Rendering leaves video collage blurry.

I am assembling a 'video wall' within Final Cut Pro, using many layers of cartoons scaled down and tiled across the screen.
When I render, it leaves the videos blurred and slightly out of focus.
Any idea why?

I am looking at it on both my Apple Cinema display and and a Sony broadcast monitor. While it does look BETTER on the display I want it to look good on both, as this is a menu background for a DVD... meaning it will get played on both desktop computers AND televisions.
When I rendor and export as Qucktime, and view in Quicktime Pro it looks terrible. But the whole time I am editing it looks fine, then rendering it blurrs it.

Similar Messages

After rendering the video is blurry and pixelated.

I have 70 + hours invested in this edit. I recently rendered it for the first time and it became blurry and pixellated. I published it to see if it would come out clear but it did not. I found the tab for deteting rendered files and this seemed to help a little. I published that one and it was a little less blurry but still poor quality. How can I get the video back to the pre-render quality. I am using Powerpoint slides saved as jpegs. I did this in another video and the finished video was super clear, however, now after I rendered this one I am unable to get that same quality.

cwrardin
You need to supply more details than you have in order to get to the core of the issue.
What version of Premiere Elements are you using and on what computer operating system is it running? What do your computer resources look like, installed and available RAM, total and free hard drive space, location and free space for the Scratch Disks?
What are the properties of the source media that you are putting on the Timeline?
Based on the properties of your source media, what is the project preset that you or the program are setting in the new project dialog?
Video (video audio compression, frame size, frame rate, interlaced or progressive, file extension, duration, PAL vs NTSC, camera source, etc.)
Photos (how many, what format, what pixel dimensions)
What is your export choice and settings?
Let us start here and then we can decide the troubleshooting strategy.
Thank you.
ATR

Low Memory when rendering a video file (Win 8.1; HP Envy 700-230qe)

Rendering a 4-minute video (with several video tracks) using Sony Vegas Pro13, keeps stopping around 70-80% of completion --- saying that there's low memory.
How could that happen on a HP Envy 700-230qe with 32GB DDR3 memory?
I look at the Task Manager: the "Commited" memory keeps increasing during the rendering until it hits the full number (36 GB in my case) and then the memory is depleted, which stops the render.
(No changes to the system except addition of an SSD drive as main drive, and a Blu-ray burner)
This question was solved.
View Solution.

Hello @Mango7
I understand that you are having issues with rendering a video using Sony Vegas Pro 13. I suggest you look to the Vegas Pro - Video as it would appear there are settings within the software that should help you. If you cannot find a post that matches what you are trying to do or the issue you are facing I suggest you post there as it would appear that their are numerous community members there that are willing to help.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Is there a way to leave Video messages?

I am using iChat, I understand you can leave video messages to your buddies, provided they are not Off Line but is there any kind of software that would allow me to record and send a video message to someone?
Thanks
Frederic

There is no such thing as a video answering machine yet in iChatav3 .... but that would be a great option to have on this app, wouldn't it? You might want to suggest it on ichatav feedback.
For now though, you have a couple of options. Try using iMovie or QT Broadcaster and an iSight camera to record a short video message then export as a QT file to your desktop (or as an e-mail attachment) and send the file that way. In fact, you can even send such a file thru ichatav as well as thru aim or even gmail ...
And if you own mult. FW cameras and a fast enough cpu you may be able to use both ichatav and QT Broadcaster simultaneously which I have done a few times along with a video conference recorder (which is a 3rd app that can be downloaded for use with ichatav). Works great! Post back if you have further questions.
SDMacuser

When I watch YouTube videos on my iPhone 5 it sometimes suddenly drops in quality so much the whole video goes blurry and it's almost impossible to watch anything?? Help

When I watch YouTube videos on my iPhone 5 it sometimes suddenly drops in quality so much the whole video goes blurry and it's almost impossible to watch anything?? Help also I think it might have to do with my wifi but I'm not sure. Sometimes I also try to skip to sections of a vid and it just lags for ages and nothing happens.

mwall614:
Good for you! I haven't tried it, but I'm sure it works.
Enjoy your Pismo.
cornelius

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Poor Rendering of video in 10.4.7

After upgrading to 10.4.7 the rendering of videos purchased from iTMS has deteriorated significantly. There is much more pixelation and the experience when the window is maximized is unacceptable. What used to be fuzzy is now blotchy. This is especially bad in cartoons content as the lines are all jagged. It affects iTunes playback and Quicktime equally.
Am I alone in noticing this degradation?

Hello Don.
So which version of Mac OS X are you running now. What do you do to go back and forth to Mac OS 10.4.6 and Mac OS X 10.4.7?
What type of account is this (POP, IMAP, .Mac)?
In Mail, open Window > Activity Viewer. What do you see there when Mail refuses to quit? Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Go to Apple Menu > System Preferences > Accounts > Login Items. What do you see there?
Do you have any third-party Mail plugins? Do you have either a /Library/Mail/Bundles or a ~/Library/Mail/Bundles folder in the Finder?
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

I am having trouble rendering a video in After Effects CS6

I am having trouble rendering a video in After Effects CS6. My video is only 12 seconds long. I am using the "Ray-Trace" feature". Whenever I try to render this video I get this error message.
Also, the text turns into a giant black boxy blob whenever I turn off the Ray-Trace effect.
Somebody please help

That's a question for the Adobe forums.

How do I correct blurry pictures in iMovie? They are clear when I pause the video but blurry when playing the video.

How do I correct blurry pictures in iMovie? They are clear when I pause the video but blurry when playing the video.

Try sharing and see if the effect is still present when you play the shared movie. It can happen when playing within iMovie if there are insufficient resources to play a full resolution.
Geoff.

Video is blurry

In fcpx the the video is blurry when I play back in edit mode but is not when I export the video?

When editing, FCP X plays back at reduced resolution, so as to avoid dropping frames (it takes a lot of power to play back, especially if you have multiple layers and effects).
As innocentius said, you'll get improved appearance if you select high quality in playback preferences.
Andy

Adobe Premiere 7 video turns blurry / pixilated upon export. How do I get a high quality export?

Hello. I am editing a video in Adobe Elements 7.0. The footage is standard definition. I am ready to export the video, but when I do this the video comes out blurry or pixilated looking. The footage looks clear when I am actually editing it, but when I export it something goes wrong. I need one export in Flash (which will later be posted on the web) and one export as a Windows Media File or MPEG so it can be viewed internally on our office computers. I have played with copious settings, formats, compressions, etc. How do I export non-blurry, high quality, clear videos?
Thank you so much for your time and consideration. I really appreciate it.

Hi Mr. Hunt! Thank you so much for responding. I really appreciate it.
What is my project preset? That's a great question. My settings are:
General:
Editing Mode: DV NTSC
Timebase: 29.97 frames per second
Video:
Frame Size: 720 horizontal x 480 vertical
Pixel Aspect Ratio: D1/DV NTSC (0.9)
Fields: lower field first
Display format: 30fps drop frame timecode
Title Safe Area: 20% horizontal and vertical
Action safe: 10% horizontal and vertical
Capture:
Capture Format: HDV Capture (Footage/tape is SD, camera is HD, does this impact anything?)
Video Rendering:
Maximum bit depth - box is NOT checked
Previews:
File Format: DV NTSC
Compressor: DV NTSC
Color Depth: millions of colors
Optimize stills - box IS checked
Footage is shot on a Canon XHA1 Hi-def camera, but on standard definition tapes. Footage is shot drop frame.
Does that answer your question? If not, where would I go to find my presets?
I'll have to check out MS Windows Media Encoder.

Motion sequence - when rendered in FCP goes blurry.example picture in post

Im having a strange problem.
Im creating a 20 sec intro graphic sequence in Motion in the PAL format to go into my FCP sequence. When I export and bring into FCP - the video as expected is unrendered and the picture looks sharp-like it did in Motion. However - when I render - it becomes a little blurry (nice technical term...)...
Ive tried using all 3 field dominance settings on Export from Motion - no difference...
When I watch the Intro graphic .mov in the viewer outside the sequence - it looks good quality as it did...so how come when rendering it is loosing so much?
(size increased for emphasis) Left is Outside of sequence - Right is Rendered in Sequence
http://img694.imageshack.us/img694/7447/picture2yw.png
Any ideas? Thanks in advance
Message was edited by: SWAN909808

Motion
http://img527.imageshack.us/img527/9135/picture4x.png
FCP:
http://img11.imageshack.us/img11/572/picture5fe.png
http://img9.imageshack.us/img9/6167/picture6xq.png
hopefully that is visible...

Premiere Pro cs6 keeps crashing when im editing or rendering a video

When I am on Adobe Premiere Pro cs6 every 10-20 mins it crashes when im editing a video, it crashes more often when im rendering it (export media, ctrl+M). I dont mind when it crashes while im editing because i save the file regularly but when im rendering its a problem, it probably because the file is too big as i use dxtory to record skyrim but this is an expensive product so it should be able to render. I encode the file once ive chosen the format and stuff for the video and it says finish rendering in 50 mins or so and when it gets to like 4% rendering it says not responding. It then troubleshoots but then says 'close program'. this is very frustrating, please can someone help me. I've looked through the forums but i dont uinderstand many of the solutions as im not that good at computers
here are my computer specs:
Rating: 6.6 windows experience index
processor: AMD Phenom(tm) II X6 1035T Processor (6 CPUs 2.60GHz)
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601)
Ram: 6144mb ram (6GB)
DirectX Version: DirectX 11
Device
Name: NVIDIA GeForce GT 230
Manufacturer: NVIDIA
Chip Type: GeForce GT 230
DAC Type :integrated RAMDAC#
Approx. Total Memory: 4072 MB

>GeForce GT 230
What is your nVidia driver version?
There have been reports of problems with some older cards and some driver versions
http://forums.adobe.com/thread/1084197

Problems exporting HD video from Premiere Elements 9 for Vimeo (program crashes or video is blurry)

I have a 10 minute wedding video I am trying to export from Adobe Premiere Elements 9 to upload to vimeo. I followed the directions from this video: Exporting for upload to Vimeo with Adobe Premiere Elements on Vimeo to figure how to accomplish this. The first time I followed the directions, the resulting video file was fuzzy and blurry, not at all like the HD video I could view in the program before export. Since then, I've tried exporting it multiple times with different settings, and each time the program crashes when the video is around 95% complete. How can I rectify this situation? This is a wedding video I made for a paying customer who would like their video on vimeo as soon as possible.
Thanks for your help!
Let me know if you need more details or clarifications.
Laura

Laura
What are the properties of what you are putting on the Premiere Elements 9.0/9.0.1 Timeline? Are you working with a SD or HD file?
What have you set as the project preset when you started the projec?
1. So, video compression, audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio...as
much information as you can supply....sometimes the brand, model, settings of the camera recording the video will give us all the
information that you need to set up the project correctly or to verify that it has been set up correctly.
Case Study....
Let us assume that your video is 1920 x 1080 @ 29.97 progressive frames per second.
Project Preset in New Project Dialog
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
When you go to take your Timeline content to Vimeo from within the Premiere Elements 9.0/9.0.1 feature
Share/Online, you will discover that there is no Vimeo choice in that version.
So, what you are going to do is to export your Timeline to a file (AVCHD.mp4) saved to your computer hard drive and then upload that file
to Vimeo at the Vimeo website.
Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30
Have you been there and done that?
Summary...
The answers are in the details....needed
a. properties of source media
b. project preset
c. details of your project's Timeline content
c. export settings used
We will be watching for your follow up.
Thank you.
ATR

Keynote dropping sound when rendering to video

I am running Keynote 6.5 on the Yosemite 10.10.1 operating system in a MacBook Pro 1TB HD with 16 GB of Ram. I am having the problem of sound completely dropping off after about 2 minutes and 6 six seconds when exporting a slideshow to video. The operating system has been replaced and reinstalled, Keynote was deleted and reinstalled and I duplicated the problem on my second MacBook Pro.
After all of this it has been determined to be an Engineering issue and happens to be a problem that is apparently affecting Keynote on all MacBook's, at least within the sated system preferences.
Does anybody have any advice or knowledge pertaining to this matter? Or know when Apple may resolve the issue?
James

we tried the custom settings being adjusted and leaving them as it is.
Therefore you did not use custom settings?
I currently have 10.10.1 with Keynote 6.5 and 10.9.5 with Keynote 6.2.2, both these versions export without issue to Quicktime when using custom settings.
This is an example of a custom QT export for HDTV 1080p:

Rendering leaves video collage blurry.

Similar Messages

Maybe you are looking for