Rendering ONLY 0:00.01 of my project!

Hi, I'm still kind of new to After Effects, but this has never happened... When I render my composition, it only renders 0:00.01 of my whole project. It says In Point: 0;00;00;00 and Out Point: 0;00;00;01... I've tried many things but have not figured it out. Meanwhile my whole project is more than 1:15.00. Any help is appreciated.

You might have accidentally changed the gray bar at the top of your timeline graphical display.  You can drag
this out to the full length of your master comp timeline by holding shift while dragging to snap to
important points like keyframes in your time line.  It is a thick gray bar, not the thin gray bar that controls how much of the timeline you see in the viewport.  The thick gray bar displays the length of your Rendering Project.

Similar Messages

  • Long clip only appears as one frame in Project Story Board

    My Imovie project only appears as one frame in Project Story Board. How do I get it back to an extended, multi-frame project so I can work on it?

    In the Project Browser? There's a scale slider in the lower right which will let you zoom in. Is that what you mean?

  • JTree renders only 10 records

    I have a data model based on toplink and datacotrols were created on the toplink session. When I introduced a jtree bound with a data collection within datacontrol, it rendered only top ten records from the collection. When it is rendered in a jtable, all records were rendered. Any one knows why?

    Figured it out. Needs to change the rangesize.

  • Rendering only 1 frame

    This is a follow-up to posting http://discussions.apple.com/thread.jspa?threadID=1764783&stqc=true, which was never resolved. After following all efficiency recommendations, reinstalling Motion I finally upgraded both the OS (to 10.5.5) and the video care (to ATI X800 XT). The card helps a bit but the program/system is still having difficulty as a project complexity builds.
    I've taken to cutting effects down into subsets, rendering out elements and then building on additional elements, something that can be limited depending on the effect.
    Currently I have an effect of relatively few elements and the program will only render out 1 frame (actually yielding only a solid black frame) of a 02;12 segment.
    What else is there to do?
    Can't cut the elements down further. Using motion tracking from one, with Match Move in the other and a few filters between the two.
    Any help is appreciated.
    Apple really needs to upgrade this product. From the beginning it's been a program that is too functionally strong to run on its available hardware. Do we truly need to buy only top-of-the-line $15,000 Mac systems to run this program? If Apple wants to continue challenging Avid and Adobe they need to take this seriously; we indie producers/artists are their primary customers!

    I followed the advise in an article and I moved the flv and swf file into the root directory of my site (they were inside a folder before)
    I updated all the links and it now plays the video! but...
    Before I exported the video from After Effects through XFL to Flash, inside Flash exported in to a SWF, inside dreamweaver inserted the SWF on the page. The file was large (5MB) but played fine in a web browser.
    I got a few complaints from people with slower connections, so I wanted to add a pause/play button.
    So this time I exported from After Effects only half of the slideshow as an FLV. Then in flash I made the button. Now inside a web browser the file plays very slowly and constantly stops (which changes the button to 'play'). The browser is constantly loading the FLV file, which is now 7MB!
    It is only a slideshow of 6 pictures. I made them all 900px x 600px (my page size is 980) before adding them to AE.
    I would love to have this button functionality, but it still is just a banner/slideshow on my webpage, I dont need a full FLV player skin.
    Any reccomendations for me on how to display this file and also have pause functionality?
    the site is: www.daniellesmit.com/home
    Thank you
    Danielle
    Moderator:
    Shall I start a new post, it is kind of not relevant to the title anymore?

  • Why After Effects CC renders only 12 seconds ?

    I just got After Effects Creative Cloud and  to try it out, I made a 2 minutes long vidéo. When it's time to render it, it will only render 12 seconds and than stop, when I try to render more, the lines passes from green to blue. If somebody knows how to fix this, it would be really nice! By the way I got a Mac Book Pro with the latest version of OS X.

    If you mean render then your Output Module Render Settings are set to work area instead of composition length. Go through the basics.
    If you mean RAM preview then, depending on the project you will have to lower the resolution of your comp window preview or skip frames. AE is NOT a NLE and will NOT playback long high resolution sequences in real time. You cannot use all system ram for previews. More helps, free memory helps, but you have to learn to work around the limitations.
    My normal work flow for an animation is to plan, set up the timing of the animation using markers or other visual cues, set the initial motion keyframes, do a 1/4 or 1/2 rez motion preview, finish the final color grading and effects work checking key points of the animation at full resolution and full screen to verify the shot looks the way I want at just those key points, then I add that comp to the AME cue to render a test while I move on to the next shot or effect. Total amount of time I spend waiting for and looking at full resolution full length shots to RAM preview before rendering is zero minutes. Motion tests and initial animation can happen very quickly and this will give you time to refine the other elements of your 'shot' in a more productive manner. The only longer than a minute projects that I have done completely inside AE are dynamic text animations and most of that kind of animation is just motion so 1/4 rez motion tests are really all you need to do to check timing. Keep motion blur and other effects turned off while you're checking the timing, then turn them on, check a few key frames or a second or two of a transition and move on. You'll get way more done in a day.
    For most of my projects a 2 minute comp is extremely long. I suspect that you are trying to create a whole sequence in AE and edit there. AE is for shots. Most shots in movies or commercials are just a few seconds. You should be creating your shots in AE and editing the shots to tell the best story in a NLE. While this sounds like it involves more steps and is just more work to do, in the end, it's a way more efficient way to work.

  • Have an ajax memory tree in a pl/sql region be rendered only once in a page

    Hi all,
    I have a pl/sql region with region source calling a function "ajax_memory_tree.render". Everytime I come back to this particular page, I am having a tree being rendered. Can you give any suggestion as to how I can have only one tree. Thank you for your help/ideas.
    regards,
    Suma.

    procedure render_branch
      (p_type in varchar2, p_icon in varchar2, p_class in varchar2, p_id in number, p_pid in number, p_name in varchar2)
    is
    x varchar2(1000);
    y varchar2(2000);
    begin
    -- If the branch has sub nodes, render it with a +/- sign
    if p_type = 'exp' then
        htp.prn('<li style="vertical-align:right;"><img style="cursor:pointer;margin-right:15px;"
             src="/i/' || p_icon || '.gif" onClick="getTreeNode(this,''' || p_id || ''')" />
       <a class="' || p_class || '" href="f?p=' ||
       v('APP_ID') || ':1:' || v('APP_SESSION') || '::::P1_SELECTED_NODE:' || p_id || '">' || p_name ||
       '</a></span></li>');
    -- Otherwise, just render the item
    else
    if p_id = 5000 then
        select opt_path into x from e_navopts where opt_num = p_id and popt_num = p_pid
        and userid = v('APP_USER');
            htp.prn('<li style="vertical-align:right;margin-left:15px;"><img src="/i/wwv_bullet.gif" style="padding-right:8px;"/><a
      class="' || p_class || '" href="'||x || v('APP_SESSION')|| '::::'||
      '">' || p_name ||'</a></span></li>');
    elsif  p_id = 3000 then
        select opt_path into x from e_navopts where opt_num = p_id and popt_num = p_pid
        and userid = v('APP_USER');
        select opt_params into y from e_navopts where opt_num = p_id and popt_num = p_pid
        and userid = v('APP_USER');
           htp.prn('<li style="vertical-align:right;margin-left:15px;"><img src="/i/wwv_bullet.gif" style="padding-right:8px;"/><a
      class="' || p_class || '" href="'||x || v('APP_SESSION')|| '::::'||
      '">' || p_name ||'</a></span></li>');
    else
      htp.prn('<li style="vertical-align:right;margin-left:15px;"><img src="/i/wwv_bullet.gif" style="padding-right:8px;"/><a
      class="' || p_class || '" href="f?p=' || v('APP_ID') || ':1:' || v('APP_SESSION') ||
      '::::P1_SELECTED_NODE:' || p_id || '">' || p_name || '</a></span></li>');
        end if;
    end if;
    end render_branch;

  • Auto-populate of SHELL_shellName_shell Upper form DE only functions in one single-instance project shell.  The DE in the BP Upper Form needs to auto-populate in two separate single-instance shells.  How can I get this DE to autopopulate in both?

      The Unifier environment
    contains two single-instance project shells, INF and PBS, and two multiple-instance child project shells, INFS and
    PB.    There is a single instance, non-workflow
    business process, ‘Project Information’ that contains a data element in the
    upper form definition, Project ID.  The Project ID is set to auto-populate from the multi-instance “INFS”
    project shell attribute, which is populated manually. 
    Issue:  The auto-populate functionality for the
    Project ID ‘Shell_shellName_shell’ data element within the single-instance
    Project Information BP only functions within one of the shells, either
    INFS or PB, but not both.  The INF and INFS shells are currently deployed
    to production, PB and PBS shell are not.
    It is critical that Project ID ‘Shell_shellname_shell’ data element is populated correctly in the
    Project Information upper form of both shells, INFS and PB,
    because that data element is referenced by multiple business processes and
    integrations. 
    The attribute form definitions for both single and multiple instance project shells are identical.  The Project ID utilizes the same data
    element ‘SHELL_shellName_shell’ as is defined in both shell attribute forms
    (INFS and PB). 
    The data definition source is a Unifier system-level variable, SYS Shell
    Name (String, 128, Text Box)
    Potential Solutions:
    1. Create a Project ID DE of another data type which can
    be successfully auto-populated from either shell.  Drawback: all BPs and integrations which
    reference Shell_Shellname_shell will need to be rewritten.
    2. Investigate converting the Project Information single-instance
    to a  multi-instance BP, and create a
    separate instance for each single-instance shell type.  Same Drawback as Option #1, but with additional
    rework.  Most likely Project Information
    would have to be recreated as a new BP.
    Not sure that this option would even work.
    3. Create a separate Project Information BP for PB.  Drawback:  Two separate BPs for Project Information would
    need to be created.  All existing BPs
    refer to Project Information, so this option could potentially invalidate the
    ability to use the existing BPs in the PB shell.

    Was it really necessary to post the whole API description?!?
    Locale[] locales = Locale.ENGLISH();ENGLISH is not a method in class Locale, so do not add the braces "( );".
    Also, the constant ENGLISH is not an array, but just a single Locale object.
    You didn't say what your problem was. What do you want to achieve with your program and what is it that you don't understand?

  • Works fine in IE6 & 9, renders only background in IE7, wont load in IE8

    Hi, I'm relatively new to Browserlabs but am finding it very helpful.  My question has to do with how a page can renders OK in IE6, perfectly in IE9 and not even load ("page error") in IE8 - plus all I see in IE7 is the background.....
    Here is the link: http://www.imsgonline.com/engageinteractive
    the site is a Wordpress site, using much of the HTML5 Boilerplate in the HTML
    Of course, it works fine in FF, Safari and Chrome
    The only glitch in IE6 is that the background is missing, so it is kinda ironic that IE7 displays ONLY the background...
    I am viewing browserlabs on a mac, generally in Firefox.
    Any ideas / help would be appreciated!
    michael

    The IE8 problem appears to be the same as the issue described here on the Respond framework: https://github.com/scottjehl/Respond/issues/27#issuecomment-2109126
    This appears to be an IE8 issue exposed by the use of the html5-boilerplate stuff.  There are a couple of possible causes and workarounds identified in the thread - can you try them and see if this resolves the rendering in IE8?

  • Problem rendering -- only part of the comp gets rendered

    I'm puzzled as to why our comps are only getting the first part rendered. then it stops and the rest looks like a still image. could this be a memory issue?
    We're using IMacs with Tiger.
    Thank you!

    It's all being done from local files, either on the hard drive or on a flash drive. no network involved.
    It would seem the iMacs can't handle it for some reason. They hav 1GB RAM and the processor is wGH PPC G5
    This morning i tried the same file on a different computer in the lab, (the instructor's computer) a tower, memory: 1 GB, processer: 1.8, 1.8 GHz Power PC
    g5, and it works on that one.
    I'm puzzled because last year with the same computers we had no problem. It was the previous version of After Effects, fwiw.
    While i'm relieved to see that it could work on the instructor's computer, i'd like to know if there's anything that can be done to make the iMacs work too. are there settings i should be looking at in Preferences perhaps?
    Thanks much.

  • Only sound, when I export HDV project with Quicktime

    I'm working with Final Cut Pro 5.0 (yes I know I have to upgrade) with material from HV 20.
    When I export my finished project with the export to Quicktime opt. I can't watch the movie in Quicktime player, Itunes, VLC or MPEG Streamclip, only in FCP. The Sound is there but know picture.
    since I do not yet have DVD Studio I know have a problem, since I cannot make a DVD out of it.
    Or can I? Why is there no picture? How can I do it the best?
    I also tried exporting it through compressor to H.264 and quicktime. That as well didn't work.
    Grateful for help!!!
    /David

    Make sure that you have the current HDV codec present in your /Library/Quicktime folder. If you don't have the codec you will sound but no picture. The codec is automatically installed when installing FCS--but interestingly I had to manually install it from the FCS install packages using Pacifist when I upgraded to Leopard (on my PPC machine, the Intel one was OK).
    Unfortunately Apple does not make the codecs available for download--which makes no sense. If you want to pass an HDV movie over to another machine you must manually install the Apple HDV Quicktime codec. I don't even know if Apple considers this some sort of violation of their License.
    --Robert

  • How can I point the premiere to a blank folder and bring only the files needed for the project

    When I start premiere it loads all files from all my photo/video libraries (app 150 gb almost 20,000 photo).  I do not want to sort thru all these files for a project.  How can I point premiere Elements to a blank folder and get the appropriate media for a project as I
    need them.

    As Steve points out, there are really three programs in the Premiere and Photoshop Elements "suite," PrE, PSE and then Organizer, which links between the two, and is an Asset cataloging program. Because of the commonality of the GUI (Graphic User Interface), there can be confusion as to exactly which program one is in.
    If you launch just PrE, and not Organizer (can be launched from within either PrE, or PSE), the only Assets/media that you will see is that, which you have Imported into your Project.
    Also, having the Assets for a Project, in a separate folder, or folder structure, is a great way to set up the Project. This article goes into details on one set up method: http://forums.adobe.com/message/4491450#4491450
    Good luck, and hope that helps,
    Hunt

  • IDVD quits unexpectedly during menu rendering. I have burned a similar project before and it worked just fine. Suggestions?

    I have iDVD for iLife'11. Every time I try to burn my current project, iDVD unexpectedly quits around the same time during the rendering menus process. My macbook pro is practically brand new, and I have succesfully burned a very similar (and larger) project before with no problems. Does anyone know how to fix this issue?

    Hi
    My first thoughts
    • free space on start-up (Mac OS) hard disk - less than 25Gb (not probably on a new Mac Book Pro)
    • corrupted iDVD Pref file - trash it and re-start iDVD. (Or even better - start a new User Account and log into this and re-try - this forces Your Mac to do lot's of new error free pref files.
    • corrupted project - Start a brand new one - Don't use old problematic one
    • jumping from iDVD back to movie editor - results in iDVD BUG. Start a new iDVD project - or trash movie in iDVD and clean Media Assetts. Then re-try.
    Yours speculating. Bengt W

  • Activating Click event on Item Renderer only

    Hey. I'm working on a s:list and a click event problem. I have everything working just fine on the component and linking, but as you probably guessed, the event cues when anything on the s:list is clicked, including the scroll bar or empty space.
    Is there a quick fix to make the event only cue when an Item Renderer is clicked inside the list? Help would be much appreciated, I've been trying to solve this problem for a while.
    Thanks!
    RKaster

    Hi RKaster,
    do you need the reference to the item renderer by force or could you immagine a different approach? If you could work around that you could use the change event instead of the click event. The change event gets fired whenever the selection of items in the list change. A click on an item renderer of course will change the selection if the underlying item isn't already selected.
    If you can't work around the need of an item renderer reference you should experiment with the mouseChildren property of the List component (inherited from DisplayObjectContainer, see http://bit.ly/dhqCFS). IMHO of course
    Regards,
    Thilo

  • Rendering only specific portion of timeline

    If you have items throught the timeline that require rendering,
    how do you get it to render only one portion? Using In and out points
    around that area doesn't appear to work.

    No probs!
    as you probably know if you go to main menu>Sequence>Render only you have a range of alternative rendering options depending what you want to render and how your timeline is set (ST or RT)

  • Thunderbolt connection to projector doesnt work: only part of the screen is projected. Solution??

    When I hook up my air to a LCD screen only part of the image on the air is projected. Solution anyone?

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
    If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

Maybe you are looking for