Rendering Subtitles (with Kona 3) causes Rendered sections to lose Contrast
Hello,
I'm adding Subtitles to an HD clip that I have in an "AJA Kona3 1080psf 24 10 Bit RGB" sequence preset.
I find that when I add a Subtitle, FCP asks to Render, but when I do so, I find that the Rendered Portions show a loss of Contrast.
Any idea how to get around this?
I have a Quad Mac running FCP 5.0.1 and Kona 3 installed.
Thanks in advance for your help.
Regards,
Rajnesh
Quad 2.5 GHz PowerPC G5 Mac OS X (10.4.8) Kona 3
Dual 2.7 GHz Powermac G5 Mac OS X (10.4.2)
Under Render Control I have:
Filters Checked
Frame Blending for Speed Checked
Motion Blur Checked
Render
Frame Rate 100% of Sequence Editing Timebase
Resolution 100% of Sequence Frame Size
Thanks in advance.
Rajnesh
Similar Messages
-
Pe10: opening a previously saved and rendered project, the work area indicates non-rendered sections
Pe10: when I open a previously saved and rendered project, the work area indicates a majority of non-rendered sections.
When I open a previously saved and rendered project, the work area indicates non-rendered sections. My project is approximately 59 minutes and 27 seconds.
What must be done to have a saved and rendered project, when open again, be rendered?TRUE_SEEKER wrote:
The price tag of $245 for the Prodad's Mercalli video software is too steep for me right now.
Corel's Avid VideoStudio Pro X4 Ultimate (what a mouthful) includes Mercalli SE. It was on sale at half-price on Amazon Black Friday and I missed it - mostly because I was trying to find out what the 'SE' part of it meant.
Annoyingly (very much so) it seems that Mercalli SE is pretty much the whole deal - a YouTube review of the Mercalli feature in VideoStudio by ProDAD (the Mercalli authors) included all the features I would expect to use.
So it seems that the $80 VideoStudio product includes the $150 Mercalli plug-in. Thus a workflow starting with Mercalli stabilisation in VideoStudio and then switching to PRE is viable. I can't really afford the full price VideoStudio product so I'm hoping for a similar 50% reduction after Christmas.
Cheers,
Neale
Insanity is hereditary, you get it from your children -
A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab
I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
I have reset IE9. Same problem.
I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
Any suggestions for how to solve this (other than using software rendering)?Thanks again for your reply. I appreciate the time you have taken to respond.
I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
2. Use another browser - I have no problems with either Firefox or Chrome -
How can I have a Pages document that is shared with me under my Pages section and not open it with the link?
Try this.
Open the document and select and copy a few pages, say ten pages.
Open a new blank document and paste the pages you copied into that.
Save it with a new name.
Work on those new pages to see if the problem has disappeared.
If this helps, continue breaking up the large file in to smaller chunks and working on them
You can of course later reverse the process and merge the files into one new one.
This suggestion is based on my experiences with large Word files. Breaking it up in to smaller chunks does two things. First, if there is any corruption in the old file, the new copies might escape that. Second, the Mac is faster handling the smaller chunks. -
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too
a. User trying to create delivery but stock not available.
b. When stock is not there it should show an error message in SAP screen but its not - like stock not available etc
c. Fedex gets delivery notice for the delivery; if its more than zero it will create delivery otherwise less than zero it won’t accept.
d. But issue its creating even its less than zero
Is there anyone who can help me out...When one is created with zero quantities it starts blocking our deliveries from getting through to fedex because deliveries will in doubt have been blocked at fedex. As we process our orders in morning and if there is an STO blocking orders, it will be in afternoon .
Any suggestions !!! -
Modules with Halo Theme causes errors in other modules with Spark theme
Hi,
We have a large application which calls several modules, some old and some new.
Most modules and the main App are using only MX components and were styled based on default mx theme, thus we want to compile these modules with the flag to use the old Halo theme.
But when we did this our new module that contains spark components (Which isn't compiled with this flag) couldn't find the default skin for the spark components.
Using the -keep-all-type-selectors flag didn't work in this case.
Only when we removed the Halo theme flag from other modules and main app it worked.
Is there any other option?
Because using the old modules with spark theme causes major change in the appearance of our application.
Thanks,
Dafna.I think if you mix themes you'll need to specify more styles on the
non-default theme because the set of globals and other defaults will be
different. -
Premiere Pro 6 and Audition Audio issues with Kona Lhi
Hello,
When I have Adobe Premiere Pro and Adobe Audition open at the same time, and I send an audio clip from Premiere Pro to Audition for editing, I have no sound in Audition. If I have only one of these programs open, the audio works fine in both. Since these programs are linked together it is essential that I have audio in both, even though, both programs are open. Is there a driver fix or some other way to get Premiere Pro to release the Kona Card LHi when switching to Audition? I am using a Mac Pro 2 x 2.4 6-core 24MB Ram 1333 DDR3 and Quadro 4000 with Kona Lhi Drivers 10.4.4 with Adobe presets.
Thanks,
Dunamis Starr | TV DepartmentHello Dunamis,
Unfortunately this is a known issue with the Kona card. I know this is something they would like to fix but I'm uncertain on the timeframe.
There are times when this workflow will work without issue but when it goes into the bad state you will need to quit the apps.
Peter Garaway
Adobe
Premiere Pro -
this is my problem ...I have a macbook pro version 10.6.7 and I cant install tunes 12 ....Ihave a i phone4, i cant use it with Itunes 10,,,I delete Itunes10,and now I cant use my Iphone with my macbook cause I don't have the correct version of Itunes,,,what is the version of Itunes i need to install?? i need it for my iphone 4 and my macbook 10.6.7
Run the Software Update pane of System Preferences or click here.
(121029) -
did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?
Why not contact HP tech support for assistance since they make the printer. While on their site you can look for an updated printer driver. Otherwise, try deleting the current installed driver, reset the print system, then reinstall your printer's driver.
Mac OS X- How to reset the printing system -
I want to create a form with a manager completing one section and a staff member another. Neither should be able to edit the others. Can different sections be password protected by different passwords? I'm thinking there might be an "official use only" function.
You can use 2 forms in one portfolio.
-
HDCAM capture with KONA LH. Recomended storage.
Hi all
I am about to undertake capturing and editing footage from a HDCAM source. I am used to working with Uncompressed SD footage normally from DIGIBeta, capturing using a AJA kona LH card with KONA KLbox connecting decks, etc. The computer is a 4 x 2.5 GHz PowerPC G5.
I can hire in relevant HDcam deck. Was planning to capture via SDI, using the AJA KONA 1080i 25 10bit (1080 50i is what the footage is recorded in). I believe they want to deliver it the same way, so hope to not do any down conversion for editing.
My main concern is storage. Normally when we work in 625 25 10bit setting we just capture onto externall drives conected via Firewire800. I believe however this would not be a fast enough connection when working with 1080i. If so can anyone recomend a decent solution which is on the cost effective side?
I am also wondering about the AJA Kona 1080i 25 ProRess (HQ) setting. Is this meant to be a loss-less compression, reducing file size whilst still maintaining HD resolution? Will this work with the current Firewire800 storage connection, as the file sizes, data rate, will be reduced? Bear in mind the program is for broadcast.
Any suggestion will be very much appreciated.
NeilFor UNCOMPRESSED you will need SERIOUS fast storage. Talking at LEAST eSATA, but really something like MiniSAS or Fibre. CalDigit VR or GRaid 3 via eSATA will work. up to 2TB. Or you can look into the HD One from them, or the EVO HD from MaxxDigital. Firewire won't cut it anymore for Uncompressed.
HOWEVER...prores is pretty lossless...compresses well. And you can capture that to firewire 800, or internal SATA drives. Caldigit VR will work, as will G-RAID 3. But it might be a good time to get good solid RAID 5 storage...so a tower like the maxxDigital or Caldigit ones.
Shane -
yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd
Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic. -
[svn] 4870: TextView with textAlign="justify" causes infinite loop and eventual RTE.
Revision: 4870
Author: [email protected]
Date: 2009-02-05 15:33:52 -0800 (Thu, 05 Feb 2009)
Log Message:
TextView with textAlign="justify" causes infinite loop and eventual RTE. Vellum sometimes returns width and/or height larger than the request width/height due to rounding error. This triggers a contentWidth/Height change event which triggers the scroller which comes back in to TextView updateDisplayList, etc.
QE Notes:
Doc Notes:
Bugs: SDK-19144
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19144
Modified Paths:
flex/sdk/branches/i10/frameworks/projects/flex4/src/mx/components/TextView.as -
To create a new apple ID, if I sign out of the current Apple ID account, and then sign in with a newly created account, will I lose any songs or apps on my Iphone and Macbook Pro computer that were downloaded from the old apple ID?
No, you will not loose anything. However, if you ever need to update any of that previously purchased content, or re-download it, you will have to use the older AppleID. Purchases are permanently tied to the AppleID you use when making the purchase.
Maybe you are looking for
-
Compaq Notebook CQ-45 137TX fails to boot
Hello, I own a Compaq CQ-45 137TX (Intel Core 2 Duo P7350, 3 GB RAM, 320GB HDD, nVidia GeForce 9200M GS, Windows 7(upgraded from Vista)) with a broken LCD Screen. Since repairing the screen made no sense for such an old laptop, I started using it as
-
I recently got a new Macbook Pro. I transferred my info from my old mac. Now when I startup my Macbook Pro, I get this error message ""/Library/StartupItems/IntegoCommon" has not been started because it does not have the proper security settings." I
-
Generate variable name from a String
I've got a String "MyVariable" and I need to reference a static variable named MyStaticClass.MyVariable. How do you turn a String into a variable name?
-
Inspection lot summary when GR post to same material and batch
Dear Experts, The business flow is, when material with same batch number come to plant, this batch may split and post to different storage location. we have tried setting control inslot parameter to "2 For each material batch and storage location" bu
-
Hi Colleagues, We are implementing CRM 7.0 Fact Sheet and retrieving following data from SD Fact Sheet: - Last Documents (working fine) - Backorders (working fine) - Credit Info (no data) We are preety sure that customer has credit data. We already d