Rendering SD Jump Backs

I'm trying to render Digital Juice (SD) jumpback files on my new MacBook Pro. The previews all play OK but I get error messages when I try to render a file!

Hi(Bonjour)!
Welcome to the forum.
Do you use an external hard drive for capture scratch/rendering ? How this drive is formatted? It should be Mac OS extended, not FAT 32.
Michel Boissonneault

Similar Messages

After Update Bizarre jump back to Finder Behavior

I have always dutifully used Software Update to stay on top of things.
In some cases it has revealed problems. What a surprise.
The most recent update to 10.4.5, or the latest Security update has introduced an annoying behavior that doesnt make much sense and I wonder if anybody else has encountered it.
If I have multiple windows open (Safari, Mail, iPhoto...) after less than 30 secs. the user interface always jumps back to the Finder, no matter what I am doing. As I type this if I hesitate for more than a few seconds the keyboard wont respond because I am in the Finder again...GRRRR...irritating behavior. You then have to click on the window (Safari whatever it was you were doing) to then continue scrolling, typing whatever.
Anybody else? No its not Screen saver activating its like 15-30 sec delay and Bam back to the Finder.
I have reported this to AppleCare (mine just expired) and the case number is 60078651...the squeaky wheel gets greased if you experience the same issue use this case number to complain en masse.

Hi, f/64.
1. Well, you can delete the Finder preferences (see also my "Finder Issues? How to delete its preferences" FAQ) as macjack suggests, but I don't think that's the issue.
2. It sounds like some application or background process is actually switching the focus to Finder. Since this seems to have arisen after recent updates, this makes me suspect a Startup or Login Item that has been rendered incompatible by the update. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
3. A good way to avoid such problems with updates is to follow the advice in my "Installing Software Updates" FAQ.
4. You've not provided any information concerning your Mac itself: model, RAM, if you are using a third-party keyboard or mouse (brands of each), etc. so more details about your system would be helpful.
5. A couple of "off the wall" ideas:
• An errant folder action script. If you've not enabled any of these, don't worry about that.
• Some people have experimented with installing FrontRow on Macs which did not come equipped with such via a variety of hacks posted on the Internet. This has caused some problems, including the loss of all menu extras, the icons on the right side of the menu bar, and repeated crashes of SystemUIServer, which controls menu extras.
6. After the problem occurs, you may want to check Console for clues.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I can only go back one page at a time because the drop-down jump back multiple pages feature is missing; how do I get this feature back?

On Firefox 3.6 the back and forward buttons also had a drop-down menu to enable me to jump back to one of the last, say, 10 pages I had viewed rather than only go back one at a time. Also, the reload button appears to be missing and I can't figure out how to bring these back. Otherwise, an awesome upgrade; thanks for all your hard work on this fantastic product.

You can right-click either Back or Forward button to open the tab history list.

With version 4 why can't I go back more than one page at a time. Used to be able to jump back with older version.

I don't want to refresh - I want to be able to jump back several pages - i.e..on one site - link took me to another site - done with that one - want to go back quickly to the original site..?

The dropmarker (down-arrow) has been removed from the Back/Forward button in Firefox 4. You can do one of the following:
*right-click the Back/Forward button to show the drop-down list of history/sites for the tab
*while on the Back/Forward button, left-click and HOLD until the drop-down list appears
*install this extension to add the drop-marker Back/Forward button: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.2.2
*Shockwave Flash 10.1 r82
*Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

Sometimes I cannot select an airport express to output sound from a current model mac air/10.9.3. The output jumps back to internal speakers or apple tv. Any ideas?

Sometimes I cannot select an airport express to output sound from a current model mac air/10.9.3. The output jumps back to internal speakers or apple tv. Any ideas?

Hello Cloud19,
The article linked below provides some helpful information and troubleshooting that can help resolve issues with AirPlay and your Airport Express.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it

When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
I have been playing whole movies before from VLC without problems.
Any Ideas?

Welcome to the Apple Community.
Yes it's network issues or settings that cause these types of problems most of the time.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Is it better to use just one project or to jump back and forth?

Greetings,
I am using Captivate 4. And I am wondering if it is better to use just one project or to jump back and forth?
I have one main project and rather than make one big project, I wondered about jumping off to small projects and returning to the main one.
I was trying to figure out the suggestion of jumping back to slide 10 and jump off to another project and then back to slide 20.
Do the projects have to be published to see this work?
I am just learning about Captivate so I am unsure of the best practices.
Thanks.

It's not that easy in Captivate projects to jump to a particular slide midway through another project. Captivate is set up by default to just launch each project from the first slide.
There have been workarounds published on this forum that allowed jumping into the middle of another project, but they can require some complex coding in either JavaScript or ActionScript.

Double-click on a page causes Firefox to jump back a page instead of highlighting at the insertion point

I have a Logitech iFeel MouseMan. The side button is set up for double-click. Sometimes instead of highlighting at the cursor position the tab jumps back one page. (That is, it acts as if I had clicked the back button at the left of the address bar.) This anomalous behavior does not happen if I physically double-click with the mouse's left button. This anomaly happened about a year ago and a Google search turned up a Firefox configuration setting that fixed the problem. Now I can't find that setting and a Google search provides no answers. I solved the problem by resetting my computer to an earlier reset point, but that is an inelegant solution -- and it takes hours. (The problem is not happening now. I ask for the future.) I would prefer to make the problem go away by changing the appropriate Firefox setting. Logitech told me that the problem is not with the mouse nor its software, but with Firefox and that I should ask Firefox experts.

Thanks for your response.
I guess I didn't revert to as far back as the change I had made because when I follow your instructions, no entries are bold.
Or did you perhaps mean the next time the problem occurs I should look for a bold entry? And then change it back to what it was? (All that I recall from a year ago was that I changed one entry from ''true'' to ''false'', or vice versa.)

In IE 8 there is a "recent pages" tab next the forward / back buttons. It helps us jump back & forth the sites. Is there similar feature in FF 6 ?

In IE 8 there is a "recent pages" tab next the forward / back buttons. It helps us jump back & forth the sites directly. Is there a similar feature in FF 6 ?

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

Help with actionscript to make page jump back to top

Ok so I wanted the page to jump back to the top when the
buttons are pressed. I found some help in an old thread. It worked
great but for the first button only that i put the script on. All
the others don't work at all. Even if its the same button just on a
different frame. Not sure what i am doing wrong at all. I really
don't know anything about actionscript so if anyone can please help
me. Below is the script that i added to the tree buttons and the
script i added to the html code.
thanks- joe
Button1:
on (release) {
nextFrame();
import flash.external.*;
flash.external.ExternalInterface.call('pageTop');
Button2:
on (release) {
gotoAndStop(1);
import flash.external.*;
flash.external.ExternalInterface.call('pageTop');
Button 3:
on (release) {
prevFrame();
import flash.external.*;
flash.external.ExternalInterface.call('pageTop');
At the top of my html:
<head>
<script http-equiv="Content-Script-Type"
content="text/javascript">
function pageTop() {
window.scrollTo(0,0);
</script>

you don't need all the import statements but the problems are
likely caused by your buttons failure to exist when the timeline
goes to the frame indicated in the line above the externalinterface
call().

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

Art,
I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of 'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
I hope someone will be able to confirm how that can happen...
Edit;
I have just read Brian's post.
That may be the difference...

Why when I ge, I would have come, but I ran near home since the group run was cancAwe, I would have come, but I ran near home since the group run was cancelled.elled. to a site my iPad jump back to the home page

MY iPad jump back to the home page every time I'm on a site

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

My iphoto keeps jumping back to last import

My iphoto keeps jumping back to last import, I am using photo's in a event and if I click on anything on my desk top it flips out fo the event I am in and jumps back to last import please help

Close iPhoto and open the iPhoto Library package as shown in this screenshot:
Look inside the Auto Import folder and move whatever you find to the Desktop. Do not many any other changes.
Launch iPhoto and it should not jump back to the last import smart album. If there are any image files that you moved to the Desktop that you want and are not in the library then reimport them.

Trying to jump back to a previous slide if a question is missed

This is just the first of many questions I'm gonig to have, but the one that's bugging me the most right now.
I'm running Captivate 6 (32 bit) and I am trying to have a sort of review section after each portion of my training video. What I want is for the person answering the questions in the review section to have three chances to answer the question. If they get it wrong 4 times, I want the project to jump back to the slide the information they didn't retain was on. I would also like to make it to where, on second viewing of this slide, they can return to the quiz question. I'm assuming this would require making a new, hidden slide?
Thank you anyone for your help. I'm going on a five day vacation in about 15 minutes, so I may not check on this right away, but please know that finally getting this to work is going to absolutely make what is sure to be a miserable Monday . Happy holidays for those in the states!

Hi ,
What I can understand that you have following project model.
Content Slide section A
Content Slide section A
Content Slide section A
Content Slide section B
Content Slide section B
Content Slide section C
Content Slide section C
Quiz Section A - 3 attempts
Quiz Section B - 3 attempts
Quiz Section c- 3 attempts
on first time you want normal flow mentioned above and if suppose user has failed quiz section A , he/she should go to Content section A and then directly jump to quiz section A rather than going to other section.
To achieve this define a user variable a, assign default value =0, now on the last content slide of particular section you have to set on exit action -> execute conditional advance action
if a=0 then continue else 'Return to Quiz'
now on quiz section A you have to set success failure actions:
Success -> Assisn a = 0;
Failure-> Execute advance action ( Assign a=1 and Jump to respective content slide.)
Please let me know if this helps.
Regards,
Avinash

Rendering SD Jump Backs

Similar Messages

Maybe you are looking for