Rendering - New Mac or second Machine

Hello,
i got a requirement from a colleague. He catch a new project, where he have to do an imagemovie, which takes much power for rendering in after effects.
So now i have to find the best configuration for him to work with this project.
Two ways are possible in my view:
1. Buy a new machine with enough power, where he could render the movies and work parallel with other projects and applikations.
Which hardware requirements are needed for the new machine? I found the new MacPro, but this not available before april.
2. A second machine, only for rendering the movies and he could work with his MacBookPro.
Is it possible to get a windows or linuxmachine for rendering, if the projects come from a mac?
And are there any requirements for this renderingmachine?
Thanks for the help!
kind regards
Alex Hofmann

There should be no problems working with a project on a Windows machine that was started on a Mac.
Here is some information on hardware for After Effects.

Similar Messages

I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the base for my new macbook ?

I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the basis for my new macbook ?
The old OS was Mac X 10.5.8. I think the new one is 10.7.2 Lion.

Have a read here How do I set up a new Mac from an old one, its backups, or a PC?
Stefan

Migrating to new Mac via Time Machine: computers conflicting?

If I get a new Mac, and then during the Setup Assistant tell it to migrate from my Time Machine drive, will I have any conflicts with the old Mac? For example, will both computers have the same machine name? Will they be trying to write to the same Time Machine backup? I want to continue to use the old Mac, but want all my stuff on the new Mac, too.
Thanks!

misterMason wrote:
If I get a new Mac, and then during the Setup Assistant tell it to migrate from my Time Machine drive, will I have any conflicts with the old Mac? For example, will both computers have the same machine name?
Yes, but you can easily change one (or both) via +System Preferences > Sharing.+
Will they be trying to write to the same Time Machine backup?
No. Time Machine keeps track of which Mac is which by its +Ethernet Address,+ which is embedded in the hardware on the logic board.
If you're going to be backing-up both Macs to the same place, see #4 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

Migrating to new Mac using Time Machine

Hi,
I will be getting a new Mac soon and I want to take all of my apps with me in their current state so I will be using Time Machine to migrate to the new machine.
I was wondering what are the essential files that I need to transfer over so that all the apps stay in the same state as they were on my current Mac. (Without the need for me to re-enter licence codes and go hunting for libraries etc.)
The main applications this is a worry for are:
Photoshop CS4 (and its affiliated apps)
Aperture 2
iWork '09
various other applications that have licence codes attached to them

it's more to do with the preferences being saved intact on my new Mac, I need to know what essential files to choose off my Time Machine backup when I Sync it with my new Mac. I don't want the whole drive migrated because it is full of rubbish I want to get rid of.
If you have any idea of what preferences and other library files are essential then that will be a great help.

Moving to new Mac with time machine

Hi
I'm purchasing a new mac pro soon and i'm wondering if using 'time machine' will enable me to transfer everything to the new mac, with everything 'in place' as it was on the old mac, in other words will i have to re-install my apps? (i certainly hope not)

Yes. I was surprised how easy it was and how well it worked when I migrated from an eMac (PowerPC) to an Intel iMac a few weeks ago. You'll have an even easier time.
Just make sure to use Migration Assistant when you first power on your Mac; when it asks if you want to transfer data from another Mac. Don't click "no" or "later" and then proceed to start from scratch. Using Migration Assistant after your Mac has been set up could lead to a whole bunch of permissions issues.

I'm having issues backing up a new Mac with time machine and time capsule.

I've been trying to backup an extra macbook to the time capsule via time machine but the two sparsebundles (for two other Mac's) were taking up too much room. I deleted a heap of old backups from one of the sparsebundles to create enough room. The time capsule was still showing up as nearly full so I tried the method Pondini (God rest his soul) describes to "compact" the sparsebundle. That didn't work (I got this message in terminal):
hdiutil: compact failed - Function not implemented
I've had many other issues which required hard resetting the time capsule twice. And since then my wife's Macbook is having trouble backing up. I'm beginning to think I should maybe get an external HD and move all existing backups from the time capsule to the external HD. Do a factory reset on the time capsule and start from scratch. I guess my question is, does this sound like the best solution and if I move all the old backups to an external HD, will they be accessible.

Yes, the old backups if they are working now will also be able to work from archive on USB plugged into the TC or into the computer directly.
Then do an erase of the TC and start over.
TM is becoming less reliable with each new OS.. and so far Yosemite is proving the worst by a big margin.
Strongly recommend that it is time to use Carbon Copy Cloner or some other software.
I use both TM to a TC.. and CCC to local usb hard disk..

Can I install leopard on new mac pro intel machine

This machine came with Snow leopard on it but it is conflicting with a USB 3.0 card I have been trying to install.
I THINK it is conflicting because I have a similar card on a 2009 Mac Pro intel,
running Leopard and I have not had one issue since installing IT, many months ago.
So I thought I would put in a new HD (larger 2TB) and start a fresh install and go down to the Leopard so the USB 3.0 PCI card will work!
When I do the reboot to instal from the disc, it just sits on a grey screen for 15 min before I gave up.
I replaced the Leopard disc with a Snow Leopard disc and the boot from disc went as normal.
So..........

Like I said, issues.
You and many others:
http://www.macworld.com/article/1165672/add_usb_3_0_to_a_mac_pro_with_highpoints _rocketu.html
50-50 here:
http://www.amazon.com/HighPoint-RocketU-Quad-USB-3-0/product-reviews/B005K8AXN6
Allegro doesn't fare much better:
http://www.amazon.com/Sonnet-Allegro-2-Ports-Macintosh-USB3M-E/product-reviews/B 0054D8G0E

Re-associate new mac with Time Machine backup

I have got a new MacBook and I want to load it with a TM backup residing on a USB drive. I know this cannot be done unless hacking the terminal because TM associates the backup between MAC addresses. I have searched the web where I have learnt this fact and how to go about fixing it but I cannot get the commands to work for me. Can someone tell me what I do wrong?
My new computers name as in Sharing prefs is MyMacbook.
Putting this name into the line:
$ xattr -p com.apple.backupd.BackupMachineAddress MyMac
gives me "No such file" !!
PLEASE help!
(this has taken a good part of my last 2 days and why there aint a simple procedure to fix this provided by Apple is beyond me as this scenario cannot be rare?)

igroucho wrote:
"From a TM security copy etc"
It should be "From Time Machine or other disk." Do not select "From another Mac."
I get to a window showing me drives on my network but NOT the drive connected to the USB-port on which I have my TM backup
The display can be a bit misleading. If it shows a yellow or green icon, and the name of the computer and internal HD that was backed-up (not the disk it's on), those are your backups.
This drive has been checked and passed both by TechTools Pro 6.04 and DU and it shows on my desktop.
Do you mean Repair Disk (not permissions) via Disk Utility?
Are the backups full backups -- ie, with nothing major, like System files and Applications, excluded?
EDIT: If you don't get the prompt, you may be able to manually "inherit" the backups, per #B6 in Time Machine - Troubleshooting.
Message was edited by: Pondini

Is it possible to find the creation date of a CD/DVD burned on Mac OS 8.6 either on newer mac or Windows machine?

I am cataloguing lot of my old music and data cds/dvds. Some of these were created on my old Mac (OS 8.6). I was wondering if there was a way to check the metadata on these discs on my current Windows machine or on a Mac that I have at work to get this information. When I pop the CD and DVDs into the windows machine the dates that show up in the explorer window are actually older than the burn. I assume this is the CD creation date and not the burn date. It's not a huge deal, but it would help me delve deeper into nerd-dom!

One approach would be to have access to a Mac that can run the classic environment or has a pre OS X native installation. These should be able to read the files for dates of creation/modification. There is also SheepShaver that runs on OS X machines.
https://www.macupdate.com/app/mac/20615/sheepshaver
http://en.wikipedia.org/wiki/Classic_Environment
http://www.everymac.com/systems/by_capability/macs-that-support-macos-9-classic. html
https://discussions.apple.com/message/22597899#22597899

Transfer iTunes to new Mac from Time Machine, then sync with iPhone

Hi everyone,
I just sold my old Macbook (everything was backed up with Time Machine) and bought a new Macbook Pro. Now I want to copy the iTunes library back. The problem is, even if I copy all the music, video, apps, iTunes U... from Music/iTunes/iTunes Media/... to the new Macbook, iTunes still thinks (rightfully) that it is a new machine. So if I plug my iPhone to it and try to sync, it will ask to *remove all my apps*, music, contacts... and resync again. That would probably *remove every user data* I have in those apps.
Do you have any solution?

By any chance do you still have the old computer? If you do then copy /Home/Music/iTunes/ folder on the old computer to an external drive then transfer it to the new computer.
If you don't have the old computer then you have a little bit of a problem. Did you use Setup Assistant or Migration Assistant to transfer your files from the TM backup? Is the username (account short name) on the new computer the same as on the old computer? I'm guessing "no" because you are getting the permissions errors.

Migrating to new Mac with Time Machine?

I just got an new 27" iMac. I used my Time Machine backup to copy everything from my old IMac. Everything appears to have been copied correctly. All of my photos, music, documents and Adobe CS4 applications run. I was really impressed by how easy this was. I expected to have to reinstall the Adobe apps but it went perfectly. I am going to run this for a few days to test to see if everything works. This leads me to my question:
Can I use the same Time Machine backup on this machine? Or will TM want to re-archive everything again?
I clicked on Time Machine and this menu popped up. See jpeg.
[IMG]http://i49.tinypic.com/2wq7pu8.jpg[/IMG]
I was hoping to reuse this backup as though this is the same machine. Which button should I select? Reuse? I'd hate to ruin this archive by making the wrong choice. Any advice would be appreciated.
Thanks!
Message was edited by: Hey Cricket

Hey Cricket wrote:
I was hoping to reuse this backup as though this is the same machine. Which button should I select? Reuse? I'd hate to ruin this archive by making the wrong choice. Any advice would be appreciated.
Yes. Select "Reuse." See #B5 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum, for more details.

Please help. New Mac Air & Time Machine problems.

Recently I replaced my wife's MacBook with a brand new MacBook Air. We used an iomega model RPHD-TG external HD for Time Machine with FireWire on the old laptop.
However, since the Air does not have FireWire I am using the USB cable that came with it. It works fine when the Air is awake.
The problem is that whenever we put it to sleep then wake it we get this message every time:
"The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off." Then it proceeds to "repair" it then mount it.
Now, there is no on/off switch on this drive nor do we unplug it. Any ideas?

Open Energy Saver preferences. Look at the checkbox labeled, "Put the hard disks to sleep when possible." If it is checked then uncheck the box. See if that helps.
If your Iomega came with software to configure the drive for spindown when not in use, then disable that option.
Message was edited by: Kappy

Possible to restore iTunes safely to a new mac (from time machine backup) without using setup/migration assistant?

Hello all,
I have just acquired a new MacBook which I want to set up completely fresh. The only data I really need to restore/copy to it, besides a few document folders, is the iTunes library from my existing iMac. The iTunes library has been backed up using time machine on the iMac (using a portable drive). I’ve heard it might be possible for me to plug the time machine backup into the new MacBook and then option-click the time machine icon in order to 'browse other backup disks' and then restore iTunes. Would this work and would all my devices still sync with iTunes? I’m just a bit nervous because apple has migration assistant and setup assistant for doing this sort of thing - I just really don’t want to use them because the only thing I want on my new MacBook from the whole of the time machine backup is literally the iTunes library. I don’t want to start restoring user accounts which you must do with the assistants.
Thank you.

Thank you ever so much for the replies. Just one thing: the link you provided seems to discuss restoring individual items on the computer for which a backup has been made. On my macbook I can't click "enter time machine" which I'm guessing is because the time machine backup is for my old iMac (hence my comment about control clicking the menu bar).

Time Machine back up to transfer data to new Mac.

Hi - I am trying to transfer my old Mac data to my new Mac via Time Machine and an external hard drive. When prompted to select a back up source, "Time Machine Backups" shows as an option. On the next screen, "No OS X system back ups were found" appears. In the notes it says only complete back ups of Mac OS X appear on the list. I'm transfering data from a Mac OS X Version 10.6.8. How do I make sure it is complete? I just backed it up again from my old Mac to make sure it was the most recent data.
Thank you.

This website should have answers to your questions:
http://pondini.org/TM/Home.html
Ciao.

How do I use time machine to restore to a new mac

Just bought the new i mac. I'm using Mt Lion on my old mac and Time machine with a back up. How do i restore to my new mac from time machine?

Pondini's excellent resource provides some useful reading:
http://pondini.org/OSX/Setup.html

Rendering - New Mac or second Machine

Similar Messages

Maybe you are looking for