms(among others) installed: Kaspersky(fully updated trial), Parallels(activated a month age oem version, runing Windows 7 as a virtual machine without using Bootcamp) and virtualbox(activated 2 weeks ago, not being used or opened for ~10 days).
Part 1 - After logging into Mac OS 2 messages always pop'ed up:
1) Kaspersky couldnt lunch in previous Mac OS startup(not current)
2) Parallels message: Its time to choose either to use trial Parallels or to enter activation key. Thats really weird because it was activated a month ago, was fully updated and worked great every day. When i tried to activate it again it just didnt accept the key which was accepted last time: the icon was still grey and not clickable, rechecked 10 times at that moment.
Ok, decided to uninstall both Kaspersky and Parallels via Safe Mode. Safe Mode is working fine. Removed programms by dragging them from application folder to trash can. Worked fine. Logged into normal mode. No messages appear except the "Hello, you had kernel last time", but still Kernel appear in 2-3 minutes. Logging in 32b mode(by pressing 32 while booting up) doesn't help either.
Part 2 - Rebooted. Booted from boot DVD and used Disk utility - nothing is wrong.
Went to safe mode again. Found Kernel Log and it showed me that the source of the error was some file of VirtualBox(at least it has virtualbox in its name. Virtualbox itself, again, wasn't launched for like 10 days) located in /extension folder. Removed virtualbox program by dragging it from applications folder to trash. Worked fine, but those files in /extension folder weren't deleted. I am pretty new to Macs, so i wasn't sure if those are really VirtualBox programm's files or Mac OS system files, so i decided to reboot and check if the problem still not fixed.
Result: You cant boot neither in normal mode or in Safe mode. It just doesnt react on anything.
No backups. Great.
Part 3. Booted via boot DVD. Worked fine. Checked if disc was ok - it wasn't ok. Tried to repair - cant repair, suggests me to reinstall.
Made a backup on external HDD(have it atm, so iа you need any info i can get from that backup to help you guys understand what happened - ask and i will give it to you asap).
Erased internal HDD with zeroes(1 row), it still has 4 files on it(around 300 mb), probably those are the files copied from Boot DVD, but i am not sure.
Part 4. Tried to install Mac OS from boot DVD. File system is for Mac os with journaled option activated. Installation process starts fine but at some point(around 25-30% while telling me its around 30 minutes left) the error message appears telling mу the installation couldn't be continued because it cant copy some files from DVD(no particullar files mentioned). Advising me to reboot and try again. Same thing happens always.
DVD disk was never used and even not unpacked before, looks fine...
Part 5. Inserted the boot DVD in another mac, made a copy via disk utility in mac os(without booting using this disc), copied it to external drive where the backup is. So there are 2 files on external drive: backup.dmg and starupDVD.dmg.
Pulled in the external hdd to MBP and tried clicking option key to choose him to boot from HDD. Nothing happens, just mouse appears without any windows where i can choose the boot option. Weird. Tried all 3 usb ports, same problem. Tried to put the DVD disk and click option key - both mouse and window appears, but only DVD boot option avaivable.
Tried to reset RAM by clicking Command-Option-P-R keys. Reset went fine(the sound and so on), but it didn't effect on anything.
Part 6(this very moment): So here i am. Have erased internal HDD with 4 files in it(around 300 mb, dont know what), boot DVD which came along with MBP with 10.6.6 MaсOS, external HDD with the same DVD and backup.
Disk utility says my internal HDD is ok.
Clicking option key doesnt make my MBP see external HDD while it is plugged in any usb port, only mouse appears. Same option key sees dvd disk if it is plugged in and boots normally.
You can see and work with external HDD if you boot from boot DVD.
Installation process starts both fine on internal and external HDDs. On internal it crashed with "cant copy files" message at ~20-30%(~30 minutes left), on external the screen just turns grey with moveable mouse on it without any messages at around 30%(~40 minutes left).
External HDD - Western Digital My Passport Essential SE 1TB USB 3.0
Internal HDD - 256gb SSD which came from Apple (sorry for calling it internal HDD)
Think its pretty much it...
What should i do to make this thing work? Pretty much desperate already.
Thank You for any help.
Sincerely yours,
Alexander.

Just one more thing - the description of what i did while first Kernel appeared:
Happened 2 days ago. Wasn't turning it off for like a day, only sleep mode by closing it. Worked fine all day, wasn't doing anything, except for checking mail 2-3 times and having windows 7 virtual machine opened but doing nothing, everything was going fine. Then closed it without turning off.
Opened 3-4 hours later, everything was working fine for 30 minutes of checking mail, then Kernel appeared. After that pretty much everything i did is described in part 1-5.
Note: all the time MBP was connected to internet via wifi, so updates to both MBP and virtual machine of all programs were possible.
I only shared downloads and desktop folders, so windows couldn't have access to system folder of Mac Os.
Hope this might help...Thanks again.

ReportViewer 2014 PDF rendering and search problems (glyphs / rectangles when text copied to MS Word)

I'm using ReportViewer from MSSQL 2014 express in my experiment, use RDLC /local reports/.
I use slovak char-set (šťďňľřôä) - international chars.
When rendering to PDF I use HumanReadable PDF + Use font sub-set embedding.
The report is viewed on the same server as it is generated.
The generaed PDF prints correctly,
but some words cannot be found inside PDF /with ctrl+f/ and
when I copy paste the content to MS Word, those words (it§s chars) that cannot be found are replaced by
rectangles.
Any clue why it this so and how to avoid this issue?
Is there a difference between rendering reports locally /via MSSQL report viewer/ or on the server?
Thanx.

Adobe Professional 8.1.2 - similar problem. Word converted to PDF. Three paragraphs separated by a single space line break. When paragraphs are copied (either with or without line formatting) the lines do not appear between the paragraphs in the pasted material (in Outlook or Word). Only way I can find to make them appear is to make each paragraph a numbered list. Then it works. What is going on? I have tried different formatting options in Word.

After effects cc incomplete renders and other problems after installing 2014

i left an almost 5 minute long project rendering last friday only to find out this morning that the first 55 seconds where left out of the render, with my work area set to the entire timeline. in the past i've had some other issues such as no audio when setting the output to audio or corrupted audio when setting it to on.
i'm not entirely positive, but i think this problems started when i installed 2014 a few weeks ago.
anyone experiencing similar issues, do you find a correlation between them and having both cc and 2014 in the same machine?
thanks,
d.

There's no error on the log file, as far as the program concerns it rendered everything correctly.
My machine is an imac (iMac12,2) with 32gb ram and AMD Radeon HD 6970M with 2048 mb of VRAM.
My current settings (for approvals) are QT with H264 compression with audio output set to Auto and I'm rendering at half res, which in this project is 1024x1024 px, the render is taking approximately 4 and a half hours with MP off, last friday I tried it on and after 7 ours it only had less than 25% done and it said it still had 27 hours to go, so I canceled it and switch to MP off instead, it finished the render (incomplete, I found out today) in 2 hours and 38 minutes, plus 42 minutes for the missing portion this morning, which came with no audio.
I haven't rendered uncompressed or prores yet, but I will be doing tonight to see if that yields a different result.
Is this enough or you need more specifi data like solo switches settings, guide layers, etc?
Thanks,
D.

Need help solving listener and Oracle problems with Mac OS X 10.4 "Tiger"

I have Oracle 10g working on Mac OS X 10.4 "Tiger" except for the listener and Oracle net 8 configuration. I have not been able to get the Oracle listener to work with my built in Mac Airport wireless network card or built in ethernet card. I keep getting the errors
connection refused cannot start listener. Can anyone offer help?
Thanks
Ben
[email protected]

Hi Ben,
how does your listener.ora look like ?
Mine is:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ronald-g4-eth)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = ronald-g4-wifi)(PORT = 1521))
and listens to the ethernet and airport address.
When do you get the problems ?
regards,
Ronald
http://ronr.nl/unix-dba

Mail, Facetime and Airdrop problems with Mac OS 10.7.2

Hi everyone,
I downloaded Mac OS 10.7.2 on my Macbook pro but i've many problems. Mail, airdrop and facetime don't work anymore when i want to use them :s
If someone has an answer i take it
Goodbye - frenchie girl

I precise : on the last Macbook pro 13" and MacBook Air too

Asha 501 and USB problems with MAC OSX 10.9

I checked everywhere and I could not find any threads about this problem, so I'm asking here, in the official support forum.
The problem is:
Connecting the Nokia Asha 501 to the mac (via USB cable), and selecting "external memory", the memory card is mounted and I can browse the contents, BUT the photos show corrupted. I even lost some, because I tried to open them in the Preview app on the mac. (take a look at the attached photo of this post, a screenshot clearly showing corruption)
Importing the photos via Bluethoot works, and the photo on the phone are showing fine. The memory card is okay, I checked with an external card reader.
Also:
- This problem does not show with Windows 7/8
- This problem does show with other Mac OS X
The phone is updated, I flashed it with the Nokia Software Updater and I formatted the memory card.
Any help?
Attachments:
Schermata 2013-11-11 alle 17.13.07.png ‏285 KB

I have the same problem. Would be great to have a solution. I have some photos on the phone I'd like to use and keep, but at the moment they are stuck on the phone.
John

Rendering and lagging problems with FCP X

Hello,
I am working on a Mac OS X Lion 10.7.3 (11D50b) - Processor 2.4 GHz Intel Core i5 - Graphics NVIDIA GeForce GT 330M 256 MB and Memory 8 GB 1067 MHz DDR3.
My 30 minute project has been completed but every time I reopen it, there is a short sequence that always needs rendering. It takes a very long time for this sequence to render and FCP X regularly crashes and slows down. The software is very slow and sometimes non responsive.
This is my first try with FCP X. I've been working with FCP 6 and changed to FCP X recently. I’ve imported a lot of jpg and mp4 files. I import with proxy and optimized files and analyzed preferences. I’ve tried running my project with my hardrive as well as my external hardrive.
FCP X is generally lagging and unstable. It also slows down my computer.

mp4 files. I think that is not a good idea to use that format with FCPX. With my camera I have the options to use mov. (native for FCPX) or mp4. I use mov.

Final cut pro rendering and exporting problem

I imported all the video files from my DVD into Final Cut Pro.....and then when I brought them into Timeline...it asks for rendering..even when i did that it is taking too long to be rendered.....also when I put that from 'Safe Rt' to 'Unlimited RT' then it is showing error of dropped frames......so what SETTINGS and PREFERENCES should i use in Easy setup so that this error doesnt occur...and also I dnt have to render the complete DVD videos files of around 2-3 hours in it....Also when I made a new sequence I kept the setting as DV Pal 24 fps.....so which setting should i use????

Sounds like when you converted the footage from the DVD, you converted to the wrong format, or the wrong specs.
With DVD VOB files, normally one would use MPEG Streamclip (freeware) to convert the VOB files to QuickTime DV/DVCpro with AIFF audio at 48khz, 16 bit. In FCP you'd use the DV/DVCPro Easy Setup.
-DH

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

What is the EFI boot option for mac, and why is my Mac having problems with it?

I just updated my 2012 Macbook Pro to 10.9, and I am having some problems with it. I have a bootcamp partition on it and regularly awitch between mac and windows, and 2when I went to switch nack to my Mac side, It said EFI boot nstead of the regular Macintosh HD. When I choose that option, the aple logo comes up and progress bar appears. Once the progress bar finishes, the computer shuts off and doesnt do anything. When I turn it on again, it just starts the efi boot again and shuts off when it finishes. Why is this happening and what can I do to fix this. All help is extremely appreciated.

That usually happen because the OS X partition got corrupted. Abiotu the only fix for that is to reinstall OS X and to do that you might have to completely erase the drive or repartition it as one partition. Which will wipe out the Windows side. So backup everthing you can before you start.
nisuteng wrote:
Hi, did you fix the problem?
I have the same problem... and my warranty has expired...
please help~~
thanks!!

Rendering and Artifacting problems on Mac OS

Similar Messages

Maybe you are looking for