Rending problem - "not found!"

When I rendered my sequences with FCP 7, at the end of long time as 2 or 3 hours rendering time,
the message "Not Found!" appeared and I failed rendering. If I render the same sequences again, the same thing happens.
Please let me know why this thing happens and how I can solve this problem.
My sequences are usually more or less 1 hour long.
Last night I didn't sleep at all.
Rending and failure, rendering and failure...
So I rendered the sequence by manually selecting 5 minutes portions so many times in one sequence and at last done.
Please help me about this problem.
Jaehyun from Korea

Why are you rendering? If it is because the material does not match the sequence settings, you should correct that first (then you won't need to render).
If the material is H.264, AVCHD or similar non-native FCP formats, convert them to ProRes (LT is fine for most consumer formats) before you bring the material into FCP.
Either Compressor or Mpeg Streamclip are the standard apps for this purpose.
x

Similar Messages

Trying to render, get "Not Found" mesages

Seems like I've had this problem years ago, but I can't remember what caused it.
I have a section with 3 video tracks, 2 of which are nested sequences. When I try to render, it will render a portion of it if I hit "cancel", but if I try to render the whole section there is a message that says "not found" and nothing else was rendered.
I also saw "General Error" once or twice.
Any idea how I can fix this?

What format are you sources and what are your sequence settings? I assume your nests' settings match the containing sequence (but if not, let us know).
You might try rendering within the nest and see if that's successful.

Export / Render error - "Not found"

Hello all,
A new, frustrating problem came up today. I opened an old FCP project and tried to Export the Timeline (Export > QuickTime Movie). About halfway through exporting, the progress bar disappeared, and an error dialogue popped up. All it said was, "Not found." No specifics about what was "not found," though.
I tried to re-Render the whole timeline (it was fully rendered upon opening the Project) and again got the "Not found" error, halfway through rendering.
I checked the Timeline and the Browser for offline files, but everything that is used in my Timeline appears to be online. I tried to Export the movie both as a Self-Contained File, and not, with the same results.
I even quit FCP and restarted the computer, to no avail.
Can anyone offer advice on what else I should try?
Thank you for your help!
Dual 2 GHz Power PC G5 Mac OS X (10.4.6) 1 GB DDR2 SDRAM

Try FCP rescue. It is a free download. Also update software, rebuild permissions with disk utility, run MacJanitor (also a free download), Reset PRAM. Ensure you have enough free space on the volume you are rendering to.
Can you play the sequence through without any drpooed frames or errors? These might give you a clue a sto where the problem is in your time line. Rarely video files get corrupted and need to be recaptured.
Can you print to video? Errors here can also give you clues to problems.
Hope this helps.
Dave F

JSF Design View broken? Fallback Rendering, "Render Kit" not found

Hi,
I just wanted to toy around with JDeveloper 11g TP3, created a new project, added technology scope JSF (+ JSP/Servlets, etc.) then the tag-library ADF Faces Component 11-ji3.
Then I created a data control from a POJO and wanted to visualize this within a JSF page. So I created one (via faces-config visual editor), dragged the appropriate getter-method to the page in the up-to-this-point working WYSIWYG editor, selected ADF-read-only-form and suddenly found myself in the JSF "alternate rendering" (a view like in an hierachical XML editor). I enabled "design time messages in log" to see what the problem was.
Stopping/Starting JDeveloper or removing tag libraries like suggested in other threads did not work. I was unable to reactivate the wysiwyg editor for this page or any new JSF page in this application, always the "alternate rendering".
Log said "oracle.sql.OraData" was missing, so I added ojdbc6.jar to the project classpath. Didn't help, no wysiwyg editor, log now says:
--- snip ---
18.02.2008 14:12:37 oracle.adfinternal.view.faces.lifecycle.LifecycleImpl _isPostback
WARNUNG: Render Kit konnte nicht gefunden werden
WARNING: A problem was encountered executing the page. Using fallback rendering.
java.lang.NullPointerException
     at org.apache.myfaces.trinidad.util.Service.getService(Service.java:82)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl._getExtendedRenderKitService(ViewHandlerImpl.java:333)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:154)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:633)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:244)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:204)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
--- end ---
I have this error even for newly created (ie blank/HelloWorld) JSF pages in my application. I started adding some libraries, but nothing helped. How do I reactivate the wysiwyg editor?
Thanks!

Frank,
thanks for the reply. I will try what you suggested, but the trinidad-config.xml is actually not missing in my project, although it does not include a render kit definition.
As my first step with 11g I also tried one of the tutorials (http://www.oracle.com/technology/obe/obe11jdev/11/ejb/ejb.html) and there the wysiwyg was working nicely the whole time.
In both cases (my project == not working wysiwyg editor, tutorial == nicely working wysiwyg editor) the content of the trinidad-config.xml is the same:
--- trinidad-config.xml ---
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>blafplus-rich</skin-family>
</trinidad-config>
--- end-of-file ---
Rgds
Axel

Does Tiger present Classic problems not found in Panther?

I have been running various old OS9 apps via Classic under 10.3.6 without any apparent problems.
I may now need to run them on a laptop with Classic under 10.4.
I have heard that some problems are presented with certain Classic apps in Tiger that are OK in Panther. Is this the case? If so does anyone know which apps are problematic in Tiger?
I would be particularly concerned about Adobe Photoshop 5.0 LE.
Thanks,
Michael
G4 733 512 MB Mac OS 9.2.x

Barbara,
I'm resurrecting this thread because of an associated problem, albeit not to do with Classic but with OSX.
The point isn't so much 'what doesn't it do?' as does it give me anything I need. However I downloaded the Earthbound Light effects and used Curves from there in PSE2 without problems in OS9 (although nowhere near as conveniently as in PSLE5).
But moving to OS 10.4 has presented a problem in that the Earthbound Light folder shows up in the Effects tab, but there is nothing in it. I have given full details in a question in the Adobe Forums at http://www.adobeforums.com/cgi-bin/webx/.3bc1e270 and would be grateful if you could spare the time to look at it.
Michael

Ipod battery charging problem not found in any posts

OK here's the problem
The battery meter on my 5g flashes that charging symbol, even when it's not plugged in the wall.
And sometimes when I use my friends griffin charger it charges and than stays on the charged symbol even after I unplug it.
Also my apple charger doesn't work at all (not just mine, I borrowed my friends and it doesnt either work).
Also when I plug into the computer it mounts but doesn't charge.
OK I'll tell you what I did so far: I read ALL of apples related battery documents. I restored. I depleted the battery and recharged it. I bought a new cable.
I used my friends computer. I used the back USB port. Nothing is helping the ipod.
By the way I know for a fact that this all started when one time i did actually use the front usb port. It sort of jinxed the whole battery meter into it's current state. Any one with this problem? Any help will be appreciated. Thanks

Welcome to Apple Discussions!
If you have done these...
Resetting iPod
Restore the iPod
And the problem persists, the iPod may need service.
btabz

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

"File not found" error when I try to render an animated menu (on mac) Encore CS4

I'm making a dvd with at least 2 animated menus. It means that I have a 1 movie in the background of each menu. Over my background, I have 3 thumbnail buttons which contain a small piece of movie animated movie too. When I try to to view my menus, in order to see the animation in the background and in the thumbnails I need to render the animation through File - Render - Motion menus.
The problem is that it works for the first menu but then when I continue my navigation to the second menu that has animation in background and thumbnails too, if I choose Render Motion menus,after 3/4 of the rendering it says "file not found" even if all the files are well in place in their folders.
Does anyone would have an idea of how to resolve this stupid problem that prevents me to burn my project on a DVD since the same errors will appear during the burning process (I use a mac with Encore CS4). Is it a bug? What are the solutions? Thanks for answering.
Steven.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." And I have no idea of where or how to fix this issue. Any help or suggestions will be greatly appreciated. I even tried to deauthorize this computer and got the same error message. HELP!

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

"Not Found" Error Message Problem

Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
Emily

They were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help!

Codec Not Found error when trying to render/export layered sequence

I have a sequence that I never had problems with in the past but as of yesterday when I open the project and try to render or export. I get the infamous dialogue box saying, "Codec not found. You may be using a compression type without the corresponding hardware card."
I've narrowed it down to only being a problem wherever I have two particular types of media clips layered one on top of the other. In this case it is occurring wherever I have an Apple ProRes 422 (HQ) clip layered with an Animation codec clip containing a graphical bug that was created in After Effects and exported as a Quicktime Movie with RGB+Alpha. Because of the Alpha channel in the bug clip, it is automatically given the Animation codec upon export from After Effects to retain and preserve the transparency needed. I've also narrowed it down to only occurring when all this is combined on a sequence with its compressor set to standard ProRes 422 or ProRes HQ. If I set it to any other codec, such as any DV/DVC Pro or MPEG IMX codec then I can render and export again.
Also interesting is that I can nest the sequence into another sequence and render and export just fine as well, even with it set to either ProRes codec (which will probably prove to be a suitable workaround for the time being), however, any additional insight into this issue that anyone can provide, pertaining to what may have changed or caused my original sequence to suddenly not want to render anymore would be greatly appreciated.
And if anyone else reading this comes across this this same type of problem themselves, then I suggest what I just got to work: Duplicate your sequence, then delete the clips from the new sequence and nest the original sequence into it.
Here is some additional background info if desired:
I'm using FCP 6.0.6. The sequence I have going here is set to Apple ProRes 422 and consists entirely of Quicktime Movie files. Video Track 1 has the main video clips using the ProRes HQ codec (Again, even with the sequence set to ProRes HQ, it doesn't make any difference here). Track 2 has a graphic bug that was created in After Effects and layered over the Track 1 clips at various places. I was able to work with these clips and render as well as export the sequence with no problems last week. However, I was requested to revise the bug in After Effects, and then replace the old bug with new bug and export the sequence again. So yesterday, I simply opened up the After Effects project file for the bug, made the revisions and exported it with a new name using the same settings as the previous bug. The render problem I'm now facing surfaced right when I opened the FCP project file yesterday, before even importing and replacing the old bug with the new bug. I went ahead and imported the new bug and placed it in place of where the old bug occurred. But the render and problem remained. On this particular problem sequence, I can render the new bug if I actually disable or remove the ProRes clip beneath it, but I cannot in turn render the ProRes clip after disabling/removing the Animation clip above it.
Now, I can copy either type of clip into their own sequence allowing the clips' respective native settings (ProRes HQ & Animation) to take effect and then they will playback and export just fine. I can even copy the bug clip (Animation codec) and paste it into the other clip's ProRes HQ sequence and it will render and export just fine from there as long as it is placed next to the other clip and not layered over it. On these newer sequences, it is only when the bug (Animation) clip is layered over the ProRes HQ clip with the sequence set to ProRes or ProRes HQ do I tend to still get the "Codec not found" error.
I've also tried the following steps to try and troubleshoot to no avail:
1. Copied entire sequence into a new sequence. Problem still occurs.
2. Closed FCP, trashed preferences, and restarted FCP. Problem still not resolved.
3. Opened project on another computer, had same problem.

Thanks for sharing these ideas about dealing with this error message.
For what it's worth, I finally managed to solve a similar issue by going into sequence settings, choosing the Video Processing tab, and changing Render 10-bit YUV to Render 8-bit YUV.
Maybe this helps someone?

Crystal report problem in add-on(CrystalDecessions.Crystal Engine not found

HI All,
i am having a problem with crystal report not opening.
what is the solution to run the add-on it i ssaying that Crytsal Engine 10.5.3700.0 is not found in assenmly or specified path.
how can i resolve this error. do i need to add some file while creating the add-on.If so what i have to add.
Please help me.
Thanks & Regards
omprakash

hi,
Check this thead
Problem with Crystal reports deisgner
Jeyakanthan

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. I get a message on my phone that says " the URL you are requesting is not found on this server". Pics and videos have been deleted too.

I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play. I get a message on my phone that says " the URL you are requesting is not found on this server". I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted. I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either. Is there someway to get the videos to play on my phone again? Make the photos not as blurry as they are now and to restore the pics and videos that have been lost? I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be. Please help if you can.

I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
Need help too!!

Problem with Home Sharing. Getting the error "The Requested URL was not Found on this Server"

I recently purchased an iPhone 5. As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing. My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake. All of these videos work fine on all devices in my home except my new iPhone 5. When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
Does anyone have any ideas as to what's going on?

Can you see if you can view index page from a browser on iPhone.
Have you seen live streams working from a different computer...
if not then check if a proper crossdomain.xml file in its place(webroot folder).

Rending problem - "not found!"

Similar Messages

Maybe you are looking for