Rendering problem with AVC-HD in AECS4

Hi all ,
i have a problem with rendering AVC-HD footage with all resolutions.
when i render the result is jumpy footage .
i tested with P2 files and i dont get the jumpy footage , only with AVC-HD .
any idea why ?
my computer :
cpu - I7 920
motherboard - asus p6t .
memory - 12GB .
OS - vista 64 bit .
10x

AltiumMan wrote:
This is a bit of a pain and I don't know how it'll work if you ever have a circular reference - i.e. a Premiere Project links to AE which in turn links to Premiere. I don't know how the media encoder will cope with that.
Circular references are not supported currently, so you need to structure your workflow accordingly. This is however a popular request, so chances are good it will come in one of the next versions.
AltiumMan wrote:
2) For some reason, rendering out of an AE comp that dynamically links to a Premiere project with an MTS file in it is _much_ faster than rendering an AE comp that directly references the MTS file. On the footage I tested it with, a 30 second MTS file was suggesting 1 hour 30 minutes to render when AE reads the MTS file directly, but less than 9 minutes when using the dynamic linking. Go figure?!?
Premiere can handle suchg streams without conforming them,i.e. it does not need to decompress frames and blow them up to full RGB. And of course, being aimed at RT playback, it surely is even more optimized.
AltiumMan wrote:
3) The Media Encoder that is now used by Premiere can render out to FLV using a 2 pass encoding but rendering out of AE only offers 1 pass. I don't know why this limitation would exist? Usually the two pass encoder is much better but I don't understand why it would be available in Media Encoder but not AE.
AE does not support temporal compression natively. The various media format savers try to circumvent that, but neither of them can hold an entire composition timeline in memory or temporarily store the result of the first analysis on disk, which is what would be required for 2-pass VBR. One of these days, maybe...
Mylenium

Similar Messages

RAW file rendering problems with Pentax-k5

Since a few weeks I have serious problems with the raw rendering in aperture 3.4. I have done everything to solve this problem, but until now without succes. I have upgrade with mountain lion OS X 10.8.2 and I use the latest version of aperture 3.4.3 RAW 402 build 672.6.
Does anyone have this problem to? Or do you know how to solve this problem?
Regards
Jan K.

Jan,
that may be the same problem as discussed in this thread. Do you use in-camera settings to enhance your pictures? these will not be captured in the raw processing that Aperture does, but the pentax software understands the in-camera settings:
Image Previews In Aperture 3 - Canon 5D MK2
Regards
Léonie

Raw file rendering problems with Canon EOS 5D in Aperture 3

Since upgrading to Aperture 3, I have had serious problems with the rendering of Canon EOS 5D (not Mark II/III) RAW files. With Aperture 2, both the preview and full-sized images looked basically the same as the original images as displayed on the camera's display, without any adjustments.
With Aperture 3, each preview images initially look fine after import, but when Aperture re-renders it from the RAW file (e.g. when displaying the full-size image), the colors are drastically intensified, and the hue is shifted generally towards green/blue. I've checked the RAW Fine Tuning, and it is set to the defaults. If I turn the default RAW Fine Tuning settings all the way down, the image is still not at all like the preview from the camera - it becomes much darker and stays too blue/green, with washed-out colors.
A friend with a Canon EOS 5D MkII also recently upgraded her Mac from Aperture 2 to 3, and hasn't experienced any problems. We've tried importing RAW files from my (non-MkII) camera to her Mac (with the default RAW Fine Tuning settings), and get the same results as with my own Mac (i.e. strange colors), so the problem seems to be related to the camera model.
I've also noticed that scanned greyscale tiff images (including images that were originally imported under Aperture 2) are changed when first displayed by Aperture 3 - they become darker and more contrasty, with lots of information lost in the shadow areas.
I've also tried removing Aperture preferences, Aperture itself, and re-installing from download, with no change in the problem. (Aperture is the current latest version, 3.3.2.)
Has anyone experienced similar problems?

I'm having the same problem.
iMac running Mac OS X Lion 10.7.4 and Aperture 3.3.2. Workflow is importing through Canon's DPP and then using referenced images in Aperture. The images look great in LR4, or Canon's DPP but are flat and dingy in Aperture.
There's a free preset that goes part way to fixing it at http://theapertureblog.com/2011/02/10/my-aperture-workflow-for-working-with-cano n-5d-mark-ii-files/
but as good as this fix is, it doesn't quite do the trick. [not being a hater, and not saying I can do better]
I just got back from shoooting 1,500 images with a 5DMii and a T2i using Canon 24-105L IS, 70-200 2.8L, 50 1.8 and a Sigma 120-400 and the T2i images are not just better, they're in a different league.
I've tried shooting in Faithful, Neutral and also toggling these presets in different ways and still can't get Aperture to match what I see on the camera's screen or in other Apps. I love the interface and DB of Aperture, but what's the point of using it if it doesn't produce and awesome image in the end?

WLP10.2 rendering problem with FF3.5.3

Hi,
We are building a portal using the WLP10.2. We are facing problems with FF3.5.3. It doesnt render the page immediately. On refreshing the page for 5-6 times we get to see the page rendering. We have even tried debugging the issue by installing firebug. In firebugs console it shows the files being loaded. It loads till the .../framework/scripts/bea/wlp/context/Other.js and stops loading the page from there. After clearing the browser cache and refreshing 5-6 times, the site than loads up. By the way we are even using jQuery to render certain UI like tabs, accordian being used in the page.
Anyone, if you have encountered such a problem. Please let me know what was the workaround you people tried.
Regards,
Subrahmanyam.D

Are you using the DVT (dynamic visitor tools)? Is this a production mode or development mode deployment? I assume that DISC is enabled because you watched DISC modules loading.
Is there an error message in the firebug console?
I saw something that may be similar: the DVT would stop during some of its initialization code. It is client-side code that was calling some dojo module initialization code.

Rendering problem with Internet Explorer

Hi all,
i have a BSP with MVC, HTMLB and Design2003.
The table rendering in the IE requires 15sec.
With Firefox the rendering requires only 1sec.
The table has 100rows and Buttons in it.
has anyone an idea what's the problem with the IE-rendering?
greetings,
Markus

Hi,
- the IE Version is 6.0 SP2 on WinXP
- before and after the table are some buttons only.
- i use no htmlb:gridlayout or phtmlb:matrix
- the table is realized with <htmlb:tableView>
in IE, I see that the response is finish but the IE displays for maybe 15sec. a grey screen and after that time I see my page. In Firefox I see my page immediately!
greetings,
markus

Rendering problems with bulleted slides

I am having a problem with the latest version of Keynote 3.
When I create a slide with one field with a bulletted list, and choose the "word pop" effect on the field, the bullets are randomly disappearing and won't appear on the slide.
If I turn off the build effect, the bullets appear as they should.
Has anyone else encountered this?
I love the build effects in Keynote, and this is driving me crazy!

I am having a problem with the latest version of Keynote 3.
When I create a slide with one field with a bulletted list, and choose the "word pop" effect on the field, the bullets are randomly disappearing and won't appear on the slide.
If I turn off the build effect, the bullets appear as they should.
Has anyone else encountered this?
I love the build effects in Keynote, and this is driving me crazy!

Premiere CC to AME - H.264 nightmare rendering problems with CUDA on rMBP

I've been struggling for weeks trying to troubleshoot and narrow down my encoding nightmare on my own and I have finally succumbed to getting the forum's or Adobe's Help.
Problem:
Rendering a Premiere Pro CC project with via Export Media > Queue to AME in H.264 causes the encode to randomly fail on multiple projects.
I find it quite amazing that this error happens as I surely am not the only one rendering ProRes to H.264 on a new Macbook Pro!
Symptom:
Output preview starts to flicker then encoding stops randomly, preview window turns to a black screen or simply stalls while the Elapsed Time keeps rolling, PProheadless crashes in Console, encoding sometimes resumes after several minutes post the crash (but sometimes not) however the final output in such case is garbled before/after the crash. Computer is useable. All other software shutdown. Not using computer during encode. Can reproduce virtually every time.
Hardware:
Early 2013 Retina Macbook Pro
Processor 2.8 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Software:
Premiere 7.0.1 (105)
Adobe Media Encoder 7.0.1.58 (64bit)
Creative Cloud Latest Updates
Cuda 5.5.25 (latest)
GPU Driver: 8.12.47 310.40.00.05f01
OS X 10.8.4 (latest)
Project Details:
ProRes 4:2:2 or AVCHD sources
No nested sequences
Video track with image over whole sequence
Video track with text over whole sequence
Video track
Audio track
Sometimes video track with adjustment layer
Standard disolve effects between cuts
4 effects used: denoiser for audio, luma corrector and twice Fast Color Corrector
No third party plugins installed nor used
Sequence is set to Maximum Bit Depth / Max Render Quality / Linear Color
Use Previews off
Encode is set to Maximum Render Quality and always H.264 2pass VBR.
Errors in console:
8/27/13 12:38:01.144 AM PProHeadless[1389]: [CL_INVALID_OPERATION] : OpenCL Error : Failed to retrieve device information! Invalid enumerated value!
This is seen at multiple times while starting Premiere (no crash) and while starting the encodes and usually after/during the crash.
Crash report:
Process:         PProHeadless [410]
Path:            /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro CC.app/Contents/PProHeadless.app/Contents/MacOS/PProHeadless
Identifier:      PProHeadless
Version:         7.0.1 (7.0.1.105)
Code Type:       X86-64 (Native)
Parent Process: dynamiclinkmanager [397]
User ID:         501
Date/Time:       2013-08-26 21:12:21.878 +0200
OS Version:      Mac OS X 10.8.4 (12E55)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGSEGV)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Full Crash report:
http://pastebin.com/a93cNVqk
Attempts to solve the issue:
Tried encoding without external montior
Tried encoding with source on internal HDD, output internal HDD, source exterbak RAID, output internal HDD
Tried encoding with AME while Premiere is open in the background and without it opened in the background
Uninstalled other software that could mess with the graphics: Colormunki, Parallels.
Software mode is fine on all attempts in AME however encoding takes 2-3x longer. On a $3000 laptop it's not really great.
Encoding directly via Export Media > Export without Queuing to Adobe Media Encoder seems to work fine. I have not tried this too many times because I need to render multiple outputs and doing it without AME means a lot of 'sitting and waiting' to click Export for the next format. This is not an option.
Tried deleting the Media Cache
Completely reinstalled OS X 10.8.4 from scratch with no other software running and tried to export. Same problem.
Performed Apple hardward test. No problems.
To Test:
I'm planning on installing Bootcamp so I can test the problem in the Windows version and I could pinpoint it to a hardware problem rather than a software problem.
Notes:
Problem happens with CUDA and Open CL modes although in Open CL mode, the whole computer tends to freeze intead of just 'stalling'.
Editing and playback inside Premiere is OK! Even encoding out of Premiere is OK directly but not useful for me as I need to render each project to 5 different H.264 formats.
I hope you guys or Adobe's Support can find a solution to this problem because I'm really stuck between a rock and a hard place.
I've submitted a bug report but their reply is not very comforting:
but their bug report says "Due to the volume of submissions we receive, responses to inquiries are generally not possible. However, we may contact you if we need clarification on your submission." Nice.

Yes I considered your "solution" of just upgrading to Adobe CC but on principal I don't want to have to shell out more money to "fix" the problem. I was able to get an Adobe technician to view my screen in real time. He asked me where Prem Pro was after I opened it and my response was "precisely". The only evidence that Prem Pro is open is that there is the taskbar there with what appears to be fully functional drop down tabs but as far as the panels/workspace goes non-existent! He has "escalated" the matter I'll let you know what occurs next. I have tried using the software mode and there is no change. Like you I have wondered about a hardware proplem but I have checked via Disk Utility and there doesn't appear to be any? The CUDA issue well a) I am not sure how I would revert to previous drivers and b) when I re-installed Prem Pro from disc (that's version 6.0.0.) the only render option it gave me was Software only but that was also greyed out. Prem Pro still did not open up as it should!
I'll let you know what transpires.

Rendering problems with a motion project

Hi there,
can anyone help?
I have a fairly simple motion graphic which i am trying to use in an FCP edit. The Motion project is some moving text with a simple background. The project renders fine in RAM in Motion.
The problem is that when I try and render this in FCP, the background becomes very distorted-the graphics are fine but the background isn't.
Is there anything I can do to rectify this? Any settings etc?
Any help would be very gratefully received!
thanks

You need to give the exact specifications of your Motion project and of the media in your FCP sequence and of the sequence in which the clips and the Motion project are being assembled.

Catastrophic Rendering Problem with PDF's on iMac, iPad, iPhone and iBooks

Hi,
i would like to hear from anybody who has had the same experience.
A customer sent me an order per email with an attached PDF order. We use apple mail for all incoming emails on an iMac.
Both in apple mail when viewing the attachment (no need to open it) and in the previewer using quick look and also having saved the attachment and opened it directly with previewer all seemed OK.
We delivered the product as requested but received a complaint because the client claimed that we had overlooked certain details in the order. This caused a considerable amount of disagreement because both parties felt they were right.
To make sure the documentation was complete we saved the attachment on our vmware- windows XP machine in our client data folders. We later opened the attachment on the windows machine which uses adobe reader and not apple previewer.
Lo and behold - all the details which the client said were contained were now visible.
Further investigation showed that any data which the client had printed/generated in bold font were not being displayed on the mac.
Unbelievable, so we forwarded the mail to a sevaral colleagues for double checking.
They all confirmed our findings. Apple mail and previewer do not display the same data as when using adobe reader.
Even worse: neither do the email displayer on ipad or iphone conform to what is displayed by the original. Even saving the docoment to iBooks does not help.
Our only guess is that the client who sent the PDF is probably using a non-adobe pdf creator which happens to work if you use adobe reader to display it but probably does not conform to the spec which others, such as apple, use when displaying. Maybe abobe reader is just more error tolerant.
I have sent feedback to apple but hardly think they will crash update all their products.
As it happened this caused an argument about a few euros. I hate to think what it could cause though.
-Paul-

While not common, what you describe is no unusual either. I can tell you that the person who created the PDF almost certainly used Adobe's products. It is Adobe that is not compatible with all of the other PDF implementations. I encourage you to submit a bug report to Apple and include a copy of the PDF. There was a "bug" in Apple's PDF rendering software in version 10.6.7 for which Apple released a fix fairly quickly. I say "bug" in quotes because the PDF was perfectly valid according to all published standards. All PDF viewing programs on either Mac or Windows could read the PDF - except Adobe.
Ultimately, PDF is a print technology and will fall by the technology wayside pretty soon.

Portal Collection List Renderer - problem with alignment

Dear All,
I'm having an issue with alignment of columns when changing a Layoutset.
This modification is all done with SAP standard components, so I decided to try my luck here first at SDN before writing an OSS message.
Here's what is happening:
I want to have the KM files listed like this:
(as I can't put a printscreen, I will put it on text for you to have an idea)
FILENAME..................MODIFIED...........................MODIFIEDBY
...file1..........................xx/xx/xxxx..........................aaaaaaaa
Description of file1 here....
file2.............................xx/xx/xxxx..........................aaaaaaaa
Description of file2 here....
file3.............................xx/xx/xxxx..........................aaaaaaaa
Description of file3 here....
To obtain this I'm changing the standard object AdminCollectionListRenderer
I do this by going to KM configuration and change this SAP standar object on
Collection List Renderer Settings > AdminCollectionListRenderer
    Flavor:
      From: List
      To: Not Set
    Displayed Properties:
      From: rnd:icon,rnd:displayname(contentLink)+rnd:action,contentlength,rnd:lock,modified,modifiedby
      To: rnd:displayname(contentLink),rnd:lock,modified,modifiedby,rnd:description(\[2;1-1\]/noTitle/maxChars=300)
The result is ok, but there's a very small detail that doesn't disappear no matter what I do.
If you go to the txt above, the "file1" is ALWAYS one blank space to the right. It's not aligned with the
other items on the list.
Has anyone experienced this ?
Is there any solution ?
Kindest Regards
/Ricardo Quintas

Check in your type preferences. Apply leading to entire paragraphs will fix this. It's likely that the return at the end of your last line has a larger point size assigned to it, and it's throwing your leading off.

Rendering problem with Publishing HTML field

All,
I am running into an issue with a publishing HTML field. I have added this field to a content type. On a page layout which uses this content type, I have this field only in an edit mode panel. This field is not intended to be rendered on the page. However,
if I use an HTML form web part in this field, the field is actually rendered on the page. It is rendered with a <div style='display:none'>. I need to use an HTML form web part because I don't want the markup I am entering to be altered. Is there any
way I can avoid this and not have it rendered since it is only contained within an edit mode panel?
Thanks

click file/publish settings/formats, make sure the swf and html boxes are selected, and click the use default names button. then click file/publish. are the files in your directory with your fla?
if not, create a new directory (that has no subdirectories), save your fla to that new directory using a new name (ie, click file/save as). then click file/publish. check the new directory for your 3 files.

Have you experienced rendering problems with Adobe Web Fonts?

Used PT Sans for body text and PT Sans Bold for headings. The Bold font displays properly on iMac and iPad, but the letter spacing is shot when viewed on Android 4.0.4 (Samsung Galaxy SII). I checked that I hadn't emboldend the characters, and when I changed the font to Hammersmith it displayed correctly on all three devices.
Not many font families in Adobe Web Fonts, where ther is a Regular, Bold, Italic and Bold Italic.
Has anyone experienced similar problems`/

Hi Zak
I've sent the URL and details of a possible cause of the problem.
The most affected page has small thumbnail images pasted into the text. I
set it up this way because although they were aligned outside of the text
but ranged with the headings, when viewed in the browser they had dropped
and lost their position. Pasting inside the text box and using text wrap
seemed the best solution. The font Hammersmith isn't affected, only PT Sans
Bold.
Unfortunately, Muse doesn't use multiple columns, which allow text flow.
Kind regards,
Jerry

Problem with AVC

Dear Gurus,
The user has created several orders in the back date and wanted to confirm the stocks in all the orders.We have tried with V_V2 and the problem is that the system is confirming the order but at the time of delivery system is confirming half of the delivery.
Eg: Created and order for 50 pieces on the 1st of the month and confirming the order a month later system is confirming the stocks but when the delivery is done system is confirming only either half the stocks or less than that.
Unable to understand why the system is behaving like this.Can anyone help in this regard?
Thanks in advance,
Ramesh.

please elaborate what is a DA?
Delivery document.
but at the time of delivery, system is not showing the confirmed quantity.
What availability check is maintained for those materials (KP, 01, 02)
G. Lakshmipathi

Rendering problems with Cineform files Premiere Pro CS6 Mac

Using CS6 Premiere Pro (latest updates) on MAC OS X 10.8.2 with Cineform stereoskopic files. Generally all looks good. Preview is working smoothly. When rendering (H264 Blu ray, MP2 DVD, Quicktime.. does not seem to matter) slowly the number of threads is increasing while rendering and when there are about 2050 threads or so then rendering just halts, CPU load going down, progress stops, rendering never finishes. Anybody having an idea what could be the issue?! Thanks

Okay how should I be exporting the files to use in premiere then? I exported a couple that were just a minute long and they ended up being 2 gb...

Safari 5.1.7 and OSX 10.6.8 (Snow Leopard) - Text rendering problem with Zoom

After updating to Safari 5.1.7, all of my web pages do not render properly when I use zoom feature of OSX 10.6.8. I am nearsighted, and like to increase the size of web pages. Until this update, Safari was fine--zoom, and the page zooms properly (e.g., text fits in address bar, pictures/text are not cut off, etc.). After this update, Safari opens up text in smaller font, running in a narrow line down the page, and doesn't use the full screen, as does Firefox for example. I like Safari, and would like to remedy this. Any suggestions?

I fixed this by unchecking "Zoom Text Only" in Safari > View menu.

Rendering problem with AVC-HD in AECS4

Similar Messages

Maybe you are looking for