Rendering: Settings Changed

I don't remember ever seeing this message before, but since I've upgrade to LR 1.4.1 I keep seeing the message "Rendering: Settings Changed" the first time I view an image in "Fit". Also when I zoom to 1:1, I get the message "Rendering: Higher Quality", which I also don't recall seeing before. I've tried rerendering previews both standard size and 1:1, but it doesn't seem to have any effect. Does anyone know what these message mean, and I why I am getting them now? It definitely slows down my rating workflow.
It also seems curious that after I did Discard 1:1 Previews (it claimed it was discarding several hundred of them), when I did Render 1:1 Previews: it claimed to only need to create 30 of them. Shouldn't it need to render all the previews that is discarded?

>It also seems curious that after I did Discard 1:1 Previews (it claimed it was discarding several hundred of them), when I did Render 1:1 Previews: it claimed to only need to create 30 of them. Shouldn't it need to render all the previews that is discarded?
It will only render previews for the photos that you have selected.

Similar Messages

"Rendering: settings changed" after saving changes from Bridge

I have LR 2.6 on my Mac. I import RAW images through LR, let LR build 1:1 previews. Once the import has finished & previews are built, LR moves from image to image fine. I then do my basic edits, deletions, and do a batch renumber.
Next I go to Bridge to make my adjustments in the RAW window without opening the files. I go back to LR, save the changes, allowing the Bridge changes to overwrite the LR development import presets in the xmp files.
It usually takes LR a while to save all the changes, but eventually it does it. However, here is my issue. No matter how much time I give LR to render new previews, I don't think it does, at least not until I go to Library mode double click an image to view larger (to fit the window). When I go from image to image, it takes a few seconds while displaying the message "Rendering: settings changed..." Now, this is not necessarily right after I save the changes, but it still happens weeks later- whenever I go to view those images. Does LR not automatically re-render the previews after development changes have been made and saved to LR?
And if not, how would I force LR to do it for that catalog, or for all my images?
Thanks,
R

Robert Ripps wrote:
A fair question- one, when I have tried, LR is way slower on my Mac G5 than doing it in Bridge, which is slow itself. I just launched LR, had an open folder with 303 images in it which I had already rendered previews of, then clicked on Develop module- it took 13 seconds to go to that module & finish "loading". Yes, a new commuter would solve many problems <g>, but until then....
What you may need is more RAM. Or do you have other applications working in the background 13 seconds to build a preview!!!!! Using a old Macbook with 1.2 GB RAM an it does it faster than that!LR doesn't require a lot of power from a machine...it does need as much RAM as you can stick in a machine and the fastest disks you can use...but if it is taking 13 seconds to build a single preview then it isn't really worth using IMO
Why not make all you RAW adjustments in Lightroom Develop module. The raw processing engine is the same as ACR and you can choose "auto save changes to xmp" in the preferences.
Ah, bingo. That works, abet slowly (see above). Okay, I will just have to remember to manually do that once I save changes to LR from xmp data. I guess I thought LR would be smart enugh to do that itself, but I guess not. And again, I find it faster to go back & forths, even with an extra step.
LR can be set to automatically write any changes to xmp, it doesn't have to be done manually (set this in preferences) you just have the choice. It won't read changes made in other applications automatically as this would be a very bad idea..it would after all over write the LR database. So if you do want to over write the LR database you must activly choose to do so.
.

Security settings change when rendered from third party Windows 2008 R2 server

We created a fillable PDF form in Adobe Acrobat and made it Reader extended. Opening the form on a local hard drive the security settings show that Signing: is Allowed. We can sign documents in the form with a signature pad.
After we upload it to a third party Windows server 2008 R2, and we later go to access the form, the server renders it back to us in Adobe Reader. We are unable to digitally sign documents in the form with a Topaz signature pad. We notice that although the form was originally created with the form being Reader extended the security settings change to Signing: Not Allowed.
How can we get the server to render the document back to us where we can digitally sign documents in the form?

The second file still shows the extended rights header is present (it's warning you about restrictions at the top of the dialog while also reporting the method is "no security") but the digital signature which grants those extended rights will be invalidated if *anything* in the file structure is changed. I suspect in this case that the server software is doing something to your file; it may be trivial such as adding an XMP tag, but it's enough to break the hash check.

Sequence settings changed and digital cinema freezes. what now?

hello there.
i'm a new fcp user and i could really use some help on some issues that came up while working on a film project.
the material was captured with the camera function of a digital still camera, which resulted in rushes of .avi format, 30 fps, 640X480 frame size.
we then converted these into .mov clips using quicktime and compressor so that we can work without the need to render. we encoded them using the Apple ProRes 422 codec.
i opened a NTSC project to work on this and have created a sequence preset having exactly the same settings as my clips (Apple ProRes 422, 30 fps, etc).
i'm cutting the whole project on a macbook pro (see details below) running fcp 6.0.3 and i'm using a second monitor toggling between browser and digital cinema desktop preview.
everything was working fine till yesterday, when suddently some sequences needed rendering (while they were working fine till then) and dcdp freezed (that is i get the first frame and i can hear the sound when i playback a clip or a sequence and then i get the current frame when i stop it).
i've checked the sequence settings and i've found out that all of my sequences are now pal, 720X576, 25 fps. that's the first part of the problem. i tried changing the sequence settings, but of course i cannot change the frame rate; i've tried creating a new sequence with the correct settings and then copy&paste the clips from the prev sequence but then video and audio go out of synch by 2 frames. how did my settings changed all of a sudden? is there a way to keep my edited sequences without the need to manually re-cut the whole thing?
as far as the second part of the problem is concerned (the dcdp not working anymore), i've tried changing my settings (going from full screen to raw, trying single frame against all frames, etc) but still it doesn't work. the rest of the settings are ok (eg. i've found in the forum that the checkbox about playback mirrored on the desktop should be ticked and it was already).
this computer is never conected to the internet and it has never been manually updated (so there is not a way that an OS update is not working well with fcp).
any ideas?
thanx,
nikos.

I've experienced the exact same problems you are having and it's driving me nuts.
It's not like my system has changed. I bought the Mac Pro and Final Cut Studio together and all was well when I first installed it. That initial project was an HDV project and DCDP worked great.
Since then I'm working mostly on SD PAL projects and when I go to preview it on the desktop it does the first frame freeze when you hit play and parks on the current frame when you hit stop.
I can resize the main edit window to full size and the sequence plays back fine but when I go to DCDP it just won't play at all. It feels like a bug but this is the first time I have found someone else with the same problem. By the way, I'm only using one monitor so the mirror desktop thing made no difference.
I know the DCDP isn't great quality but it's fine for getting a general overview and I sure do miss it.
Help us.......please......

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and of facetime on settings,change id's.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and off facetime on settings,change id's, mute,unmuted,reset network settings!! But nothing change,i mean is there a problem with my ipad or the facetime has a problem right now?my friend seems doesnt have a problem with her ipad,it just happen suddenly yesterday it was ok but today when i tried calling my husband this is what happens, can anyone please help me!!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Help...Iphone 5c settings changed by themselves

I have an iPhone5c and today my settings changed automatically by themselves and when I have attempted to change them back they will not stick.
Specifically my battery percentage has disappeared and my message settings have changed as well. I had my settings to where there would be no message preview but now there is a preview and I am unable to change them back when I select those options. I change the setting back to how it was but then it reverts to how it automatically changed.
Can someone please assist me with how to fix this!? Aside from paying $30 or making an appointment, I was advised this was my only option.
Thank you in advance!

Your profile says you are using IOS 8.0.2?
You can update to the latest IOS 8.1.1.
As for settings not sticking:
Check if you have Restrictions set for those items.
Note: you need to enable Restriction to change/see what is set.

HT1222 I am not able to update my iPad to new version,needs any settings changes?

I am not able to update my iPad to new version,needs any settings changes?

How are you trying to update? Have you tried connecting your iPad to your computer running iTunes and update that ways? Please tell us what you have tried, what happened, and what if any, error messages you received.

Settings changing when adding to another movie

Each time I attach a new chapter (mini movie) PROJECT to the already existing main movie PROJECT the settings change. I have tried adding on the front with the new chapter as well as trying to add the main movie to the mini movie. Is there a way to lock all settings on a movie so when it is added to another movie the setting won't change oon either clip. The chapter movie is approximately 1 1/2 minutes long and the main clip is approximately 9 Minutes long. There are several transitions, and scrolls included in both clips.
Message was edited by: jimfromdenver

Hi Luis, thanks for the reply. I first made a video approximately 8 minutes long. I used digitized video, still images, sound tracks, titles and numerous transitions between the clips. I then opened a new project and made a movie of one of the last letters sent home by the veteran prior to his death. I also used transitions, movie clips, titles and various images. So far I have three of these last letters completed. I was able to copy and pasted two of the letter clips in front of the main generic movie. However, when I attempted to paste the third clip at the beginning of the main movie and two letters - it causes some of the titles, scrolls to overlap.

Java doesn't pick up system's DNS settings change until restarted

Hello,
I have a service running on a few Linux computers. Those computers have a NIC, which is configured with a fixed IP address. So /etc/resolv.conf contains the IP address of the LAN's DNS server. But most of the time, the computers are not plugged into the LAN at all. Instead, they connect themselves periodically to the Internet by establishing a ppp connection. When it happens, the ISP's DHCP server assign them new IP parameters, including their DNS server's IP address. And /etc/resolv.conf gets updated with this address.
But it seems that java doesn't take care of DNS change taking place during a run. Which means that my program (started at boot with no connectivity at all) tries to connect to some host, and obviously trigger an "UnknownHostException" (at that point it does try to contact the LAN's DNS server). Quite logical. Later, the ppp link become active. But my program still try to contact the LAN's DNS server, despite the new configuration in /etc/resolv.conf. As such, it will forever trigger UnknowHostExceptions, until it gets restarted (it will then pick up the new settings) or it is plugged back into the LAN (it will finally reach the LAN's DNS server).
This is quite a problem as during one single execution, the machine may encounter several DNS configuration changes, and this problem basically means that it will be impossible for my application to resolve any name at all.
So is there a way to tell Java to re-read the system wide DNS configuration? Or is there some option to prevent Java to "cache" the DNS server to use?
To demonstrate my problem, I've written a simple test case, see below.
To get the problem:
1) Put a bogus DNS server into your /etc/resolv.conf
2) Start the test program. Wait for some time: it will trigger UnknownHostExceptions.
3) Fix the entry in /etc/resolv.conf, and check it actually works (eg ping www.google.be)
4) Test program will continue to trigger UnknownHostExceptions forever.
One interesting fact is that someone tried this test on Windows, and didn't suffer from this behaviour, eg the application reacts to DNS system settings changes dynamically. So it looks like a Linux-only problem.
Thanks in advance for your insight.
Pierre-Yves
package com.test.dnsresolver;
import java.net.InetAddress;
import java.net.UnknownHostException;
public class DnsResolver {
    private static String urlString = "www.google.com";
    public static void main(String[] args) {
         * Specified in java.security to indicate the caching policy for successful
         * name lookups from the name service. The value is specified as as integer
         * to indicate the number of seconds to cache the successful lookup.
        java.security.Security.setProperty("networkaddress.cache.ttl" , "10");
         * Specified in java.security to indicate the caching policy for un-successful
         * name lookups from the name service. The value is specified as as integer to
         * indicate the number of seconds to cache the failure for un-successful lookups.
         * A value of 0 indicates "never cache". A value of -1 indicates "cache forever".
        java.security.Security.setProperty("networkaddress.cache.negative.ttl", "0");
        int loopCounter = 0;
        while (true) {
            InetAddress resolved;
            try {
                resolved = InetAddress.getByName(urlString);
                System.out.println("Loop " + loopCounter + ": resolved IP address: " + resolved);
            } catch (UnknownHostException e) {
                System.out.println("Loop " + loopCounter + ": UnknownHostException");
                e.printStackTrace();
            loopCounter++;
            try {
                Thread.sleep(1000);
            } catch (InterruptedException e) {}
}

Well, the nameservice property allowing to specify my DNS server of choice is interesting (I didn't know about those), but not very usable, as the DNS server to use is not known in advance (it may be whatever the ISP tells me to use at the time where the ppp link gets established). So no real solution there.
The fact that it caches /etc/resolv.conf content for 300s is very interesting, but having no possibility to impact on this duration really is a pity. There should be some kind of property to fix this behaviour. So as you say, a custom provider may be the only solution.
So far, the hack I use to get this working is based on code similar to this one (it is presented here in a similar form than my test case above). Obviously, reading the /etc/resolv.conf for each dns resolution is not an option in a real environment, but you get the idea.
package com.test.dnsresolver;
import java.io.BufferedReader;
public class DnsResolver {
     private static final String urlString = "www.google.com";
     private static final String resolvConf = "/etc/resolv.conf";
     public static void main(String[] args) {
          int loopCounter = 0;
          while (true) {
               loopCounter++;
               try {
                    Thread.sleep(1000);
               } catch (InterruptedException e) {}
               // Parse the current DNS server to be used in the config
               String nameserver = null;
               try {
                    BufferedReader input = new BufferedReader(new FileReader(new File(resolvConf)));
                    String currentLine = null;
                    while (( currentLine = input.readLine()) != null){
                         // Take care of potential comments
                         currentLine = currentLine.substring(0, currentLine.indexOf("#") == -1
                                   ? currentLine.length() : currentLine.indexOf("#") );
                         if (currentLine.contains("nameserver")) {
                              // It is the line we are looking for
                              nameserver = currentLine;
                              break;
               } catch (FileNotFoundException e) {
                    System.out.println("Loop " + loopCounter + ": FileNotFoundException");
               } catch (IOException e) {
                    System.out.println("Loop " + loopCounter + ": IOException");
               if (nameserver == null) {
                    // No "nameserver" line found
                    System.out.println("Loop " + loopCounter + ": No nameserver found in configration file!");
                    continue;
               // Trim it to just contain the IP address
               nameserver = (nameserver.replace("nameserver", "")).trim();
               System.out.println("Loop " + loopCounter + ": Going to use DNS server " + nameserver);
               // At this point, we know which server to use, now perform the resolution
               Hashtable<String, String> env = new Hashtable<String, String>();
               env.put("java.naming.factory.initial", "com.sun.jndi.dns.DnsContextFactory");
               env.put("java.naming.provider.url",    "dns://" + nameserver);
               DirContext ictx;
               try {
                    ictx = new InitialDirContext(env);
                    Attributes attrs1 = ictx.getAttributes(urlString, new String[] {"A"});
                    System.out.println("Loop " + loopCounter + ": Manual resolution: +" + attrs1.get("a").get() + "+");
               } catch (NamingException e) {
                    System.out.println("Loop " + loopCounter + ": NamingException");
}So maybe I should adapt and package this into a proper provider and specify it for sun.net.spi.nameservice.provider. Any link, info or example about how a proper provider should look like?
Thanks for your advices!

Internet connection settings change?

Can anyone help please?? I am using broadband connection and using Virgin as an ISP. Everytime i switch off the computer and turn it on again the network settings change to 'internal modem' and i need to manually change back to 'speedtouch USB'. can anyone help please, it is really annoying and a apple newcomer i am thinking now i have made a mistake! any ideas would be most welcome.
thank you

Think there is an open bug on this...
Instead of restarting Firefox, if you toggle work offline on and then off again it should connect

Volume Settings Change on Reset

Volume Settings Change on ResetZ Randomly when I reset, the volume settings all 'max out' and refuse to change in the Creative Audio Console, despite what I do to change them. It is not shown in any menus, but you can hear that it is this way.
This then leads to weird noises as all the volume is too high for the features to work right. The only way I can get around this is to manually change the volume on everything when I use it (obviously not going to do this) after each reset/power-on, or I have to set it to default and change the settings again (gets annoying fast).
Anyone know why it would be doing this? It seems software related to me, rather than hardware.
OS: Vista 64Message Edited by Kogen on 05-26-2009 04:30 PM

I "feel your pain", having had this issue on average every 3 months or so. Sometimes it will spontaneously fix itself. I tried deleting the Home/Library/Mail/Mailboxes Outbox.mbox folder followed by closing and reopening Mail which worked for a very brief time only, then became an issue once more. I have 2 accounts in gmail.com which are the current outgoing server issues. One of them works and the other doesn't. Now when I create a new note there are 2 text boxes in the from area of the note all of a sudden.
This is a real problem because if I send mail using the other server, my business accounts will not recognize the incorrect server now being used by Mail to send all my outgoing as the address is not the one associated with my accounts.

How do I stop the Browser settings change window from appearing in bottom right corner of my screen

The following details appear in a small window of the bottom left of my screen which cannot be closed:
Browser settings change
! an unknown change was detected on your browser's search settings:
* Keep my current settings.
* I am aware of this change and approve it
Yes
when I click on Yes or on red X nothing happens and small window is still visible.

hello, this is usually caused by adware on your pc.
please run a scan of your system with [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & also manually check that you don't have any suspicious entries like 3rd-party-toolbars presently installed under ''firefox > addons > extensions'' (adware like babylon also might install some unwanted stuff that comes under the names "Browser Manager", "Browser Protector", "Bprotector", "Object Installer", etc.) or in the windows control panel > programs section.
afterwards install the search reset addon - it will revert the most common customziations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/
[[Remove a toolbar that has taken over your Firefox search or home page]]

SATA settings change in BIOS

The SATA Enabled BIOS settings on the 865PE NEO2 I am working on keep changing themselves back to no. I can set the setting to yes and the computer will boot fine, but after shutting the computer down for a while the settings change back to no. I have tried a new CMOS battery and a different hdd with no luck.
Please help

I have no idea what you're trying to say. Please go through all these: Moan Guide P4 Neo Unofficial Guide
Good luck.

When I started to open firefox, windows pops "browser settings change"

when I started to open firefox, windows pops "browser settings change" .. and the window can not be deleted or removed .. I want to ask how to remove it ..
in the window that says "an unknown change was detected on your browser's search settings:
keep my current settings
i am aware of this change and approve it
I've been picking and pressing yes but the window was still not working .. what should i do .. thank you

Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
You also need to check the Properties of the firefox.exe program in the Firefox program directory.
If you can't make the changes then you need to start Windows Explorer as Administrator.

Diadem V9.1 SP2c - DAT Files parameter settings change during work

Hello,
we use Diadem V9.1 SP2c in our company. There are a lot of colleagues using this software.
We use also parallel Diadem V6 / V8.
If we store Data (.DAT format) with V9 (Settings: ANSI, REAL32,..) the settings of the parameters change during the work with V9!!!
Originally I made a startscript setting up all these parameters in the right way.
What can I do, do avoid these changes in V9 during work? Older Versions can't open this data generated with V9 e.g. 'UNICODE' settings!
Thanks!

Hi again,
I am a little confused about the fact, that Diadem worked withe the wanted settings for a while and than changes the settings by itself somehow.
We dont know of any problem, where Diadem changes settings "by itself".
A possible reason for the problem might be a failure in the script.
If you change the settings without running the startscript (just via the Diadem Menu), does the settings change back after a while, too?
Regards,
Stefan Henke
NIG

Rendering: Settings Changed

Similar Messages

Maybe you are looking for