Rendering Workspace Before Burning a DVD
When I first bring in video to the workspace and timeline I always render the workspace. This gets me nice smooth playback during the editing process and I get the nice green line in the timeline. After editing the green line turns to red so do I need render the workspace again, get the green line before burning the DVD? Does rendering the workspace have any impact on DVD quality?
As Steve points out, the Rendering is basically for viewing. When one calculates the time to Render, prior to Export/Share vs any timesaving, the total times should be a wash, or very nearly so. The quality will not be any different.
Good luck,
Hunt
Similar Messages
-
How do I create Themes/Chapters in my video before burning to DVD so that Scenes can be selected using on screen icons when DVD is loaded to player?
"I don't know what you mean by this. There are no chapter markers in FCP." - you puzzle me by this! Yave You ever made some DVDees after editing in FCP 7? Every chapter in the timeline could be transfered to DVD Studio Pro, and then used in DVD navigation. This is very important feature, decause you don't have to lookfor some parts of your video while creating navigation! Less work - more joy! Another downscore of FCPX!
-
I have some home videos that I have loaded onto my MacBook 10.6.8 but I cannot burn them because the file is too large and I am receiving a dropdown to that effect. Here is what I have done and what I need to know . . .
I opened IDVD
Clicked on Magic IDVD
Gave the DVD a title
I chose a Theme
Drug my movie from the Movie Folder into the Drop Movies Here bar and immediately . . .
Received a dropdown box that said . . . Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting inthe Project info window
I clicked OK
Then I went to the Project Tab in the IDVD Tool bBar to open that window
Once that window opened, I was lost and I need to know which settings to choose and how long the encoding takes - is the encoding complete only when the 'slide' box under the Encoding Tab at the bottom of the window is totally filled in or is it complete immediately upon choosing an encoding option?
The settings options are as follows . . .
Disc name: My title
Video Mode: NTSC or PAL
Encoding: Best performance, high quality, or professional quality
Aspect Ratio: Standard 4:3 or widescreen 16:9
DVD Type: Single-Layer (SL) - 4.2GB or Double-Layer (DL) - 7.7GB
Help - thanks,
Cactus FlowerYour project exceeds the maximum content duration. To burn your DVD, change the encoder setting inthe Project info window
So that is what you have to do:
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US -
Need HELP to burn 35 DVDs very URGENT !!!
I have created a 16/9 screen DVD, size 451 Mo.
Problem 1:
When I register it as Disk image, I cannot open it on my HD to preview before burn it. When I click on the icon, it says "specify application", so I put iDVD, but it doesn't open. So I burn my project directly from iDVD. It takes time. I need to burn 35!!! Is there is possibility to fixe it, or I have to encoder every time I have to burn the same DVD?
Problem 2:
When I burn my project to DVD-R x16 Verbatim, using "Optimal quality" or "Optimal performances", my quality image is suffering. Pixels are becoming too big (like 1mmx1mm mosaique), so it is difficult to read text and to see pictures. My original project is perfect. I thought I was DVD quality, because I was using DVD+R x16 verbatim. But it seems to be iDVD problem.
Thank to all who know anything about and can help. I have to deliver the project by the end of this week.Problem 1 Follow these directions:
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
Problem 2 Burn the disk image with Disk Utility and select a speed 4X or slower from the speed pop-up.
G4 DP 1.25 GHz 2GB RAM 4 Drives 770GB Mac OS X (10.4.6) 2 SuperDrives (SL 8X & DL 16X) -
I am using Snow Leopard and have created a movie in 16:9 format (SD not HDV) I created a movie which stays in the 16:9 format in fcp file, .mov fiule and MP4 file. I created an iDVD pane in 16:9 but when I play the movie in the iDVD preview window the iDVD pane switches to 4:3 and it burns the DVD in 4:3. How can I stop this so I get a16:9 DVD. Thanks for any help offered
James BowmanHi
As I see this I see two parts
• Howto go from FinalCut to iDVD
• Howto set iDVD right
In FinalCut Express (to 4) or Pro (to 6 - most probably 7 too)
• One has to set Anamorphic in the Browser window - menu columns
• Export as QuickTime movie .mov - NO QUICKTIME CONVERSION
In iDVD there are TWO places to set - WideScreen
- Start a NEW iDVD project - AND HERE SELECT WideScreen 16:9
- in Project - select Projectinfo
- now set WideScreen 16:9 - Here too
This use to work for me.
FOR FinalCut Pro-X - I have not a Clue - as I don't use it. SORRY
BTW - There is a good practice to before BURNING the DVD do
• Save as a DiskImage
• Test this by using DVD-Player tool
And if it is OK Size and All - then burn it by using
• Disk Util tool
• here set down burn speed to x4 or less (less burn errors = plays on more devices and better)
• Not using Memorex or NoName etc cheap media - as they usually DO NOT WORK as Video-DVDs
• I use Verbatim DVD-R as they play on more and even older DVD-players
Yours Bengt W -
Burn new DVD or copy existing DVD?
For reasons too stupid, ignorant and boring to go into, I have so far been deleting the imovieproject files after I have burned to DVD, retaining the DVDproject files.
I need to clear the 50 odd GB these take up. In case I need to make a copy of a DVD for family members, which gives the best quality - burning a fresh DVD from the dvdproject file OR simply making a copy of the DVD?So what I should have done is to trash everything BUT the iMovie!
only if you really need/want to to be able to edit the movies again, not if you just need to conserve space. And, as pointed out, having an iDVDproject without its accompanying media files is useless.
However, if you save your iDVD project as a 'disc image' you can save these image files and use them to burn more DVDs later with Disk Utility. If you are burning single-layer DVDs, they take up to 4.7 GB for a 2 hr movie, as opposed to the 30+GB for that same 2 hrs iMovie.
Many of us recommend doing the 'save as disk image' before burning the DVD the first time as a way to be sure the DVD project will come out all right.
Thus, you can have lots of these .img files and trash all the iMovies and iDVD projects and still be able to burn those DVDs at a later date.
I have saved most of my DVDs as their .img files on my external drive. I also export my iMovies to DV tapes to preserve them that way, waiting for the day when the current DVDs become obsolete and I will have to adopt a new media/method. -
I burned a DVD from imovie. All was fine, except the DVD dropped the sound at least three times. ???
Why does conversion from IMovie to IDvd result in periods of dropped audio ?
Hi
A. I do not use - "Share to iDVD" from within iMovie - but - Share to Media Browser and as Large (not HD)
B. My notes on this
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W -
A Question reguarding burning a DVD
I have made one dvd and am trying to make a second or third copy.
I have put the 2nd disk in and it goes thru all the stages of burning; all the way to finish recording. It spits out the disk and hangs here. It never asks if I want another copy.
Sometimes it will ask for another disk, and the drive just sits there and spins and then hangs up.
The disk is not a finished dvd. When you put it put in, the finder opens up IDvd, not a completed project.
IDvd just hangs, I usually have to force quit the application after a period of time.
Blank Disc: Maxell DVD-R 4.7 GB 16x
I volunteer at the church I go to and make DVD's of the Sunday Service. I usally make 3 copies.
I have used double layers recently and have not had this issue. [Memorex DVD+R DL 8.5GB 2.4x]
PowerMac G5 Mac OS X (10.4.8)Welcome to discussions, Red:
You might have an easier time making more than one copy by saving the project as a disk image and burning that.
(Thanks to Len Goff for the copy & paste)
File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
:)Sue -
I've burned my DVD as an img, how do I view it? I forgot .
I've made a disc image, how do I view my disk image.
This is for burning and viewing:
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and Tiger.
Double-click the .img file. You can use DVD Player to play the virtual disk (on your Desktop) to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006 -
Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?
Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control. -
I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, ScottHi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W -
I can't burn any DVD or CD - burning process interrupts before it ends
Hi everybody !
Sorry for my bad english, but I assume you're all aware about the frenches are not very good at english.
I've got the following problem: I can't burn any dvd or cd. I've already tried with different programs such as Sonic, Nero 7.0, and I Tunes, and I got every time a mistake wich interrupted the burning process before it ends.
So I don't know what to day ! I've already tried to re install the drivers, but it's didtn't change anything.
In order to help you, I've saved an error log from nero. I hope it could be helpfull to someone who could help me !
Here is the log:
moi
5C82001080000000000666822849
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <MAT****A DVD-RAM UJ-841S>Version: 1.60 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MAT****A DVD-RAM UJ-841S >Version: 1.60 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MAT****A DVD-RAM UJ-841S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvodka Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
MAT****A DVD-RAM UJ-841S D: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2045MB (2095084kB)
Free physical memory: 1277MB (1308144kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.9.2006
CD-ROM (ISO)
21:04:46 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:04:47 #2 Text 0 File Burncd.cpp, Line 3007
MAT****A DVD-RAM UJ-841S
SmoothLink activs
21:04:47 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
21:04:47 #4 Text 0 File Reader.cpp, Line 124
Reader running
21:04:47 #5 Text 0 File Writer.cpp, Line 113
Writer D: MAT****A DVD-RAM UJ-841S running
21:04:47 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
21:04:47 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media
21:04:48 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 318786 ( 70:52.36)
21:04:48 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
21:04:48 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: MAT****A DVD-RAM UJ-841S
21:04:48 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:04:48 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 318787 (318787) = #318787/70:50.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAT****A DVD-RAM UJ-841S]
21:04:48 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: MAT****A DVD-RAM UJ-841S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 653182976, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318787 | lead-out | 1 | 0x41 | 0x00
21:04:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1126
Removed 2 run-out blocks from end of track 1. Length: 318787 -> 318785.
21:04:48 #15 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
21:04:48 #16 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
21:04:49 #17 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
21:04:49 #18 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
21:04:49 #19 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 24x (3 600 Ko/s)
21:04:49 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:04:49 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: SmoothLink -> ON
21:10:08 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:10:10 #23 Phase 33 File dlgbrnst.cpp, Line 1724
Simulation completed successfully at 24x (3 600 Ko/s)
21:10:11 #24 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 24x (3 600 Ko/s)
21:10:11 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:10:11 #26 Text 0 File MMC.cpp, Line 21541
Set BUFE: SmoothLink -> ON
21:12:16 #27 SPTI -1040 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 76 C0 00 00 20 00 00 00
Sense Area: 0xF1 00 03 00 01 74 5D 0A 00 13 00 00 10
Buffer x03390000: Len x10000
0x72 F1 87 E5 D3 3D 4A 96 F9 B0 73 83 D3 14 72 A1
0xF3 49 6E 93 44 25 04 6D E5 CE 44 5F 3E C6 79 47
0xDD DD EA 3A FD 71 4D 32 CB 35 F3 DF 4B 18 BD 7D
21:12:16 #28 CDR -1040 File Writer.cpp, Line 302
Illegal block size for command
D: MAT****A DVD-RAM UJ-841S
21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:12:17 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:12:17 #31 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
D: MAT****A DVD-RAM UJ-841S
21:12:17 #32 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
21:12:17 #33 Text 0 File MMC.cpp, Line 16273
<MAT****ADVD-RAM UJ-841S > start Close Session
21:12:30 #34 SPTI -1040 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 13 00 00 10
21:12:30 #35 CDR -1040 File WriterStatus.cpp, Line 249
Illegal block size for command
D: MAT****A DVD-RAM UJ-841S
21:12:30 #36 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
21:12:30 #37 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
21:12:30 #38 Text 0 File MMC.cpp, Line 16273
<MAT****ADVD-RAM UJ-841S > start Close Session
21:12:30 #39 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 AA 00 00 30 05
21:12:30 #40 CDR -1046 File WriterStatus.cpp, Line 249
Illegal disc
D: MAT****A DVD-RAM UJ-841S
21:12:30 #41 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
21:12:30 #42 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 24x (3 600 Ko/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 11:03:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
So, thanks to you !
See you !
RomainHi
The error log doesnt provide any very useful information.
According to this error log the simulation was running correct but the burning process was not started.
In such case its very hard to say why it happens. Possibly the drive is damage and cannot calibrate the lens properly or you use not compatible medias.
The burning process depands also on the fiels and data which youwant to burn.
Some data, CD, DVDs are encrypted and its not possible to burn and to copy it.
In other case you could also try to burn the medias with lower speed and not with 24x.
But in worth case you the drive has a malfunction and you have to replace it ;( -
IDVD ejects dvd disc one minute early, before burning is completed. Why? What can I do to fix this?
iDVD ejects the dvd disc one minute early, before burning is completed. Why? What can I do to fix this? I have checked project via mapping and there are no problems with it. I have previewed the entire project and it runs fine.
Good morning,
There could be a few reasons why the burn doesn't finish. iDVD needs a lot of hard disk space to create the DVD -- 10-15 Gigs is starting to get low and under 5 G is virtually impossible. Reduce the load on your Mac by quitting other applications while you're trying to burn. Also, you may wish to break down your workflow into two steps (I do this routinely):
1) After you're satisfied in iDVD -- use the Save As Disc Image command rather than going directly to burn. This creates a virtual DVD which you can mount and play on your Mac.
2) Second step creates the physical DVD from the disc image. I use Roxio Toast to copy the disc image, but Apple's Disk Utility also works to burn the disc image. Use good quality discs -- Verbatim is often recommended; I've been happy with Sony DVD-R as well.
Here are more ideas: https://discussions.apple.com/message/11269202#11269202
John -
Turn Burn "verification" off before burning a CD/ DVD
What I love about OS X is that you can easily burn any CD/DVD without having to jump all the hoops and loops found in windows.
HOWEVER, there are times when I just want to turn off the data verification before a CD/DVD starts burning. I could simply hit the "X" and deal with all the other error and warning messages after it finishes... OR I could turn the data verification off before hand and have a smooth process...
I know that programs like Dragon Burn and Toast allow you to turn the verification off. However, I am not planing on spending $49-$99 just for that feature...
So, does anybody know how to do this without having to mess around the terminal too much.
ThanksSonicray wrote:
Thank you for the reply, I am not burning disk images, I am burning different documents, presentations, videos and audio.
I have used hdiutil before but there is no real point for me to build disk images out of my files if I am only going to use it once...
I was hoping there would be a check box or a shortcut key somewhere for turning the verification off...
I'm not aware of an option like this. it's probably not built into GUI at all. -
When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!
Hi
Try in iDVD
• Save as a DiskImage
• Play this by use of DVD-player tool
Still OK or problems ?
If OK - Burn it by use of
• Apple Disk Util tool - or -
• Roxio Toast™ (if You got this - I love it)
Yours Bengt W
Maybe you are looking for
-
IPlanet datasources and ArrayIndexOutOfBoundsException - ack!
Hello - I am encountering an annoying problem since deploying a module to iPlanet 6.0. On the line: ds = (javax.sql.DataSource) ctx.lookup(dsName); an ArrayIndexOutOfBoundsException is being thrown. There was no problem with ' ctx = new javax.naming.
-
Can Ipad air that was reset to factory setting be tracked?
Only have serial number. No sim card in it. But its LTE. UPS lost my package.
-
Difference between oracle 10g R1 and R2
hi, I would like to know is there are any difference betweeen oracle 10g R1 and R2. I am using forall condition in a select statement. The query is runnign fine in R2 and not in R1. Kinldy update. Rgds....
-
I am sure many of you here have enhanced 0FIAR_C02 or 0FIAR_C03 cubes, could you please tell me what new custom fields did you add and what was the business process behind it? FULL POINTS
-
Why does Foxfire crash when I try to open it and why does logging on to your email throw me to the general help page not the answer to my question?