RENDERS DO NOT MOVE?

Has anyone else noticed this...?
FCP 5.X...
Create a long timeline, say over 2 hours. Have many renders of transitions throughout the timeline, between clips. After editing is complete, I insert a 3 minute clip at the beginning of the timeline, pushing all the clips down and there are "ghost" renders along the timeline afterwards?
Transitions that were laid between 2 clips, appear in the middle of a solid clip? The original effect still appears between the 2 clips but the spot on the timeline that they originally were, do not move? A small blue line (rendered area) appears within the solid clip and playing through that area shows the transition that should have moved 3 minutes down the timeline.
Never seen this behaviour before but have noticed it on about 3 projects lately.
Trashing all the original RENDER files and re-rendering the entire timeline fixes the problem, but it's very annoying.
Any insight would be appreciated!
Thanks,
Darren
Mac OS X (10.3.8)

Sounds really odd, never seen it leave the old icons, but have had ghost media playback... it's a corrupted sequence that does this usually.
If you're getting a lot of these, It's probably time to rebuild your startup disk...
Jerry

Similar Messages

OSX Yosemite: I can not move the icons on my display. They always jump to an other position

Hello,
I updated my OS X to Yosemite last week.
First problem: Since then, I can not update several applications any more. Yestersday, there where 5 updates: iMovie, iPhoto, Keynote, Pages and Numbers. iMovie and iPhoto updates were ok, but for the other 3 I received a message ""Update Unavailable with This Apple ID.This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled"". As far as I know, I was never refunded, or I never cancelled an app that was originating from Apple. I even don't know how to di it !!
Second problem: I can not move any more the icons on my display. And sometimes thy are moved to an other position after start. For example: the Mackintosh HD and the external Time-Maschine HD were always in the right upper corner on the display. This morning, after starting, they were in the left lower corner!! No way to slide them back to the other side. They always jump back to the lower left.
HEEELLLPPP !!

Hello,
Performance tip: Keep the Desktop clutter-free (empty, if possible) by: Klaus1
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Keep your Desktop as clutter free as possible!
Carolyn

In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?

FCPx answer: At least the answer that worked for me...
I had the same problem, as I believe many others had.
In my case the problem was with one of OSX Mavericks' new features: APP NAP.
It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
I just disabled App Napp on FCPx and now it works, again, like a charm.
This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
I hope this helps,
Mariano

IPhoto can not find several photos, shows icon, but not pic itself and I did not move anything

I have more then 12'000 photos on iPhoto. After the last update it shows me all pics in the small icons, but when I click on them, severals are not whown - a black background with a grey triangle opens and a "!" in the mid. I suppose this means that iPhoto can not find the data. I already looked into the database and the files are really not there. But I did NOT move them! What happened? What can I do? (I would highly appreciate if I would not have to check every single photo and reimport it again!!!) Thank you in advance for your help!

Restore from your back up.
Regards
TD

IPhone 5 can not delete emails. Will not move to trash folder or empty trash

iPhone 5, I can get mai. I can send mail. I can not delete mail. If i click to send the read mail to trash folder... error ca not move mail to trash folder.
I can move read mail to the trash folder, but can not empty the folder...
HELP

Read this thread https://discussions.apple.com/message/5616151#5616151

HP Color LaserJet Pro MFP M177fw makes horrible noise and will not move past initializing

Makes horrible noise and will not move past initializing.

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

End Routine Issue - It does not move data from E_T_RESULT to RESULT_PACKAGE

Hi,
I am facing an issue with end routine. I have gone through previous posts on, how to write end routine and all.I wrote the end routine accordingly.
Here is my scenario,
I have 0CUST_SALES master data , which has all the Sales Org, Distribution Channel and Division, Sold to Party, Sales Grp and Sales Dist.
I am getting , Sold to party and Distribution channel at the field routine.
I am using, Sold to Party and Dist Channel and Division = '01'- whatever i populated using a field routine and trying to get the Sales Org, Sales Grp and Sales Dist at the end routine.
It looks like, all the code that i wrote seems correct but it does not populate any values into RESULT_PACKAGE.
Here is the code I wote at the end routine. I am not sure, whats wrong in it. I used, this link to write this routine :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/203eb778-461d-2c10-60b3-8a94ee91cbfc&overridelayout=true
Global Declaration----
DATA : BEGIN OF IT_CUST_SALES,
    DIV TYPE /bi0/pcust_sales-DIVISION,
    DIST_CH TYPE /bi0/pcust_sales-DISTR_CHAN,
    SALES_ORG TYPE /bi0/pcust_sales-SALESORG,
    CUST_SAL TYPE /bi0/pcust_sales-CUST_SALES,
    SALESDIST TYPE /bi0/pcust_sales-SALES_DIST,
    SALESGRP TYPE /bi0/pcust_sales-SALES_GRP,
    END OF IT_CUST_SALES.
DATA: T_CUST_SALES LIKE TABLE OF IT_CUST_SALES.
Start of End Routine
   SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from
    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE
    where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
End End Routine
Data comes into E_T_RESULT but it does not move to RESULT_PACKAGE. Any inputs will be helpful.
Regards,
Kumar

Hi Hegde,
Declaration is same , its like this.
   datA: e_s_result type tys_TG_1.
    data: e_t_result type tyt_TG_1.
I don't know, when i inserted this code in this post, initially it was OK but once i post i also saw , its not that read friendly.
FYI, i am trying to put the code again, lets see if it works.
SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE   where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
Regards,
Kumar

My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

Trackpad does not work properly

Audiobook will not move to iTunes... Please help.

Hi,
I am using the ListenAlaska website, this is a legitimate library type of free audiobook rental download website.
I downloaded an audiobook: "The Golden Compass: His Dark Materials Series, Book I" to try this out for the first time.
It successfully downloaded & allows me to listen to it on my computer.
What I really wanted was to put it on my iPod, it only allows rentals for 7 days, so I wanted to do it soon.
I have tried to put it on my iPod through iTunes of course, but I keep getting the same error messages from iTunes, the first saying "One or more of the songs you are adding to iTunes, including "The Golden Compass-Part01.wma", are in the WMA format. iTunes will automatically convert them to the AAC format so that they can be added to your iTunes library."
There are 2 button options to either "Convert" or "Skip".
If I click the "Skip" button the Audiobook does not move to my iTunes.
If I click the "Convert" button the next message says: "The song "The Golden Compass-Part01.wma" could not be converted because it is in protected WMA format.
This error has only one button option that says: "OK".
This doesn't move it to my iTunes either.
I checked the ListenAlaska website for help & found infomation on Publisher's Permissions, & I thought maybe this was not allowed to be put on an Ipod even though it is in the "Ipod Friendly" section.
So I checked in the properties of the audiobook & it says that it is permitted to be on rented an Apple iPod device.
How can I get this to go into my iTunes?
I can't seem to find any other help on the website & it just isn't going onto my iTunes.
Please let me know what I can do.
Thanks very much.

I use this service from my local library, too. Slowly, they are starting to get tracks that will work on iPods because of feedback from library patrons.
I am not sure how ListenAlaska does it, but my library clearly marks which tracks are WMA-protected. I know these will never go onto my ipod. I can only listen to them using Windows Media Player on my PC. There are some tracks that are not WMA-protected, and those I can drag into itunes and put on my iPod. But it's never popular titles ; (
I suggest contacting your library - the more folks who ask for iPod-compatible files, the more likely they are to start getting them. There is now an Overdrive version for Macs, so they are getting there.
edit - Back to your problem, I think those tracks are marked wrong on the ListenAlaska website as being iPod friendly, when they are not.
Message was edited by: Katrina S.

I cannot find videos (not movies) that i have transferred to my macbook pro from an external hard drive, these files used to be on my windows PC!

I cannot find videos (not movies) that i have transferred to my macbook pro from an external hard drive, these files used to be on my windows PC. Photos and a few of the videos came over but i am missing the majority of the videos. Help please!!! I have tried omnidisksweeper with no success in finding them.
in my Usage it says i have over 40 gb of movies when i only have about 9gb which i can see using spotlight search. i really hope the other amount is my missing videos! these are videos of my kids as babies.

Read this post and do the migration again, putting the library in a portable shape first if necessary.
tt2

My kid dropped my iPad 2 and the volume control on the side got jammed in and now everytime my ipad is on the volume icon in the middle of the screen will not go away. I can not move the switch on the side, it is jammed, is there a way to fix it?

My kids dropped my iPad and the volume control on the side got jammed in and it will not move, how can I fix this? Can it be pulled out to unstuck it. The glass got chipped right next to it, but it is not that noticible. Everything else works on the iPad, but the other problem is that I am past my 90 day warrenty and it will cost me $265.00 to have Apple fix it. Is there anyway I can save my iPad?

Your warranty is actually one year - the 90-days is only for free telephone support - but the warranty would not cover damage due to the iPad being dropped. I doubt there's anything you can do to fix the rocker, so you'll probably need to pay to get the iPad exchanged (by Apple) or repaired (by a third party repair service).
Regards.

HT5527 I did not move my Mobileme account to iCloud. How can I get off the iCloud mailing list?

I did not move my Mobileme account to iCloud. How can I get off the iCloud mailing list?

If you migrated your MobileMe account before 1 August you should have signed into System Preferences>iCloud with it, and you would be able to see your calendars, bookmarks and emails on the iCloud website. Is this the case? Did you sign into iCloud with your @me.com address?
If you did not migrate your MobileMe account you can no longer do so.
If you did migrate, did you do so from a full MobileMe account or from a Family Pack sub-account? the latter did not get the complimentary storage (because their iDisks were only 5GB anyway).
If you had a full MobileMe account, check on your Mac - System Preferences>iCloud - and see whether that shows the upgrade. If it doesn't, you probably need to contact Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support (MobileMe Support is no longer available) and you may be asked to pay a fee: in this case you should ask them to deal with it without cost (and hope they agree).
Note that you haven't paid anything for your MobileMe storage since your first renewal date after 6 June 2011, and iCloud costs nothing unless you specifically choose to upgrade the storage. Note also the iCloud storage is not general file storage in the manner of the iDisk but is restricted to iOS device Backup, Mail, Photo Journal and Documents.

Itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

Go to the Edit -> Preferences-> Playback
In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
Thanks,
John

Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.

Use migration assistant to move your files. http://support.apple.com/kb/HT4889

Why does my IMAC super drive recognize data dvd's but not movies?

My 27" Intel Imac recently stopped playing dvd movies. The drive still recognizes data disks but not movies. When I insert a dvd movie the drive makes noises for 30 seconds then eject the disk.

Have you changed region codes on movies? It will only change for a total of 5 codes.
Regards,
Captfred

RENDERS DO NOT MOVE?

Similar Messages

Maybe you are looking for