Rendering Error Message

In PP CS3, rendering with Adobe Media Encoder, I got this message:
Premiere Pro has encountered an error.
[..\..\Scr\AudioRender\StackAudioBuffer.cpp-58]
Anyone know the cause and how to prevent this error? I'm doing test renders as I add sound effects to something I'm working on.

Not sure where in the Environment these Stacks might be, but I'd wonder if something is not getting in the way regarding your resources, in general. If so, the tips in this ARTICLE might be useful for starting an editing session.
Now, it might be useful to give the full specs. of your Project, and maybe a bit more about the Assets, especially the Audio Assets. You say "WAV," so I will assume that these are PCM/WAV's. Is that correct?
I do not recall of hearing of any issues with regard to Audio Transitions, but might have missed something. I regularly have hundreds of Constant Power Audio Crossfades, and have never gotten any errors. Doesn't mean that Constant Gain Crossfades could not cause such, or that there is not some limit on the number in a Sequence. I've just not encountered this.
Though I doubt that it would figure in here, you might also want to update your audio-card's/chip's driver, just to be sure.
Good luck,
Hunt

Similar Messages

Rendering error message with "Bad TV" effect

Hi Everyone!
I am receiving a error message when rendering: "the effect "bad tv" failed to render: Your hardware cannot render at the requested size and depth"
My computer has been setup to handle the demands of FCP- 2x3 GHz OCTO with 10 GB of RAM. Why is this happening? Does this mean I have to spend $1500 for a graphics card? Rather not...
Here's more info about what I am trying to accomplish:
(Media: DVD imported/exported with MPEG Streamclip to HDV 1080i60.
Sequence settings: HDV 1080i60) I have my reasons for setting my edit up this way I promise!
Editing for a commercial with some poor footage from 4th Gen. DVD. Instead of trying to make the video look the best, I've decided to go the other way and to make it look worse with Bad TV effect. I have layered 6 files of the DVD to create ghost or duplicate images both on the right and left side of the original footage to take the eye away from the crappy copied DVD footage. When I tried to render out the footage the error message comes up each time.
THANKS!!!

I think your confusion is based on the fact that you are interchanging the graphics card, and a video capture card. They are not the same thing.
The graphics card or display card is the piece of hardware that drives your monitor. It's also used to enhance graphic programs like Photoshop, Motion, etc. It's also what is used to render the cool 3D graphics of games like Halo, and Call of Duty. A good one with an 8K texture limit is around $225 or so.
A video capture card is a piece of hardware that allows you to capture full frame SD and HD (depending on the card) through an SDI or other cable. It is a way to capture the video signal as opposed to the video file (as Firewire does). These cards can also send full res signals out to a deck or broadcast monitor.
As far as your gfx card goes, I think the 2600 is a 4K texture limit. Buying the ATI 3870 or 4870 (if your computer is compatible) will give you an 8K texture limit.
To send full resolution HD out to a deck or monitor, you will need a capture card. Firewire is typically used to export DV DVCProHD or HDV. There are products out there that use firewire to IN/OUT other formats such as ProRes, but it's still a piece of hardware you have to buy. MOTU has a product like that. AJA has the IO that uses a firewire connection. There are others as well.
I hope this clears up some of your confusion.
Andy

Rendering error message:File in use

Please help, I am trying to print a project to video but in the rendering process I get the error message: File in use by this or another application. I have no files in use in another application. MAC support is unfamiliar with the message and recommends uninstalling FCP and re-installing. Any other ideas as I am afraid of losing the project. Any help would be appreciated. Thanks, G.
G5 Mac OS X (10.3.9) FCP HD 4.5
G5 Mac OS X (10.3.9) FCP HD 4.5

If you rerender does the error go away? I know this comes up with Tiger and spotlight. I just disabled spotlight for my media drives. It does not look like you are running Tiger, usless your auto info has not been updated.
If you cannot render at all, then is is not spotlight.
I would try braking the timeline down in 1/2s. keep going until you get a render that works. You may be able to track down the exact clip that is having a problem. Good luck
Bob

IE10 rendering error in UWL sub dialogs like connections status

Hi,
I am using a custom framework and added the browser document mode iview with the sap-ie=EmulateIE8 parameter as described in various blogs. I also added this parameter to iviews where applicable but there are still rendering error messages in some UWL dialogs that are opened through the UWL dialog itself e.g. the connection status window or the delegate window.
Where can I add the sap-ie parameter to have these dialogs also rendered without warning?
Thanks for any helpful hints in advance!
Regards Stefan

Hi Stefan
I hope you are well and many thanks for using the SAP Discussion Forums .
I'd like to re-emphasize the importance of what Donald mentioned above:
Have you tried setting IE to use compatibility mode?
Tools->Compatibility View settings - Add your Portal URL in the list
In addition to this there are some important points to highlight regarding the utilization of IE10.
Kindly see the below SAP Note Documentation (Compatability Section also Included).
SAP Note 1785100 - Internet Explorer 10 Release Notes
I would like you to review all the content available on SAP Note 1785100. As you can see in the Symptom section of the note, it also summarizes the Internet Explorer 10 limitations and system requirements that are known in some areas, including Web Dynpro and JAVA which is thetechnology used by the UWL iViews.
- SAP Note: 1718465 - IE10 rendering issues with Web Dynpro Java
From researching previously reported scenarios similar to the one that you are experiencing it seems the activation of compatibility mode has been used as the resolution before. Another point of analysis is the browser window zoom and its current setting, is it set to 100%?
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer
Follow Troy Cronin

IDVD 6 project rendering error

I have done over 40 DVDs on my old powerbook, never had problem. Got my MBP 2.2 a week ago, tonight I render an image file as usual, it stops at 30% and shows rendering error message, what could be the problem? Thanks Alex

I tried it again and same error message
Error during rendering/encoding
There was an error during rendering/encoding of the menus/slideshows. Burning process canceled.
I am not burning the Dvd yet, this is how I do it. When my iDVD project is complete, I hit Shift+Apple key+R to render and make an image file, after that I burn DVD. I render this project on the MPB harddrive not my lacie hd, I do not have slideshows on this project either. Like I said, I have done the same thing too many times on PB without a single problem, any other thoughts? Thanks Alex
Macbook Pro 15.4'' SR 2.2Ghz Mac OS X (10.4.10) Mini iPod / Lacie D2 triple 250 ext. drive/ Lacie D2 DVD±RW
Macbook Pro 15.4'' SR 2.2Ghz Mac OS X (10.4.10) Mini iPod / Lacie D2 triple 250 ext. drive/ Lacie D2 DVD±RW
Macbook Pro 15.4'' SR 2.2Ghz Mac OS X (10.4.10) Mini iPod / Lacie D2 triple 250 ext. drive/ Lacie D2 DVD±RW

Error message during burning: Error during rendering/encoding

Hello,
I am using iDVD 6.0.2 to create a DVD. I have pictures and videos. The videos are in .ASF format and they are played on Quicktime on my computer.
Anyway, when I go to burn the DVD, it goes through the slideshow fine. But then, once it starts videos, it stops and the following error message shows up:
Encoding Video
Error during rendering/encoding
I am using a Memorex DVD-R (8x, 4.7 GB, 120 min video) dvd. Is there any way possible I can fix this problem? I really need this DVD soon. Thank you so much.

Best Buy and Office Depot carry Verbatim by me. Use only DVD-R, not DVD+R.
My guess is that .ASF file...........
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

PP CS3 Error Messages when rendering

I'm having an issue with Premiere Pro CS3, and am receiving a variety of error messages, along with occasional accompanying crashes. I will post my system specs following a detailing of the issues.
I have read the DV primers, the FAQ, the Premiere Pro help document and was unable to find a solution to the issue.
In addition I have searched the internet:
http://www.google.com/search?q=[..\..Src\PPixHandleUtilities.cpp-114]&hl=en&safe=off&biw=1 280&bih=607&prmd=ivns&ei=y-vvTebvH6qt0AHp6b32DA&start=10&sa=N#q=[..\..Src\PPixHandleUtilit ies.cpp-114]&hl=en&safe=off&prmd=ivns&ei=pwbwTeXSCIq5twfc4LTCCQ&start=0&sa=N&bav=on.2,or.r _gc.r_pw.&fp=711da0863f755a&biw=1280&bih=584
And have searched the Adobe forums as well:
http://forums.adobe.com/search.jspa?resultTypes=DOCUMENT&resultTypes=MESSAGE&resultTypes=C OMMUNITY&resultTypes=TASK&resultTypes=PROJECT&resultTypes=SOCIAL_GROUP&resultTypes=COMMENT &peopleEnabled=true&q=[..\..Src\PPixHandleUtilities.cpp-114]
None of the suggestions, including the various links with additional information given, has helped in this matter, and I was wondering if anyone else has ever figured out this issue.
I currently have a HD 1920 X 1080, 29.97 fps, 00;23;43;00 minute film edited in Premiere Pro.
I have 4 video tracks (including 1 transparent), and 3 audio tracks.
I am attempting to render out a .mov with H264 compression with 100% quality at 1920 x 1080 using the Adobe Media Encoder.
I've also tried rendering smaller and less quality wuicktimes with the same results.
All of the imported files are quicktimes .mov's rendered out of Adobe After Effects CS3, using the Photo-JPEG codec with no (best quality) compression.
The premiere project file is located on an external USB hard drive (my C drive is full), amd the scratch disks are directed to that same drive, with more than 60% free space on it.
I have checked for gaps in between clips/sequences using the page up and page down method, and have found none. I have also looked for audio being longer than the video, but haven't found that either. For the sake of thoroughness though, I have laid down an additional video track with a transparent video to be on the safe side.
I have optimized the rendering for memory, and have set the affinity for the premierepro.exe in the task manager to the first processor only. (I have 4)
I have cleared the memory cache and attempted multiple reboots.
I have closed audio waveforms, closed video picons, and closed the Program Monitor.
All to no avail.
Importing this PP file into a new PP file, loses all of the edits I've made.
When I render, I still get either one of, or some combination of the following errors.
"Debug Event"
[..\..\Src\PPixHandleUtilities.ccp-114]
This error pops up most frequently. During rendering, it will stop arbitrarily, never on the same frame so far, and then I have to hit continue multiple times, and the program allows me to continue to work on my edit.
Sometimes this will come in conjunction with the following errors.
No Output Generated!
Premiere Po is running very low on system memory. Please save your project and proceed with caution.
Application failed to return a video frame. Cancelling the Operation.
Sometimes these errors are accompanied by PP crashing, sometimes not. Sometimes, PP won't even begin rendering and will crash immediately upon pressing the render button.
What makes this all the more frustrating is that I've already rendered out a 7 minute version of this film, using the exact same After Effects rendered .mov files. In fact, I merely added onto what was already there for this longer version.
The only thing that I can think of left to check, that might be an issue (I am still learning), is that when I began rendering my quicktimes in After Effects CS3,
When I send the project to the render cue in After Effects, I render at best quality, full resolution 1920 x 1080, using the Photo-JPEG codec with no (best quality) compression.
In the Composition Settings, I have the Preset set at HDTV 1080 29.97, 1920 X 1080, 29.97 fps. However for 75% of my work as was rendering with the Resolution drop box at quarter 480 x 270.
At some point I noticed this, and thought, well gee, I want HD, so I rendered the remainder of my quicktimes with the Resolution dropbox set at full, 1920 x 1080. I thought this was odd, because all the quicktimes that I rendered out with the Resolution at quarter, seemed to come out into full 1920 x1080 HD, but figured I’d change it nonetheless to see if there was a change.
I have not rendered a new version out of Premiere Pro since I made that change in my After Effects rendered quicktimes.
I am in the process of checking to see if deleting those last quicktimes from the timeline will solve the problem, but thought I would get a jumpstart on asking about the issue because I have a sinking feeling that it won’t.
Anyway, thanks in advance for anyone who can address this issue.
What follows are my system specs.
Windows XP Home Edition Service Pack 3 (build 2600)
2.67 gigahertz Intel Core2 Quad Q9400
64 kilobyte primary memory cache
3072 kilobyte secondary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded
3326 Megabytes Usable Installed Memory
Slot 'J6H1' has 2048 MB
Slot 'J6H2' has 2048 MB
Thanks again!

Thanks for all the replies!
I’ve posted this inquiry on numerous boards and as such, have received a variety of different responses. I’m going to respond to all of them in a single response, so some of what you may read might be a response to a thread on another board. But I thought that providing this additional information might help my own efforts, or help any others who might have this same problem who might read this thread.
The source files are located on the same external drive.
After I finish this project, I intend to follow the advice and use external hard drives primarily for archive purposes while leaving my C drive as empty as can be.
My C drive is approximately 90% full. My concern in clearing off my C drive and transferring this project to there now, sit hat I’d have to redirect all the files to those locations. I’m not opposed to the additional work, but I’d rather try to see if I can find out exactly what this problem is, since this is kind of my virgin project with Premiere, and I want to know exactly what I did that is causing this so I can avoid doing it again.
There is no particular reason I need the .mov as a container, other than I’m just familiar with working with quicktimes in After Effects and 3DS Max. Although, the other night I attempted to reminder as mpegs and .avi’s, and circumnavigating the Media Encoder by exporting it as a movie and had pretty much the same issues in all cases.
There is no File> Export> Media> Export function in CS3, that I can find, however there is a File>Export> Movie option which I tried with the same results.
How do I make certain that the Media Encoder is up to date?
I’m not sure if I have the latest version of quicktime. This is something I can check on though. However, if I do not, and I update, will that mean that all of the elements I’ve aready rendered out from After Effects as .mov’s will have been made with the old quicktime? Will updating quicktime also update these rendered .mov’s?
In regards to 64 bit vs. 32 bit, I may be wrong, but wasn’t CS3 designed to work on 32 bit computers before 64 bit computers became available?
What are AC3 sound files? I’m not sure if I’m working with them or not?
I would have to say that it has to be a bad asset rather than a gap in the video, of only because I laid down a 4th video track, a transparent video track, over the entirety of the 24 minute video, which should cover any gaps.
I’m sorry, I honestly don’t know where my Page File (Windows Virtual Memory) is located, how it is managed, or even what it is. Though I do oftentimes get messages telling me that Windows Virtual Memory is low, but not while I’m working in Premiere.
I’ve done some additional troubleshooting and here’s what I found.
I’ve been attempting renders by deleting video and audio clips from entire tracks.
When I have the video from track 3 deleted, it stops rendering on frame 9720. When I have Audio track 1 turned off, it stops rendering on frame 9720 also, so that could be something.
When the clips from Video 2 track is deleted, it stops on frame 20533.
As an aside, attempting to render as a Real Video gave me a crash error at frame 20314.
When the clips on audio track 2 are deleted, I get the “No Output Generated” error message. Same with audio track 3.
Previously attempts to render would stop on frames, 8984, 9428, and 9567, which seem in the same general area.
When I use a frame/time calculator, at http://www.zapstudio.net/framecalc/
I get the following:
Frame 8984 = 00;04;59;23
Frame 9428 = 00;05;14;17
Frame 9567 = 00;05;19;07
Frame 9720 = 00;05;24;10
Frame 20314 = 00;11;17;24
Frame 20533 = 00;11;25;04
When I look at these timeframes on the timeline, I see nothing remarkable, and it isn’t hitting the .mov’s that I thought it might have, after I began setting the Resolution dropbox in the Composition Settings of After Effects as I detailed I did above.
So I’m atarting to think that my best option at this point is to start from scratch, add one clip, render, add one clip, render, etc., until I see a problem.
Thanks again for all the replies, and thanks again in advance for any future reponses!
Any additional advice or help anyone can give would be much appreciated!

Javascript generated validation error message not rendering properly.

Hi guys. I am a web developer looking for some help with a Safari issue.
I have a web form with client side validation. The page is built in asp.net and uses a validation summary to display the error messages in an unordered list. The validation is not the standard asp.net version, but a version they came up with at the company I work at.
The validation produces some javascript in the page, which appears just before the closing </form> tag, which I understand can cause issues in Safari? However I cannot change the place it appears on the page because its part of a sort of CMS template.
The validation text appears fine in other browsers, but in Safari it produces a white space. However if you highlight over the space, the text is revealed, and then stays on the page. Also if you scroll the page so that the space disappears off the top of the page, and then scroll back up again, the text is visible. Also if you click the submit button again the text is revealed.
I have also found that if you use Safari in the Transparent Window mode, it all works fine.
If anybody out there has any ideas what could be causeing the problem, I would be extremely grateful.
Mac Mini Mac OS X (10.4.9) Safari 2.0.4

Hi,
no, there doesn't exist a client side JavaScript API for this. The message element is only rendered if there is a component error detected in the lifecycle. This means there is nothing you can hook into (e.g. using document.getElementById())
Frank

Premiere Pro stops rendering and gives error message when encounters "RGB Color Corrector"

Premiere Pro (and also Encore) stops rendering and gives error message when it encounters a clip containing the "RGB Color Corrector" in any clip. It will process clips without RGBCC, but will stop when it gets to one with RGBCC activavted. PP will render clips if other effects, such as "Fast Color Corrector", "Color Balance (HLS)", and "Three-Way Color Corrector" are selected. However, these do not have the capabilities that The other color correctors will not do what RGB color corrector does, so I need to have this working to finish a large product that is due to the client. Please help me..... I am not using the Creative Cloud version, and can't find either a download for the new update from 2013, or a phone number to talk to anyone.

Using a Win7 computer with 2.8 quad core processor, 24 gig of ram, Nvidia Quadro 5000 video card. Don't think I have any plugins. I looked at one a while back for cleaning up grainy video, but I am not sure I paid for that. Think I deleted it.
Incidentally, someone named Jim on another part of the forum mentioned that this problem has been fixed in the CC version of the program. I am using the non-CC version because I am 68 years old and only do seminars and documentation video. Don't need so many bells and whistles, and definitely don't need learning curves every few weeks. CS6.0.3 works fine for me. By the way, someone else said that maybe version 6.0.1 might work better and I should revert to that. Not sure if it is the version i have on the disk upgrade to 5.5 that I purchased in December.
As it stands now, I have 7.5 hours of a seminar that is ready to go out the door. If there is an upgrade I can get from Adobe, maybe you can tell me about it. If I have a setting incorrect in the video output format, maybe I can change that. So far it just happens with clips in my video that have RGB color correction.
Rick

General Error message when rendering after opening FCP4 project in FCP5

Hi,
we're are having trouble with our FCP 4.5 project after opeining it in FCP5. When trying to render it comes up with "General Error" message and won't render the sequence. It also sometimes simply stops rendering without the message. Can anyone help? thanks

Update the version of FCP you're attempting to use as far as it will go for starters. There's no bug I know of that would cause this, so it's more likely an edgy media file getting in the way.
Try rendering just a section at a time and see if you can narrow down the files that may be causing your error.
Jerry

Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...

Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...   OSX10.9.2, iMovie 10.0.3, Toshiba externals 2TB etc

Hi Babowa and Apple:
Thanks for helping me.   Here is my workflow:
I store any file that I save onto my external drives so that I don't fill up my main hard drive.....( I label each external hard drive by year + alpha, such as 14a, 14b etc.) Is that a problem?   Any suggestions?
I know iMovie works from the main iMac HD and therefore needs to find the file that I want in the external drive, such as when I "import" a file from an external such as 14a into iMovie that has been previously downloaded onto the external 14a (I download all SD cards & tapes to externals)......and it sounds like you're saying that is causing iMovie problems because the file is not so easily accessible for iMovie?
I assume that iMovie processes the file that I have "imported" into an "iMovie Event" on my iMac HD. I label that version as say "NLGE 3000E" for my 3000th movie, Event version, "events" that is always rough.
After I have imported media as an event and have labeled an event, "NLGE 3000E," then I go to "new movie" that I assume is a "project".....and I label that version "NLGE 3000P1"...."P" for "project" and "1" for the first edition....also to help me keep track of where my movies go.   I focus on "Projects" then when editing ...and watch which edition I am editing and which edition appears where.
I learned that I need to "share" all movies from "Projects" to save......and store my final versions on my external drive, 14a (eg) so that I am sure that I have a retrievable copy.   I try to share to YouTube from iMovie and succeeded 1/10 tries.
Evidently a movie is not saved unless it is in "theater"?
Please see next "reply" for other comments about retrieval.
Thanks.

After many hours of "rendering", the message appears that"--could not be prepared for publishishing because an error occurred error code= -34" What does this mean?

After many hous of "rendering" the message appeared that "--could not be prepared for publishing because an error occurred error code= -34"

re-post in the iMovie forum where all the people that use that software are. This is the Lion 10.7 forum.

Imovie 10 wont let me share my videos over 3-4 minutes , youtube is ok but when i try a video of about 90 minutes i hit share and after about 10 mins i get the message box "video rendering error: -50 share failed please help!

I uploaded the new Imovie 10 and cannot share videos,after about 10 mins I get the message "Share failed Video rendering error :-50", please help!

I am getting the same problem. Downloaded Maverick and the new iMovie 10.0.1 and It will only upload 10 minutes of a 65 minute video then I get the rendering error 50 each time tried to export to desktop, to thumbdrive, to youtube. No luck. any suggestions Apple?

New project to DVD works fine, but sharing to a Blu ray fails, with a error message "video rendering error 60." What is that and how do I fix it?

getting an error message "video rendering error 60" when burning a new final cut pro project to Blu ray. Burning to regular DVD works fine. I have burned many other projects successfully to blu ray. What is this message and how do I fix it?

If this same timeline can be exported to other file formats and can be shared successfully to DVD, possibly it's the longer render time in the Blu Ray processing that is the problem. In the Finder in Applications, right click Final Cut Pro dot app, choose Get Info and verify that Prevent App Nap is checked. If it isn't, check it and try again.
Russ

Portal error message "Graphic rendering problem"

We just built a new portal system on Window server. A user login and get this error message "Graphic rendering problem". Would someone know what it is ? Thanks !

Check that the IGS is running properly...
Also check SAP Note: 704604
Regards
Juan

Rendering Error Message

Similar Messages

Maybe you are looking for