Rendering
I have no idea why this is happening...
I am working with XD EX1 footage, its 1080 25p. When i am cutting stuff in the timeline, everything is fine. All until i start colour correcting or anything that then results in a red bar above the clip and the need for render.. After i render the clip, i then play it back in the timeline and what do i have? - A clip that is now TWICE as fast as the original clip and cuts to black half way through (obviously because of the weird time speed up during render?)..
This also happens if i don't render in the timeline and just click file>export>quicktime movie>current settings... i find the exported clip in finder, play it and low and behold the picture is sped up twice as fast, but the audio is normal speed...
This problem has also occurred when working with HDV footage and just about anything else..
Has anyone else experienced this? It's becoming a real pain as i work properly or use any addition effects or anything that requires rendering...i just want it to work..
Any help or insight is gratefully appreciated!!!
Fowler,
first impression is that some FCP preferences have gone crazy.
[Trash Preferences|http://www.digitalrebellion.com/pref_man.htm] (you can back them up with PM).
Empty trash and restart computer and FCP then try again.
L.
Similar Messages
-
How do I use my third computer with cloud. I am rendering a project in Avid Media composer
How do I get my third computer to work with when I am rendering Avid project on the other two computers computers
Hi,
Running creative cloud on third machine will prompt you for the deactivation from last 2 machines. As per EULA for Creative cloud you can only install and work on 2 machines only, be it MAC-MAC, MAC-windows and windows-windows.
working on third machine without deactivation from previous machines is not possible.
Hope this helps.
Thanks
Kapil Malik -
Is that a webkit rendering issue in Safari 5.1?
I add my voice to rendering issues encountered in Safari 5.1, here they are:
1) Fonts look pixelated on some websites. Here's an example drawn from weebly.
The font used here is OFL Sorts Mill Goudy, so I guess there must be a font rendering engine in weebly that allows non web safe fonts to be displayed properly. That works fine in Firefox 5 & 6, and until recently on Safari 5. Chrome 12 has exactly the same issue as Safari 5.1, so it could be a general rendering issue in webkit.
2) Videos on Vimeo show now a black rectangle instead of the video.
3) The "Insert image" feature in this forum takes forever to load, displaying a white rectangle during several seconds. Same issue with the Evernote clip bookmarklet.
Hope these issues will be fixed soon, any help is appreciated if something can be changed in Safari settings.
Note: resetting Safari (including cleaning cache) doesn't solve the described problems. I'm running Snow Leopard 10.6.8 on Mac Pro Quad 2.8 Ghz.Thanks for helping diagnose this.
However, my testing indicates that this is not a bug with border-collapse: collapse. Here is why:
If I change the value of border-collapse to "separate" and add "border-spacing: 0", the bug remains. To try this, request http://www.panlex.org/cgi-bin/plxu28-bug2.cgi .
If I leave the value of border-collapse unchanged but change the button elements in the cells to plain text, the bug disappears. To try this, request http://www.panlex.org/cgi-bin/plxu28-bug1.cgi .
On the basis of this testing, it would seem to me that the bug is dependent on the button elements and independent of the border-collapse CSS attribute.
This doesn't explain, however, why you have found border-collapse: collapse producing slow results with other large tables and it doesn't do so with my table in http://www.panlex.org/cgi-bin/plxu28-bug1.cgi . It also doesn't explain why you saw the bug disappear when you changed border-collapse on my page but I didn't see it disappear.
Any further diagnostic help would be welcome. -
Problem when rendering a report in BI Publisher deployed on Apache Tomcat
Hello for all.
First, I am going to tell you technical specifications about the software where I have deployed BI Publisher:
1. OS: Windows XP SP3
2. JDK and JRE: 1.6.0_24
3. Apache Tomcat: 5.5.33 (Set JVM Max Memory in 768MB)
4. BI Publisher EE: 10.1.3.4.1
I have deployed BI Publisher on Apache Tomcat without any problem, I uploaded Report files (both XDO and RTF), and I can see the reports in XML output format, but when I try to see the reports rendered by using the rtf file I have configured, BI Publisher shows me an Error; I checked the Apache Tomcat log and the following error is reported:
[042511_033325984][oracle.apps.xdo.common.xml.XSLTWrapper][ERROR] XSL error:
<Line 3, Column 123>: XML-22002: (Fatal Error) Error while processing include XSL file (rtf2xsl://http_//localhost:8080/xmlpserver/SubTemplates/sub-template-parameters.rtf?sid=1&eaf=3).
<Line 296, Column 18>: XML-22000: (Error) Error while parsing XSL file (null).
[042511_033325984][oracle.apps.xdo.template.FOProcessor][ERROR] End Memory: max=247MB, total=44MB, free=15MB
[042511_033325984][][EXCEPTION] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(Unknown Source)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:91)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:276)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:82)
at oracle.apps.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:552)
at oracle.apps.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:255)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:270)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:250)
at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:178)
at oracle.apps.xdo.servlet.XDOServlet.doPost(XDOServlet.java:201)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:647)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:94)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
at java.lang.Thread.run(Unknown Source)
Caused by: java.util.EmptyStackException
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
... 39 more
[042511_033325984][][EXCEPTION] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(Unknown Source)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:91)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:276)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:82)
at oracle.apps.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:552)
at oracle.apps.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:255)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:270)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:250)
at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:178)
at oracle.apps.xdo.servlet.XDOServlet.doPost(XDOServlet.java:201)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:647)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:94)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
at java.lang.Thread.run(Unknown Source)
Caused by: java.util.EmptyStackException
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
... 39 more
I checked that the url http://localhost:8080/xmlpserver/SubTemplates/sub-template-parameters.rtf would be accesible via Internet Explorer, and It is accesible.
I am glad if you can tell me what could be the cause of the error.
Thanks.Finally, I stop working in the implementation of BIP over Apache Tomcat; I installed OC4J 10.1.3.5.0 (standalone installation) and I deployed BIP on it.
It seems the error I wrote in last post has been fixed, but actually I am obtaining the following error with the deployment on OC4J:
[042711_055706687][][ERROR] Namespace 'http://www.oracle.com/XSL/Transform/java/
oracle.com.xmlpublisher.reports.BIPExtension' failed Secure Java Extensions chec
k.
[042711_055706687][oracle.apps.xdo.template.FOProcessor][ERROR] End Memory: max=
494MB, total=46MB, free=21MB
[042711_055706687][][EXCEPTION] oracle.apps.xdo.XDOException: XSLT10gR1: Failed
Secure Java Extensions check.
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.j
ava:91)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:276)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.
java:82)
at oracle.apps.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:552
at oracle.apps.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.ja
va:255)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:270)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:250)
at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:178)
at oracle.apps.xdo.servlet.XDOServlet.doPost(XDOServlet.java:201)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterC
hain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilt
er.java:94)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:644)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:391)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequ
estHandler.java:908)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:458)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpReque
stHandler.java:226)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:127)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:116)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSo
cketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:662)
[042711_055706687][][EXCEPTION] oracle.apps.xdo.XDOException: XSLT10gR1: Failed
Secure Java Extensions check.
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.j
ava:91)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:276)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.
java:82)
at oracle.apps.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:552
at oracle.apps.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.ja
va:255)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:270)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:250)
at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:178)
at oracle.apps.xdo.servlet.XDOServlet.doPost(XDOServlet.java:201)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterC
hain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilt
er.java:94)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:644)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:391)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequ
estHandler.java:908)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:458)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpReque
stHandler.java:226)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:127)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:116)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSo
cketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:662)
May you know the cause of the error above?
Thanks, -
Rendering problem in output of Pages 5.1
Has anyone else seen a print rendering problem when trying to print a table in Pages 5.1?
All my text in tables is jagged and lower-resolution than other text:
(Printed from Pages 5.1 (1769) on a HP Color LaserJet CP2025 from a retina MacBook Pro original model running Mavericks 10.9.1.)
To see the problem, you must look at the full size image. Right-click to open it in a new tab.
The type is set to Helvetica 12 pt black.
The borders are set to 0.5 pt black. The top two lines have a border on all sides.
The top line's border is nearly invisible; on the full size image you should see a faint blueish line.
The middle line's box box is supposed to be
 a full box, but it is missing two sides. But at least this hairline renders properly.
The pdf of the same file looks fine on screen, even at high magnification. The problem only shows up in print.
The same problem exists in Numbers (where I first experienced it):
https://discussions.apple.com/message/24695801#24695801I see you followed Jerry's advice to post over here, and haven't got any responces, so I'll at least try to get a little more information into the discussion.
Since the document prints to pdf correctly, but not to the actual printer, it seems likely that it is a print driver issue. In the Numbers discussion on the issue, the original person with the issue was using a HP printer with a postscript driver. Since the HP support site was not very clear about whether a driver for that printer on Mavericks even existed, and the recommendation for a generic driver was for a PCL driver, not postscript, I suspect that they were not using a recommended configuration. It would probably be helpful to know the details about your printer and print driver.
Do you have access to more than one printer to test this on?
The new versions of Numbers and Pages are doing something strange in terms of how they copy tables to the system clipboard; the pdf version is no longer available, only bitmap images. Print to pdf, however seems to still get the pdf data. I don't think this should have anything to do with the data getting to the print driver, but it does seem consistent with your results. -
JSF Pages are not rendering correctly when loaded using Non JSF actions
Hi All,
This problem is irritating me and I am posting the same query for the third time here.
When I come from non jsf actions such as page submitting using Javascript, clicking anchor link, clicking normal Html submit button and so on my page is not rendering correctlly .
In other words, My first GET method/Post method works perfectly for the first time when the page is loaded.
But when we try to access the page for the second time, although logical work is perfect in bean, I am getting same old page.
How to resolve this issue?
or
Is this Bug of Sun's Implementation of JSF Framework.
Thanks,
SudhakarHi Sudhakar,
There is a discussion about refreshing a page, Take a look at the below thread
http://swforum.sun.com/jive/thread.jspa?threadID=55660
Hope this what you are looking for
MJ -
Non-English fonts not rendering correctly in iMovie 10.0.3?
I use xenotype Tibetan font in iMovie and it has always rendered correctly until I updated from 10.0.2 to 10.0.3. Now many of the stacked characters do not render correctly in any of the titles. Even projects that I made three months ago with 10.0.2 when opened in the new version render the font incorrectly. Is there a reason for this change? Is there any adjustment I can do? Line-height adjustment? iMovie 10.0.3 seems to be the only Mac software currently made by apple that doesn't render the font correctly.
Hello,
Welcome to the discussions. There have been some transition problems reported, although maybe not so many problems as you are experiencing.
I had the black/flash with the transition cross-dissolve in one of my movies recently. I found the suggestions in this thread to resolve that: http://discussions.apple.com/message.jspa?messageID=3842119#3842119
Have a look and see if it can help you. -
Hi,
I've used the default PHP installation on OSX with no problems in the past (after uncommenting the 2 lines in httpd and enabling Personal Web Sharing), but after a recent reinstallation of the operating system (having re-updated all software) PHP refuses to render. HTML files render fine, but when I load up a PHP file, its source is displayed instead of being properly rendered. I like to think I know what I'm doing, but I'm befuddled :/
Any help would be much appreciated.
Here's my httpd.conf, if it helps:
<pre>
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:<a class="jive-link-external-small" href="http://">http://httpd.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
ServerRoot "/usr"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USEFCNTL_SERIALIZEDACCEPT or
# USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#LockFile "/private/var/run/httpd.lock"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile "/private/var/run/httpd.pid"
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile "/private/var/run/httpd.scoreboard"
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig /private/etc/httpd/srm.conf
#AccessConfig /private/etc/httpd/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 5
MaxSpareServers 10
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 5
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.so
#LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
#LoadModule env_module libexec/httpd/mod_env.so
LoadModule configlogmodule libexec/httpd/modlogconfig.so
#LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
LoadModule mime_module libexec/httpd/mod_mime.so
LoadModule negotiation_module libexec/httpd/mod_negotiation.so
#LoadModule status_module libexec/httpd/mod_status.so
#LoadModule info_module libexec/httpd/mod_info.so
LoadModule includes_module libexec/httpd/mod_include.so
LoadModule autoindex_module libexec/httpd/mod_autoindex.so
LoadModule dir_module libexec/httpd/mod_dir.so
LoadModule cgi_module libexec/httpd/mod_cgi.so
LoadModule asis_module libexec/httpd/mod_asis.so
LoadModule imap_module libexec/httpd/mod_imap.so
LoadModule action_module libexec/httpd/mod_actions.so
#LoadModule speling_module libexec/httpd/mod_speling.so
LoadModule userdir_module libexec/httpd/mod_userdir.so
LoadModule alias_module libexec/httpd/mod_alias.so
LoadModule rewrite_module libexec/httpd/mod_rewrite.so
LoadModule access_module libexec/httpd/mod_access.so
LoadModule auth_module libexec/httpd/mod_auth.so
#LoadModule anonauthmodule libexec/httpd/modauthanon.so
#LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
#LoadModule digest_module libexec/httpd/mod_digest.so
#LoadModule proxy_module libexec/httpd/libproxy.so
#LoadModule cernmetamodule libexec/httpd/modcernmeta.so
#LoadModule expires_module libexec/httpd/mod_expires.so
#LoadModule headers_module libexec/httpd/mod_headers.so
#LoadModule usertrack_module libexec/httpd/mod_usertrack.so
LoadModule logforensicmodule libexec/httpd/modlogforensic.so
#LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
LoadModule setenvif_module libexec/httpd/mod_setenvif.so
#LoadModule dav_module libexec/httpd/libdav.so
#LoadModule ssl_module libexec/httpd/libssl.so
#LoadModule perl_module libexec/httpd/libperl.so
LoadModule php4_module libexec/httpd/libphp4.so
LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule modvhostalias.c
#AddModule mod_env.c
AddModule modlogconfig.c
#AddModule modmimemagic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
#AddModule mod_status.c
#AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
#AddModule modauthanon.c
#AddModule modauthdbm.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule modcernmeta.c
#AddModule mod_expires.c
#AddModule mod_headers.c
#AddModule mod_usertrack.c
AddModule modlogforensic.c
#AddModule moduniqueid.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_dav.c
#AddModule mod_ssl.c
#AddModule mod_perl.c
AddModule mod_php4.c
AddModule modhfsapple.c
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
Port 80
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group "#-1" on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#ServerName new.host.name
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/Users/borischerny/Sites"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Users/borischerny/Sites">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
# Apple specific filesystem protection.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<Directory ~ ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</Directory>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /private/etc/httpd/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The modmimemagic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# modmimemagic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include modmimemagic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule modmimemagic.c>
MIMEMagicFile /private/etc/httpd/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/private/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "/private/var/log/httpd/access_log" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog "/private/var/log/httpd/referer_log" referer
#CustomLog "/private/var/log/httpd/agent_log" agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/private/var/log/httpd/access_log" combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut /
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
Alias /icons/ "/usr/share/httpd/icons/"
<Directory "/usr/share/httpd/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This Alias will project the on-line documentation tree under /manual/
# even if you change the DocumentRoot. Comment it if you don't want to
# provide access to the on-line documentation.
Alias /manual/ "/Library/WebServer/Documents/manual/"
<Directory "/Library/WebServer/Documents/manual">
Options Indexes FollowSymlinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/Library/WebServer/CGI-Executables">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-TW .zh-tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#AddType application/x-compress .Z
#AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phfabuselog.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "/private/var/run/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *:80>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
</pre>sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
<pre>
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
</IfModule>
</pre> -
Datagrid Image Renderer Broken in CS SDK but not Flex project
Within a Photoshop Extension, I have a DataGrid which has an inline custom image renderer whose dataprovider is an ArrayCollection called "photos" representing a list of photos and some metadata properties. One of the properties "fileName" is concatenated with a path to a thumbnail image such as source="{'LR_AUTO/imported/thumbs/' + data.fileName}".
The dataprovider is bound to a LCDS DataService. When the extension is first launched, the dataservice initializes the dataprovider with the existing values for the "photos" arraycollection. The thumbnail images are correctly shown.
However, when the DataService receives a new row and updates the photos dataprovider, the datagrid's new row shows a broken image for the thumbnail even though the path is correct. I have dumped the photos dataprovider and verified that all information is correct. When I close Photoshop and relaunch it from Flash Builder, once again LCDS initializes the photos ArrayCollection and THEN the thumbnail that previously showed as broken show up correctly.
I have a ColdFusion Directory Watcher Gateway that watches a directory where Lightroom auto-imports images from a tethered capture session. When the camera sends Lightroom a new image, the new image is processed by Lightroom and moved to a target directory, and since ColdFusion's Directory Watcher is watching that targeted directory, ColdFusion will create a thumbnail image in a subfolder and notifiy LCDS that of the new image and related metadata.
*** This is the interesting part *** When Lightroom places new images in the target directory, this is propogated to the Photoshop Extension's datagrid, and the new row shows up as described earlier, showing a broken image for the thumbnail. BUT, instead of Lightroom, if I manually copy images to the folder where ColdFusion is watching, then exact same code path is exectuted and in the Photoshop Datagrid the new row appears and THE THUMBNAIL IMAGE shows up correctly.
The difference seems to be only in how the images are put in the original target location. The problem is when Lightroom puts them there, but it works when I put them there as a user.
*** More Interesting Info *** I have the Flex code for the Photoshop Extension duplicated in a standalone, non-CSSDK project using Flex 3.4 which I launch in a browser. I have mirrored the code in the Photoshop extension, but in this manner, the problem does not exist. With plain Flex 3.4 in a browser, whenever LCDS notifies the datagrid of a new photo record, the datagrid's new row ALWAYS shows the thumbnail correctly.
A primary difference in how the thumbnail image is rendered is that in a browser, the Flex 3.4 project accesses the image assets over the network, however, in the Photoshop Extension, the image asset WITH THE SAME RELATIVE PATH is accessed over the local file system.
source="{'LR_AUTO/imported/thumbs/' + data.fileName}"
So in the case of the browser, this path is a relative URL and the image is retrieved over HTTP, however, in the PS Extension, the same path represents a file system path relative to the project folder.
Unfortunately, because the Flash Player (including APE) cannot access BOTH the network and the local filesystem, so I cannot change the Extension to use network access.
** The important part to remember is that when I stop the Flash Builder debug session and close Photoshop, then relaunch the debug with Photoshop, then all the images show up correctly in the Extension.
Your advice is appreciated.
Thank you!
Steve
====================================================
Environment
====================================================
Photoshop CS5 Extended 12.01 x32
Flash Builder 4
CS SDK 1.02
Extension Builder SDK 3.4
MacBook Pro / OS X 10.5 / Intel Core 2 Duo 2.66 GHz / Procs: 1 / Cores: 2 / Memory: 8 GB
App configured for Photoshop CS5 and Photoshop CS5 Extended
====================================================
NewsAgencyPhotoshop.mxml
====================================================
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns="com.stevenerat.news.*"
horizontalScrollPolicy="off" verticalScrollPolicy="off" verticalGap="0"
layout="vertical" horizontalAlign="left" backgroundColor="#353535"
historyManagementEnabled="false"
creationComplete="init();">
<mx:Script>
public function handlePhotoClick(data:Object):void {
this.PreviewImageWindow = PreviewImage(PopUpManager.createPopUp(this,PreviewImage,true));
var filePath:String = data.dirPath + data.fileName;
PreviewImageWindow.addEventListener("imageOpenEvent",imageOpenListener);
PreviewImageWindow.addEventListener("imageCloseEvent",imageCloseListener);
PreviewImageWindow.addEventListener("imageSavedEvent",imageSaveListener);
PreviewImageWindow.setFileName(data.fileName);
PreviewImageWindow.setFilePath(filePath);
PreviewImageWindow.y = 0;
PreviewImageWindow.x = 0;
]]>
</mx:Script>
<mx:ArrayCollection id="photos"/>
<NewsPhoto/>
<mx:DataService id="ds" destination="NewsAgencyPhotos" autoSyncEnabled="true" autoCommit="true" conflict="conflictHandler(event)"/>
<mx:Label text="News Agency Photos" fontSize="20" paddingBottom="30"/>
<mx:Label text="Available Images" fontSize="15"/>
<mx:DataGrid id="photoIPTC" dataProvider="{photos}" editable="true" width="220" rowCount="5" rowHeight="75" wordWrap="true">
<mx:columns>
<mx:DataGridColumn headerText="id" dataField="fileName" width="40" editable="false" sortDescending="true"/>
<mx:DataGridColumn dataField="psLock" width="65" headerText="Status" editable="false" editorDataField="value">
<mx:itemEditor>
<mx:Component>
<mx:ComboBox editable="false">
<mx:dataProvider>
<mx:String>New</mx:String>
<mx:String>Open</mx:String>
<mx:String>Edited</mx:String>
</mx:dataProvider>
</mx:ComboBox>
</mx:Component>
</mx:itemEditor>
</mx:DataGridColumn>
<mx:DataGridColumn headerText="Photo" dataField="fileName" width="80" editable="false">
<mx:itemRenderer>
<mx:Component>
<mx:HBox horizontalAlign="center" horizontalScrollPolicy="off" verticalScrollPolicy="off">
<mx:Image click="outerDocument.handlePhotoClick(data);" source="{'LR_AUTO/imported/thumbs/' + data.fileName}" width="75" height="75"/>
</mx:HBox>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
</mx:columns>
</mx:DataGrid>
</mx:Application>
====================================================
A DUMP OF THE DATAPROVIDER
in this case, one array item existed when launched, then a second was added
while running. The first has its thumbnail show, the second item has broken image
====================================================
------------------DUMP----------------------------
(mx.collections::ArrayCollection)#0
filterFunction = (null)
length = 2
list = (mx.data::DataList)#1
fillParameters = (Array)#2
length = 2
localItems = (Array)#3
[0] (com.stevenerat.news::NewsPhoto)#4
aperture = "F10"
cameraLens = "EF24-70mm f/2.8L USM"
cameraModel = "Canon EOS 7D"
city = ""
copyrightNotice = "© Steven Erat 2011"
country = ""
creator = "Steven Erat"
description = ""
dirPath = "/Users/stevenerat/LR_AUTO/imported/"
fileName = "ERAT_STEVEN_20110122_162.jpg"
focalLen = "42.0 mm"
headline = ""
id = 1
iso = "100"
keywords = "Alt, Dramatic, Fashion, Girl, Glamorous, Glamour, Inked, Model, Portrait, SOPHA"
psLock = "New"
shutterSpeed = "1/128 sec"
state = ""
[1] (com.stevenerat.news::NewsPhoto)#5
aperture = "F10"
cameraLens = "EF24-70mm f/2.8L USM"
cameraModel = "Canon EOS 7D"
city = ""
copyrightNotice = "© Steven Erat 2011"
country = ""
creator = "Steven Erat"
description = ""
dirPath = "/Users/stevenerat/LR_AUTO/imported/"
fileName = "ERAT_STEVEN_20110122_163.jpg"
focalLen = "42.0 mm"
headline = ""
id = 2
iso = "100"
keywords = "Alt, Dramatic, Fashion, Girl, Glamorous, Glamour, Inked, Model, Portrait, SOPHA"
psLock = "New"
shutterSpeed = "1/128 sec"
state = ""
uid = "8BAC025E-60D1-11F1-3654-44BDB0D218CE"
view = (mx.collections::ArrayCollection)#6
filterFunction = (null)
length = 2
list = (mx.data::DataList)#1
sort = (null)
source = (null)
sort = (null)
source = (null)
------------------END_DUMP------------------------I expected that if my extension uses the local filesystem AND the network that I would get a Security Sandbox Exception as I recently described in this thread:
http://forums.adobe.com/thread/791918?tstart=0
However, I just tried changing my datagrid image renderer to access the thumbnail via HTTP and the thumbnail issue after Lightroom export does not happen.
<mx:DataGridColumn headerText="Photo" dataField="fileName" width="80" editable="false">
<mx:itemRenderer>
<mx:Component>
<mx:HBox horizontalAlign="center" horizontalScrollPolicy="off" verticalScrollPolicy="off">
<mx:Image click="outerDocument.handlePhotoClick(data);" source="{'http://localhost:8500/LR_AUTO/imported/thumbs/' + data.fileName}" width="75" height="75"/>
</mx:HBox>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
Furthermore, I can also open the image via the Photoshop DOM, and it does open correctly. It seems that I do have a solution now, although I'm not certain as to why I'm not getting a Security Sandbox Exception as I described in the other post.
Thanks for reading. -
Adobe Photoshop CS6 Very Slow On Rendering Type
I have a notebook with specification as mentioned below :
Lenovo Ideapad Y470P
2nd generation Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB)
Windows 7 Ultimate x64
AMD Radeon HD 7690 2GB
8.0GB PC3-10600 DDR3 SDRAM 1333 MHz
750GB 5400
I'm using Adobe Photoshop CS6 (64 Bit) for doing my job.
Right now, i have a task to create a banner with dimension 800 x 900 Centimeters with Resolution 300 DPI and Color Mode RGB 16 Bit.
The file size when blank is about 56.1 GB.
The problem is, when i add some text with Horizontal Type Tool and click on the Move Tool, the Rendering Type screen show up and take a very very long time to finished.
I have made some configurations to my Photoshop that i found on Adobe Forum, but the problem still persisted.
Some configurations that i've made is :
- Turn off the Automatically Save Recovery Information
- Set Maximize PSD and PSB File Compatibility to Ask
- Set the Memory Usage to 95%
- Set the Cache Levels to 8 and Cache Tile Size to 1024K
- Set the Graphics Advanced Settings to Drawing Mode Advanced, and Check the option Use Graphics Processor To Accelerate Computation, and Uncheck the option Anti-Alias and 30 Bit Display
- Set the Scratch Disk to another partition ( C:System D:PageFile E:Data F:Scratch Disk)
And after all of that configuration, my Photoshop still slow when Rendering Type.
Could you give me some tips to solve my problem?
Thanks300 ppi for a banner that size is categorically not normal. Guaranteed.
Get specific instructions from the shop that is going to print it.
You keep confusing ppi with dpi. The resolution of an image file really is expressed in ppi, pixels per inch, not "dpi" which is dots per inch. The precise terminology is as follows:
DPI = Dots per inch = units used to measure the resolution of a printer
LPI = Lines per inch = The offset printing 'lines' or dots per inch in a halftone or line screen.
PPI = Pixels per inch = the number of pixels per inch in screen/scanner file terms.
Here's a link to a discussion that may interest you:
http://graphicdesign.stackexchange.com/questions/487/what-ppi-should-a-large-format-artwor k-for-print-be-done-at
It includes the following chart and subsequent comments :
"The rule of thumb is that we need 1.5 to 2 times the LPI in PPI to get acceptable results.
"Viewing Distance Present Study
20 feet greater than 10 LPI
18 feet 18.75 LPI or greater
16 feet 18.75 LPI or greater
14 feet 37.5 LPI or greater
12 feet 37.5 LPI or greater
10 feet 50 LPI or greater
8 feet 65 LPI or greater
6 feet 85 LPI or greater
4 feet 100 LPI or greater
2 feet 133 LPI or greater
1 foot 150 LPI or greater
6 inches 150 LPI or greater
"Presumably, for a banner 3m x 5m, you'd be standing at a minimum of, say, 10 feet. (Just eyeballing the wall here.) So, by this table, you'll need 50 LPI minimum. That would mean your raster graphics should be about 100 PPI, or 75 PPI at 12-14 feet. Considering that and the fact that 2x LPI is pretty conservative for reproducing fidelity (often 1.5xLPI is "enough"), this agrees with [the given] advice of 75 PPI being acceptable."
Talk to your printer. I suspect they will want a file at under 75 ppi, or even much less. Follow the printer's advice/request. -
Adobe Photoshop cs4 - Really slow rendering ?
Hello all,
I have recently started using Photoshop at home again as needed for a course assignment and i have noticed how slow the rendering has gone!
It takes approximately 4minutes to save a .TIFF or .PSD file now and/or even takes 1/2minutes in order to resize a layer?
I am not sure what the problem is, but it also does it on Photoshop CS5 in my college. Is it my files causing this error?
My mac in general has been looked after, and is in immaculate state, therefore i do not believe the hardware is causing the problem.
Any help is deeply appreciated!
Thanks,
Jesse @ pca.ac.ukIm thinking it could be my harddrive, its a new one since.
Could this be why?
Chris Cox wrote:
Could be large files
I doubt it, I have dealt with larger files before and i had never had this problem!
lack of RAM
Mines 4gb, if remember correctly. It's the latest Imac with dual core 500gb hd and was it 2gb?
Either way, my imac does not seem to be handling anything else at a slower rate, it is just photoshop. Bridge was working perfectly when i created a pdf for my presentation!
slow disk
Is this my Hard drive you're talking about as mentioned above?
All the work is saved on my Seagate external/portable hard drive. And said before, i think i have been experiencing problems with it since using it? Is that possible. If so, it might actually explain my problems during college too.
bad utility software (antivirus keeps biting people on file IO), etc.
could you explain more about this? Any ways of making sure it was this being the problem? IO?
Oh, and in some cases it can be caused by third party plugins (FontAgentPro had a bug like that).
Since owning this version of photoshop, i havent actually had the need to download any plugins. because i also on a pc with cs3. -
Adobe Media Encoder pausing rendering while working in Premiere Pro
Hello everyone,
So I am redering a video in Adobe Media Encoder and at the same time I am editing a new one in Premiere Pro.
I noticed that AME is constantly pausing the rendering and did not know why. It turns out that while I'm editing a video in Premiere Pro, I am constantly pressing the space bar to start/pause the video I'm editing. While I do that, AME keeps pausing/unpausing the rendering. Somehow, pressing the space bar in PP has an effect in AME.
I have no clue why it does that because the Premiere Pro window has the focus, not the AME one.
Has anyone ever seen that?
I use Windows 8 and Adobe CC.Hi Rallymax,
Yes I do queue footage by having an Autowatch set up on the directories where the video is written to. I rarely do a direct export unless testing new settings.
Don't take this as gospel but I too had a feeling that GPU acceleration didn't happen with AME, only direct export. Not sure where that came from, I did watch some of the recent Adobe TV Web Seminar's about new features of CC products etc, so maybe on one of those?
I found this while trying to find out where I had seen it but it is from AMD site not Adobe so whether it's fully 100% correct I dunno:
Adobe Media Encoder
The Adobe Media Encoder (AME), with support for OpenCL™ and GPU acceleration, automates the production of multiple encoded versions of source files, sequences, and compositions in Premiere Pro CC. With the GPU-accelerated AME and AMD graphics technology, editors can quickly encode projects and output files for virtually any destination. AMD GPUs handle the heavy lifting, freeing the system’s CPU to perform other functions.
I will try the same test as Jason, if I can find any AVHCD video and see what the results are. Will be interesting. -
Adobe Media Encoder renders in Lossless, such as After Effects?
Adobe Media Encoder renders Lossless like After Effects too?
There are multiple codecs that can losslessly encode video. One example is the PNG video codec in a QuickTime container. Another example (which matches the After Effects output module named Lossless) is the Animation video codec in a QuickTime container.
-
Unable to Capture more than 5 mins, error out of mem msg when rendering
Somebody help me. I have been using my powermac fcp and a mini dv cam for 4yrs no problems. Now when i am trying to capture clips over 5 mins (1 gig) fcp freezes. So Im capturing through Imovie (which is working fine). Dragging clips into fcp to edit. Now when it comes to rendering anything over 5 mins Im getting an error out of memory msg.
Can anyone help me?You don't say what version of FCP you are using but my guess is you've upgraded QT7 and are running FCP4.5
If that's the case, do a search here for the solution(s). They're ugly.
good luck,
x -
Unable to watch rendered video
I can watch video in real time preview on out monitor but unable to watch rendered video. It is just like a unsynchronized video. What may be the cause?
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840 -
Error during rendering/encoding -- PLEASE HELP!!
Hey everybody!! After trying twice to burn this project to DVD, I'm about ready to rip my hair out!! First of all, here's the specifics about my computer:
Mac OS 10.3.7 / 800 MHZ Power PC G4 / 256 MB SDRam / My programs are iMovie 4 and I have iDVD5
OK, I'm trying to burn a movie that is about 1 hour, 23 minutes long. Even though my movie is not 90 minutes long, iDVD does tell me that it is too long and that I need to click on "Best Performance" in my iDVD Preferences. No problem, I did that. (By the way, at the time of the burning, I have about 5.1 GB on space left on my hard drive.)
Before burning I do repair permissions and delete my "com.apple.idvd.plist".
So, it burns and burns for roughly 6 hours. Right at the very end, the disk spits out and an error message comes up saying:
Encoding Video
Error during rendering/encoding:
This is very frustrating because I need to get this video done by tonight and turn it in by Monday morning!!
Any suggestions?? Please help!!! Thanxx!!I have about 5.1 GB on space left on my hard drive
I don't think that's enough. Remember a DVD is 4.7GB (which iDVD first stores on your hard drive) plus temporary files that iDVD needs.
Maybe you are looking for
-
How to raise invoice against a service order
I would like to raise multiple invoices against one service order. is it possible. i assume service order as a service contract. how to do it Thanks
-
How do I transfer $ from one AppleID account to another?
I have an old non-email address AppleID set up with a iPod Touch. I now have a iPad that has an email address AppleID. There is money in each of these accounts. I generally use the iPod for music and the iPad for apps, Internet browsing, email on
-
Help! I am looking for a Visual Basic to Java Converter. Can anyone recommend a good site, product or resource?
-
Error when uploading a crystal report with dynamic parameter into Infoview
Hi All, I was trying to upload a crystal report which has a dynamic parameter into a Infoview. It shows an error message that say:- "Failed to read data from report file C:\WINDOWS\TEMP\tmp27A.rpt. Reason: Failed to read parameter object ". Can anybo
-
Using generics and J2SE together with JSF
Hi Has anybody experience with using JSF together with J2SE 1.5? Especially generics? I would like to use generics and other improvements from J2SE in the model objects. Thnaks in advance ... Rick