Rendering Issue - Only half frame is visible

*Hey everyone... I'm sure there is a simple solution, but I cannot figure it out.*
*I render out various projects as an H264 format. I've never run into any issues until recently. Two projects to be exact do not respond well to many rendering attempts.*
*I have all the settings set correctly yet only the top portion of the entire render is visible, the bottom half is solid black... If you scrub through the project the entire thing plays, but the bottom remains black.*
*Any thought?*

I came into this same problem myself, the day after I downloaded and installed the new quicktime 7.6 update. That is the only thing I can think of that changed between the time I rendered one video that worked, and the same video again that had the solid black line from the midpoint down on the video. The only workaround I could find was to export the video in Apple's Pro Res 22 format, and then open the file in Quicktime player and export it as an H.264 file. That seemed to work fine.
The black bottom portion bug only seems to affect Motion, as far I know.

Similar Messages

  • Satellite A105-4094 display issue - only half screen

    So my screen is half displaying, its a compressed version of the full screen.
    The right half of the screen is lit, but all black, and right after the halfway point on the left side there is a strip of image then a strip of black before seeing the compressed image.
    The output works fine to an external. I know its not the video card. I reinstalled the updated Bios, and i tried using powerstrip.
    I'm pretty sure its a software issue as in system devices my display is shown as Digital flat panel with a max res of 1024 x 768 but the native is 1200 x 800 and it used to be called something else like toshiba laptop internal monitor.
    No drivers have fixed the issue and i can't find a similar problem anywhere!
    Anyone have any ideas what this could be?
    It used to do this, and a restart would sometimes fix it, but now its just stuck like this.
    If you need pics i can take screen shots later, but i dont have it available right now...

    I had a similar problem with my previous laptop.
    Does it happen in the BIOS and at the Toshiba logo as well? If it does, that would rule out a software/driver problem since Windows wouldn't be running at the time.
    If it happens in the BIOS as well:
    -Try resetting the BIOS to its defaults
    If it happens only in Windows:
    -Update the display drivers.
    -Disable extended/clone desktop in the Display Settings in Windows.

  • Rendering only 1 frame

    This is a follow-up to posting http://discussions.apple.com/thread.jspa?threadID=1764783&stqc=true, which was never resolved. After following all efficiency recommendations, reinstalling Motion I finally upgraded both the OS (to 10.5.5) and the video care (to ATI X800 XT). The card helps a bit but the program/system is still having difficulty as a project complexity builds.
    I've taken to cutting effects down into subsets, rendering out elements and then building on additional elements, something that can be limited depending on the effect.
    Currently I have an effect of relatively few elements and the program will only render out 1 frame (actually yielding only a solid black frame) of a 02;12 segment.
    What else is there to do?
    Can't cut the elements down further. Using motion tracking from one, with Match Move in the other and a few filters between the two.
    Any help is appreciated.
    Apple really needs to upgrade this product. From the beginning it's been a program that is too functionally strong to run on its available hardware. Do we truly need to buy only top-of-the-line $15,000 Mac systems to run this program? If Apple wants to continue challenging Avid and Adobe they need to take this seriously; we indie producers/artists are their primary customers!

    I followed the advise in an article and I moved the flv and swf file into the root directory of my site (they were inside a folder before)
    I updated all the links and it now plays the video! but...
    Before I exported the video from After Effects through XFL to Flash, inside Flash exported in to a SWF, inside dreamweaver inserted the SWF on the page. The file was large (5MB) but played fine in a web browser.
    I got a few complaints from people with slower connections, so I wanted to add a pause/play button.
    So this time I exported from After Effects only half of the slideshow as an FLV. Then in flash I made the button. Now inside a web browser the file plays very slowly and constantly stops (which changes the button to 'play'). The browser is constantly loading the FLV file, which is now 7MB!
    It is only a slideshow of 6 pictures. I made them all 900px x 600px (my page size is 980) before adding them to AE.
    I would love to have this button functionality, but it still is just a banner/slideshow on my webpage, I dont need a full FLV player skin.
    Any reccomendations for me on how to display this file and also have pause functionality?
    the site is: www.daniellesmit.com/home
    Thank you
    Danielle
    Moderator:
    Shall I start a new post, it is kind of not relevant to the title anymore?

  • Low Framerate and only 156 frames were rendered!?

    When I try to play my 3d camera swivel, the framerate is very low...and when I select the area I would render and render it with "alt-shift-cmd-r", only 156 frames were rendered!!
    Is there a way to render the sequence fully??
    Help me please!!
    Thanks!
    I hope you understand my bad english....

    First, you can just use command-r (it's easier on the fingers ).  I think if you just lower your resolution (From full to half, that will help).  I tried it with a clip and my ram preview when from 175 frame to 600.  The number of frames you get does depend on 1)How much RAM you have, 2) the size you are working at (SD,720, 1080, etc).  Larger frames take up more RAM.

  • Captivate 6 rendering issues when publishing flash only

    Hello,
    I wanted to ask if anybody else is experiencing the same issue as I am experiencing when I publish my captivate 6 projects:
    Issue:
    Project consists of 46 slides.  No advanced actions.  Multiple rollover images and text captions are on several slides. software capture
    When publishing to a USB or my desktop then previewing I get rendering issues and these vary from parts of the software that I am capturing not appearing at all to my master slide templates disappearing.  Whenever this happens I try publishing to flash 10 and ctick the force republish of all slides - sometimes this fixes the problem sometimes it does not.  So I try publishing to flash 9 force republish of all slides sometimes this fixes the problem sometimes it does not.  It is just so hit and miss I have to publish 4 to 5 times before I finally am successful.  So of course this is extremely frustrating when I have to make changes to the project and republish.
    Also notice that viewing in web browser has the same issue.
    Think I am going to have to go back to captivate 5.5, which is such a shame as I really love some of the new features in 6.
    Does anybody have any ideas as to why this may be happening?
    I have attached two screen dumps - one where the screen is rendered poorly and the other where I have crossed all of my fingers and toes and republished and the screen has been rendered correctly:
    Thanks
    Ali

    Hello Sankaram,
    I am experiencing the same problem as Ali, where my master slide randomly disappears in my published project. I tried the options you listed above. I also deselected "Use Master Slide Background" and "Project Background" on each slide.
    Also, I have a button on each slide (next button to move through the slides) and sometimes disappears as well. However, I can still click in that region where it should be visible, and it will progress to the next slide.
    Any suggestions?
    Thanks,
    Jackie

  • HT1725 I downloaded an album from itunes and only half of the songs have downloaded. The rest of the songs keep trying to download and then come up with an error saying they cannot download at this time. I'm not sure what the issue is.

    I downloaded an album from itunes and only half of the songs have downloaded. The rest keep trying to download, but I keep getting a message that says, "Song cannot be downloaded at this time. Do you want to retry or be done." Each time I retry, the same thing happens. They will not download. I have restarted my phone and the same problem remains.

    Other people have been having similar problems with songs over a number of days.
    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting it from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link.

  • Rendering issue on Samsung S4 (specific models) with AIR app

    We have an Android/IOS app compiled with AIR 3.9. It works fine for all devices but some specific models of Samsung S4. First let me describe the device models & compilation details, as below:
    > Issue found on devices (given models only, on other S4(s) works fine):
         - Samsung Galaxy S4 (Model No. SGH-M919)
         - Samsung Galaxy S4 (Model No. SCH-I545)
    > Compilation:
         - AIR 3.9 (also with 3.8)
         - Render Mode GPU
         - Bitmap graphcis
    > Problem:
    There problem is with redering of grpahics speically which are masked. Either those masked graphcis doesn't display at all OR display in wrong layer (also distracted) when Display List realted to that object is manipaulated i.e. A child object is added to the parent of masked object & the masked object appears above it which was previously not visible. Some masked obejcts are not displayed at all.
    > Observation:
    It was same with CPU mode rendering however when the render mode is changed to AUTO the issue is resovled. But then app is preforming too slow as it uses all bitmap graphcis.
    It seems the specfic S4 models are using different type of GPU, though it should not create such weird issue. Can anybody suggest possible solution for this? OR have faced sismilar behavior on said devices ?

    Hi  Omi,
    Thanks for your reply for issue “Rendering issue on Samsung S4 (specific models) with AIR app”. My adobe account is [email protected]<mailto:[email protected]>, you can send your simple app to me by this account, now we are working on it.
    Thanks
    -Bo
    发件人: grosssmutttr [email protected]
    发送时间: 2013年12月28日 18:52
    收件人: Bo Tang
    主题: Rendering issue on Samsung S4 (specific models) with AIR app
    Re: Rendering issue on Samsung S4 (specific models) with AIR app
    created by grosssmutttr<http://forums.adobe.com/people/grosssmutttr> in AIR Development - View the full discussion<http://forums.adobe.com/message/5961441#5961441

  • Issue with af:tree's visible=false on IE

    Hello,
    I have an ADF page containing two af:tree components. For both rendered is set to true and visibility is set to false. For both the trees height has been set to 500px. Based on selection criteria either of the two trees has to be made visible. No issues on Firefox. However on IE, both the trees are occupying space even though visibility is set to false. When I try to show the second tree, it shows up down below after 500px of white space. So, even though first tree is not displayed, it still occupies the space. Please let me know the solution.
    Thanks,
    Lalitha.

    Hi,
    sounds like a bug to me. You can try an af:switcher component, though it only shows one tree at a time then
    Frank

  • Half-frame slide in slide shows - burning DVD

    I created a slide show in Photoshop Elements 10.  I then clicked on Output to begin the process of creating a DVD.  When the slide show transferred to Premiere Elements 10, only the bottom half of each slide frame appeared and thus produced a slide show DVD with only the bottom half of the frame.  I then tried to burn a new DVD from a slide show I had successfully burned on a previous occassion.  Again clicking on Output and following the menu I again got the half-frame when I got to the DVD burning program in Premiere Elements 10.  Can anyone give some assistance?

    Here is that ANNOUNCEMENT:
    ANNOUNCEMENT: Windows Update Causes Display to Be Blacked Out
    MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
    "MS bulliten MS13-057.  Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
    For us, it occurs when decoding WMV9 files.  Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
    You can uninstall these windows updates to resolve your problem."
    There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
    Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
    Adobe has reported that MS is getting close to a new Update, but no time of release yet.
    Good luck,
    Hunt

  • Rendering Issues Windows XP

    Hi,
    I am completely stumped with a repaint issue in my app.
    The application is a fullscreen app. There are JDialogs which appear on top of the main fullscreen JFrame from time to time. All windows are undecorated!
    The problem is that sometimes the dialogs do not show and sometimes it looks like they do not disappear after being closed. However, if i rub my finger over the screen (touchscreen) then bits of the dialog will either appear/disappear as appropriate. That means it is a rendering /repaint issue ..
    The times when this problem occurs are extremely random. Some installs may not notice for upto one year then it could happen a few times in a week..
    All of my GUI code is called from within the EDT thread and i use the swinghelper class CheckThreadViolationRepaintManager to ensure that this is always the case. This should mean i have no repaint problems such as are happening. The EDT is not stuck either when these repaint issues occur as i monitor that to ensure this.
    I also set the flag -Dsun.java2d.noddraw=true which i have read can fix some rendering issues on win32 installs. However this does not appear to fix it in all situations.
    My biggest problem is how to debug this? Are there any other reasons why this might happen?
    Thanks in advance..
    BTW: the majority of the jvm's this happen on are 1.6_16 but i also have one running 1.6_22 (latest i think!)

    I already wrapped any calls to JDialogs.setVisible(true) with SwingUtilities.invokeLater
    I did this even though they are all created and shown on the EDT as they are called from an ActionEvent handler (can the actionevent generated by clicking a button be called from something other than the EDT? As far as i am aware it cannot).
    i have frequent checks in code to check if we are running on the EDT and log a warning if we're not. When this issue occurs there is no warning in the logs about not being on the EDT anywhere!. I use SwingWorker where necessary to take any extra load off the EDT.
    JDialog.toFront() should not do anything since it is modal (APPLICATION_MODAL) so it should be on top anyway.
    This would only be something todo with showing the dialog. Not closing and then repainting the main frame behind it. All calls to JDialog.dispose() are wrapped by java.awt.Window.doDispose() to be on the EDT even if they are not called from the EDT.
    These are all standard Swing/AWT repaint issues that i am aware of. Is there any other non standard ways this issue can arise?

  • I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

    I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

    Hello,
    I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
    Please share a screenshot if the issue still persists.
    Regards,
    Nakul

  • I have made a book of my I Photo pictures. In certain layouts there is a textframe. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it or should I delete the text "Write your text here" ?

    I have made a book of my iPhoto pictures. In certain layouts there is a text frame. How can I avoid the frame becoming visible in the print if I don't want to write anything?  Should I just leave it untouched or should I delete the instructing text "Write your text here"?

    Most pages have layouts for pictures only or pictures with text boxes. Either select the same layout for that page but the one without the text box or put a space in the text box.
    Putting a space in the text box will avoid getting the warning when ordering that there's an unfilled text box in the book. The box will not be visible in the final product.  You can and should check the book before ordering by previewing it as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it
    Happy Holidays

  • Source monitor and program monitor boxes will not display video in full only half

    I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half.  So the top half of both monitors are black and the bottom half is where the video displays.  But you can see that the video is missing the top part.  Like people's heads are cut off and can only see body.  How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

    This is a known issue with a recent Windows update.
    The Fix (post 3):
    http://forums.adobe.com/message/5494175#5494175
    The Status Update (posts 46 / 52):
    http://forums.adobe.com/message/5555797#5555797

  • ITunes 7 Rendering Issues

    Ahoy hoy,
    I became entangled in this problem upon first running iTunes;
    Running it for the first few minutes, all is fine, tick-tock, no problems so far.
    Then...
    If one is inclined to switch applications, to say Firefox etc., hide iTunes, and then switch back to iTunes upon revealing it from that wonderful hiding place that is apple+h, it comes out all DICOMBOGULATED... of which a preview can be seen:
    http://www.flickr.com/photos/duffin-tim/243757719/
    It renders the interface all like, nineteen-eightees-Commador64-loading-a-game-up-like (I can post more previews of the glitch, some of them look pretty cool); what is the meaning of this?, am I alone in this problem? Coming to mind is a VRAM issue, but I am not one to speculate on such topics as it's not my professional area.
    Toogy Boogy,
    Tim D.
    iBook G4 1Ghz   Mac OS X (10.4.7)   Sun-spotted monitor; ladybird stickers; fadded 'S' key; burnt-out not working firewire; all else's d

    I have seen some wierd GUI rendering issues as well, notably, this one:
    http://www.n715dp.com/links/itunes7gui.jpg
    I can replicate this happening by closing the window (leaving the application running) and then opening it up again. The only way to make it go away is to click on the iTunes Store source and then back on my library again.

  • The title on the About Me page is only half showing

    When I publish my website, the title on the About Me page is only half visible. I have tried moving it, but it makes no difference. I have typed the title in Papyrus font, but had no trouble with this on my other pages.
    The website is at http://web.mac.com/zomosborne/iWeb/Site/about%20the%20Artist.html
    thanks for any help.

    Unfortunately it didn't work out as I thought. If you go to my website the name is still half cut off on About the Artist page. I pull the text box up and down and down but it stays cut off. I have checked for 'shadow' text boxes but there are none. Any other suggestions would be most welcome.

Maybe you are looking for