Renders front view, not camera view in 3D

After Effects CC 2014
I have 1 composition that is rendering the front view instead of the camera view. The camera is on and active. The ram preview is the camera view. This seems to be a bug, and it does not happen to other comps in the project.
Further clues: If I drag the comp into another comp, it will show the camera view, but still render the front view.
If I create a new comp using this comp as the only selection, it will show the front view.
Is there any way to reset the view for render. This is a busy 3D comp that I don't want to re-create. Thanks for any help

Fast Draft seems to be the culprit. Turning on fast draft gives me a different cropping on the active camera, and it is incorrect. This comp's fast draft may have coincidentally looked like it was front view. Sorry for the post.

Similar Messages

JSF Design View broken? Fallback Rendering, "Render Kit" not found

Hi,
I just wanted to toy around with JDeveloper 11g TP3, created a new project, added technology scope JSF (+ JSP/Servlets, etc.) then the tag-library ADF Faces Component 11-ji3.
Then I created a data control from a POJO and wanted to visualize this within a JSF page. So I created one (via faces-config visual editor), dragged the appropriate getter-method to the page in the up-to-this-point working WYSIWYG editor, selected ADF-read-only-form and suddenly found myself in the JSF "alternate rendering" (a view like in an hierachical XML editor). I enabled "design time messages in log" to see what the problem was.
Stopping/Starting JDeveloper or removing tag libraries like suggested in other threads did not work. I was unable to reactivate the wysiwyg editor for this page or any new JSF page in this application, always the "alternate rendering".
Log said "oracle.sql.OraData" was missing, so I added ojdbc6.jar to the project classpath. Didn't help, no wysiwyg editor, log now says:
--- snip ---
18.02.2008 14:12:37 oracle.adfinternal.view.faces.lifecycle.LifecycleImpl _isPostback
WARNUNG: Render Kit konnte nicht gefunden werden
WARNING: A problem was encountered executing the page. Using fallback rendering.
java.lang.NullPointerException
     at org.apache.myfaces.trinidad.util.Service.getService(Service.java:82)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl._getExtendedRenderKitService(ViewHandlerImpl.java:333)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:154)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:633)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:244)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:204)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
--- end ---
I have this error even for newly created (ie blank/HelloWorld) JSF pages in my application. I started adding some libraries, but nothing helped. How do I reactivate the wysiwyg editor?
Thanks!

Frank,
thanks for the reply. I will try what you suggested, but the trinidad-config.xml is actually not missing in my project, although it does not include a render kit definition.
As my first step with 11g I also tried one of the tutorials (http://www.oracle.com/technology/obe/obe11jdev/11/ejb/ejb.html) and there the wysiwyg was working nicely the whole time.
In both cases (my project == not working wysiwyg editor, tutorial == nicely working wysiwyg editor) the content of the trinidad-config.xml is the same:
--- trinidad-config.xml ---
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>blafplus-rich</skin-family>
</trinidad-config>
--- end-of-file ---
Rgds
Axel

My camera on my 4S is only showing working in the reverse mode. The front view shows a black screen. I have room in my storage. Any suggestions?

Why would my camera stop showing the subject to be photographed in "front view" ? Getting a black screen. However it works fine in the "reverse mode"

Something covering the lens?
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Avoid rendering of (view,component Usage embedded on TAB) on Timed Trigger

Hi,
I have a WD application build based on header ( icons; normal label; input elements ) , a timed trigger and a tab strip which has 3 tabs. The 3 tabs have View container element for whcih i am attaching 3 views of the same component . TAB A part which i am viewing holds a image. The Timed Trigger is needed to enable icon on the header. This is happening well after my delay time of 60 SECS. But this one is having impact of regenerating the image again ( due to the rendering ) which is not at all required. I want to have the rendering only for the above header part only. But as i heard from Thomas post that after the phase cycle is done. rendering loads all the views, component usages embedded for the VIEW.
conditonally i am doing the action of CANCEL NAVIGATION in WDDOBEFORENAVIGATION when Timed Trigger fires.Due to this one i could avoid the MODIFYVIEW calls of the respective views embedded; but i could not avoid the rendering of the IMAGE ( TAB A ).
Is there any way to avoid the rendering on those tabs part ( 3 views embedded ). I could see that DELTA rendering is enabled for my sap version but it would be not much help.
Thanks and Regards,
Satish A.

Hi Alex.
I already tried this. But a bit different. One of my component should have different entry views. So I defined multiple interface inbound plugs in the window of the subcomponent. In the corresponding (inbound) handler methods of the window I fired corresponding outbound plugs which were connected to different views. The main component had different links which were connected to the corresponding interface inbound plugs of the embedded component.
When I clicked the first link, the correct view of the subcomponent was shown. When I then clicked the next link which should show another view of the same subcomponent the corresponding inbound handler was called but no navigation was done.
Now when I rest the component before navigating everything works fine.
But thanks for the hint.
Cheers,
Sascha

Vision Assistant Features to Front View

Hi all,
I want to Show the Vision Assitant Features like "Template Editor" in Front View Panel . I am using Labview 12.
How can I achieve this?
Thanks.

It is not possible to show the Vision Assistant as it is in its Configuration Mode while running the VI which contains the VAS.
However you could create your own Template Editor with the Functions provided by the Vision Development Module.
Another question is, why do you want to change the template during runtime?
Christian

My front and back camera won't work, and my flash will not either.

I took some picture in the rain, my iPod 5th gen wasn't affected, then my iPod was dropped in a parking lot and found later. Other than that, nothing has really happened to it, but both the front and back camera do not work. When I open up a camera, it's just black. The flash doesn't work either. Can anyone help me?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Unless you purchased the optional AppleCare+ extended warranty,
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price

Front and rear cameras not working since i reformatted ipad mini. updated version. checked settings could not find how to activate camera. no icon appears.

i've searched and searched but could not find any answer why front and rear camera's aren't working.
i did a reformat because my id would not accept the password that i've been using. then after the reformat i could not see the icon anymore.
went to settings under photos and camera and could not find a button for the camera.
i do not have facetime. it's gone as well. what do i do?

Look under settings, general, restrictions and see if facetime and the camera have been turned off.

IPad 2 front and back camera is not work after update iOS 7.0.4 it gives like the resolution is not adjusted

After updating my ipad 2 to iOS 7.0.4 , front and back camera is not working it gives like very small dots or dash. I did restore from iTunes and reset by holding on the home and sleep button, I also tried to close the app from the task bar but still all trials didn't solve the problem.

I haven't heard of this before so I doubt it's a bug. Probably something happened during the 7.04 download.
Backup your iPhone to iTunes and restore it as a new iphone, then restore from the backup. This will give you a fresh copy of iOS 7.04.

I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

I have the same issue on my iPhone 5s
I've closed the app and re-booted the phone several times but it did not resolve the issue.
Upgrading to iOS 8.0.2 did not resolve it either.
Erasing the iPhone and restoring from a backup did not resolve it.
I'm not sure what else to do.

I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Wil

I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Will this resolve my issue?

any advise..?

Still waiting on Apple to come up with front and back camera for laptop.

The Ipad, Iphone and Ipod have front and back camera. Why can't the laptops have front and back camera? I have a mac pro and it would be great if I don't always have to turn the laptop for people to see what I'm trying to show them.

You would like to be looking at something while using facetime (for
example) and switch over to a different camera while continuing the
conversation without moving the computer. That way you could see what
you are showing them without having to look sideways at the display.
So basically he wants a rear view camera.
There is a issue with this because computers are stationary and thus the rear view camera could be used as a covert monitoring device.
At least with a iPod or iPhone when someone holds it a certain way you know they are taking a video or picture, with a desktop/laptop one wouldn't know.
For instance say your a pretty girl in coffee shop using your laptop, so now instead of a bunch of rabid geeks trying to catch your eye you have all their laptop rear view cameras pointed at your direction and streaming it online.
Creepy.
If one wants a rear view camera, buy a third party one and mount it on the top. It comes with a swivel base and thus can be pointed at any direction. Thus people can see your video recording and it's not covert.
A rear mounted camera requires the entire Mac to be moved, which in the case of a large iMac is impracticable. Laptops being moved increasing their chances of being damaged, even more so if they have hard drives.
Also there are laws about covert video recording/taping in many States and countries, you have to do so with the persons consent so things are not taken out of context.
I'll have to vote no on this, especially since not many people will use it and we will all have to pay for it.

Snap position object in front of active camera

I cannot find this function so please let me know if I am just missing it - but it has occurred to me that it would be very handy to have the ability to align any given opblect in front of the currently active camera.
If a camera Moves throughout a scene and you suddenly want to duplicate an element that is elsewhere in a scene, if you duplicate it, it s duplicated in place. Is there a way to "snap position" an object existing in a scene in front of a camera?

Why would I first need to set the origin of the camera to the center of the scene before cutting if the camera i want the object in front of it elsewhere in the scene.
You don't have to reset the camera, just the duplicated object. If you reset the camera, you'd loose any animation settings you might have.
Am I to understand that Motion 5 just defaults to placing a cut and pasted object in front of a camera only if it's transforms are reset? That seems kind of arbitrary.
I don't know that it's arbitrary, it seems to be related to this (from the motion documentation):
Drag and Drop onto the Canvas
Dragging and dropping an object onto the Canvas adds the object to the scene at the focal plane of the current camera. Dragging an object into the Layers list or clicking the Apply button in the preview area of the File Browser positions the object at 0, 0, 0.
Basically, depending on how you add objects, motion determines where to place them in the scene. This seems to be the case for copy and paste too. Copy and paste includes all of the transformations already applied to the object. The paste treats your camera focal plane like the origin for the scene, but your object has it's own transforms, that's how it gets offset from the camera focal plane. Resetting the object to the origin removes those settings and works like using the apply button mentioned in the documentation.
Here's an example to show what I'm talking about.
1.Add a camera and rotate it, make sure you can see the origin for the grid.
2. Add a shape from the library using the apply button in the inspector.
-The shape gets added at the origin, not at the camera view.
3. Reposition the camera, make sure to change the position and rotation.
4. Add the shape but this time drag and drop to the canvas.
-Notice how the shape is at the focal plane of the camera. If you look at it's settings they match what is needed to position the object at the camera's focal plane.
5. Reposition the camera one more time.
6. Now Copy and past each object while in the active camera view.
-When you copy and past the object at the origin, it's pasted at the focal plane because it doesn't have any transforms.
-When you copy and paste that was added from the drag and drop, it's offset, it's transforms have been added to the camera focal plane transformation.
You may also want to review the section in the documentation about Relative coordinates.
-Cheers

What do i do if my iphone 4 front and back camera doesn't work

what do i do if my iphone 4 front and back camera doesn't work

gordonw26 wrote:
Do you have a crack in the screen
What does this have to do with the camera not working?

Front and back cameras stopped working after IOS 8 update

My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?

Hi VictoriaViking,
Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article. (I know some don't apply to your issue.)
iPhone: Hardware troubleshooting
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Take care,
Nubz

How much does it cost to replace a iPod touch 5g. the screen is completely broke and digitiser and theres no front and back camera??

how much does it cost to replace a iPod touch 5g. the screen is completely broke and digitiser and theres no front and back camera??

Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours. Note the older 16 GB 5G has only a front camera and the other 5Gs (16 GB released late last month and the 32 and 64 GB 5Gs have both front and back cameras)
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit
Identifying iPod models

Renders front view, not camera view in 3D

Similar Messages

Maybe you are looking for