Rendering with Audio

Hey I'm new too AE and i just made a ten second test clip with some plugins etc. Its at a 720 resolution. Ive rendered it using the Audio export box ticked and adobe exports it as 2 separate files. An audio (.wav format) and a video file with the required settings but without audio playback.
I use Adobe CS3 and my RAM is 4 GB on a dual core. On windows, These may not be required but just adding them..
Thanks
Ananth

Hey Thanks for your response
95% of the time it's better to use the Render Queue than it is to export. Get out of that nasty habit right now.
I did not export it. I rendered it using the "add to render queue" option.
make sure you have the sound turned on in the Output Module.
I did. It is after that that i have 2 files in the folder. An audio .wav file and the required .m4v file. But the .m4v file does have audio playback. It is just the video.
I have tried using different output modules like avi and i still get the same result. So why does Adobe separate the Audio and the Video? Am i missing something? Im sure im missing something.
Suggestions?
Thanks.

Similar Messages

Strange problem with audio (link inside)

Hello Community, please help me!
So I started this project where I film everything I do in the year 2014 and stuff.
Well, this week I began with doing the work in AE, so far so good.
I'm not finished yet, but I just wanted to try to render and upload it, for testing reasons. (with bad quality though) here's the link: https://vimeo.com/113597439
So... apparently there's every 11 seconds this clacking sound, I don't know how to get rid of it, it looks like it's a problem I have with AE rendering, because I tried to screencapture it and then convert it with the same software as I did with the AE outcome, it was fine. (but I obviously can't get a HD outcome by screencapturing my RAM-Preview). So it's not my converting tool!
And I don't know what it is and additionally, the sound is getting delayed, I'm not sure if it's because of the same reason the clacking sound is, because in my RAM-Preview everything is perfectly fine.
I'm using lossless with Audio checked on.
I would be super thankful if anybody could help!
Thanks in advance.

So I'm not hearing anything funky on my phone when watching the video. I do have one question though, this looks like a bunch of clips strung together with nothing special added to the clips so I'm wondering why you are using AE to EDIT when AE is a compositing and motion graphics application specifically designed to create short shots or sequences. I would do something like this in Premiere Pro. It will take you about 1/10 the time and it will render much faster.

Using GPU preview with AUDIO

Hello people!
I'm newbie here and dont speak english very well!
heheh so....sorry anything
well
Can I fast preview my composition with the GPU (OpenGL), but with AUDIO too?
Because when I preview from RAM, and there is a lot of effects, take too much time to render the video.....!
I want the speed of the GPU preview, with the AUDIO from RAM preview all in one!
heheh
that's it!
thankyou!

There are three ways to preview sound: RAM preview, manual preview (scrubbing) with audio, and audio-only preview. See this page for details:
http://forums.adobe.com/thread/423108
In general, the OpenGL preview in After Effects is only useful as a preview renderer, and most people only leave it on for the OpenGL - Interactive setting.
Using OpenGL for previews and renders is jsut about the last thing that you should be worried about.

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Importing P2 .mxf files with audio into AE CS4

I hope this isn't the ultimate newbie question but, I have been working with After Effects for a few months but haven't need audio until now. Is there a different process for importing/exporting with audio? I have brought in the P2 video file but I don't think there is audio attached to it. When I export to a QT file, there is definitely no sound? Am I doing something wrong?
Thanks in advance for any help.
Kevin

"FAQ: Why is there no sound (audio) in my output file?"
"FAQ: How can I play or preview sound (audio)?"
To make sure that you're importing the P2 audio essence files, follow the instructions here: "Import assets in Panasonic P2 format"

How do I connect an iPhone 5S or 6 with audio video cables?

How do I connect an iPhone 5S or 6 with audio video cables? Our van only has these connections. Apple did have a cable that worked with the 4/4S, but it does not work with an adapter on the 5S. I want audio only.

I Thought I probably was.
something like this should work then, right?
Belkin Y Audio Cable (12 foot) https://www.amazon.com/dp/B000067RBT/ref=cm_sw_r_awd_fYWzub11XY5MQ
OR
eForCity 3.5mm to RCA Auxiliary Cable Cord for iPod/MP3 https://www.amazon.com/dp/B0042DIZTE/ref=cm_sw_r_awd_R0Wzub1X33PD9
thx SO much )

Problem with audio and vga adapter in presentations

this is an odd problem. I potted a presentation that contained a qt movie. The video plays with sound just fine via the vga adapter until you plug in an external speaker system or earphone. the sound stops.
if you play a video outside keynote or play the video with out the video vga adapter or just unplug from the audio jack it works fine. am I missing something or is this a bug. For the life of me I can not figure out what the VGA in keynote has to do with audio.
John

Dr. John, this might be a little simple of an answer, but is the video jack pushed all the way in?
I had the same issue with my ipad playing a movie over a sound system and projecting it also, and discovered that the Apple issue iPad cover comes very close to interfering with the audio output jack, and that my plug into that jack wasn't all of the way in.
After that it's worked fine.

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

Mini DVI to HDMI with audio. Where can I find it?

I'm looking for a cable adapter (mini DVI to HDMI with audio) to my mac book air (2010). Where can I find it?

DVI and miniDVI only transmit video-signals but no audio-signal.
Regardless of the cable adapter you get (I don't have any recommendation) you always have to make a audio-cable connection between the MBA and the TV.
Stefan

Can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro

can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro, will it work?

Should work perfectly.

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
Good luck Derek

Any Mini DisplayPort to HDMI adapter with audio for macbook pro mid 2009

connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?
hello everyone.
if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
just please give me anything you can on this topic
thank you so much,

With a 2009 MacBook Pro, you need to use two connections to your TV: one for video and another one for audio. The miniDisplayPort on the 2009 models does not support audio, so you need a separate audio cable:
miniDisplayPort adapter for video - I use the Apple miniDisplayport-DVI adapter + a DVI-HDMI cable like this one
audio cable for audio - use a 3.5mm male stereo-to-2xRCA male cable like this one
Connect the miniDisplayport adapter + DVI/HDMI cable to your MacBook Pro's miniDisplayPort output and the HDMI input on your TV
Connect the audio cable to your MacBook Pro's audio out and your TV's audio in
The only potential gotcha is if your Hisense TV requires audio via the HDMI cable when you use an HDMI cable. The H3e user manual is unclear about this.

HT201938 connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?

hello everyone.
if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
just please give me anything you can on this topic
thank you so much,

These are user to user forums, your describing a serious hardware issue that needs to be serviced by Apple.
Good luck and I hope your issue gets resolved.

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver. I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. thanks

How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver? I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. There are 4 HDMI-in ports on the receiver - BD, DVD, DVR/BDR and audio. In my system preferences for sound, the receiver doesn't show up as an output option. Can anyone please advise. (ps, this is my first time posting a question, so I hope I can find your answers!) thanks, JP downunder

For sound, try the audio output port and connecting to the RCA audio input ports on your Pioneer receiver. Use something like this:
http://eshop.macsales.com/item/OWC/PODCONNECTOR/
Ciao.

Rendering with Audio

Similar Messages

Maybe you are looking for