Rendering in flv, size problem

hi everyone,
i am using the after effect cs5 version, and when chosing the flv rendering format, the rendered area of my composition changes.
hence, when imported in flash, the working area around the imported item is not the same than the composition size in after effect.
it it probably more clear with the screenshots i will attach to the document.
when exported in quicktime it works fine, but i must have a transparent background, so i have to export it in flv to make it work
if someone knows anything about this, any help would be welcome

That's never gonna work. FLV has certain format constraints and that's what the cute little triangle in the left bottom corner of the output module is trying to tell you. Click on it for magic...
Mylenium

Similar Messages

  • HP 8750 Paper-Size Problem where it keeps telling me the paper is too big (it's set up for 11x17)

    I've got an HP 8750 printer running with a Windows 7 Ultimate machine, and I've got a paper-size problem where it keeps telling me the paper is too big. It's set up for 11 x 17. 
    The actual wording on the printer is: 
    Paper installed is larger than needed. Press cancel to replace with correct size, if you wish to save paper, or press check mark to continue. 
    When you press the check mark it feeds the paper, but for a multi page-document I have to press the check mark for each page to feed.
    How do I get it to print 11 x 17 paper without having to press the check mark for each page?

    ''guigs2 [[#answer-672422|said]]''
    <blockquote>
    NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
    # 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
    # 2) Click "Content"
    # 3) Next to "Languages", click "Choose"
    # 4) Select "English/United States [en-us]", click "Add"
    # 5) re-open "about:accounts"
    # 6) Click "Get Started"
    </blockquote>
    Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work....

  • Is there a solution to Rapidweaver Stacks Cache size problems?

    Is there a solution to Rapidweaver Stacks Cache size problems?
    My website http://www.optiekvanderlinden.be , has about 100 pages and is about 250MB in size. Every time I open RapidWeaver with the Stacks-plugin, the user/library/cache/com.yourhead.YHStacksKit folder grows to several Gigabytes in size. If I don't  manually empty the com.yourhead.YHStacksKit Cache daily, AND empty the Trash before i turn off my mac, my Mac still has problems and stalls at startup the next day. Sometimes up to 5 minutes and more before he really boots. If i have a been working on such a large site for a few weeks without deleting that cache, than my iMac doesn't start up anymore, and the only thing left to do is completely reinstall the iOs operating system. This problem doesn't happen the days i use all my other programs but don't use Rapidweaver.
    Does anyone know a solution and / or what is the cause of this?

    once more,
    i just launched my project in Rapidweaver, and WITHOUT making any changes to my pages, the cache/com.yourhead.YHStacksKit folder filled itself with 132 folders (total 84Mb), most of them containing images of specific pages etc. The largest folder in the cache is the one with the images of a page containing a catalogue of my company, this folder is 7Mb. It seems by just starting up a project, immediately different folders are created containing most of the images in my project, and some folders with a log.txt file. Still i don't see the reason why it is filling op a huge Cache even without making changes to the project. I have 2 different sites, so 2 different projects, and i get this with both of them.

  • My mobile form of my homepage have some size problems!

    Hello! My mobile form of my homepage have some size problems. All pages gets right size exept one. It only cover halv of the page. What is wrong?

    Hello,
    Can you please share the URl of the page with us so that we can get a better idea of the issue.
    Usually this happens when any object is placed outside the browser are in Phone layout.
    Regards
    Vivek

  • Size problem with Email sent from SAP

    Hi everyone,
    All our layouts today were developed with sap script
    We started to send them by mail, using the standard way.
    in the process they are converted to PDF format from OTF, because of this activity the size of the mail that I am getting is 1 Mega where as the source is only 300K (approximately).
    We are already flagged the option of compressing.
    As we see now we don't have any option to make the email to be smaller.
    Is someone already encountered this problem? What option do I have? (Except of developing the layout again in Adobe)
    Thanks allot
    Udi
    SD consultant

    First thanks
    Sayali Paradkar , we used in the past this function module, but it was even worse.
    We started to use the standard process of sending mail.
    As we understand the program of converting OTF format to PDF cause the size problem.
    And its define to send PDF out of the SAP, also we are using SAP definitions to compress all files :nSE38 -> RSTXPDF3 -> option FLATE_COMPR_OFF = OFF
    But still the mails are very big,
    Thanks again
    Udi Marom

  • Rendering Size Problem

    In my first Premiere project I am having a rendering problem.  It's a simple 8 minute project with one video track and one audio track.  The video track is 10 fps in .mov format and is 20.5 MB.  The mono audio track is a simple voice over that is 8.3 MB.  The sequence is set at the same size and fps as the video clip.  When I render it, the resultant size is over 500 MB.
    I've tried every way I can think of to render it differently, but can't seem to get the size down.  It makes no sense to me that the final size would be so large.  I've watched tutorials and done web searches and I can't find anything that helps me on my question.  I'd appreciate any advice about how to render properly.
    thanks

    Depending on what use, you want the exported file for ...you choose a preset that suits.
    eg .wmv, H264, QT, FLV etc...
    Most will be compressed and that will make your file size smaller.
    Tip: work backward from the delivery spec.  If its a youtube  delivery - use a Youtube H264 preset

  • FCP - Massive file size problem.

    So I've been exporting out a 21min sequence out of fcp 7.  In past edits and on the same project file, the export has been fine, rendering out at a healthy 6gb.   But recently the final file size has become 29gb.  This is obviously not right.  My question is, what is going on and how can I fix it? 
    The only thing that has changed is I've done a color grade (from Color).  So some of the files are different,  but the new color graded clips aren't any bigger than the origianl ones, so I don't think thats the problem.
    Another random thing that happend is:  When exporting I give the file a name, e.g. Helloworld   And I select show file extension.  The weird thing is when it's completed its export, the file name then becomes Hellowordmov.mov   I have not idea where that extra mov is coming from, (and it doesnt appear when I select show file extension).  What is going on here?
    Below are my sequence settings.  I chose File -  Export -  Quicktime Movie...  And keep it on Current Settings.
    Any help is much appreciated.

    The Digital Rebellion Video Space Calculator shows 28.23 GB.
    http://www.digitalrebellion.com/webapps/video_calc.html?format=prores_422_hq_108 0&frame_rate=f25&length=21&length_type=minutes

  • FLV size

    I uploaded an FLV file. When I click on the 'Play Video' link
    in the presentation, the FLV opens in a tiny window and the viewer
    must resize the window. I think the video looks best at 100%
    (480x360 for my video). I'd like for the window to automatically
    open with the video sized at 100%. Does anyone know a way to does
    this without using a SWF?
    Thanks

    There is no good workaround for video in Presenter at this
    time. FLVs in the presenter panel are too small and don't offer the
    control you need while SWFs in the body of a slide have horrendous
    issues with long waits for buffering and are unusable for clips
    over 2-3 minutes.
    You also cannot make the video large enough in most cases
    without compounding the problems and the Sorenson codec looks
    terrible at large screen sizes.
    Clients just hated the product for streaming video so our
    solution was to build our own custom add-in that automatically
    launches a new, frameless window of any desired size (even
    fullscreen if required) that plays the video using the On2 VP6
    codec. This gives you the ability to play content of unlimited
    length - full length movies are no problem - and the window
    automatically closes as soon as it's finished playing. No user
    intervention is required.
    You can even show a movie with sub-title overlays so a single
    source file can be used for a multilinual audience. Uploading your
    presentation to the server is a snap because you're not embedding
    the movie in the slideshow each time. It's really very elegant and
    works like a charm. You can see a sample at
    http://Train.RefinedData.com/RefinedVideo
    and I'd be happy to supply anyone with a free trial sample to play
    with.
    The solution works just as well in meetings and meeting
    recordings.
    All the best,
    Terry (Skype "terryshane")

  • FLV import Problem / .264 files slow

    Hey,
    for my work I have to use hours of .flv files daily. These are VODs from Twitch which I have to edit. Being stream related content these files often get "corrupted" because of internet connection/Twitch problems. In the .flv files this is not really a problem - most of the time you see a brief stutter but everything else is fine. Now I obviously can not import .flv files into Premiere Pro CC so I used FLV Extract to export a .aac and .264 file from the FLV container. These files import just fine into Premiere Pro but the main problem here is that when working with a .264 file the previews render VERY slow and often red frames appear. Also when exporting a file it takes MUCH time and barely uses my CPU at all (tested with other files and formats and they worked just fine).
    It is also interesting to note that the .aac and .264 files have different lengths and thus get out of sync. How much depends on the source .flv file (most likely how much it got corrupted due to various reasons?)
    My PC specs are 32 GB RAM, GeForce GTX760 Video Card, I7-4790 CPU & 3 7200 RPM HDDs
    Media Info
    Original .flv file
    General
    Complete name                            : E:\Projects\0.flv
    Format                                   : Flash Video
    File size                                : 237 MiB
    Duration                                 : 30mn 1s
    Overall bit rate                         : 1 101 Kbps
    Tagged date                              : UTC 2014-06-10 20:38:05
    Tagging application                      : flvmeta 1.1-r213
    Video
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 4 frames
    Codec ID                                 : 7
    Duration                                 : 30mn 1s
    Bit rate                                 : 941 Kbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Constant
    Frame rate                               : 29.970 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.015
    Stream size                              : 208 MiB (88%)
    Audio
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format profile                           : LC
    Codec ID                                 : 10
    Duration                                 : 30mn 1s
    Bit rate                                 : 125 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 44.1 KHz
    Compression mode                         : Lossy
    Delay relative to video                  : 24ms
    Stream size                              : 28.4 MiB (12%)
    .264 file
    General
    Complete name                            : E:\Projects\0.264
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    File size                                : 207 MiB
    Video
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 4 frames
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Variable
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Now my first question would be: why has Premiere Pro such difficulties when working with these .264 files? Do I lack any codecs? Are some settings in Premiere Pro wrong? Is there any workaround or solution? As long as Premiere Pro works fine with these files I wouldn't mind them being out of sync since I can fix that manually.
    I also tried using FFMPEG to change the container from .flv to .mp4 which worked and resulted in me being able to import the files into Premiere Pro but even though the video and audio track had the same length this time - they were still out of sync and much more difficult to re-sync them if at all possible so this didn't help much. I also tried video converter programs to convert to other file formats but the out of sync problem still carried over.
    So as an alternative question: is there any way to convert the original .flv files properly so I am able to import and work with them? Meaning they are still in sync and keep the original quality.
    The solutions should be as efficient as possible (quick) since I have to go through hours of content every day.
    I am very grateful to anyone trying to help. It is VERY much appreciated. Thanks.
    (for a test file you can download a flv file using www.twitchtools.com with the video link http://www.twitch.tv/trumpsc/b/537543702 - a corrupted part that ALWAYS speeds up is in the first few minutes (if you download part 7) when he opens the arena rewards when the key comes down)

    I very much appreciate the help. Sorry for any lack of clarity or apparent density on my part. Up late last night.
    I have a single internal drive formatted "Mac OS Extended (journaled)". It is a 160GB drive with 20GB free.
    I have two maxtor FW 400 160GB drives. Each with about 80GB free. One plugged into the back of the computer, one into the front. Not daisy chained.
    I have a P2 Store which connects via USB 2, and the HVX which I connect to the FW 800 port on the back of the computer.
    Like I said, I've tried every conceivable combination of these devices. I've imported directly from the camera via FW to the internal drive using FCP. I've gone from the camera directly to both of the FW drives using FCP. I've also transferred from the camera, to the internal drive, then imported using FCP from the internal to the FW drive set as my scratch disc. And so forth.
    But no matter what the permutation, I get the same result. And again, it doesn't seem to be an issue of moving these blocks of data around. That seems to happen just fine as far as I can tell. If I start the import, then watch the clips being created in the capture folder, they agregate just fine. It's only once they've reached their full data size (in ref'c to the original mxf files) that the import process hangs. The larger the clips, the longer the hangs (though fewer in number, obviously).
    I deleted the FCP preferences and repaired permissions on my internal HDD with no alteration of the problem.
    The only other observation I've had, is that when the hangups happen, and the little ball starts spinning, I also hear a high pitched whining from inside the computer case. It does not sound like usual HDD work.
    Hope that I've given a better sense of the situation. Thanks for bearing with me
    GPL
    PowerMac G5 Dual 2Ghz Mac OS X (10.3.9) 2.5 GB RAM

  • PP CS4 renders to different size

    I joined this forum because I was having a problem rendering videos in Premiere Pro CS4 that I couldn't figure out. In my search of these discussions I found some other users who were having the same problem but I didn't see any solutions. So while I was preparing to post my specs here, I think I found the source of my problem and the solution and wanted to share this with you.
    The problem was that even though the video played correctly it would suddenly change the size and ratio leaving some large black empty space after doing a render.
    When setting up my new project I chose "Desktop" under the preset sequence settings. I needed to do this because none of the presets matched the size of my source video. Under the "General" tab and "Video Previews" the Preview File Format will automatically default to Microsoft AVI when in the Desktop editing mode. This you can not change. However, the "Codec" will also default to DV (24p advanced) and you will need to change this. I chose Microsoft RLE and it worked fine. 

    JSS1138 thanks for your reply. You actually bring up something that I wondered about. Just so I understand completely, you are saying I won't have to worry about rendering? After working on my video project I can just send it to Adobe Media Encoder and that's it?  Also, you mention that it will only be required if the project is complex. How will I know this? Thanks in advance for your reply.

  • Printing and scanning size problems (half size)

    Hello,
    I am having an issue with my Pixma MP170.  When printing multiple pages or scanning a paper document, the size come out really small all of a sudden and two pages will be together in one print or scan.   I looked for updated drivers but that doesn't look to be the issue and the problem pesists.
    I tried to reset the printer to default but nothing. 
    Not sure how to proceed.
    Thanks for any suggestion.

    I have had something very like your problem.
    Mine is printing quarter size in landscape and is also not scanning or doing copies at the moment..
    I can find no way of setting it and it ignores all settings sent from the computer.
    It printed one test page correctly and once I tried printing a small text file it came out small and in landscape and now even the test page is also small and also in landscape.
    I am tempted to look inside for an engineering jumper or backup battery.
    Mine is an MP270.

  • Edit box length size problem...at Detail Section.

    hi.
    Plz have a look on below image.
    This is my problem.
    in details section i put one edit box... like below..
    the data is comming from data base..
    Header 1
    but the size of the filed is more than the size of the Edit box..
    i all ready checked  can grow option in format field common properties.
    but horizontal line is not adjusting ....
    what should i do...

    Hi Srini,
    You can't place another object directly below an object that 'grows'.
    Create another section and move the line to this new section.
    -Abhilash

  • Swing layout/size problem with JFrame and JApplet.

    I have a class that extends a JFrame, the classes layout is BorderLayout. I then have a class that extend JApplet, this classes layout is GridBagLayout (this class has a JTabbedPane - which contains JPanels). The problem I'm having is no matter how big I make the size of the applet or frame (using setSize), the applet/frame stays the same size - no matter how large I make it.
    Can anyone please help?
    Thanks,
    dosteov

    Here is the basic code:
    Thanks in advance,
    dosteov
    public class EADAdm extends JApplet
    EADAdmFrame theFrame = new EADAdmFrame(this);
         public void init()
              // Take out this line if you don't use symantec.itools.net.RelativeURL or symantec.itools.awt.util.StatusScroller
    //          symantec.itools.lang.Context.setApplet(this);
              // This line prevents the "Swing: checked access to system event queue" message seen in some browsers.
              getRootPane().putClientProperty("defeatSystemEventQueueCheck", Boolean.TRUE);
              // This code is automatically generated by Visual Cafe when you add
              // components to the visual environment. It instantiates and initializes
              // the components. To modify the code, only use code syntax that matches
              // what Visual Cafe can generate, or Visual Cafe may be unable to back
              // parse your Java file into its visual environment.
              //{{INIT_CONTROLS
              getContentPane().setLayout(new GridBagLayout());
              setEnabled(false);
              getContentPane().setBackground(java.awt.Color.lightGray);
              setSize(800,800);
              getContentPane().add(AdmTab, new com.symantec.itools.awt.GridBagConstraintsD(0,1,2,1,0.5,0.5,java.awt.GridBagConstraints.CENTER,java.awt.GridBagConstraints.HORIZONTAL,new Insets(3,12,4,14),120,120));
              AdmTab.setFont(new Font("Dialog", Font.PLAIN, 12));
              titleLbl.setHorizontalTextPosition(javax.swing.SwingConstants.CENTER);
              titleLbl.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
              titleLbl.setText("EAD Administration");
              getContentPane().add(titleLbl, new com.symantec.itools.awt.GridBagConstraintsD(0,0,1,1,0.0,0.0,java.awt.GridBagConstraints.CENTER,java.awt.GridBagConstraints.NONE,new Insets(12,36,0,0),307,15));
              titleLbl.setForeground(java.awt.Color.blue);
              titleLbl.setFont(new Font("Dialog", Font.BOLD, 15));
              exitBtn.setText("Exit EAD Administration");
              exitBtn.setActionCommand("Exit EAD Administration");
              getContentPane().add(exitBtn, new com.symantec.itools.awt.GridBagConstraintsD(0,2,2,1,0.0,0.0,java.awt.GridBagConstraints.CENTER,java.awt.GridBagConstraints.NONE,new Insets(6,371,10,14),66,8));
              exitBtn.setFont(new Font("Dialog", Font.PLAIN, 12));
         //theFrame.setVisible(false);
         login();
         AdmTab.addTab("Administration", new LogoPanel() );
         userPanel = createUserPanel();
         AdmTab.addTab("Edit Users", userPanel );
         fpoPanel = createFPOPanel();
         AdmTab.addTab("Edit FPO", fpoPanel );
         regulationPanel = createRegulationPanel();
         AdmTab.addTab("Edit Regulations", regulationPanel );
         rolloverPanel = createRolloverPanel();
         AdmTab.addTab("Rollover", rolloverPanel );           
              //{{REGISTER_LISTENERS
         SymMouse aSymMouse = new SymMouse();
              this.addMouseListener(aSymMouse);
              SymAction lSymAction = new SymAction();
              exitBtn.addActionListener(lSymAction);
              SymKey aSymKey = new SymKey();
              this.addKeyListener(aSymKey);
         theFrame.getContentPane().add(this);
    public class EADAdmFrame extends JFrame
    EADAdm theApplet;
    public EADAdmFrame(EADAdm theMainApplet)
              //{{INIT_CONTROLS
         //     theApplet = theMainApplet;
         //     this.getContentPane().add(theApplet);
              getContentPane().setLayout(new BorderLayout(0,0));
              getContentPane().setBackground(java.awt.Color.lightGray);
              setSize(1000,1000);
              setVisible(false);
         theApplet = theMainApplet;
              //{{REGISTER_LISTENERS
              SymWindow aSymWindow = new SymWindow();
              this.addWindowListener(aSymWindow);
              SymComponent aSymComponent = new SymComponent();
              this.addComponentListener(aSymComponent);

  • PDF File Size Problem

    Hi,
    I am using Adobe Acrobat Elements 7.0 in my computer to convert files like .txt and .doc to .pdf files. But currently I'm facing a problem with the converted .pdf file size. For example, my .doc file is 5MB and after I convert to a .pdf file, it becomes 10MB. The file size basically multiplies itself by 2.
    I've tried converting .txt and .doc files and it gives me the same problem. I've tried reinstalling, tried all kinds of settings, and recreating user profile but it doesn't help. Can anyone help me? Thank you very much.

    Sorry. The problem is caused when I want to password protect a .pdf using elements. So I used Adobe Reader to open the .pdf file then I'll print using Adobe Printer so that I can password protect it and output file size is actually 10 times the normal .pdf file.
    Please help!!

  • Print Paper Size Problem after Mavericks Upgrade

    I migrated my Apps, Data and System Settings from a Macbook running OSX Lion to a new Macbook Pro running Mavericks.
    The problem I now have is that the application 'Family Tree Maker 2' cannot get the paper size right. No matter which Paper size I select, it is shown as half size in the Application Print Preview screen and this error carries through to actual printing.
    so A4 210 by 297 mm displays as 5.8 x 4.1 inches (which is Half Size).
    The problem is significant because the application formats it's output to fit into half of the available space.
    I have unsuccessfully tried;
    - removing and reinstalling the Application.
    - Adding my Brother Laser printer with the latest Mavericks compatible driver.
    - Resetting the printing system.
    - Repairing disk permissions
    - Adding a new User Account
    - Deleting plists associated with com.ancestry
    iWork Pages is working correctly.
    I have raised this with ancestry.com however it appears that I am the only person that has experienced this problem.
    Any suggestions would be appreciated.

    Problem is worse than that. Whilst the Paper is shown as half size, the family tree diagram boxes are produced twice as wide as they should be.
    If I select A4 Paper, a diagram that would fit on one page is now spread across two.
    If I select A3 Paper, the preview indicates the paper size as A4 8.3 x 5.8 inches however the diagram size and position on the paper are unchanged and I just get loads of white space around the outside of the diagram.
    It does sound like an Application problem but it is still working fine on my old OSX Lion machine. Something has happened in the migration.

Maybe you are looking for