Rendering times are ridiculous for simple move of text

Hello,
I love Final Cut Studio and get impatient with the rendering process involving simple tasks.
Today, I used the Boris 3D titler, came with Final Cut 5, created text for a logo (duration one minute long) and then I moved the text just a smidge to center it under the logo and this is after I rendered it for 25 minutes before this and boom! Again I have to render this out 25 minutes more. Wow! Could you tell me what I need to do to hasten this process? Ie...stop using Boris 3D titler, get more RAM, etc. This is unbelievable. For Motion's projects I understand, but for this simple application and process. Enlighten me please.
Thanks,
Jordan

Soy-yo wrote:
Do yo use DiskWarrior or TechTools? If no, your system can be a big mess where nothing can work properly.
Thanks for the contribution to the thread but your statement is not accurate nor does it apply to the conditions posited by the OP. These tools are capable of heavy duty directory and file maintenance—and they are nice to have in one's toolbox—but they are not indicated at all in this situation. Running DW and TT unnecessarily can create more problems than they solve.
If you are going to participate, post stuff you are confident about and with which you have competent experience. If you are unsure, say so. If you have experience or wish to cite scholarly references, do so.
Please consider carefully the downsides of your advice or recommendations.
bogiesan

Similar Messages

Is quick time pro suitable for home movies?

is quicktime pro suitable for home movies?

is quicktime pro suitable for home movies?
That depends on how you define "suitable" (the editing capabilities you want/need to use) and what you mean by "home movies" (the editing compatibility of the files you need/want to edit).
QT 7 Pro does not add any additional codec components. It merely unl, ocks editing/conversion features not available to to base QT 7 player app. If you to convert, trim, merge, edit, mask, layer, and/or composite various forms of "compatible" data (up to 99 tracks), then it is a cheap alternative to full video editing apps/suites costing hundreds or even thousands of dollars. While it has many advanced capabilities and features, the utility often requires the user to perform many of the actions manually at a low or basic graphic user interaction level. If you are expecting QT 7 Pro to open files the base QT 7 player won't already open, then you will be diasappointed.

Looking for simple movie player

I am looking for a very simple player with the following characteristics:
* all mplayer keyboard shortcuts (I imagine some kind of mplayer wrapper application)
* buttons for play/pause + scrollbar/progressbar + mute + volume
* ONE dialog with: path to a movie, path to a subtitle, choose subtitle encoding, subtitle font (eventually)
THAT'S IT, nothing more.
Codeine is close to being a perfect simple movie player, but the subtitle thingy doesn't really work as I'd like, from my testing.

try kmplayer or kplayer.

Workaround? - Using Interpret Footage AME renders active content only for original movie length

I submitted a bug on this behavior, but I am hoping that someone has found a workaround or maybe I am just using Interpret Footage incorrectly.
Here is the problem:
1. Import 20 second long 23.976fps source file into AME
2. Right-click item in Queue and choose Interpret Footage
3. Choose "Assume this frame rate:" and set to 18fps - Duration will update as expected to 0:00:26;19
Results:
Output file will have correctly re-timed active content up to 0:00:20;00 and then hold that frame (which correctly corresponds to 0:00:15;00 from the source file) to the end of the file at 0:00:26;18
Expected results:
Output file should contain the full content of the source file re-timed for the new duration.
NOTE: This behavior will also be apparent in the Export settings Preview window prior to encoding.
Mac OSX 10.7.5
AME: 6.0.2.81 (64-bit)

We are actually generating the files ourselves and keeping them 23.976fps (or 25fps for PAL-country clients). We're interpreting the incoming 23.976fps file as 18fps because that is the speed at which it was shot. Super-8 sound film like most other sound film was 'supposed' to be shot / projected at 24fps, but many shooters used 18fps to get more time out of a 50-foot camera load. Our company provides 24p (or 25p) files to clients, and in addition to providing 1 to 1 representations of their film at 23.976fps, we also provide 24p files with duplicate frames inserted so they are easy to work with in NLEs, yet approximate the correct motion for material that was shot at 12, 14, 16, 18 or 20 fps. Our Apple Compressor workflow works great for the 90+% of material that is silent or is sound film shot at 24fps. We would experiment with moving the entire speed-correction workflow to AME if it solved the 18in24 sound problem, and it _almost_ does. The behavior I described is obviously a bug and not 'works as intended' - it will then be a question of whether such an outside use case gets any attention. If I can come up with another use case that would be more popular, then I might get more visibility for the bug. I suppose that some may wish to batch out 24p files from 25p files using the same technique. That is, throw a pile of 25p files into AME, interpret them as 23.976 and write them out to 24p files. I would expect that the last 4% of those files would show a freeze frame...
Message was edited by: buckbito - typo fix

Published to folder iWeb site always using Times New Roman for every piece of text in published site and not showing the original text style used when building the site in iWeb.

Dear All
Hello from rainy, windy and cold North East England! I need to ask for your help as I'm new to iMac and new to iWeb and it's frustrating the life out of me!
I'm just beginning to build a website for my business. Previously, I used Frontpage, but it's been that long since I used it - I've forgotten half of it and so, I'm using iWeb instead as it's silly to use an iMac for business but a PC laptop for the website design.
I've got the background image I want on the homepage (beautiful image of a rain forest - even if I do say so myself!) and I'm trying to enter a text box at the lower half of the screen, in the centre of the page saying 'click to enter'. I type in the text, I edit it so as to change it to the font style of my company (Gill sans MT) and then I publish the site to a folder so that I can see what it would look like when viewed via the internet. When I do this - the font changes size to a bog standard size of 'so small you need a magnifying glass to read it', it changes colour from black to purple (which looks disgusting) and it changes font style from Gill Sans MT to Times New Roman.
It doesn't matter if I delete the entire site and start again or delete the text box, and insert a new one. I've googled this subject until I'm blue in the face and I can't find an answer - can anyone suggest anything that will help?
Many thanks for your help,
Best wishes,
Sean.

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
NOTE: If you don't use Web Safe Fonts any computer that does not have that font installed will substitute another font for it and change the look and feel of the web page.
So it's safest to use one of those web safe fonts.
OT

Are there differences between Solaris 8 and Solaris 2.6 in the way web pages are displayed for Chinese and Korean text using UTF-8 settings?

A user is running a web application on Solaris Release 2.6 with UTF-8. After the server was updated to Solaris 8, the application is experiencing problems with webpages containing Korean and Chinese text. The encoding is UTF-8. Has anyone experienced this problem? I checked the packages installed on Solaris 8 and they are consistent with what was installed on Solaris 2.6. Could this possibly be a patch-level problem? Thank you.

Hi,
It could be a problem with the necessary patche updation. refer the following FTP site for the Solaris pathces.
connect through the FTP cleint to sunsolve.sun.com
/pub/patches directory contains a lot of patches for solaris.
Find and install the corresponding patch require to solve your problem.

Which keyframes are necessary for moving items and text?

When moving text, do you need a center keyframe, a scale keyframe? Which ones are necessary? I usually add both not knowing for sure if they are needed.
Thanks.

What if you want to add keyframes at various places during a video segment or a still image and have it scale up and down at these different keyframes.
Can this all be done on the same clip? Example: I place a keyframe at the beginning of the clip and 5 seconds into the clip I scale it up and then I want to scale it back to normal at 10 seconds, and then do a pan from left to right at 15 second, etc.
Is the right way to do this to simply add keyframes on the same clip for each motion property I want to apply? Or should this be done somehow with copies of the same clip on different layers? How would you do this?
Thanks.

Reset position for linear movement

Hi All,
I am using PCI 7344 and UMI7774.I am using three of its Axis.The first two axis are just used as a DRO ( DIgital Read Out) and the third axis is used to control servomotor.
Now at a instant of time, I require to Reset all the axis position to zero.Now the third axis can be reseted by using the Reset Position Vi. But since the first two axis are manual, I have used scales which are used for linear movement measurement( The scales are same as encoders, but can be used for linear measurement.It also has A, B & Z). How can I reset the position for this 2 axis.
Regards
Manish Karnik

Hey I missed some point.
Hi All,
I am using PCI 7344 and UMI7774.I am using three of its Axis.The first two axis are just used as a DRO ( DIgital Read Out) and the third axis is used to control servomotor.
Now at a instant of time, I require to Reset all the axis position to zero.Now the third axis can be reseted by using the Reset Position Vi. But since the first two axis are manual, I have used scales which are used for linear movement measurement( The scales are same as encoders, but can be used for linear measurement.It also has A, B & Z). How can I reset the position for this 2 axis.
Now after reseting the position the axis should be able to read the counts from zero for all the axis. ( For axis 3 it is possible)
Regards
Manish Karnik

Lead time and Route time estimation used for deliveries

Dear Friends,
Can anybadyu let us know how to estimate lead time and route times for deliveries, and what is the exact meaning of the these two with differences
if possible can you please give me the configuration steps, as i know at this movement route times are maintained in the route and lead times are maintained in the material master MRP view.
what was these field impacts in the delivery..
requesting your view as soon as possible
Thanks
raju.

Hi there,
Lead time is the time in which the material will be available. It is called Replenishment lead time RLT. It is maintained in MRP view of material master. RLT can either be inhouse processing time for inhouse manufactured goods or order time + goods receipt processing time for externally procured goods.
Whereas time mentioned in route is used to calculate transit time during delivery scheduling. That is the time taken for the goods to reach customer from shipping point.
Both the times are imp for delivery scheduling.
When the customer places an order, if the material is not available, then the system will take end of RLT as material availability date. From that date, it will carry forward scheduling & propose a new confirmed delivery date.
Regards,
Sivanand

Neat Video & Rendering Times

Hi Guys,
I just got myself neat video for premiere, and I think it's a very effective denoiser. I was wondering if it's popular among the people here, and what king of rendering time are you getting with it on your systems? I'm applying it to a clip 90 minutes long, and I'm getting around 4 hrs. Does that sound normal?
Thanks!
Howard

Hi!
Do you use Neat on projects s long as 90 min? Could you tell me your approx rendering time? Thanks for the help!
Best,
Howard

Clarification on Account grouping -OMWN for 101 movement type

Hi SAP MM gurus,
In OMWN - Account grouping , I am not able to find any entry for 101 (Goods receipt for Purchase order B and with no consumption posting ) with Value and Quantity updates . There are entries for 101 movement type with special stock indicator but not able to find any entry for standard good receipt for Purchase orders ( No Special stock Indicator , Value and Quantity update checked , Movement type indicator B and No Consumption posting ). There are no issues with the accounting posting for goods receipt with standard purchase order with BSX being debited and WRX being credited. I am trying to understand the logic for this posting and I am not able to understand from where (customization settings) this posting is derived from. May I request your valuable inputs in understanding this logic.
Thanks in advance for your immediate response.
with regards,
Anandj

Hi there,
Not sure where you want to go... but here is a tip
Would it make sense to have value and qty update and no consumption ? it can either one or the other but not both.
Now in prg there are further checks that makes other option possible like a GR for PO that is not valuated.
Remember that these key determination behind the account grp / TE key is a kind of black box where the prg is hardcoded to sort out what keys to take.
I hope this helps... Cheers

CREATING CUSTOM WBDYNRO IVIEW IN ESS (ROLE), WORKING TIME ( AREA).

Hi Experts,
I Developed a webdynpro abap component, and now i should create an iview in ESS(ROLE),WORKING TIME (AREA), TIME SHEET(SUB AREA), So please provide me requried information show that i can finish this task, It will be very great full if you provide me the document with screen shot so that i can understand clearly .
Thanks & Regards
Bhushan.

Hi Bhushan.
After developing webdynpro abap component,
1.Applciation should be intergrated into portal under ESS -->working time(Area) so for any ESS related portal intergration are done from Home page are Framework(SPRO)Transaction code in (R/3)backend system.
2.There are step wise configurations to be made in SPRO>img>home page area framwork like
a.created applciation pcd location is to be added to the particular ess role where the page pcd is made copy and used in the configurtaions done at backend .
b.normal hoem page area has standard steps like define resourse add that resource to the service -->add service to the area of working time and then the portal gets effected with the changes of the back end
note:in the resource creation pass the url paramaets as = ROLES://pcd location of Your application
If you still Have the issue check on with sdn site ,or else reply back i try help you out with more details.
Thanks & Regards
AshwinChandraGirmaji

Which DVD are good for burning

I tried many different dvd/cd for burning movies and music, but they are not all working very well.
Does somebody knows which dvd are good for burning movies and music.

Hi Sue,
Thanks for your answer. I bought them also before, but it seems that not all working very good.
I burned dvd's and play them on my Home theather. Beginning good, later it gave reading problems. What I also know is: Dvd players from 40 euro's works better then one from 1600 euro's.
I shall buy the -R this week and hopefully the work better.
Ray

Can I export a .key to quick time if It has a .mov in already?

I have a nice .key presentation. one one slide is a qt movie. I have a recorded narration of the entire presentation.
in the .key slideshow, the .move file starts automatically at the slide transition
During the recording of the narration, when the .mov starts I turn down my mic volume while the .mov
plays, then I resume the narration when I click for the next slide.
when I export the .key file to quick time. the slide with the .mov does not play.
in the exported movie, I see the opening frame of the .mov.
after the period of time I waited for the .mov to play (when I recorded the narraton initially)
has ended and the next slide narration begins, then the .mov audio starts.
any solutions to get that .mov to play with the right timing?
Michael Reins

OK, I've pulled out the audio track. now trying to tackle the new imovie. what a monster!!!!!!
where can I find and old version, (just the previous would work, I search my disks) this new one is crazy. I'll be the rest of the day just trying to learn how to operate this bear.
still looking through help menu for the getting started material. found a pretty page, (apple is pretty often and nonsubstantive with written docs) with a getting started image, but no links and now wandering around trying to figure out imovie. maybe something at the bookstore!?! arrrgggghhh

How do I make simple movies for my website?

I would like simple movies to start playing when navigating between pages on my website. For example, I would like 3-4 movies to start playing simultaneously as thumbnails and clicking on the thumbnail would start the movie selected.
Is this possible?
Thanks

In general I say you can do anything you can think of with Flash, within the limits of the program, and your idea seems feasible. But the details of how you go about doing it are to broad to offer anything except to say to try getting it going and when you run into a problem making it work, post again with specifics of what you've tried and what is failing.

Rendering times are ridiculous for simple move of text

Similar Messages

Maybe you are looking for