Rendering Problem in FCP 6.01: throws footage out of synch

When I render my footage in FCP 6.01 it completely changes the footage to a different timecode in the clip so my final edit ends up completely different footage than what I orginally edited. It's extreemly frustrating. Anyone know how to fix this?
Mac Pro 2x2.66 Mac OS X (10.4.10)

I'll need more info to narrow down on the problem.
When you play it in the timeline, everything plays fine, right?
What format did you digitize? MiniDV?
What timecode is changing?
If you Export as quicktime movie, there is no timecode.
If your refering to the timecode in the browser, make sure your looking at the MEDIA START & END (Not the in & out)
When your refering different footage, are you speaking of a completely different shot from your footage? Or is the cut just off?
Check this setting:
Goto menu bar: SEQUENCE SETTING; click render control tab.
check on all boxes. set all to 100%. Codec=SAME AS SEQ
In the timeline, make sure all the tracks are on GREEN. (The bubble on the far end left)
Test some of the media files in iMovie or quicktime to see if they're corrupted in some way.
If there is no fix, you may need to re-install the app.

Similar Messages

*Rendering problem in FCP 7*

I have read some posts about this problem and I understand the issue is with the media and not with my MacBook. But a little example here: I imported through Log and Transfer a 30 seconds clip from my Canon HG20 camera *in the format AVCHD* who I understand is acceptable by FCP and the line above the timeline is gray, but when insert a little bit of text and the SmoothCam effect the line become red and I have to render again and again so I spent almost 30 minutes for a little clip. I dont know whats the problem and whats wrong here. Can some one explain this for me and give some advice? Thanks in advance.

Im not sure what is better, RT Unlimited or Safe?
Unlimited. This changes the playback quality of the footage to low res or high res, depending on the render bar color. To avoid dropped frames when possible.
Also Im not sure about convert my footage to ProRes. How can I make the conversion?
That's done in LOG AND TRANSFER. How did you get the footage into FCP in the first place? Voltaic? Toast 10? I think they offer that too. What codec is it in now?
Shane

Uninstall FCP for rendering problem? Then re-install?

I keep loosing my render files. I think the problem started when I installed an update for FCP. Now, the render files disappear. I'll render, but then they go away.
I've seen posts with others having this same problem. Would un-installing FCP work? Of course, I'll back up my video on an external drive - just in case. Then I'll re-install my FCP, hoping that this will solve my disappearing render files.
If you'd like more details to my rendering problem, here's the post I put up a few days ago that describes in greater detail what's happening...
http://discussions.apple.com/thread.jspa?threadID=1394901&stqc=true
Do you think un-installing would work?

Hi JGD 500, and a warm welcome to the forums!
I noticed there is no mention of hardware space - should there be? This information doesn't show up anywhere in the disc utility diagnostics/profile - leading me to the thing the harddrive is busted - but the hardware test found no problems.
Yes, I believe if it can't see the HD, it won't test it or even mention it.
I've seen several Notebook HDs die within a years time, they've always been the worst HDs, but I think the pressures of today's world are making them even worse.

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command R) for rendering, cordially

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command + R) for rendering, cordially

Do you use still images in your edit? Make sure all your images are RGB (not CMYK etc).
Hope it helps
Andy

Color banding in problems in FCP

I've been struggling with the color banding problem in FCP for quite some time now...
Source footage looks GREAT (smooth gradients from dark to light in the sky, for example).
Once I bring that footage into FCP - whether it is simply displayed in FCP or rendered as a QT (prores 422 - plus all other options) there is very noticable color banding in the gradient areas of the image.
The common answer on this forum is that color cannot be judged accurately on a computer monitor.... but the source material looks FINE on my computer monitor - no banding! But banding is very evident once I bring it into FCP.
Hoping somebody has the magic bullet -

Maybe the sky gradient example is a little abstract.... (since you don't have the examples in front of you)
More to the point -
If I render a simple fade-up from black - same result - really noisy banding that crawls through the as image as it ramps up from black.
Surely I must have something wrong in the way the preferences are set in FCP - 'cause I can't imagine this being acceptable to any editor or end user.... it looks pretty awful.
What am I doing wrong?
Anybody?
Thx
-ds

Rendering problems in AE CC.

Hello,
Problem description:
I'm having rendering problems in AE CC. During the render process of the video material, which occurs in random parts of the file, the computer just keep restarting itself. There is no blue screen or any error log in windows event viewer. I’ve tried rendering my project multiple times with different settings (changing multiprocess settings, RAM allocation or moving temp/source files to another disk) but I’m still coming up with this problem.
I have installed and run any kind of benchmark software and put PC under heavy stress-test for couple of hours to make sure there isn’t any hardware- or temperature-related problem. I also have a second Dell Precision T3610 workstation with the same specs, and exactly the same problem occurs. Another thing is, that on different computer with some random specs, I’ve tried to render the same project and there is no problem at all – so my project seems to be fine.
Used machine:
Dell Precision T3610
- Windows 7 sp1 x64
- Xeon CPU E5-1620 3,70GHz
- Samsung SSD 840 EVO ver 6.1.7600.16385
- 16gb Dell DDR3 Quad-1866 MHz
- Quadro K2000
version Adobe:
-adobe after effect 2014.2 version 13.2.0.49
-creative cloud 1.9.0.465
System drivers:
- all updates on windows to 03.2015
- graphics card nvidia 347.52
Please, let me know if You need more information.
Best regards,
Adam Zielke

So, any comp with that footage crashes AE, but comps without are fine?
Try transcoding that footage with the Adobe Media Encoder into a production codec (for example, QuickTime with the Photo-JPEG codec or, for truly lossless, QuickTime with the PNG codec).
See if that project will work. That'll help us figure out if it's reading the CR2 files that is causing the problem or the EXR writing that's the issue.
If it turns out the CR2 files are causing the issue (because AE works with the intermediate files or the Adobe Media Encoder won't even work with them), file a bug report and let Adobe know that you're willing to include a sample video file so they can test with it. Adobe - Feature Request/Bug Report Form

Canon HF10 Problem in FCP

Hi,
I saw something similar in some of the other message boards but didn't understand it.
I shot a feature film using a canon hf10 at 24p and a panasonic hpx170 at 24p. I brought the panasonic footage into fcp using log and transfer. however, when i try to bring the canon footage in log and transfer reads it as 30p, and not 24. the camera is clearly set to 24p. Is this a problem with FCP or with the Canon? Will I have to convert my footage? Will this cause any problems? Please advise.
Thanks,
Jordan

Jordan-
What you'll need to do is to take your .mov files you log and transferred from the HF10 and put them into Compressor. Inside of Compressor convert them into ProRes 422 LT with Frame Controls On - and select "Remove Telecine" under the Deinterlace drop-down.
What's happening is that the HF10 shoots 24p footage and then wraps it in a 60i wrapper using a processing called telecine. You just need to remove the telecine and the footage will be fine.

AFTER EFFECTS CS4 Rendering Problems....

Hey people I have been having some rendering problems on CS4 It's very random when i'm getting these errors, sometimes it's just for the one frame..which i'm not bothered about because at 60fps, 1 frame isn't going to be noticable. But at the end of my last render, the last 10 frames are like this, but differ between pink and white at the top. (see picture at the bottom)
Here are my settings
lossless, with audio checked
avi output format
no compression method
Also i've re-rendered the dodgy footage in sony vegas but that didn't change anything
that is what the frame looks like....
If anyone can help me id be so thankful.... so please post!!!
also if you have any questions just post and i will get back to you ASAP

Since we don't know what this frame is SUPPOSED to look like, it's extremely difficult to offer up a solution.
If you're talking about the weird color in the corners, you can work in 16 or 32-bit comps, or add a little noise to the image. Not much.

Need to export MAC PRO RES HQ footage out of FCP and into premiere friendly format

Ive been forced to switch platforms mid project (mac -> PC) and luckily have obtained picture lock so theres no loss to having lost my FCP project. The problem has been that when i went to load my footage into premiere or to even play the files with VLC nothing worked, and i discovered that it was infact the codec, which was a MAC only PRO RES HQ codec, so now i need to re-export my footage out of FCP into a windows usuable format.
What is the best codec/format to use that will maintain the original quality? Filesize is not an issue.

As Jim mentioned, you'd have to use an uncompressed codec--probably QuickTime Animation, as I'm not sure you can encode to an uncompressed AVI on the Mac.
You might also consider something like
Sheer Video. It's a QuickTime codec for both Mac and PC. You'd have to purchase the Mac encoder component, and I think you could then get the free playback component on the PC--though you might actually have to buy the PC version, too. There's also Digital Anarchy's
Microcosm. Both of these codecs are perceptually lossless, but offer far greater compression ratios (and manageability) than Animation. Not saying either is the best option, but they are options, nonetheless.

Rendering problem in output of Pages 5.1

Has anyone else seen a print rendering problem when trying to print a table in Pages 5.1?
All my text in tables is jagged and lower-resolution than other text:
(Printed from Pages 5.1 (1769) on a HP Color LaserJet CP2025 from a retina MacBook Pro original model running Mavericks 10.9.1.)
To see the problem, you must look at the full size image. Right-click to open it in a new tab.
The type is set to Helvetica 12 pt black.
The borders are set to 0.5 pt black. The top two lines have a border on all sides.
The top line's border is nearly invisible; on the full size image you should see a faint blueish line.
The middle line's box box is supposed to be  a full box, but it is missing two sides. But at least this hairline renders properly.
The pdf of the same file looks fine on screen, even at high magnification. The problem only shows up in print.
The same problem exists in Numbers (where I first experienced it):
https://discussions.apple.com/message/24695801#24695801

I see you followed Jerry's advice to post over here, and haven't got any responces, so I'll at least try to get a little more information into the discussion.
Since the document prints to pdf correctly, but not to the actual printer, it seems likely that it is a print driver issue. In the Numbers discussion on the issue, the original person with the issue was using a HP printer with a postscript driver. Since the HP support site was not very clear about whether a driver for that printer on Mavericks even existed, and the recommendation for a generic driver was for a PCL driver, not postscript, I suspect that they were not using a recommended configuration. It would probably be helpful to know the details about your printer and print driver.
Do you have access to more than one printer to test this on?
The new versions of Numbers and Pages are doing something strange in terms of how they copy tables to the system clipboard; the pdf version is no longer available, only bitmap images. Print to pdf, however seems to still get the pdf data. I don't think this should have anything to do with the data getting to the print driver, but it does seem consistent with your results.

Problems with FCP 5.1.4 and OSX 10.4.9

I upgraded to Tiger, installed the new FCP Studio and everything was working fantastic.
The next morning there was a software update for Tiger and FCP-5.1.4, it's been a nightmare ever since. When I restarted FCP would not recognize my Sony HDR FX1.
I had this problem once before with 4.5 and I fixed it by re-installing FCP and doing the upgrades, so that's what I did with 5 but this time there was a new problem. It wouldn't let me work on anything that I had opened since I did the software update, so I had to do the update again and then FCP wouldn't recognize my camcorder again on startup. If you pressed log and capture you could control the camera but no capture was possible.
So I re-set the easy set-up and presto! everything was fine and I worked productively for a few days.
But then I had to capture some SD from my Canon GL2 so I reset all the settings for DV NTSC and reset the easy set-up for DV NTSC but now FCP won't recognize my GL2 on start-up. If I click log and capture I can control the camera but no capture.
My next try to solve my problem was to downgrade back to my original 10.4.6 and FCP 5.1
That put be back to square one and everything works fine again except I am left with the problem that everything that I worked on after I did the update won't open, I get error 41.
Now I know this is because I am now trying to work on these projects with 5.1 after they were worked on in 5.1.4. But the problem is that everytime I update to 5.1.4 I can no longer capture or print to tape.
I tried the trashing the FCP prefs thing and the repairing permissions thing but I can't seem to solve the problem.
Has anyone else had any problems using FCP 5.1.4 and OSX 10.4.9?

Not sure how you tried to install 10.4.8 but if all
else fails you can always reinstall the original
operating system that came with your Mac using 'Erase
and Install' then upgrade it to 10.4.8 - probably in
stages.
Erase and install should be used as a last resort! A better option is to use the "archive and install" feature. It renames your old system folder and creates a new one for the OS you just re-installed. That way you don't have to reinstall everything, your user accounts and emails should all still be there, and if something doesn't work, you have your old system folder to pull things like preference files out of.
Eric

Choppy video playback with FCP 6 and 5D footage already converted to Aplle ProRes 422

I am trying to edit a film I shot on the Canon 5D using FCP 6. I converted my raw files from the Canon 5D to Apple ProRes (HQ) .
But as I try to work on the timeline everything is super choppy and drops frames constantly. I am trying to sync audio as well and it's been impossible since the video in not playing properly.
I have read many post and did everything you say to do, but no luck.
I have chosen the unlimited RT and still dosent wanna play right.
I'm editing off a 1TB G-RAID drive. It currently has 200GB left of free space, so that shouldn't slow things down. My computer has a 500GB Internal Hard Drive and I currently have 250GB of internal free space. Here are the specification of my computer:
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3.2 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          12 MB
Memory:          18 GB
Bus Speed:          1.6 GHz
THis should be a powerful computer, at least thats what I tough when i got it. There has to be a solution to my frustration..please help!!!

You could have a problem with your external drive. Run diskutility: diskrepair and diskwarrior (if you've got it) on it Is it formatted macosextended?   You might run a drive speed test and see if the drive is running up to spec.
Try copying one file to your internal drive and see if that plays any better.
Have you tried deleting your fcp preferences? (get preference manager from www.digitalrebellion.com)
Are you just monitoring the video on the computer screen?
You might try resetting your window arrangement in fcp; window: arrange: standard and see if that makes a difference.
Is playback uneven on both viewer and canvas in fcp?
I'd go out and buy a 7200 Sata drive and install it internally and try playing off of that. MacPro's have 4 internal drive bays and it's extremely easy to install another drive.

Spry Menu Bar 2.0 (1.0) - Handling of widget generated CSS, placement and rendering problems in CSS

Hello:
I wanted to repost my question to re-frame the issue based on what I have learned thus far.
I am working on a website that has been developed using the Spry Menu Bar Framework UI (2.0) I.0, that has some peculiar rendering problems that affect IE 6 in particular. The CSS is reprinted below.
In particular, when I post the widget generated CSS in the head as it is orginally situated by the framework, the menu bar works fine. However, it seemed to me that I should be able to reduce page weight (an important consideration considering my target population) by placing it in the general style sheet governing the entire site.
When I place the styles at the beginning of the style sheet the menu doesn't render at all in any of the browsers (IE 6+, Firefox, Opera, Safari, Netscape, etc.) as it conflicts with the general rules governing links that appear later in the style sheet. When I place the styles specific to the Menu bar at the end of the style sheet, then the menu bar renders properly in all browsers except IE 6.
The odd thing is that the only way to ensure that the menu bar works in IE 6 is to keep the menu related styles in the head of each page. This raises problems related to page weight (not an insurmountable consideration if no other solution can be found) but still an issue. Likewise I need to support IE 6, again given the target audience/population. The issue obviously has something to do with specificity, but I am not certain that is the only consideration at work here. I have not tried the !important selector in regard to the menu, as IE 6 seems to only partially support this.
Thanks in advance for any advice or insight that can be provided. Thanks in particular to Martin for his contributions to my earlier question related to this issue.
Steve Webster.
The CSS governing the horizontal menu bar is as follows: (currently the following CSS is embedded in the head of the web page)
<style type="text/css">
/* -- Begins Spry Menu Widget 2.0 (1.0) Horizontal menu bar Custom styles -- */
/* BeginOAWidget_Instance_2141544: #MenuBar */
/* Settable values for skinning a Basic menu via presets. If presets are not sufficient, most skinning should be done in
   these rules, with the exception of the images used for down or rightpointing arrows, which are in the file SpryMenuBasic.css
     These assume the following widget classes for menu layout (set in a preset)
   .MenuBar - Applies to all menubars - default is horizontal bar, allsubmenus are vertical - 2nd level subs and beyond are pull-right.
    .MenuBarVertical - vertical main bar; all submenus are pull-right.
   You can also pass in extra classnames to set your desired top levelmenu bar layout. Normally, these are set by using a preset.
    They only apply to horizontal menu bars:
        MenuBarLeftShrink - The menu bar will be horizontally 'shrinkwrapped' to be just large enough to hold its items, and left aligned
        MenuBarRightShrink - Just like MenuBarLeftShrink, but right aligned
        MenuBarFixedLeft - Fixed at a specified width set in the rule '.MenuBarFixedLeft', and left aligned.
        MenuBarFixedCentered - - Fixed at a specified width set in the rule '.MenuBarFixedCentered',
                        and centered in its parent container.
        MenuBarFullwidth - Grows to fill its parent container width.
    In general, all rules specified in this file are prefixed by #MenuBar so they only apply to instances of the widget inserted along
   with the rules. This permits use of multiple MenuBarBasic widgets onthe same page with different layouts. Because of IE6 limitations,
    there are a few rules where this was not possible. Those rules are so noted in comments.
#MenuBar {
    background-color:transparent;
   font-family: Arial, Helvetica, sans-serif; /* Specify fonts on onMenuBar and subMenu MenuItemContainer, so MenuItemContainer,
                                                MenuItem, and MenuItemLabel
                                                at a given level all use same definition for ems.
                                                Note that this means the size is also inherited to child submenus,
                                                so use caution in using relative sizes other than
                                                100% on submenu fonts. */
    font-weight: normal;
    font-size: 17px;
    font-style: normal;
    padding:0;
/* Caution: because ID+class selectors do not work properly in IE6, but we want to restrict these rules to just this
widget instance, we have used string-concatenated classnames for our selectors for the layout type of the menubar
in this section. These have very low specificity, so be careful not to accidentally override them. */
.MenuBar br { /* using just a class so it has same specificity as the ".MenuBarFixedCentered br" rule bleow */
    display:none;
.MenuBarLeftShrink {
    float: left; /* shrink to content, as well as float the MenuBar */
    width: auto;
.MenuBarRightShrink {
    float: right; /* shrink to content, as well as float the MenuBar */
    width: auto;
.MenuBarFixedLeft {
    float: left;
    width: 80em;
.MenuBarFixedCentered {
    float: none;
    width: 80em;
    margin-left:auto;
    margin-right:auto;
.MenuBarFixedCentered br {
    clear:both;
    display:block;
.MenuBarFixedCentered .SubMenu br {
    display:none;
.MenuBarFullwidth {
    float: left;
    width: 100%;
/* Top level menubar items - these actually apply to all items, and get overridden for 1st or successive level submenus */
#MenuBar .MenuItemContainer {
    padding: 0px 0px 0px 0px;
    margin: 0;     /* Zero out margin on the item containers. The MenuItem is the active hover area.
                For most items, we have to do top or bottom padding or borders only on the MenuItem
                or a child so we keep the entire submenu tiled with items.
                Setting this to 0 avoids "dead spots" for hovering. */
#MenuBar .MenuItem {
    padding: 10px 10px 10px 4px;
    background-color:#000088;
    background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Nav igation%20Bar%20Segment-Dark.png);
    background-repeat:repeat-x;
#MenuBar .MenuItemFirst {
    border-style: none none none none;
#MenuBar .MenuItemLast {
    border-style: none none none none;
#MenuBar .MenuItem .MenuItemLabel{
    text-align:center;
    line-height:1.4em;
    color:#ffffff;
    background-color:transparent;
    padding: 0px 18px 0px 5px;
    width: 10em;
    width:auto;
.SpryIsIE6 #MenuBar .MenuItem .MenuItemLabel{
    width:1em; /* Equivalent to min-width in modern browsers */
/* First level submenu items */
#MenuBar .SubMenu .MenuItem {
    font-family: Arial, Helvetica, sans-serif;
    font-weight: bold;
    font-size: 15px;
    font-style: normal;
    background-color:#000088;
    padding:0px 2px 0px 0px;
    border-width:0px;
    border-color: #cccccc #cccccc #cccccc #cccccc;
    /* Border styles are overriden by first and last items */
    border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst {
    border-style: none;
    padding: 0px;
#MenuBar .SubMenu .MenuItemFirst .MenuItemLabel{
    padding-top: 0px;
#MenuBar .SubMenu .MenuItemLast {
    border-style: none none none none;
#MenuBar .SubMenu .MenuItemLast .MenuItemLabel{
    padding-bottom: 10px;
#MenuBar .SubMenu .MenuItem .MenuItemLabel{
    text-align:left;
    line-height:1em;
    background-color:transparent;
    color:#ffffff;
    padding: 10px 10px 10px 10px;
    width: 240px;
/* Hover states for containers, items and labels */
#MenuBar .MenuItemHover {
    background-color: #2E35A3;
    background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Nav igation%20Bar%20Segment%20Light2.png);
    background-repeat:repeat-x;
#MenuBar .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
    background-color: transparent; /* consider exposing this prop separately*/
    color: #ffffff;
#MenuBar .MenuItemHover .MenuItemLabel{
    background-color: transparent;
    color: #ffffff;
#MenuBar .SubMenu .MenuItemHover {
    background-color:#2E35A3;
#MenuBar .SubMenu .MenuItemHover .MenuItemLabel{
    background-color: transparent;
    color: #ffffff;
/* Submenu properties -- First level of submenus */
#MenuBar .SubMenuVisible {
    background-color: transparent;
   min-width:0%; /* This keeps the menu from being skinnier than theparent MenuItemContainer - nice to have but not available on ie6 */
    border-style: none none none none;
#MenuBar.MenuBar .SubMenuVisible {/* For Horizontal menubar only */
    top: 100%;    /* 100% is at the bottom of parent menuItemContainer */
    left:0px; /* 'left' may need tuning depending upon borders or padding applied to menubar MenuItemContainer or MenuItem,
                    and your personal taste.
                   0px will left align the dropdown with the content area of theMenuItemContainer. Assuming you keep the margins 0
                    on MenuItemContainer and MenuItem on the parent
                    menubar, making this equal the sum of the MenuItemContainer & MenuItem padding-left will align
                    the dropdown with the left of the menu item label.*/
    z-index:10;
#MenuBar.MenuBarVertical .SubMenuVisible {
    top: 0px;
    left:100%;
    min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse */
/* Submenu properties -- Second level submenu and beyond - these are visible descendents of .MenuLevel1 */
#MenuBar .MenuLevel1 .SubMenuVisible {
    background-color: transparent;
    min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse*/
    top: 0px;    /* If desired, you can move this down a smidge to separate top item''s submenu from menubar -
                that is really only needed for submenu on first item of MenuLevel1, or you can make it negative to make submenu more
                vertically 'centered' on its invoking item */
    left:100%; /* If you want to shift the submenu left to partially cover its invoking item, you can add a margin-left with a
                negative value to this rule. Alternatively, if you use fixed-width items, you can change this left value
                to use px or ems to get the offset you want. */
/* IE6 rules - you can delete these if you do not want to support IE6 */
/* A note about multiple classes in IE6.
* Some of the rules above use multiple class names on an element forselection, such as "hover" (MenuItemHover) and "has a subMenu"(MenuItemWithSubMenu),
* giving the selector '.MenuItemWithSubMenu.MenuItemHover'.
* Unfortunately IE6 does not support using mutiple classnames in aselector for an element. For a selector such as '.foo.bar.baz', IE6ignores
* all but the final classname (here, '.baz'), and sets thespecificity accordingly, counting just one of those classs assignificant. To get around this
* problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate compound classnames for IE6, such as 'MenuItemWithSubMenuHover'.
* Since there are a lotof these needed, the plugin does not generate the extra classes formodern browsers, and we use the CSS2 style mutltiple class
* syntax for that. Since IE6 both applies rules where
* it should not, and gets the specificity wrong too, we have to order rules carefully, so the rule misapplied in IE6 can be overridden.
* So, we put the multiple class rule first. IE6 will mistakenly apply this rule. We follow this with the single-class rule that it would
* mistakenly override, making sure the misinterpreted IE6 specificity is the same as the single-class selector, so the latter wins.
* We then create a copy of the multiple class rule, adding a '.SpryIsIE6' class as context, and making sure the specificity for
* the selector is high enough to beat the single-class rule in the "both classes match" case. We place the IE6 rule at the end of the
* css style block to make it easy to delete if you want to drop IE6 support.
* If you decide you do not need IE6 support, you can get rid of these,as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.jsscript.
* The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser isInternet Explorer 6. This avoids the necessity of IE conditionalcomments for these rules.
.SpryIsIE6 #MenuBar .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
    background-color: transparent; /* consider exposing this prop separately*/
    color: #ffffff;
.SpryIsIE6 #MenuBar .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
    background-color: transparent; /* consider exposing this prop separately*/
    color: #ffffff;
.SpryIsIE6 #MenuBar .SubMenu .SubMenu /* IE6 selector */{
    margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
/* EndOAWidget_Instance_2141544 */
/* Ends Spry Menu Bar Widget 2.0 (1.0) Horizontal Menu Custom styles */
</style>
The CSS governing the site generally is reproduced below: (my belief is that it is the a:link, a:visited, a:hover, a:active styles that may be in conflict).
@charset "utf-8";
body {
    font: 100% Verdana, Arial, Helvetica, sans-serif;
   min-height: 0; /* This is necessary to overcome the "haslayout" bugthat is found in Windows 7 in conjuction with IE8. For Moreinformation see: URL -- http://reference.sitepoint.com/css/haslayout.html */
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align:center; /* This allows for the centering of the container and overcomes a bug inherent in IE 5 */
    color: #000000;
    list-style-image: none;
    background-color: #FCFCFC;
h1,h2,h3,h4,h5,h6 {
color:#000066;
a:link {
    color: #151A96;
    text-decoration: underline;
a:visited {
    text-decoration: underline;
    color: #1B8DCD;
a:hover {
    text-decoration: none;
    color: #F30A0A;
a:active {
    text-decoration: underline;
    color: #151A96;
#container {
    width: 960px;
    margin: 0 auto; /* the auto margins (in conjunction with a width) center the page */
    text-align: left; /* this overrides the text-align: center on the body element. */
    background-image:
    url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Website%20Midsection %20_960.png);
    background-repeat: repeat-y;
#header {
       padding: 0; /* this padding matches the left alignment of the elementsin the divs that appear beneath it. If an image is used in the #headerinstead of text, you may want to remove the padding. */
        width:960px;
        height:332px;
        background-image:
        url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Website%20Header_960 .png);
        background-repeat:no-repeat;
#header h1 {
    margin-right: 0px; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
    padding: 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
    display:none;
#header img {
    display: none;
#Main_nav_contents {
    padding: 0;
    margin-top: 0px;
    height: 39px;
    width: 950px;
    padding-top: 275px;
    padding-left: 39px;
    z-index: 3;
#MenuBarVertical {
    margin-bottom: 50px;
    padding-top: 50px;
    padding-bottom:200px;
    padding-left: 15px;
    padding-right: 15px;
.mainContent_left {
   margin: 0;/* the right margin on this div element creates the columndown the right side of the page - no matter how much content thesidebar1 div contains, the column space will remain. You can removethis margin if you want the #mainContent div's text to fill the#sidebar1 space when the content in #sidebar1 ends. */
    padding-left:30px;
    padding-right:20px; /* remember that padding is the space inside the div box and margin is the space outside the div box */
    width: 600px;
    float: left;
.sidebar_right {
    float: right; /* since this element is floated, a width must be given */
    width: 270px; /* the actual width of this div, in standards-compliant browsers, or standards mode in Internet Explorer will include the padding and border in addition to the width */
    margin-top: 30px;
    margin-left:0;
    margin-right:10px;
    font-size:90%;
.mainContent_right {
    margin-left: 10px;
    padding-left:30px;
    padding-right:20px;
    width: 600px;
    float: right;
.sidebar_left {
    float: left; /* since this element is floated, a width must be given */
    width: 270px; /* the actual width of this div, in standards-compliant browsers, or standards mode in Internet Explorer will include the padding and border in addition to the width */
    margin-top: 30px;
    margin-left:30px;
    margin-right:0;
    overflow: hidden;
    font-size:90%;
.main_content_centered {
    width: 650px;
    margin-left: 155px;
.main_content_centered_header {
    margin-left: 75px;
.sidebar_textbox {
    margin: 0px;
    width: 260px;
    padding: 2px;
.sidebar_textbox_header {
    width:255px;
    height:58px;
    background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Por trait%20Textbox%20Header.png);
.sidebar_textbox_background_middle {
     width: 255px;
    padding-top: 12px;
    padding-bottom: 10px;
    background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Por trait%20Textbox%20Middle.png);
    background-repeat: repeat-y;
.sidebar_textbox_content {
   /* The width and padding are set as follows to accomodate quirks inbrowser rendering and to ensure that text is contained within thebackground of the text box */
    width: 230px;
    padding-left: 20px;
    padding-right: 40px;
.sidebar_textbox_footer {
    width:255px;
    height:64px;
background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Port rait%20Textbox%20Footer.png);
#issues_menu a:link {
    color: #151A96;
    text-decoration: none;
    font-weight:bold;
#issues_menu a:visited {
    color: #151A96;
    font-weight:bold;
    text-decoration: none;
#issues_menu a:hover {
    color: #F30A0A;
    font-weight:bold;
    font-style: oblique;
    text-decoration: none;
#issues_menu a:active {
    color: #151A96;
    font-weight:bold;
    text-decoration: none;
#archives {
    padding-top: 15px;
    padding-right: 15px;
    padding-bottom: 20px;
    padding-left: 0px;
.landscape_textbox {
    width: 500px;
    margin-right: 0px;
    margin-left: 30px;
    padding-top:35px;
    padding-bottom: 25px;
    font-style: normal;
    font-weight: normal;
.landscape_textbox_hdr {
    width:500px;
    height:38px;
    margin:auto;
    padding:0;
    background-image:
url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Landscape%20Textbox%2 0Header.png);
.landscape_textbox_middle {
    width:auto;
    margin:auto;
    padding-top: 12px;
    padding-bottom: 12px;
    background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/lan dscapte%20Textbox%20Middle.png);
    background-repeat:repeat-y;
.landscape_textbox_content {
    width:450px;
    padding:25px;
.landscape_textbox_ftr {
    width:500px;
    height:44px;
    margin:auto;
    padding:0;
    background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Lan dscape%20Textbox%20Footer.png);
#footer {
    padding: 0; /* this padding matches the left alignment of the elements in the divs that appear above it. */
    width: 960px;
    height: 222px;
    background-image:
    url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Website%20Footer%20_ 960.png);
    background-repeat:no-repeat;
#footer p {
   margin: 0px; /* zeroing the margins of the first element in the footerwill avoid the possibility of margin collapse - a space between divs */
    padding:0px; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
    text-align:center;
    margin-left: 50px;
    margin-right: 50px;
    padding: 10px;
    font-size: small;
#footer h5 {
text-align:center;
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
    float: right;
    margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page */
    float: left;
    margin-right: 8px;
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
    clear:both;
    height:0;
    font-size: 1px;
    line-height: 0px;
.dropcap {
    display: block;
    float: left;
    line-height: 80%;
    font-size: 250%;
    font-weight: bolder;
    color: #000066;
    padding: .03em .1em 0 0;
.red_arrows {
    list-style-position: outside;
    list-style-image: url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Arrow%20Large.png);
.blue_bullets {
    list-style-position: outside;
    list-style-image: url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Bullet%20Medium%20Fu ll.png);
.attention {
    color: #F30A0A;
    font-size:x-large;
    font-family: Georgia, "Times New Roman", Times, serif;
    font-style: italic;
    font-weight:900;
.attention_small {
    color: #F30A0A;
    font-size:large;
    font-family: Georgia, "Times New Roman", Times, serif;
    font-style: italic;
    font-weight:900;
.table {
    table-layout:fixed;
.blue {
    color: #00F;
#container .mainContent_left p .blue {
    color: #0303A0;

Hi Nancy:
The specific code that I am referring to is the CSS code governing the styling of the spry menu widget that only works in IE 6 if, and only if, it remains in the head of the web page. If removed and placed in a stylesheet, the IE plugins fail to compensate for the IE 6 "gap" bug. As I said, it doesn't make sense to me that, assuming specificity is addressed, that these can not be included in an external style sheet. I am looking for a) an explanation why they must remain embedded in the web page; and 2) any means by which I might be able to export them.
I will reproduce the specific css style (code) below: it should also be visable through reveal source --
Thanks again, Steve Webster.
The CSS governing the horizontal menu bar is as follows: (currently the following CSS is embedded in the head of the web page)
<style type="text/css">
/* -- Begins Spry Menu Widget 2.0 (1.0) Horizontal menu bar Custom styles -- */
/* BeginOAWidget_Instance_2141544: #MenuBar */
/* Settable values for skinning a Basic menu via presets. If presets are not sufficient, most skinning should be done in
   these rules, with the exception of the images used for down or rightpointing arrows, which are in the file SpryMenuBasic.css
     These assume the following widget classes for menu layout (set in a preset)
   .MenuBar - Applies to all menubars - default is horizontal bar, allsubmenus are vertical - 2nd level subs and beyond are pull-right.
    .MenuBarVertical - vertical main bar; all submenus are pull-right.
   You can also pass in extra classnames to set your desired top levelmenu bar layout. Normally, these are set by using a preset.
    They only apply to horizontal menu bars:
        MenuBarLeftShrink - The menu bar will be horizontally 'shrinkwrapped' to be just large enough to hold its items, and left aligned
        MenuBarRightShrink - Just like MenuBarLeftShrink, but right aligned
        MenuBarFixedLeft - Fixed at a specified width set in the rule '.MenuBarFixedLeft', and left aligned.
        MenuBarFixedCentered - - Fixed at a specified width set in the rule '.MenuBarFixedCentered',
                        and centered in its parent container.
        MenuBarFullwidth - Grows to fill its parent container width.
    In general, all rules specified in this file are prefixed by #MenuBar so they only apply to instances of the widget inserted along
   with the rules. This permits use of multiple MenuBarBasic widgets onthe same page with different layouts. Because of IE6 limitations,
    there are a few rules where this was not possible. Those rules are so noted in comments.
#MenuBar {
    background-color:transparent;
   font-family: Arial, Helvetica, sans-serif; /* Specify fonts on onMenuBar and subMenu MenuItemContainer, so MenuItemContainer,
                                                MenuItem, and MenuItemLabel
                                                at a given level all use same definition for ems.
                                                Note that this means the size is also inherited to child submenus,
                                                so use caution in using relative sizes other than
                                                100% on submenu fonts. */
    font-weight: normal;
    font-size: 17px;
    font-style: normal;
    padding:0;
/* Caution: because ID+class selectors do not work properly in IE6, but we want to restrict these rules to just this
widget instance, we have used string-concatenated classnames for our selectors for the layout type of the menubar
in this section. These have very low specificity, so be careful not to accidentally override them. */
.MenuBar br { /* using just a class so it has same specificity as the ".MenuBarFixedCentered br" rule bleow */
    display:none;
.MenuBarLeftShrink {
    float: left; /* shrink to content, as well as float the MenuBar */
    width: auto;
.MenuBarRightShrink {
    float: right; /* shrink to content, as well as float the MenuBar */
    width: auto;
.MenuBarFixedLeft {
    float: left;
    width: 80em;
.MenuBarFixedCentered {
    float: none;
    width: 80em;
    margin-left:auto;
    margin-right:auto;
.MenuBarFixedCentered br {
    clear:both;
    display:block;
.MenuBarFixedCentered .SubMenu br {
    display:none;
.MenuBarFullwidth {
    float: left;
    width: 100%;
/* Top level menubar items - these actually apply to all items, and get overridden for 1st or successive level submenus */
#MenuBar .MenuItemContainer {
    padding: 0px 0px 0px 0px;
    margin: 0;     /* Zero out margin on the item containers. The MenuItem is the active hover area.
                For most items, we have to do top or bottom padding or borders only on the MenuItem
                or a child so we keep the entire submenu tiled with items.
                Setting this to 0 avoids "dead spots" for hovering. */
#MenuBar .MenuItem {
    padding: 10px 10px 10px 4px;
    background-color:#000088;
    background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Nav igation%20Bar%20Segment-Dark.png);
    background-repeat:repeat-x;
#MenuBar .MenuItemFirst {
    border-style: none none none none;
#MenuBar .MenuItemLast {
    border-style: none none none none;
#MenuBar .MenuItem .MenuItemLabel{
    text-align:center;
    line-height:1.4em;
    color:#ffffff;
    background-color:transparent;
    padding: 0px 18px 0px 5px;
    width: 10em;
    width:auto;
.SpryIsIE6 #MenuBar .MenuItem .MenuItemLabel{
    width:1em; /* Equivalent to min-width in modern browsers */
/* First level submenu items */
#MenuBar .SubMenu .MenuItem {
    font-family: Arial, Helvetica, sans-serif;
    font-weight: bold;
    font-size: 15px;
    font-style: normal;
    background-color:#000088;
    padding:0px 2px 0px 0px;
    border-width:0px;
    border-color: #cccccc #cccccc #cccccc #cccccc;
    /* Border styles are overriden by first and last items */
    border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst {
    border-style: none;
    padding: 0px;
#MenuBar .SubMenu .MenuItemFirst .MenuItemLabel{
    padding-top: 0px;
#MenuBar .SubMenu .MenuItemLast {
    border-style: none none none none;
#MenuBar .SubMenu .MenuItemLast .MenuItemLabel{
    padding-bottom: 10px;
#MenuBar .SubMenu .MenuItem .MenuItemLabel{
    text-align:left;
    line-height:1em;
    background-color:transparent;
    color:#ffffff;
    padding: 10px 10px 10px 10px;
    width: 240px;
/* Hover states for containers, items and labels */
#MenuBar .MenuItemHover {
    background-color: #2E35A3;
    background-image:url(../ACLCO%20Graphics%20-%20Web%20site%20Parts/Nav igation%20Bar%20Segment%20Light2.png);
    background-repeat:repeat-x;
#MenuBar .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
    background-color: transparent; /* consider exposing this prop separately*/
    color: #ffffff;
#MenuBar .MenuItemHover .MenuItemLabel{
    background-color: transparent;
    color: #ffffff;
#MenuBar .SubMenu .MenuItemHover {
    background-color:#2E35A3;
#MenuBar .SubMenu .MenuItemHover .MenuItemLabel{
    background-color: transparent;
    color: #ffffff;
/* Submenu properties -- First level of submenus */
#MenuBar .SubMenuVisible {
    background-color: transparent;
   min-width:0%; /* This keeps the menu from being skinnier than theparent MenuItemContainer - nice to have but not available on ie6 */
    border-style: none none none none;
#MenuBar.MenuBar .SubMenuVisible {/* For Horizontal menubar only */
    top: 100%;    /* 100% is at the bottom of parent menuItemContainer */
    left:0px; /* 'left' may need tuning depending upon borders or padding applied to menubar MenuItemContainer or MenuItem,
                    and your personal taste.
                   0px will left align the dropdown with the content area of theMenuItemContainer. Assuming you keep the margins 0
                    on MenuItemContainer and MenuItem on the parent
                    menubar, making this equal the sum of the MenuItemContainer & MenuItem padding-left will align
                    the dropdown with the left of the menu item label.*/
    z-index:10;
#MenuBar.MenuBarVertical .SubMenuVisible {
    top: 0px;
    left:100%;
    min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse */
/* Submenu properties -- Second level submenu and beyond - these are visible descendents of .MenuLevel1 */
#MenuBar .MenuLevel1 .SubMenuVisible {
    background-color: transparent;
    min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse*/
    top: 0px;    /* If desired, you can move this down a smidge to separate top item''s submenu from menubar -
                that is really only needed for submenu on first item of MenuLevel1, or you can make it negative to make submenu more
                vertically 'centered' on its invoking item */
    left:100%; /* If you want to shift the submenu left to partially cover its invoking item, you can add a margin-left with a
                negative value to this rule. Alternatively, if you use fixed-width items, you can change this left value
                to use px or ems to get the offset you want. */
/* IE6 rules - you can delete these if you do not want to support IE6 */
/* A note about multiple classes in IE6.
* Some of the rules above use multiple class names on an element forselection, such as "hover" (MenuItemHover) and "has a subMenu"(MenuItemWithSubMenu),
* giving the selector '.MenuItemWithSubMenu.MenuItemHover'.
* Unfortunately IE6 does not support using mutiple classnames in aselector for an element. For a selector such as '.foo.bar.baz', IE6ignores
* all but the final classname (here, '.baz'), and sets thespecificity accordingly, counting just one of those classs assignificant. To get around this
* problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate compound classnames for IE6, such as 'MenuItemWithSubMenuHover'.
* Since there are a lotof these needed, the plugin does not generate the extra classes formodern browsers, and we use the CSS2 style mutltiple class
* syntax for that. Since IE6 both applies rules where
* it should not, and gets the specificity wrong too, we have to order rules carefully, so the rule misapplied in IE6 can be overridden.
* So, we put the multiple class rule first. IE6 will mistakenly apply this rule. We follow this with the single-class rule that it would
* mistakenly override, making sure the misinterpreted IE6 specificity is the same as the single-class selector, so the latter wins.
* We then create a copy of the multiple class rule, adding a '.SpryIsIE6' class as context, and making sure the specificity for
* the selector is high enough to beat the single-class rule in the "both classes match" case. We place the IE6 rule at the end of the
* css style block to make it easy to delete if you want to drop IE6 support.
* If you decide you do not need IE6 support, you can get rid of these,as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.jsscript.
* The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser isInternet Explorer 6. This avoids the necessity of IE conditionalcomments for these rules.
.SpryIsIE6 #MenuBar .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
    background-color: transparent; /* consider exposing this prop separately*/
    color: #ffffff;
.SpryIsIE6 #MenuBar .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
    background-color: transparent; /* consider exposing this prop separately*/
    color: #ffffff;
.SpryIsIE6 #MenuBar .SubMenu .SubMenu /* IE6 selector */{
    margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
/* EndOAWidget_Instance_2141544 */
/* Ends Spry Menu Bar Widget 2.0 (1.0) Horizontal Menu Custom styles */
</style>

Follow up to recent posts regarding rendering problems

I've read all posts to Berrett below but can't seem to get my "Flip Video" camcorder (uses MPEG-4AVI) video into FCE without the rendering problem. I've tried to convert in two ways. Using MPEG Streamclip I transferred my video to my desktop using the "export to DV" command. It appears on desktop with a .DV suffix I then imported into browser. After editing in the viewer and trying to insert edit in canvas I get the message " "..clip does not match sequence settings..." I then click yes to change sequence settings and the clip moves to timeline. The video plays but the audio has to be rendered.
Next, I tried converting using the export to quicktime command in Streamclip with sound uncompressed and setting to DV-NTSC. When I insert into FCE and insert edit I get the sound but the picture has to be rendered. What am I doing wrong?
I've been working on this all day and am getting very depressed. Please help. Thanks.
Ed
S

Thanks but I think I tried that without success. I must have a setting somewhere wrong. My audio is fine but I still have to render my video. Using Streamclip to convert to quicktime here are the setting I used in the Movie Exporter dialog box.
Compression: Apple Motion JPEG A
Sound: uncompressed
frame size 720x480 (DV-NTSC)
In FCE my easy setup is
Format: NTSC
Use: DV-NTSC
Help.

Since numbers 3.1 rendering problem in output

Since I upgraded to Numbers 3.1 all printed output is no more crispy, it looks like a rendering problem. My Number documents consist of normal text elements and tables, sometimes some charts. Scaling on printout is not activated. On the Mac display the problem does not exist, everything seems to be fine, also in large zoom factors. But printing the document produces some kind of unrendered, pixely output, comparable to a screenshot, by far not that crisp as in Numbers 3.0.1. Other applications such as Pages, Word, Excel are not affected, printouts are fine.
What I did so far:
- uninstall and reinstall numbers
- changing, reinstalling the printer driver (HP Color LaserJet 2025 Series), I use the Postscript driver
- converting the Number documents to Numbers '09 and opening them again
- playing and testing with numerous zoom factors
- changing fonts in the Numbers document
... all without any success.
What helped me was:
- Installing Numbers 3.0.1 again using TimeMachine, installed it parallel to Numbers 3.1
- In Numbers 3.1 exporting the Numbers document to Numbers '09
- Opening that document in Numbers 3.0.1
- Printing the document in Numbers 3.0.1 --> Output ist fine and perfect.
It seems to be a rendering problem, only in Numbers 3.0.1. The problem appears in all existing and new Numbers documents on Numbers 3.1.
Here is my infrastructure:
MacBook Air Mid 2013, OS X Mavericks 10.9.1
Numbers 3.1 (1769)
HP Color LaserJet CP2025dn using PostScript
Many thanks for your help!
speckch

Perhaps you can see the problem in this version. This is a PRINTING problem. You cannot see it on screen in the pdf.
This is a single Numbers document, printed directly from Numbers (3.1). The font is identical in both lines. The box color is identical (black) and the width of the line is identical (0.5 pt). It was printed on an HP Color LaserJet CP2025.
The upper text is jagged. It may look fine on your screen, but it's not.
This is very obvious if you look at the larger image that is linked to the image above. (Remember, a computer screen is only 72 dpi and this image is optimized for that. Printed text is much higher resolution. So, to get an accurate view on your screen of how jagged the text is when printed, you need to look at it magnified. Right-click on the image above to open the image in a new tab, and you should get the full size.)
Also, the because the upper image is lower resolution (jaggies), the narrow line cannot print accurately. Thus, it appears blueish. When you look at the full-size image, you can see how jagged the line is and the mix of dots (red and blue, predominantly) that was output by the printer. In contrast, the lower text box is smooth and black.
I don't know where the problem lies, but I have not experienced anything like this on any other program I currently use. It's a postscript printer, and I suspect that something's gone wrong in the postscript output associated with tables and the printer is printing the screen view, not the higher resolution printer data. But that's just a guess. And as far as I know, it's not something anyone other than Apple can fix.
And, of course, since you can't see this problem on screen in the pdf, no matter how much you "zoom" in, you won't know if your files will print badly until you test it. Or, worse, your client does.
Bummer.

Rendering Problem in FCP 6.01: throws footage out of synch

Similar Messages

Maybe you are looking for