Rendering {iMovie to iDVD} and hard drives: use 1 or 2?
I have two LaCie FW drives.
To go from iMovie to iDVD, is it faster to have the Movie on one drive and the resulting DVD file on the other?
TIA
-wbajr
The iDVD encoding process is not really limited very much by hard drive read/writes - I doubt there will be a noticeable difference either way.
But iDVD will need lots of swap space on your startup drive, regardless of where the iMovie and iDVD project files are saved.
Similar Messages
-
Hi,
What is the benefit of using the VBR setting vs. the 128 kbps download rate for cds?
And does the VBR take up more space on my hard drive?
ThanksStrange that, I always thought that the bitrate set for VBR was the max bitrate, not the minimum. I know you're right, but it's just a little wierd. Logically I thought if you set the VBR bitrate to say 160kbps, that would be max it would go. So quieter less complex parts would return lower bitrates, (some I've seen got down to about 8kbps on some encodes I've done.)
On a CD ripper I use, I use the max VBR setting and it will always go below 320kbps, not many cd's I've done have ever encoded at max. I would imagine encoding at lower VBR bitrates using the same software will warrant the bitrate to be equal or lower than what it's set at.
VBR should yield slightly smaller files than CBR at the same bitrate.
Maybe I'm wrong, I'll check tomorrow. -
How to configure Time Capsule for Automatic Backup AND HARD DRIVE USE
I tried to configure Time Capsule for back up and as a hard drive. I record music and need to copy the music myself onto an external hard drive for speed, so I want the TC to double as an external hard drive, and do the back up. I want to be able to open the TC as a hard drive, to open my songs from it. Can it do both?
I finally figured it out. I am able to access my TC from the "shared folder." When I click on it, I get the "connection failed message." I failed to notice the login button in the upper right -- user error due to my Windows based education. The button is very subtle. Once I login, I can create folders and add content.
I didn't see a partition option. Where is that? Just curious.
Thanks! -
How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC.
No unfortunately it won't open in quicktime either. It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected. VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB. All of which cannot be opened or selected.
Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC. Is that the same? Thank you for your time and response.
CaCanuck -
Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.
My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there. -
I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.sydababy wrote:
and then deleting them off of my computer.
BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
The number of people who have experienced terror by having a single external HD backup is enormous. One failure that WILL HAPPEN, and kaput,......all gone!
Dont do it, its all about redundancy, redundancy, redundancy.
follow here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Deleting them off your computer is fine....having only ONE copy is extremely BAD.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret. -
How do i use airport as both time machine and hard drive? currently on Yosemite 10.10.1
how do i use my 3TB airport time capsule as both time machine and hard drive? currently on Yosemite 10.10.1.....Many Thanks.
Choose Computer from the Finder's Go menu and double-click it. If needed, use the Connect to Server command to log into it.
(119763) -
External hard drive used for Time Machine is full and having a hrad time backing up. What is my best option moving forward? NAS?
For All things Time Machine see Pondini's Excellent Infirmation here...
http://pondini.org/OSX/Home.html
Start with FAQs and Troubleshooting. -
I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download again
Thanks Dirk,
Tried your suggestion various ways but it had no effect the download button was still greyed out and the install button would not activate will keep trying to find a solution. I dont want to boot from the external hard drive that has Lion on mainly because it is a usb HD and the connection to my wireless modem slows the connection rate and downloading would take about ten hours -
I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.
Welcome to the Apple Community.
Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
Any responses you may receive may well be removed and would be wholly unreliable in any case.
If you believe that Apple's product may be enhanced in anyway you can leave feedback here. -
After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...
I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC: Enabled
DIMM Riser B/DIMM 1:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000463732353642363145353830304600
Serial Number: 0x00000000
DIMM Riser B/DIMM 2:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000463732353642363145353830304600
Serial Number: 0x00000000
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x42076007
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x4207631E
DIMM Riser B/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser B/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty -
Hi
I got an e-mail stating that Apple has determined that certain Seagate 1TB hard drives used in 21.5-inch and 27-inch iMac systems may fail, and that mine was one that may fail and to book an appointment with Genius to click here. So after making an appointment we then took out iMac to the shop affixing thirty minuets before appointment time and had to Waite until 12-45hrs. When we were told that we would have to leave the Mac with them for two to three days to replace the hard drive.
Can anyone advise, is this normal to make an appointment only to find that when you get to the Genius department in the Apple shop they then say because of the amount of iMacs that have come in today it will take days to replace?Hi mende1
Thanks for replying but when anyone makes an appointment surely the work should be carried out then not to be told to come back days later especially when you have traveled over one hundred and fifty miles to get to the shops. It may have been a free replacement but the cost of petrol for the journey comes to more than one hundred euros. -
IMovie Project from External Hard Drive not Opening?
Please help!!
Fairly new to MACs, iMovie and iDVD, I didn't have a clear understanding of how saving iMovie projects worked. Reading various tutorials, I thought I had a clear understanding of how they work. Apparently not with my recent frustration with iMovie.
I created several iMovie Projects but needed more space in order to make more projects for my internship thus I did what I thought was common sense -- get an external hard drive.
I exported iMovie projects into my user account and from there, dragged the saved projects into an external hard drive and then deleted the iMovie projects from my user account.
However, when I needed to retrieve these projects, I simply turned on my hard drive and clicked on them to open. However, whenever I tried opening them, they wouldn't open. Is it because I didn't export them to the hard drive in the first place?
What I don't understand is why iMovie is not opening or recognizing the saved iMovie projects from the external hard drive when the size and kind clearly indicate that it should open with iMovie automatically.
What is the proper way of saving my iMovie projects and events so that I can always have access to whenever I need to open up an old project or simply edit?Freeing up space on your Mac hard drive in iMovies ’08.
The application iMovie ‘08 has two main libraries displayed in the iMovie window: Events and Projects. Events are the main imports from your video camera, say. These files are big and you have the option to save them on an external hard drive and so iMovie knows to find them there. Projects are your editing instructions like what clips you want and where. The files are small and you save them on your Mac hard drive. They are NOT the clips only signposts where to find them (in Events on your external hard drive). You can move Projects to your external hard drive as back-up but iMovie will not find them there. If you then delete Projects from your Mac, iMovie can no longer make use of them unless you manually export them back into iMovie from your external hard drive. See Apple Article HT1026 iMovie '08: Moving iMovie footage to another drive (http://support.apple.com/kb/HT1026). Here the external hard disk is used for moving Projects from one computer to another and, by implication, back to the source computer.
Sharing the projects to iTunes for syncing with Apple TV creates (publishes) movies that take up the same amount of space on your Mac as the source Projects. You can still burn DVDs in iDVD using the iTunes Movies as your Media so provided you have iMovie Projects backed up on your external hard drive you can delete them from your Mac and just use the iTunes Movies (for Apple TV and iDVD). In addition, publishing iMovie Projects in iTunes for syncing to Apple TV results in these files being duplicated in both Movies/iMovies Sharing/iTunes AND in iTunes/iTunes Music/Movies so delete them from here and get even more GBs back! Tell iTunes in Advanced not to save these iTunes published movies anymore in order to stop further duplication ocurring. -
I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
Can't find imovie file on my hard drive
I have a imovie file on my hard drive that I can't find. I really want to delete it so
that I can free up some room on my hard rive. It's at least 15 gigs big. I tried using the search icon in the upper right hand corner and I tried using the 'find' option under the 'finder' menu, searching for any files over 5 gigs in size. Can anyone help me find this file so I can get rid of it?
[email protected]An iMovie project is a package, not a file; the actual files inside it are smaller. Use a tool such as WhatSize to locate it.
(23171)
Maybe you are looking for
-
I have found something on my imac leopard that no one seems to be able to explain. Occasionally, usually when I am surfing, if I move the cursor up to the corner of the screen, All of the recent history comes on to the screen. All the pages are sur
-
Hello all, An error is getting thrown in a function module in update task and it is displayed as an Express Document. I want to trace where this error is thrown. Is there any easy way to do that other than degugging from the start. Please give sugge
-
Free PSD Thumbnail reviewer for win 7 explorer
Hi, I have CS5 and use Win7- Ultimate-64bit. What is the free approache to preview PSD files' thumbnails in windows explorer? Thanks . . .
-
How to archive contact persons without relationship
Hello, if in ERP a contact person of an customer (VD02) is deleted a BDOC is created for CRM. This BDOC deletes the relationship from the contact person to the account in CRM. In the meantime we have a lot of contact persons without any relationship
-
Laptop DAMAGED by Toshiba Depot!!!
I am so upset! I sent my laptop for repair after fan and hard drive were about to fail to Toshiba Depot, they repaired that, so far so good. BUT when I opened the box with my laptop, returned to me after repair, I realized that the front (of the cha