Rendering Size Problem
In my first Premiere project I am having a rendering problem. It's a simple 8 minute project with one video track and one audio track. The video track is 10 fps in .mov format and is 20.5 MB. The mono audio track is a simple voice over that is 8.3 MB. The sequence is set at the same size and fps as the video clip. When I render it, the resultant size is over 500 MB.
I've tried every way I can think of to render it differently, but can't seem to get the size down. It makes no sense to me that the final size would be so large. I've watched tutorials and done web searches and I can't find anything that helps me on my question. I'd appreciate any advice about how to render properly.
thanks
Depending on what use, you want the exported file for ...you choose a preset that suits.
eg .wmv, H264, QT, FLV etc...
Most will be compressed and that will make your file size smaller.
Tip: work backward from the delivery spec. If its a youtube delivery - use a Youtube H264 preset
Similar Messages
-
I've got an HP 8750 printer running with a Windows 7 Ultimate machine, and I've got a paper-size problem where it keeps telling me the paper is too big. It's set up for 11 x 17.
The actual wording on the printer is:
Paper installed is larger than needed. Press cancel to replace with correct size, if you wish to save paper, or press check mark to continue.
When you press the check mark it feeds the paper, but for a multi page-document I have to press the check mark for each page to feed.
How do I get it to print 11 x 17 paper without having to press the check mark for each page?''guigs2 [[#answer-672422|said]]''
<blockquote>
NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
# 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
# 2) Click "Content"
# 3) Next to "Languages", click "Choose"
# 4) Select "English/United States [en-us]", click "Add"
# 5) re-open "about:accounts"
# 6) Click "Get Started"
</blockquote>
Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work.... -
Is there a solution to Rapidweaver Stacks Cache size problems?
Is there a solution to Rapidweaver Stacks Cache size problems?
My website http://www.optiekvanderlinden.be , has about 100 pages and is about 250MB in size. Every time I open RapidWeaver with the Stacks-plugin, the user/library/cache/com.yourhead.YHStacksKit folder grows to several Gigabytes in size. If I don't manually empty the com.yourhead.YHStacksKit Cache daily, AND empty the Trash before i turn off my mac, my Mac still has problems and stalls at startup the next day. Sometimes up to 5 minutes and more before he really boots. If i have a been working on such a large site for a few weeks without deleting that cache, than my iMac doesn't start up anymore, and the only thing left to do is completely reinstall the iOs operating system. This problem doesn't happen the days i use all my other programs but don't use Rapidweaver.
Does anyone know a solution and / or what is the cause of this?once more,
i just launched my project in Rapidweaver, and WITHOUT making any changes to my pages, the cache/com.yourhead.YHStacksKit folder filled itself with 132 folders (total 84Mb), most of them containing images of specific pages etc. The largest folder in the cache is the one with the images of a page containing a catalogue of my company, this folder is 7Mb. It seems by just starting up a project, immediately different folders are created containing most of the images in my project, and some folders with a log.txt file. Still i don't see the reason why it is filling op a huge Cache even without making changes to the project. I have 2 different sites, so 2 different projects, and i get this with both of them. -
My mobile form of my homepage have some size problems!
Hello! My mobile form of my homepage have some size problems. All pages gets right size exept one. It only cover halv of the page. What is wrong?
Hello,
Can you please share the URl of the page with us so that we can get a better idea of the issue.
Usually this happens when any object is placed outside the browser are in Phone layout.
Regards
Vivek -
How to solve a rendering -50 problem in IMovie. I try many suggestions, but non of them helps to quit the problem. Is it a buck??
eyeonthewall wrote:
... FPS - 24.02
thanks - last wish .. opps, that sounds weird
if your time allows doing so:
download MpegStreamclip
open that file
cmd-f (=fixes timecode errors...)
choose Export Quicktime Movie/codec Apple Prores 422... if not listed, choose Apple Intermediate... keep other settings untouched.
try to use THIS version, and try to export again...
as mentioned above: I assume those non-standard-videos as main source for -50errors ....
would be a nice, cost-free fix for that ...... -
Size problem with Email sent from SAP
Hi everyone,
All our layouts today were developed with sap script
We started to send them by mail, using the standard way.
in the process they are converted to PDF format from OTF, because of this activity the size of the mail that I am getting is 1 Mega where as the source is only 300K (approximately).
We are already flagged the option of compressing.
As we see now we don't have any option to make the email to be smaller.
Is someone already encountered this problem? What option do I have? (Except of developing the layout again in Adobe)
Thanks allot
Udi
SD consultantFirst thanks
Sayali Paradkar , we used in the past this function module, but it was even worse.
We started to use the standard process of sending mail.
As we understand the program of converting OTF format to PDF cause the size problem.
And its define to send PDF out of the SAP, also we are using SAP definitions to compress all files :nSE38 -> RSTXPDF3 -> option FLATE_COMPR_OFF = OFF
But still the mails are very big,
Thanks again
Udi Marom -
Rendering in flv, size problem
hi everyone,
i am using the after effect cs5 version, and when chosing the flv rendering format, the rendered area of my composition changes.
hence, when imported in flash, the working area around the imported item is not the same than the composition size in after effect.
it it probably more clear with the screenshots i will attach to the document.
when exported in quicktime it works fine, but i must have a transparent background, so i have to export it in flv to make it work
if someone knows anything about this, any help would be welcomeThat's never gonna work. FLV has certain format constraints and that's what the cute little triangle in the left bottom corner of the output module is trying to tell you. Click on it for magic...
Mylenium -
FCP - Massive file size problem.
So I've been exporting out a 21min sequence out of fcp 7. In past edits and on the same project file, the export has been fine, rendering out at a healthy 6gb. But recently the final file size has become 29gb. This is obviously not right. My question is, what is going on and how can I fix it?
The only thing that has changed is I've done a color grade (from Color). So some of the files are different, but the new color graded clips aren't any bigger than the origianl ones, so I don't think thats the problem.
Another random thing that happend is: When exporting I give the file a name, e.g. Helloworld And I select show file extension. The weird thing is when it's completed its export, the file name then becomes Hellowordmov.mov I have not idea where that extra mov is coming from, (and it doesnt appear when I select show file extension). What is going on here?
Below are my sequence settings. I chose File - Export - Quicktime Movie... And keep it on Current Settings.
Any help is much appreciated.The Digital Rebellion Video Space Calculator shows 28.23 GB.
http://www.digitalrebellion.com/webapps/video_calc.html?format=prores_422_hq_108 0&frame_rate=f25&length=21&length_type=minutes -
Printing and scanning size problems (half size)
Hello,
I am having an issue with my Pixma MP170. When printing multiple pages or scanning a paper document, the size come out really small all of a sudden and two pages will be together in one print or scan. I looked for updated drivers but that doesn't look to be the issue and the problem pesists.
I tried to reset the printer to default but nothing.
Not sure how to proceed.
Thanks for any suggestion.I have had something very like your problem.
Mine is printing quarter size in landscape and is also not scanning or doing copies at the moment..
I can find no way of setting it and it ignores all settings sent from the computer.
It printed one test page correctly and once I tried printing a small text file it came out small and in landscape and now even the test page is also small and also in landscape.
I am tempted to look inside for an engineering jumper or backup battery.
Mine is an MP270. -
Edit box length size problem...at Detail Section.
hi.
Plz have a look on below image.
This is my problem.
in details section i put one edit box... like below..
the data is comming from data base..
Header 1
but the size of the filed is more than the size of the Edit box..
i all ready checked can grow option in format field common properties.
but horizontal line is not adjusting ....
what should i do...Hi Srini,
You can't place another object directly below an object that 'grows'.
Create another section and move the line to this new section.
-Abhilash -
Swing layout/size problem with JFrame and JApplet.
I have a class that extends a JFrame, the classes layout is BorderLayout. I then have a class that extend JApplet, this classes layout is GridBagLayout (this class has a JTabbedPane - which contains JPanels). The problem I'm having is no matter how big I make the size of the applet or frame (using setSize), the applet/frame stays the same size - no matter how large I make it.
Can anyone please help?
Thanks,
dosteovHere is the basic code:
Thanks in advance,
dosteov
public class EADAdm extends JApplet
EADAdmFrame theFrame = new EADAdmFrame(this);
public void init()
// Take out this line if you don't use symantec.itools.net.RelativeURL or symantec.itools.awt.util.StatusScroller
// symantec.itools.lang.Context.setApplet(this);
// This line prevents the "Swing: checked access to system event queue" message seen in some browsers.
getRootPane().putClientProperty("defeatSystemEventQueueCheck", Boolean.TRUE);
// This code is automatically generated by Visual Cafe when you add
// components to the visual environment. It instantiates and initializes
// the components. To modify the code, only use code syntax that matches
// what Visual Cafe can generate, or Visual Cafe may be unable to back
// parse your Java file into its visual environment.
//{{INIT_CONTROLS
getContentPane().setLayout(new GridBagLayout());
setEnabled(false);
getContentPane().setBackground(java.awt.Color.lightGray);
setSize(800,800);
getContentPane().add(AdmTab, new com.symantec.itools.awt.GridBagConstraintsD(0,1,2,1,0.5,0.5,java.awt.GridBagConstraints.CENTER,java.awt.GridBagConstraints.HORIZONTAL,new Insets(3,12,4,14),120,120));
AdmTab.setFont(new Font("Dialog", Font.PLAIN, 12));
titleLbl.setHorizontalTextPosition(javax.swing.SwingConstants.CENTER);
titleLbl.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
titleLbl.setText("EAD Administration");
getContentPane().add(titleLbl, new com.symantec.itools.awt.GridBagConstraintsD(0,0,1,1,0.0,0.0,java.awt.GridBagConstraints.CENTER,java.awt.GridBagConstraints.NONE,new Insets(12,36,0,0),307,15));
titleLbl.setForeground(java.awt.Color.blue);
titleLbl.setFont(new Font("Dialog", Font.BOLD, 15));
exitBtn.setText("Exit EAD Administration");
exitBtn.setActionCommand("Exit EAD Administration");
getContentPane().add(exitBtn, new com.symantec.itools.awt.GridBagConstraintsD(0,2,2,1,0.0,0.0,java.awt.GridBagConstraints.CENTER,java.awt.GridBagConstraints.NONE,new Insets(6,371,10,14),66,8));
exitBtn.setFont(new Font("Dialog", Font.PLAIN, 12));
//theFrame.setVisible(false);
login();
AdmTab.addTab("Administration", new LogoPanel() );
userPanel = createUserPanel();
AdmTab.addTab("Edit Users", userPanel );
fpoPanel = createFPOPanel();
AdmTab.addTab("Edit FPO", fpoPanel );
regulationPanel = createRegulationPanel();
AdmTab.addTab("Edit Regulations", regulationPanel );
rolloverPanel = createRolloverPanel();
AdmTab.addTab("Rollover", rolloverPanel );
//{{REGISTER_LISTENERS
SymMouse aSymMouse = new SymMouse();
this.addMouseListener(aSymMouse);
SymAction lSymAction = new SymAction();
exitBtn.addActionListener(lSymAction);
SymKey aSymKey = new SymKey();
this.addKeyListener(aSymKey);
theFrame.getContentPane().add(this);
public class EADAdmFrame extends JFrame
EADAdm theApplet;
public EADAdmFrame(EADAdm theMainApplet)
//{{INIT_CONTROLS
// theApplet = theMainApplet;
// this.getContentPane().add(theApplet);
getContentPane().setLayout(new BorderLayout(0,0));
getContentPane().setBackground(java.awt.Color.lightGray);
setSize(1000,1000);
setVisible(false);
theApplet = theMainApplet;
//{{REGISTER_LISTENERS
SymWindow aSymWindow = new SymWindow();
this.addWindowListener(aSymWindow);
SymComponent aSymComponent = new SymComponent();
this.addComponentListener(aSymComponent); -
Rendered text problems in 5.1.2
I am working on a film project that has a lot of subtitles. (The dalies are digitized at HD DVC-Pro 720p) I was editing on a station running Final Cut Pro 5.1.1 (g5) with no real problems. I recently took the project with me on a trip to work on using my macbook pro (intel) running 5.1.2. I have discovered that all of my rendered text in my timelines is now uneditable. I can't move the text, I can't change the text, I can't even delete the text. I also can't change any of the footage running underneath the rendered text. It has become an immutable part of my film. This is obviously a huge problem. Has anyone else run accross this problem? Is it something that Apple is aware of? Any fixes? If not I may have to move to Avid and start all over again.
Not that strange, really. Several different NLEs can sometimes lock onto a render file and not update the output until that render file is deleted.
Rather simple fix, just a little time consuming.
Next time don't be so quick to threaten to jump ship. First problem and you were ready to move to Avid. I've had more problems working on Avids than I have on FCP. MANY more problems. FCP problems are usually due to user error or third party hardware. Avid problems shut you down for a couple weeks while you ship out your hardware. -
Hi,
I am using Adobe Acrobat Elements 7.0 in my computer to convert files like .txt and .doc to .pdf files. But currently I'm facing a problem with the converted .pdf file size. For example, my .doc file is 5MB and after I convert to a .pdf file, it becomes 10MB. The file size basically multiplies itself by 2.
I've tried converting .txt and .doc files and it gives me the same problem. I've tried reinstalling, tried all kinds of settings, and recreating user profile but it doesn't help. Can anyone help me? Thank you very much.Sorry. The problem is caused when I want to password protect a .pdf using elements. So I used Adobe Reader to open the .pdf file then I'll print using Adobe Printer so that I can password protect it and output file size is actually 10 times the normal .pdf file.
Please help!! -
Print Paper Size Problem after Mavericks Upgrade
I migrated my Apps, Data and System Settings from a Macbook running OSX Lion to a new Macbook Pro running Mavericks.
The problem I now have is that the application 'Family Tree Maker 2' cannot get the paper size right. No matter which Paper size I select, it is shown as half size in the Application Print Preview screen and this error carries through to actual printing.
so A4 210 by 297 mm displays as 5.8 x 4.1 inches (which is Half Size).
The problem is significant because the application formats it's output to fit into half of the available space.
I have unsuccessfully tried;
- removing and reinstalling the Application.
- Adding my Brother Laser printer with the latest Mavericks compatible driver.
- Resetting the printing system.
- Repairing disk permissions
- Adding a new User Account
- Deleting plists associated with com.ancestry
iWork Pages is working correctly.
I have raised this with ancestry.com however it appears that I am the only person that has experienced this problem.
Any suggestions would be appreciated.Problem is worse than that. Whilst the Paper is shown as half size, the family tree diagram boxes are produced twice as wide as they should be.
If I select A4 Paper, a diagram that would fit on one page is now spread across two.
If I select A3 Paper, the preview indicates the paper size as A4 8.3 x 5.8 inches however the diagram size and position on the paper are unchanged and I just get loads of white space around the outside of the diagram.
It does sound like an Application problem but it is still working fine on my old OSX Lion machine. Something has happened in the migration. -
MTU Size Problem Loading Certain Webpages
Hello Colleagues,
I'm having a strange problem dealing with MTU sizes and loading certain webpages. I am aware of the default Microsoft MTU of 1500 and also using GRE IPSEC Tunnels recommended at MTU size 1400. I have since manually set some users PC's to MTU of 1400 and most of those users are experiencing no issues. However, there are a few users who still experience website loading issues even though I have manually changed their MTU size to 1400.
These are domain accounts will the same image loads on their machines, so all have the same permissions, rights, firewall settings, etc. They all use the same LAN, switches, and routers.
Here are the router configs, router 1 and router 2
Router 1
Current configuration : 9006 bytes
version 15.3
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname R-US-RS-WVPN1
boot-start-marker
boot system flash:c1900-universalk9-mz.SPA.153-1.T1.bin
boot system flash:c1900-universalk9-mz.SPA.151-3.T1.bin
boot-end-marker
logging buffered 64000
enable secret 5 *removed*
no aaa new-model
clock timezone CET 1 0
clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause rootguard
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery interval 303
ip cef
ip domain name corp.com
ip name-server 10.###.8.21
ip name-server 10.###.8.96
ip inspect dns-timeout 90
ip inspect tcp idle-time 60
ip inspect name fw smtp timeout 120
ip inspect name fw ftp timeout 120
ip inspect name fw realaudio
ip inspect name fw tftp timeout 30
ip inspect name fw udp timeout 30
ip inspect name fw tcp timeout 60
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-316595902
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-316595902
revocation-check none
rsakeypair TP-self-signed-316595902
crypto pki certificate chain TP-self-signed-316595902
certificate self-signed 01
*removed*
quit
license udi pid CISCO1921/K9 sn FTX153182M8
spanning-tree vlan 229 priority 8192
redundancy
ip ssh version 2
crypto isakmp policy 10
hash md5
authentication pre-share
lifetime 3600
crypto isakmp key *removed* address 70.###.172.142
crypto isakmp key *removed* address 184.###.###.254
crypto isakmp keepalive 35 11
crypto ipsec transform-set FY-WVPN-Tunnel esp-aes esp-md5-hmac
mode tunnel
crypto map vpn 10 ipsec-isakmp
set peer 70.###.172.142
set peer 184.###.###.254
set transform-set FY-WVPN-Tunnel
match address gre-tunnel-list
interface Loopback0
ip address 10.###.0.10 255.255.255.255
interface Tunnel2291
description Primary-TimewarnerTelecom-Ral-FayWVPN1
ip address 10.###.99.26 255.255.255.252
no ip redirects
cdp enable
tunnel source 66.###.161.126
tunnel destination 184.###.###.254
crypto map vpn
interface Tunnel2293
description Primary-TimewarnerTelecom-Ral-FayWVPN2
ip address 10.###.99.154 255.255.255.252
no ip redirects
cdp enable
tunnel source 66.###.161.126
tunnel destination 70.###.172.142
crypto map vpn
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description TW Telecom/DMVPN1
ip address 66.###.161.126 255.255.255.252
ip access-group Block-Internet in
ip access-group Block-Internet out
duplex auto
speed auto
no cdp enable
crypto map vpn
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0/0
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/1
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/2
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/3
description PBX Eth1
switchport access vlan 229
no ip address
interface Vlan1
no ip address
shutdown
interface Vlan229
ip address 10.###.229.253 255.255.255.0
ip helper-address 10.###.231.201
standby 229 ip 10.###.229.254
standby 229 priority 105
standby 229 preempt
router eigrp 100
network 10.0.0.0
ip forward-protocol nd
no ip http server
ip http secure-server
ip route 70.###.172.142 255.255.255.255 66.###.161.125
ip route 184.###.###.254 255.255.255.255 66.###.161.125
ip route 205.###.96.180 255.255.255.252 66.###.161.125
ip access-list extended Block-Internet
permit esp host 66.###.161.126 host 184.###.###.254
permit esp host 184.###.###.254 host 66.###.161.126
permit udp host 66.###.161.126 host 184.###.###.254 eq isakmp
permit udp host 184.###.###.254 host 66.###.161.126 eq isakmp
permit esp host 66.###.161.126 host 70.###.172.142
permit esp host 70.###.172.142 host 66.###.161.126
permit udp host 66.###.161.126 host 70.###.172.142 eq isakmp
permit udp host 70.###.172.142 host 66.###.161.126 eq isakmp
permit icmp host 66.###.161.126 host 184.###.###.254
permit icmp host 184.###.###.254 host 66.###.161.126
permit icmp host 66.###.161.126 host 70.###.172.142
permit icmp host 70.###.172.142 host 66.###.161.126
permit icmp any any echo-reply
permit icmp any any time-exceeded
permit icmp any any packet-too-big
permit icmp any any traceroute
permit icmp any any unreachable
deny ip any any
deny icmp any any
ip access-list extended gre-tunnel-list
permit gre host 66.###.161.126 host 184.###.###.254
permit gre host 66.###.161.126 host 70.###.172.142
logging host 10.100.###.254
logging host 10.100.###.246
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community P_RW RW
snmp-server community P_RO RO
snmp-server enable traps entity-sensor threshold
snmp-server host 10.100.###.246 public
snmp-server host 10.100.###.254 public
access-list 20 permit 10.###.9.3
access-list 20 permit 10.###.8.16
access-list 20 permit 10.100.###.249
access-list 20 permit 10.100.###.254
access-list 20 permit 10.100.###.246
control-plane
banner motd ^CCCCCCC
****************** Warning! Warning! Warning! ********************
This system is restricted to authorized users for business
purposes. Unauthorized access is a violation of the law. This
service may be monitored for administrative and security reasons.
By proceeding, you consent to this monitoring
****************** Warning! Warning! Warning! ********************
^C
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
line vty 5 15
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
scheduler allocate 20000 1000
ntp server 10.###.8.8 prefer
ntp server 10.###.231.200 prefer
ntp server 10.###.8.69
ntp server 10.###.1.6 prefer
end
Router 2
Current configuration : 9013 bytes
version 15.3
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname R-US-RS-WVPN2
boot-start-marker
boot system flash:c1900-universalk9-mz.SPA.153-1.T1.bin
boot system flash:c1900-universalk9-mz.SPA.151-3.T1.bin
boot-end-marker
logging buffered 64000
logging console critical
enable secret 5 *removed*
no aaa new-model
clock timezone CET 1 0
clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause rootguard
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery interval 303
ip cef
ip domain name corp.mann-hummel.com
ip name-server 10.###.8.21
ip name-server 10.###.8.96
ip inspect dns-timeout 90
ip inspect tcp idle-time 60
ip inspect name fw smtp timeout 120
ip inspect name fw ftp timeout 120
ip inspect name fw realaudio
ip inspect name fw tftp timeout 30
ip inspect name fw udp timeout 30
ip inspect name fw tcp timeout 60
ipv6 multicast rpf use-bgp
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-3179596086
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3179596086
revocation-check none
rsakeypair TP-self-signed-3179596086
crypto pki certificate chain TP-self-signed-3179596086
certificate self-signed 01
*removed*
quit
license udi pid CISCO1921/K9 sn FTX153182M2
spanning-tree vlan 229 priority 1###84
redundancy
ip ssh version 2
crypto isakmp policy 10
hash md5
authentication pre-share
lifetime 3600
crypto isakmp key *removed* address 70.###.172.142
crypto isakmp key *removed* address 184.###.###.254
crypto isakmp keepalive 35 11
crypto ipsec transform-set Fay-Ral-WVPN-Tunnel esp-aes esp-md5-hmac
mode tunnel
crypto map vpn 10 ipsec-isakmp
set peer 184.###.###.254
set peer 70.###.172.142
set transform-set Fay-Ral-WVPN-Tunnel
match address gre-tunnel-list
interface Loopback0
ip address 10.###.0.12 255.255.255.255
interface Tunnel2292
description Failover-TimewarnerCable-Ral-Fay-WVPN2
ip address 10.###.99.30 255.255.255.252
no ip redirects
cdp enable
tunnel source 96.###.25.226
tunnel destination 184.###.###.254
crypto map vpn
interface Tunnel2294
description Failover-TimewarnerCable-Ral-Fay-WVPN2
ip address 10.###.99.158 255.255.255.252
no ip redirects
cdp enable
tunnel source 96.###.25.226
tunnel destination 70.###.172.142
crypto map vpn
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Fay-Ral WVPN
ip address 96.###.25.226 255.255.255.252
ip access-group Block-Internet in
ip access-group Block-Internet out
duplex auto
speed auto
no cdp enable
crypto map vpn
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/0/0
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/1
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/2
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/3
description PBX Eth2
switchport access vlan 229
no ip address
interface Vlan1
no ip address
shutdown
interface Vlan229
ip address 10.###.229.252 255.255.255.0
ip helper-address 10.###.231.201
standby 229 ip 10.###.229.254
standby 229 preempt
router eigrp 100
network 10.0.0.0
ip forward-protocol nd
no ip http server
ip http secure-server
ip route 70.###.172.142 255.255.255.255 96.###.25.225
ip route 184.###.###.254 255.255.255.255 96.###.25.225
ip route 205.###.96.180 255.255.255.252 66.###.161.125
ip access-list extended Block-Internet
permit esp host 96.###.25.226 host 184.###.###.254
permit esp host 184.###.###.254 host 96.###.25.226
permit udp host 96.###.25.226 host 184.###.###.254 eq isakmp
permit udp host 184.###.###.254 host 96.###.25.226 eq isakmp
permit esp host 96.###.25.226 host 70.###.172.142
permit esp host 70.###.172.142 host 96.###.25.226
permit udp host 96.###.25.226 host 70.###.172.142 eq isakmp
permit udp host 70.###.172.142 host 96.###.25.226 eq isakmp
permit icmp host 96.###.25.226 host 184.###.###.254
permit icmp host 184.###.###.254 host 96.###.25.226
permit icmp host 96.###.25.226 host 70.###.172.142
permit icmp host 70.###.172.142 host 96.###.25.226
permit icmp any any echo-reply
permit icmp any any time-exceeded
permit icmp any any packet-too-big
permit icmp any any traceroute
permit icmp any any unreachable
deny ip any any
deny icmp any any
ip access-list extended gre-tunnel-list
permit gre host 96.###.25.226 host 184.###.###.254
permit gre host 96.###.25.226 host 70.###.172.142
logging host 10.100.###.254
logging host 10.100.###.246
snmp-server community P_RW RW
snmp-server community P_RO RO
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server enable traps entity-sensor threshold
snmp-server host 10.100.###.246 public
snmp-server host 10.100.###.254 public
access-list 20 permit 10.###.9.3
access-list 20 permit 10.###.8.16
access-list 20 permit 10.100.###.249
access-list 20 permit 10.100.###.254
access-list 20 permit 10.100.###.246
control-plane
banner motd ^CCCCCC
****************** Warning! Warning! Warning! ********************
This system is restricted to authorized users for business
purposes. Unauthorized access is a violation of the law. This
service may be monitored for administrative and security reasons.
By proceeding, you consent to this monitoring
****************** Warning! Warning! Warning! ********************
^C
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
line vty 5 15
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
scheduler allocate 20000 1000
ntp server 10.###.8.8 prefer
ntp server 10.###.231.200 prefer
ntp server 10.###.8.69
ntp server 10.###.1.6 prefer
endUPDATE
I have since applied the following config to the tunnel interfaces:
ip mtu 1400
ip tcp adjust-mss 1400
tunnel path-mtu-discovery
This worked and I was able to reset each users PC to default MTU size of 1500, but only until just now. I got a call from a user who explained that he wasn't able to reach some websites, again.
Sure enough, I've just confirmed that all of the users are unable to access the websites any longer.
This is crazy, does anyone have any ideas?
Maybe you are looking for
-
i need to resize a swf file thats 800 x 300 down to 600 x 226 how can i do this without having to set the new parameters in the embed tag like this <embed src="banner.swf" height="226" width="600"> ..?? is there a way to resize the whole project when
-
How do I get rid of iCloud spam
I've recently been receiving ban enormous amount of spam from my iCloud mail account. What can be done about this?
-
Can I control the system output via Logic Pro?
I know how to record system output in Logic Pro (CH 13&14), but in order to do that, the tracks in Logic Pro must be muted to avoid feedback. What I'm wondering is if I can control overall system output via a track/tracks in Logic Pro. I've got a Ple
-
I have a Macbook from 2006 running a 2GHZ Intel Core Duo Processor. Can I update this macbook to the newest OS?
-
AccessPrivileges - Adobe ActionScript 3 (AS3 ADEP Data Services) API Reference
This question was posted in response to the following article: http://help.stage.adobe.com/en_US/FlashPlatform/reference/actionscript/3/mx/data/AccessPri vileges.html [[ admin note - your staging server is broken, and spamming the production forums w