Rendering constraints- cpu, memory

Imported a quicktime movie to FC (FC5.1) that needs to be rendered. It's taking about I5 minutes to do it. Looking at the CPU and memory monitors, I am only using about 30% and 50% respectively. Can I change any settings to optimize and speed this up or are there other constraints I'm unaware of?
Thanks.

How to get the CPU memory in JAVA?please send the
sample code for that..,No.
How to View the Memory Streaming(when do you do any
process) in JAVA?please send the sample code for
that..,No.
How to Allocate the Memory for one Process and
Remaining Memory for another Process in JAVA?please
send the sample code for that..,No.

Similar Messages

ISE dashboard - CPU, memory - data not available for PSN

Hi All,
Has anyone seen the ISE dashboard not showing stats for CPU memory for PSN's ? Admin node cpu and memory displays ok.
How is this data shared between the nodes ?
I did have some firewall issues between admin and PSN but this is now solved. I did note the same issue even when nodes were on same L2 network.

Confirmed this issue was caused by syslog dropped by firewall. Symptoms included dashboard wasn't updating for that node, and also no auth logs getting back to monitoring node.
ASA was permitting UDP 514 (syslog) but not UDP 20514.
I'm a bit confused on UDP 30514. In the guide it also says 30514 is syslog in one spot, and radius in another.

Alerts for CPU,Memory Utilizations

Hi all,
In the last few weeks we have been encountering, Server Re-starts due to memory Shoots ups.
We are planning to have alerts for CPU, memory utlizations.
These would be triggered before a Standard Threshold is reached. This would avoid issues after threshold in production environment.
Are there any pointers, blogs etc available on how to achieve the same.
Thanks in advance,
Best regards
Abhishek

Basic alert funtionality of XI won't help. You must have CCMS configured in your landscape. It could be then used to raise alert for such issues. Have a look here
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c7270b-1111-2a10-198b-cf7adc86d695
Regards,
Prateek

Monitoring of CPU Memory backplane for SG-300

Hi,
How to monitor of CPU Memory Baclplane for SG300-28 (SRW2024-K9-EU)..?
Thanks for your Input,,,,

See this link for the list of supported MIBS:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids12/cliguide/clisnmp.htm#wp1042408

Operating temperatures for cpu/memory

This may be much ado about nothing. Had recently upgraded hard drive on my Early 2011 MacBook Pro 13" and the fan ran nearly all the time. So I looked around for notebook coolers for one solution. I had also ordered a memory upgrade to 8gb from the stock 4gb. The new drive is a Hitachi 500gb 7200rpm 2" drive w/32mg cache. I've read others before say various 7200rpm drives sometimes ran hotter and caused increased fan activity, so in a way wasnt surprised.
So, next thing I did was buy an app from the Mac App Store called Temperature Gauge. It's a nice little utility and shows temps for many components like cpu, memory, battery, and others. My fan was running around 4600rpm and very loud most of the time with the new drive. That is until I upgraded memory to the 8gb. Now the fan speed has dropped from around 4600rpm to 2000rpm and is back to its original silent operation.
The util sets threshholds for component temps and in particular I was curious if anyone knew what the operating range of temps should my cpu or memory be within? Is there any way to find out for ex. if the cpu is at 119 degrees Fahrenheit is that within normal specs?

119º F is excellent, the RAM helped as it's not swaping memory to the hard drive as much as before.
I upped mine to 16GB, really sweet to not have to worry until I run more than three operating systems at once

Cisco ISE CPU/Memory Upgrade

Hello Everyone,
I have a Cisco ISE in Vmware environment and i need upgrade the cpu/memory in my Policy Service Node.
How i can perform this? Its only increase the memory/cpu in vmware machine environment?
Tks.

Rafael,
That would be what I would strongly recommend since it is not documented on what the best practices are from Cisco and with ISE database being sensitve to how the hard disk are presented, I would strong suggest starting fresh in order to rule out any stablity related issues (if you face them) in the future.
Thanks,
Tarik Admani
*Please rate helpful posts*

Just opening DW takes up 50% CPU memory

just installed a trial edition of DreamweaverCS6 and tried to run it. When the dreamweaver opens up and the home page was showing it immediately takes up 50% of CPU memory. It makes the system to work slow. someone please give a solution to this. Thanks in advance.

From this mail thread (http://forums.adobe.com/message/4411774:)
High CPU usage in Code view issue has been resolved for Mac and the new build 12.0.3 is available for update for Non-Creative Cloud Members too. Please update to the latest build.
In Dreamweaver use menu 'Help' > Updates to get the latest build 12.0.3, The above update is available for both Windows and Mac.
If you are using a trial version, there isn't much that can help you unless you upgrade to the cloud.
Thanks,
Preran

Historical CPU/Memory utilization data and xm top interpretation

Hi All,
Can we get historical CPU/Memory utilization data on domU server. xm top command give real-time data.
secondly, how to interpret xm top command output.
xentop - 02:28:25 Xen 3.0-unstable
3 domains: 3 running, 0 blocked, 0 paused, 0 crashed, 0 dying, 0 shutdown
Mem: 16772032k total, 13863520k used, 2908512k free CPUs: 4 @ 2327MHz
NAME STATE CPU(sec) CPU(%) MEM(k) MEM(%) MAXMEM(k) MAXMEM(%) VCPUS NETS NETTX(k) NETRX(k) VBDS VBD_OO VBD_RD VBD_WR SSID
domain1 -----r 18153551 98.7 6299520 37.6 6307840 37.6 2 2 14008639723 134647867139 2 0 7405453 7224743 0
domain2 -----r 13574751 31.2 6299520 37.6 6307840 37.6 2 2 815959711 780254006 2 0 2732 2658 0
Domain-0 -----r 3807938 9.6 819200 4.9 no limit n/a 4 8 0 0 0 0 0 0 0
Does it implies that there are 2 virtual CPUs configured for guest(domain1), which at this moment 98.7% utilized. Doesn't it shows there is capacity problem?
In virtualization, are virtual CPUs dedicated to guests, or CPU cycles are available on demand. If this is the case, then one guest high utilization can slow down other guests as well.
Thanks,
Neeraj

Hi All,
Can we get historical CPU/Memory utilization data on domU server. xm top command give real-time data.
secondly, how to interpret xm top command output.
xentop - 02:28:25 Xen 3.0-unstable
3 domains: 3 running, 0 blocked, 0 paused, 0 crashed, 0 dying, 0 shutdown
Mem: 16772032k total, 13863520k used, 2908512k free CPUs: 4 @ 2327MHz
NAME STATE CPU(sec) CPU(%) MEM(k) MEM(%) MAXMEM(k) MAXMEM(%) VCPUS NETS NETTX(k) NETRX(k) VBDS VBD_OO VBD_RD VBD_WR SSID
domain1 -----r 18153551 98.7 6299520 37.6 6307840 37.6 2 2 14008639723 134647867139 2 0 7405453 7224743 0
domain2 -----r 13574751 31.2 6299520 37.6 6307840 37.6 2 2 815959711 780254006 2 0 2732 2658 0
Domain-0 -----r 3807938 9.6 819200 4.9 no limit n/a 4 8 0 0 0 0 0 0 0
Does it implies that there are 2 virtual CPUs configured for guest(domain1), which at this moment 98.7% utilized. Doesn't it shows there is capacity problem?
In virtualization, are virtual CPUs dedicated to guests, or CPU cycles are available on demand. If this is the case, then one guest high utilization can slow down other guests as well.
Thanks,
Neeraj

CUCM OIDS (CPU, Memory , IO are not available)

Hello CISCO,
The below CUCM OIDS (CPU, Memory , IO are not available)
Can you please review and confirm they are valid from you end please?..
cpu_idle cpu_sys cpu_usr memory_free._total memory_total._total memory_used._total os_iorawin os_iorawout os_loadavg.2 os_loadavg._total os_rawcontxts os_rawinterps swap_free._total swap_total._total swap_used._total
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.11.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssCpuIdle.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.10.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssCpuSystem.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.60.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssRawContexts.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.59.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssRawInterrupts.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.4.4.0: .iso.org.dod.internet.private.enterprises.ucdavis.memory.memAvailSwap.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.4.3.0: .iso.org.dod.internet.private.enterprises.ucdavis.memory.memTotalSwap.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.9.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssCpuUser.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.4.6.0: .iso.org.dod.internet.private.enterprises.ucdavis.memory.memAvailReal.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.4.5.0: .iso.org.dod.internet.private.enterprises.ucdavis.memory.memTotalReal.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.58.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssIORawReceived.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.11.57.0: .iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssIORawSent.0 = No Such Object available on this agent at this OID
vg_snmp_driver: bad response for .1.3.6.1.4.1.2021.10.1.5.2: .iso.org.dod.internet.private.enterprises.ucdavis.laTable.laEntry.laLoadInt.2 = No Such Object available on this agent at this OID

Whiile 4-core cpus are common in home machines still, 4 cores is pretty low nowadays in performance servers like a R730. If you aren't seeing an option for a 4-core cpu, it is likely no longer available.Remember, just because it SUPPORTS 4-core and greater cpu's doesn't mean that they OFFER them anymore.I'd guess (without actually speccing one out) that 6 or 8 is the lowest-core CPU available for a R730 now.All I see on this spec sheet for the R730 is "Intel Xeon processor E5-2600 v3 product family". If there is a 4-core in that family, that doesn't mean it is going to be sold with the server.
R730 Spec SheetDoes your client need a 4-core machine? Seems a bit behind the times.
dharmendrajaiswal wrote:While dealing with Dell & HP for our customer requirement, received revert that 4 cores are no more available with recent servers.What does...

CPU/memory usage of AIR application under Mac 10.4.10

As my AIR application uses a lot of CPU/memory under Mac
(seems better in Windows), I decide to do some basic testing. I
create several applications with different level of complexities.
Below is a table of CPU/memory usage when the application is simply
sitting there. A brief description of the application can be found
in the end of each line.
Here are some results:
[1] Even for an empty application, CPU usage is not zero
(most non-AIR application has 0 CPU usage when doing nothing). Also
the memory usage is huge, comparable to Finder on my computer.
[2] Empty application has 7 threads running.
[3] Indetermined progress bar costs a lot of CPU; and I guess
any other animation costs a lot of CPU too. But if they are
invisible they are fine.
[4] running timer costs CPU.
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE
VSIZE application
10093 adl 1.8% 0:01.85 7 100 292 15.0M 13.8M+ 22.8M 444M
empty
10094 adl 1.9% 0:01.55 7 100 299 15.2M 14.0M+ 23.1M 444M
label
10097 adl 1.9% 0:01.48 7 100 302 15.3M 13.4M 23.7M 445M
progress bar
10095 adl 5.7% 0:02.40 7 100 302 15.4M- 13.2M 23.5M 445M
progress bar (indetermined)
10125 adl 15.9% 0:03.66 7 100 304 15.7M- 13.4M 23.9M 445M 5
progress bar (indetermined)
10126 adl 29.7% 0:10.39 7 100 325 16.7M+ 13.4M+ 24.9M+ 445M
10 progress bar (indetermined)
10128 adl 1.9% 0:01.34 7 100 324 16.1M 13.7M 24.3M 445M 10
progress bar (indetermined), visible=false
10136 adl 1.8% 0:00.76 7 100 323 16.5M+ 13.9M+ 24.7M- 450M
Empty datagrid
10147 adl 1.9% 0:01.60 7 101 328 16.1M 13.8M+ 24.5M- 447M
TabNavigator with two empty VBox children
10138 adl 1.8% 0:01.59 7 100 372 19.4M 13.9M 27.7M 453M
datagrid with 10000 simple rows
10131 adl 3.1% 0:02.38 7 110 348 25.7M 19.3M 34.8M 458M 10
Empty native windows
10143 adl 1.9% 0:00.99 7 100 296 15.1M 13.9M+ 23.2M- 444M
Timer, delay = 100ms, calling an empty function
10145 adl 4.1% 0:02.35 7 100 298 15.0M 14.0M+ 23.2M- 444M
Timer, delay = 100ms, calling function update label position
As to my own application, it's much bigger than these simple
ones. The CPU usually stablizes to 20% and VSIZE is about 1G. There
is no timer running. When I leave the application open for a few
hours, the application will eventually freeze and I have to kill
it.
I am wondering if there are any articles or documents
explaining AIR's CPU/memory usage. And also if AIR is planning to
improve the performance in the next release.

James, thank you for the very fast answer! I did various tests on the weekend on my computer and computer of my friend.
And I can say, that Debug flag doesn't affect memory consumption. They still eat memory. My steps to reproduce are as follows:
(Windows 7 32 bit)
Photoshop CS5:
1) set HKEY_CURRENT_USER\Software\Adobe\CSXS2Preferences\PlayerDebugMode to 0
2*) check HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\CSXS2Preferences (just in case)
3) Compile HelloPhotoshop example to ZXP and install via Extension manager
4) restart computer
5) Run Photoshop CS5 - Memory consumption: 100 096 KB
6) Open HelloPhotoshop and close it 10 times
7) Memory consumption: 155 840 - 5,574 MB per one close/open
Maybe a garbage collector is expected to run and free this memory, but it never happened in my case. The memory pool was increasing to 1 GB when I was working with one of my panels - with no documents open in Photoshop
In InDesign I tried the same thing with HelloInDesign ( I had to close the panel completely and then open with Window | Extensions | HelloInDesign)
Memory consumption on start: 118 516
Memory consumption after 10 open/close cycles: 197 516
It's 7,9 MB per one close/open
It's the simpliest panel test. When I'm using AIR libraries the memory usage is increasing a lot faster.

CPU/Memory Usage increases when loading SWF files in AIR.

Hi,
We face the below mentioned problem. Would be great if someone could help us.
Due to problems with uploading the attachment here, please send a email to the following email-id ([email protected]) and I shall send the attachment in response.
CPU/Memory usage increases drastically while moving the SWC components and loading the SWF Files.
"Problem Description" - On executing the sample application, a window with multiple objects is shown. The loaded SWC components in flex consume too much Memory and CPU cycles. This is visible in TaskManager. On dragging one of the object, CPU / memory usage increases drastically.
"Steps to Reproduce" -
Draggable window is placed at the bottom in the sample application with Text indication.
Drag the indicated window.
"Actual Result" - System's CPU usage increasing drastically around 50% to 60 %.
"Expected Result" - Drastical increase in memory\CPU should not occur.
"Any Workarounds" - No"
Thanks in advance.

You can control your external swf from your main.swf in the following method:
loadswf(clips[0]);
function loadswf(tmp:String):void{
    passedString=tmp;
    ldr= new Loader();
    ldr.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressListener);
    ldr.contentLoaderInfo.addEventListener(Event.COMPLETE, swfLoaded);
    ldr.load(new URLRequest(animPath+tmp));
    function progressListener (e:ProgressEvent):void{
        ploader.visible=true;
    function swfLoaded(e:Event):void {
        mcExt = e.target.content as MovieClip;
        ldr.contentLoaderInfo.removeEventListener(Event.COMPLETE, swfLoaded);
        mcExt.addEventListener(Event.ENTER_FRAME,onEnterfn);
        ploader.visible=false;
        addChild(mcExt);
function onEnterfn(e:Event):void{
    var num:int=mcExt.currentFrame;
    switch(passedString){
        case clips[0]:
            if (num==1) mcExt.play();
            if (num==9) {
               mcExt.skipmc.addEventListener(MouseEvent.CLICK,skipfn);
                function skipfn(e:MouseEvent):void{
                    mcExt.stop();
                   mcExt.removeEventListener(Event.ENTER_FRAME,onEnterfn);
                    gotoAndStop("help");
            if (num==mcExt.totalFrames){
               mcExt.removeEventListener(Event.ENTER_FRAME,onEnterfn);
                gotoAndStop("help");
            break;

YSLoader and distnoted using full cpu memory resources

After syncing my iPad in a Win 8.1/iTunes 11.1.4 desktop, YSloader.exe and distnoted.exe processes remain running and using up to 90-100% of computer CPU/memory.
The only way to solve it is to manually kill the processes or, in distnoted case, rename the file in order to not load it.
This problem appeared recently, after working fine for ages.

Ive been wondering for over a year now how to fix this issue. After numerous hours of research i stumbled across an apple discussion forum about AppleMobileDeviceService and APSdaemon using an extreme amount of cpu resources and not stopping unless manually killing it. Well the solution they used was to:
1. Open command prompt (run as administrator)
2. Type netsh winsock reset and hit enter
3. It will tell you to reboot your computer, do it.
So i followed those instructions with kind of a what the **** it cant hurt attitude, and after doing that the problem of ysloader and disnoted32 hogging cpu space and having to manually close them everytime no longer exists, well for the last 48 hours anyways. If the problem pops back up I will edit this post letting you know that this was only a temporary fix, but for the time being it is working great.

CPU,MEMORY UTILIZATION

hi,
What should be the desirable percentage of cpu and memory utilization

You must gather few stats related to your
-CPU utilization
-memory
-swap space and other system resources and maintain thm for your help so as to set thresholds for your system's optimal utilization and peakloads.
Generally on multiple CPU box its considered 90% CPU utilization for ~15-30 mins is area of consideration,though mometarily spikes are tolerable but should not exceed ~5 mins.This way you can sort out the issue related to CPU ,Memory etc resource utilization.
Hope this could provide you insights of the Utilization
~jatin

Cpu, memory etc requirements for 10gAS

I intend to install 10gAS (BI + forms) because I want to implement discoverer 10g with E-business. My question is
(1) where can I get a document on the cpu, memory, disk space etc requirement for installing AS 10.2.1.0.2 on for example RHEL 5.0.
(2) My E-Business suite is on solaris.....but I want to put the 10gAS Discoverer 10g on RHEL. Do you see any problem?
Thanks
Edited by: user547023 on Sep 16, 2008 6:52 AM

http://download.oracle.com/docs/cd/B14099_19/getstart.htm
The link above is exaclty what I was hoping for. The books therein detail all the requirements for all operating system. I am just posting this for the benefit of people that may need it later on.

Cpu , memory , temperature oid "quick and short way "

Hi all,
i am looking to find out quick way to find oid value for cpu , memory etc for ISR (3800 , 2800) , 7200 etc
however searching "cpu" snmp object navigator search box is displaying about 400 results which is not a convienent way to find out.
1 ) do the oid value for measuring one , 5 min and 5 sec cpu differers platform to platorm ? Are their any specific OID values that i can use to find cpu (one min , or 5 minutes ) for IOS routers ?
as i have tranlated standard " cpmCPUTotal1minRev " into oid value and tired to use it with EEM snmp oid event detector
and got the following debug
It give me error on 7200
*Mar 5 00:56:20.895: fh_fd_snmp_oid_val_fetch: storing OID value
*Mar 5 00:56:20.895: snmp_entry_value_check: OID unavailable, value check skipped
2) is their any way to search oid values on the box it self by a show command ...

119º F is excellent, the RAM helped as it's not swaping memory to the hard drive as much as before.
I upped mine to 16GB, really sweet to not have to worry until I run more than three operating systems at once

Rendering constraints- cpu, memory

Similar Messages

Maybe you are looking for