Rendering mov in final cut pro

I'm trying to export a 22 minute video in final cut pro and it continues to lock up on me when export line reaches 8 percent. Do I need to do something differently?

It may be due to a corrupted media or render file. Check to make sure it plays normally in FCP. If so, try exporting a self-contained movie (File-Export->QuickTime Movie).
If not you'll need to identify where the problem lays; a media or render file. If it's a media file, try playing it in QT Player. If it's a render file, trash it and re-render.
-DH
Message was edited by: David Harbsmeier

Similar Messages

  • TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

    when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
    i need to submit this movie for uni project tomorrow.
    any help/advice will help . thanks.

    According to Crash Analyzer
    -50 (QuickTime)
    This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
    good luck

  • I have an hd movie on final cut pro x; i want to create an sd disk of that movie. compressor created 2 files: dolby.... and mpeg2. How do I get these files burned to disc to create my sd movie?

    I have an hd movie on final cut pro x; i want to create an sd disk of that movie. compressor created 2 files: dolby.... and mpeg2. How do I get these files burned to disc to create my sd movie?

    These are elementary streams and they would be used by DVD authoring apps that use them for reasons like foreign language capability. Examples would be DVD Studio Pro, Adobe Encore, Toast.
    The most straightforward way to burn your DVD is either to use the Share feature in FCP or the Batch Template feature in Compressor.
    If you can find a boxed copy of iLife (try Amazon), it should have iDVD as part of the suite of apps. iDVD offers far more complete authoring capability than FCP or C4. iDVD  doesn't work with elementary streams; you'd just drag in your HD movie and you'd be good to go.
    Good lluck.
    Russ

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • When i try to play a movie in final cut pro it comes out black

    when i try to play a movie in final cut pro it comes out black thanks jt i have
    version 10.00

    Open the movie in the QuickTime player and report exactly what it says in the movie inpstecor. It's probably not in a spce that FCP supports.

  • When you "Send Movie to Final Cut Pro" and you cancel Rendering and how

    I am moving from iMovie to Final Cut Pro and have multiple movies to send to Final Cut Pro. I would like to cancel the rendering in FCP until I actuall need it.

    Uncheck Background Render:
    Al

  • Import movie from final cut pro x in pinnacle studio ?

    today i make movies with pinnacle studio (windows)
    i have pc with blu ray burner in pc (built in)
    i would like to buy mac with final cut pro x
    is it possible to make movie (high definition) in finacl cut pro x and export to a format which can be imported in pinnacle studio (version 14) without loss of quality
    then i would like to burn blu ray on my pc with pinnacle studio
    so : make movie with mac and burn HD movie on pc ?

    It'd be easier to get Toast 11 Pro and author/burn Blu Ray on your Mac.
    BUT, that's extra money you may not want to spend.
    Pinnecle, does it import XML files?  Well, that may not work anyway.
    You'll have to export a QT movie in FCP X that Pinnacle will read.

  • .Mov from Final Cut Pro not playing on PC

    I've made a short video edited with Final Cut Pro. The file was saved as a .mov QuickTime movie. The demo looked great on a Mac but it has to go to people who only have PCs.
    Loaded the demo onto the hard drive of the PC, but the demo is showing poor resolution. It Loaded the latest releases of QuickTime, tried putting QuickTime in safe mode, tried re-setting the screen resolution and tried using different PCs. Still get the same fuzzy screen. Even tried saving the demo in different formats from Final Cut Pro, but still no better.
    Any suggestions? Thanks-- Foster

    I have the same problem and need a good solution. On 2 seperate PC's. I believe (but don't know 4 sure) that it is something to do with Quicktime not using the Windows direct X environment.
    You could try going into quicktime / Edit / preferences / quicktime preferences / advanced /tick the safe mode GDI only circle ... restart quicktime and try again.

  • QT 7.1.5 can't play QT movie from Final Cut Pro 5.1.4?!

    I am editing a film in Final Cut Pro 5.1.4 on a PowerBook running 10.4.9.
    But when I moved a QT movie from FCP's "capture scratch" onto my Core 2 Duo MacBook, QT only showed me a white screen and asked me to search for third-party updates/plugins.
    To make things even stranger, I loaded the file into my MacBook's Final Cut Pro 5.0 and it runs in there flawlessly!
    Since this file is a pure FCP Quicktime video, in HD (Codec: HDV 1080i50, Integer (Big Indian), Timecode), I am very surprised that Quicktime won't play it - and that FCP will...
    Is this perhaps due to the fact that my MacBook doesn't have the Universal binary FCP 5.1.4 installed?
    I'd appreciate any help I can get.
    Thanks!

    Great! Thks David..I have not come up against this prob yet,but as I am progressing along a long edit,no doubt,I will..Your tip is extremely helpful.Thanks again from Australia.

  • Cannot play mov from final cut pro

    Hi out there,
    I received three mov videofiles with exactly the same length of 2.097.152 KB. This is a playout from a final cut pro editing system.
    When playing one of these files with quicktime 7.1 on a Win XP system there is a -2048 error message: "not a video file".
    It seems that the files are packed/compressed before from a bigger movie. Do you know which software will pack/unpack those mov files or how to view?
    Thank you in advance,
    Dave H.

    the source is FCP<<</div>
    That still doesn't say what the specific format the files are ... FCP can export to MANY, MANY QT (and other) codecs/formats. See if the files will play on a Mac. If so, while open in QT Player, hit Command j, then look to see what the specific codec is. It may just be a problem of not having the needed codec installed on the Windows system. Also, most Windows systems will require that the file has an extension in order to play properly.
    -DH

  • Can you import Quicktime movies into Final Cut Pro X

    I have a one week old Macbook Pro retina which replaces my old iMac 24 with Snow Leopard. After my purchase, I found out that Mountain Lion will not support FCE 4. The problem is that I have a lot of unfinished FCE projects and a lot of video clips that were imported using Final Cut Express 4 "Log and transfer" on my external drive. I was going to purchase Final Cut Pro X and edit them on  my new computer but first I was going to convert them to Quicktime videos. So my question is, can I open Ouicktime movies for editing in Final Cut Pro X? Or perhaps someone has aneasier way for me to achieve what I am trying to do.
    Thanks in advance........

    all of the videos that I imported using "Log and transfer" will only open in FCE 4.
    Do you mean the media in the capture scratch folder? These don't open in any other application? Not in the QuickTime player?
    If you mean the FCE project files, that's correct they will only open FCE4 or FCP7.

  • Help serious Audio rendering issues within final cut pro

    Hello
    I have some serious audio issues I am using Final cut 6.05. Here is my problem I am putting a AUParametricEq filter on my audio due wind noise etc. Anyway when i play it back on the time line it plays fine no problems but as soon final cut renders the file say for mastering to tape. at some point at the audio the audio goes all haywire, popping sounds or the audio just repeats it self at one frame or i can here audio from other parts of the timeline. And it just happened before i never had the issue. Is it the update. Hope anybody can help as I need to master about 6 projects to tape to clean my harddrives and all 6 projects have the same issue.

    Are your audio files AIFF 48K 16 bit?
    In regard to trashing preferences you can download Jon's Prefence manager at this site
    http://www.digitalrebellion.com/pref_man.htm
    The Old School method follows
    Trashing preferences and repairing permissions.
    Close Final Cut Pro.
    Go to: Users/your user name/Library/Preferences.
    Drag, "com.apple.FinalCutPro.plist" to the trash.
    Scroll down to the Final Cut Pro User Settings folder.
    Drag, "Final Cut Pro 6 Preferences" to the trash.
    Drag, "Final Cut Pro Obj Cache" to the trash
    Drag, "Final Cut Pro POA Cache" to the trash.
    Go to: Applications/Utilities/Disk Utility
    Select your system disk
    Click on the Repair Permissions button
    Wait for the permissions to be repaired
    Restart your computer

  • How Do I Import Photo to Movie into Final Cut Pro?

    Hi all - I just bought Photo to Movie for Mac and am attempting to import it into Final Cut Pro (which it says can be done). Anyone familiar with this? thanks for any help

    Maybe you should try the FCP forum, this one is FCExpress.
    Al

  • I made a movie in Final Cut Pro, it is about an hour long. Now that I am finished with the editing, I need to export it. However when I go to export ("Share", then "Export Using Compressor...") nothing happens.

    This movie is for a TV show, and this problem is very urgent. Help Please.

    I am having a similar problem.  I cannot export a 4 min. video of to imov or DVD, Youtube, ext. under Share.   Under imov. it takes about 3 hrs to finish then I get a message File Cannot Be Opened.  It leaves and imov icon  but when I select it, a message reads File May Be Damaged.  Under DVD it says The File Is To Large For Disk.
    If I need to reinstall Final Cut Pro X how do I go about doing that?
    Thanks

  • Error -108 in quick time x when I share movies in Final Cut Pro X

    HI,
    PLEASE NEED HELP!!!!
    After install LION a problem came out when I try to "share" my proyects, the funny thing is that only fails when I "share" to iPhone and iPad!, when i "share" to MAC and PC (1080p) it works wreat. the ERROR CODE -108 from QUICK TIME came out.
    I found that -108 means 'out of memory' but in my case is not possible (i think). I reinstalled the FCP X but the problem remain.
    I want to reinstall Quick time X but looks like it can't be unistalled, so any idea?
    Thanks!
    My MAC PRO 2010 setup:
    -2 x 2.93 GHz 12 core
    -48 Gb RAM OWC
    -4 internal Hard Drives:
          -OWC EXTREME 6G SSD 120Gb ( here is installed LION, Final Cut Pro X, Compressor, etc and I use it for my currect FCPX proyect only) 40Gb used, 80Gb free space
          -Original Apple HD 7,200RPM 1Tb  (iTunes library)
          -Original Apple HD 7,200RPM 1Tb
         -BARRACUDA 7,200RPM 3Tb   (EVENTS and PROYECT are here) 600Gb used
    -Graphic Card HD5870
    Thanks for your help!

    What is the exact spec of the clips that cause the problem?
    (Open one of the files with QuickTime and press Cmd+i to open the Inspector - then report back with the what it says).
    Andy

Maybe you are looking for