Renew Business Connector certificate

A certificate in T-Code STRUST is ended and now I want to renew it.
How can I renew a Certificate from the business connector and include it into t-code STRUST?
Edited by: Damian Reiner on Jan 19, 2012 11:05 AM

There is a report in sap in which you can create the ticket

Similar Messages

SAP Business Connector certificate problem

We are trying trying to send data from SAP to bank via SAP business connector using bank URL. We have configured the certificates in SAP BC which are authenticated by bank on the basis of private key generated from our server. Now when we trying to post data to bank it is giving below error.
java.lang.RuntimeException: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by TrustDecider
Any idea? Please give me some suggestions to resole this problem.
Thanks and Regards

Normally I do not like to give documentation references, but in this case I think it makes sense. Certificate handling is an ugly and complicated topic, so many things can go wrong. Please check the SAP BC 4.7 Administration Guide, page 103 onwards ("Securing communications with the server"). It explains very well what needs to be done. Make sure you configured everything correctly.
CSY

Business Connector 4.7 SSL configuration

HI,
I am configuring SSL in Business Connector 4.7 (to use HTTPS using digital certificates).
I am following the admin guide.
I finished the first step - Configuring the Server to Use SSL.
The next step is to import the client certificate and map it with a user.
My query is that , how can i get a client certificate.
Could anyone please suggest me.
Also, does any one has step by step configuration of SAP BC for SSL.
Regards,
Kuna

Hi,
You should be getting the certificates from the client (where you got the URL from), for example if you are trying to connect your BC to SAP using SSL, you should get the certificates from SAP and install them in BC for communication.
thanks...
Karna....

Business Connector Client Authentication

Hi everyone,
any Business Connector Experts among us?
Does anyone know how the Client Authentication of the BC works? And how I can switch client certificates off?
My problem is:
A BC conencts as SSL Client to a reverse Proxy, and right after they make their handshake, some bad certificate seems to arrive at the proxy, which does not support SSL Client Authentication.
Thanks in advance and best regards,
Jochen

Bump

Com.wm.app.b2b.server.ServiceException with Business Connector

Hi Everybody,
I could need some help with the Business Connctor 4.8...
We just made an upgrade from SAP Business Connector 4.7 to 4.8. The new Business Connector also was moved to another server.
The installation was fine. In SM59 the RFC test works and also the MAPS are all in green status.The routing should also be fine.
I have the following problem when using the FM IDOC_INBOUND_ASYNCHRONOUS to send invoices to the customers I get the following error:
com.wm.app.b2b.server.ServiceException: com.wm.app.b2b.server.UnknownServiceException: [B2BSERV.0026.9201] Unknown service: wm.PartnerMgr.flows.MANDANT001.1STBP:INVOIC
I also created and imported the necessary certificates to communicate with our partner by https.
Please could you help? Is it a problem in the configuration or do I miss something with the certificates?
Thanks in advance!
Kind regards,
Lu Huynh

Hi Lu,
Yes that note was for SPA BC 4.7. I though it could provide you with some more insight.
Anyway, can you recheck whether the settings which you have done for IDoc in SAP BC. There might be some problem with them.
Also check this thread, it might be helpful (but i am not sure)
[B2BSERV.0026.9201] Unknown service: wm.PartnerMgr
One doubt the error message says Unknown service: wm.PartnerMgr.flows.MANDANT001.. IS the client 001?
Regards
Suraj

SAP Business Connector on Windows XP

I've been trying to get the SAP Business Connector 4.7 to work on Windows XP professional but haven't been very successful. The business connector seems to install okay, but when I try to start the business connector through the server.bat file it generates the following errors:
(loglevel = 4)
Loading WmPartners package
00000E [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.EmailTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.EmailTransport
00000F [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:saveMessage: [B2BSERV.0026.9106] No method saveMessage in class wm.PartnerMgr.xtn.admin
000010 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:view: [B2BSERV.0026.9106] No method view in class wm.PartnerMgr.xtn.admin
000011 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:saveRoutingRule: [B2BSERV.0026.9106] No method saveRoutingRule in class wm.PartnerMgr.gateway.admin
000012 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:convertWildCards: [B2BSERV.0026.9106] No method convertWildCards in class wm.PartnerMgr.gateway.admin
000013 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.B2B:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.B2B
000014 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:editStore: [B2BSERV.0026.9106] No method editStore in class wm.PartnerMgr.xtn.admin
000015 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.FTPTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.FTPTransport
000016 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:invokeViewService: [B2BSERV.0026.9106] No method invokeViewService in class wm.PartnerMgr.xtn.admin
000017 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:viewMsgContent: [B2BSERV.0026.9106] No method viewMsgContent in class wm.PartnerMgr.xtn.admin
000018 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:updateTransports: [B2BSERV.0026.9106] No method updateTransports in class wm.PartnerMgr.gateway.admin
000019 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:invokeService: [B2BSERV.0026.9106] No method invokeService in class wm.PartnerMgr.gateway.admin
00001A [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:log: [B2BSERV.0026.9106] No method log in class wm.PartnerMgr.xtn.admin
00001B [B2BSERV.0028.0005] Loading SAP package
00001C [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.RFC:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.RFC
00001D [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.BAPI:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.BAPI
00001E [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.XML:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.XML
00001F [B2BSERV.0026.0002] Failure while loading service sap.bapi:encodeToFile: [B2BSERV.0026.9106] No method encodeToFile in class com.wm.pkg.sap.bapi.BusinessDocumentCoder
000020 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2rfc: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000021 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:rfc2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000022 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2ale: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000023 [B2BSERV.0026.0002] Failure while loading service sap.admin:listGatewayServices: [B2BSERV.0026.9106] No method listGatewayServices in class sap.admin
000024 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:ale2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000025 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.ALE:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.ALE
000026 [B2BSERV.0028.0005] Loading WmSamples package
000027 [B2BSERV.0028.0026] Warning: Deprecated service type (webtap) in service sample.webtap:logApp in package WmSamples
000028 [B2BSERV.0028.0005] Loading WmDB package
These errors don't stop the business connector from starting up, but the errors are not normal behaviour. When I try to start the business connector through a Windows service then I get the message "Could not start the SAP Business Connector Service on Local Computer. Error 126: The specified module could not be found".
I have a working business connector installation on a Windows 2000 server, and when I checked the error log of that installation I noticed that it had logged the same errors about the 'WmPartners' package. It on the other hand didn't have any problems loading the 'SAP' package.
I tried installing the business connector on two different systems with identical results. Has anybody been able to get the business connector to work on Windows XP?

HI,
I have no idea clearly about BC.. but ..
See the following links.. may be helpfull..
Business connector
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8609b90-0201-0010-c6bc-a41b611c6dac
SAP Business Connector on Windows XP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92e5bd90-0201-0010-b799-dfdc27f3100a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
If usefull .. points rewarded..
Regards
Chilla..

How do we Integratet SAP to Non-SAP Using Business Connector

Hi Experts,
I am new to SAP Business Connector !!
and what are the Forms ? for SAP Business Connector Related Postings ??
!! I have a requirement to integrate sap to non-sap with Business Connector !!
We need to Generate the SAP Data In xml Format ? and the Non-sap System can Understand Only XML Formated data.
Is there any way Business Connector Box can Pull the XML file from R/3 Application Server and store the file in the Business Connector Server. from that How do we Sent XML file to Non-sap. How do we Integrate ??
what transaction code will trigger this event ? I mean is ther any SAP Transaction Code to Integrate Business Connector?
For Eg. like in R/3 SD to FICO and MM Integration.
Please Give your Valuable Suggests..
Thanks .
Upender.

Hi,
It is not an issue, It will be a separate project :-).
The right forums for this,
Expert Forums » SAP NetWeaver » Process Integration
www.wmusers.com
Also go through the following links:
http://www.sapgenie.com/interfaces/businessconnector.htm
http://www.sapgenie.com/mysap/bus_connector.htm
/people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
https://websmp104.sap-ag.de/connectors
Thanks and Regards,
Chandra Madapati

Problem establishing Business Connector 4.8 and R/3 connection

Hello,
I'm currently running a few SAP Business Connectors 4.7 servers for my company, all connected to SAP R/3 4.7 backend, and everything works fine.
I tried to setup the new BC 4.8, on a fresh Windows 2003 server, the install went fine, but when I try to make a new R/3 connection, with a working and existing RFC user (previously used by the former BC 4.7), I have the following error message :
Error : class com.sap.conn.jco.JCoRuntimeException
Message : Name or password is incorrect. Please re-enter on 192.168.0.4 sysnr 00
Service : sap.admin.server:getInfo
I don't understand because if I unplug the 4.8 server and plug back the 4.7 one with exactly SAME user/password and same R/3 connection properties, it works fine...
I precise I re-typed manually the login/passwords in both BCs to ensure it's not due to a typo error.
I have read that JCO has changed between 4.7 and 4.8 releases. Could it have an impact ? Also do I still need to install a librfc32.dll in my windows/system32 directory ?
Any clues ?
Thanks in advance for your help
P.
Edited by: Patrick TOURNEUR on Jul 21, 2008 6:40 PM

Hello,
just for your info, the JCo implementation has changed about this login function. BC 4.8 is using JCo 3, 4.7 used JCo 2.
I never understood the whole problem completely, but as you found out by yourself, you are safe if you enter the user/pwd in SAP only uppercase, and also in BC
SAP changed this user/login up/lowcase stuff at some time, which has caused many trouble in projects.
CSY

NULL Value in SAP Business Connector (BC47_CoreFix7 )

Dear All,
I am working with SAP Business Connector and some times i get NULL value in (PROXY SERVER) in Secure Proxy (HTTPS) so i need usualy to remove it manully and save the changes.
Would you plesae help me to solve this issue either to delete automatically or to have any idea to prevent getting this NULL value.
Thanks in advance..
Message was edited by: Hassan Hakeem

Dear,
i need the answer ASAP pleasssssssssssse.
Thanks..
Message was edited by: Hassan Hakeem

RFC Error while trying to access function module from business connector

Hi,
I am getting the following RFc exceptions in BC server when we invoke the service pub.sap.client:invoke fail as a flow step in Idoc_Status_Add(this service is calling a function module in sap namely ZYBC_IDOC_STATUS_ADD_FROM_BC which Adds status to Idoc (from Business Connector).But no trace of failures are recorded in sap side
except 1: rfc_failure in BC trace files under monitoring.I need to know the root cause of these errors as the same services have run finely later and IDOCs were also processed successfully without any problem.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: See RFC trace file or SAP system log for more details
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1217)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3684)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3129)
at com.wm.pkg.sap.rfc.SAPSession.invoke(SAPSession.java:437)
at pub.sap.client.invoke(client.java:297)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
could anyone throw light on how this kind of error can be resolved and why it occured?
Thanks.

What does the RFC trace file and log say? Has there been any dump on the SAP server? Check the logs and transaction st22 in your SAP system to see if the RFC-module has dumped.
My guess is the problem is in the RFC-module, I think you should start looking there.
regards,
Dionisios

Flat File Transfer from SAP R/3 4.7 to SAP Business Connector 4.8

Hi Experts,
I have a requirement of transferring a flat file from my R/3 SAP 4.7 Box Application Server to the Business Connector 4.8 Box. I am new to SAP Business Connector and I am not to sure whether FTP works if I use a shell script in SAP R/3. Also, is there any way Business Connector Box can pull the file from R/3 Application Server and store the file in the Business Connector Server.
Any help will be appreciated!!!
Regards,
Subhhrangsu

Hi,
There are many ways thru which you can pass document to SAP BC:
You can HTTP, FTP, Email document to SAP BC.
SAP BC has predefined services for all of them.
For FTP document to SAP BC:
1 Initiate an FTP session on SAP BC Serveru2019s FTP listening port ( this can be found out from SAP BC administrator or from SAP BC homepage).
2 Point to the directory that contains the service to which you want to pass the XML
document.
Example cd \ns\Purchasing\SubmitOrder
3 Copy the XML document to this directory using the following command:
put XMLDoc.xml
Where XMLDoc.xml is the name of the file that you want to pass to SAP BC Server.
Example put PurchaseOrder.xml
Above code can be written in a batch file and you can schedule it to run at interval of minutes.
You can write java client program as well to upload file and map it to String variable of Flow service of SAP BC.
As Micheal said, you can look at sapbc/Developer/doc folder to look for more options.
Best Regards,
Divyesh

Pipeline concept in Business connector

Hi All,
I am working in Business connector 4.7, but I am finding tough to understand the SAP BC pipeline concept of defining java like services in BC.
Basically I do not have experience of Java programming and I work on pure SAP ABAP programming.
Please can any one help if they have some documents on it.
Appreciate your great help.
Thanks in advance.

Hi,
A set of services to be performed in a fixed sequence on a message.
A pipeline consists of pipeline elements that are linked to pipeline services
You have to write a java service which takes that particular pipeline
variable and writes to the file. Then in your pub.client.SMTP service you
have to specify that particular file path for attachment.
Refer
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
www.b41425.info/work/publications/_binary/3%20BC%20Application%20Development.ppt -
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e29161d3-0401-0010-3495-8593de5f5da6
http://www.techboy.co.uk/misc%5CSAP%20Business%20Connector%5C4.7%5CBusiness%20Connector%5COfficial%20SAP%20Documentation/SAP%20BC%204.7%20Adapter%20Guide%20-%20SAPBCSapAdapterGuide.pdf
Thanks
Swarup

RFC function callls a SAP Business Connector Flow - only upper case

Hi everybody,
I wrote a function in SE37 which is calling a Flow in SAP Business Connector.
R/3 and SAP BC, both are Non Unicode systems.
The export parameter is TYPE makt-maktx.
The call to SAP BC works fine. Only all the text I can see in the pipeline of SAP BC is upper case.
I checked wether the domain of the makt-maktx allows case sensitive texts.
This is OK.
I have no idea how I can tell SAP BC to receive case sensitive texts.
I checked the forums. Seems nobody had such a problem.
Can somebyody help?
Best regards
Jochen
Hi to all,
it was not the JAVA Version, or a bug or whatelse.
I just ingnored while testing in SE37 that there is
a Flag [X] case sensitive - That's all!
Shame on me!
Greetings Joe
Message was edited by:
Jochen Seeliger

Hi Priya
Seeing the messages, it appears that server is down.
"java.net.ConnectException" occurs whenever you try to connect to a system which is not up and running.
cheers
Sameer
PS: Please award points if you find the answer useful

Forwarding XML/EDI from SAP Business connector to EDI (cloverleaf)

Hello,
We are having issues setting SAP up to work with the business connector and our EDI system - cloverleaf.
For testing, we would like to:
1. Create an idoc in SAP and send it to the Busness Connector.
2. Have the busness connector send the doc via XML to our EDI system cloverleaf.
Currently, I have things setup like so:
SAP/ECC6:
SM59: RFC setup as type T and works fine.
WE20: Partner Type LS:
I have 2 message types setup (in outboard: I have "orders" and in Inbound I have the same).
in WE21: I have a cloverleaf (our EDI system) to run with the RFC destination I setup in SM59.
On the Business connector, I have the following under routing rules:
From SAP to the Business connector:
Sender: 8805
Reciver: 10000000008
Message Type: Orders
ACL Group: none
Package: default
Main Flow Services: wm.PartnerMgr.flows.88605.1000000008:ORDERS
Transport: ALE (R3/IDOC)
SAP destination: RD1 (our sid).
FOR my outgoing to our EDI system cloverleaf:
I am using the sender: * - Not sure if this should be SAP or the BC.
Reciver: * - Our EDI system. our EDI system is listening on port 49001.
Message Type: Orders
Under URL (not sure about this one)
I have http://reg2lxap0725:5555/MessagingSystem/receive/BcAdapter/BC
I am however stummped on how the URL shold look..
Now, when we test the above config... I recive the following results in WE02.
0000000000003024 25 03 Green Light: IDoc Successful Green LS/ /SAPBC ORDERS05 ORDERS Outbox CLOVERLEAF
For some reason, we also have an "inbound" that fails.
0000000000003025 25 56 Red Light: IDoc Has Errors KU/ /0000088605 ORDERS05 ORDERS Inbox SAPRD1
My main question is however around routing...
We are trying to send these to our EDI system which is listening on 49001.
I am not sure how they want us to setup the routing rules to pass this over to the right port..
I have also searched the documentation, and have not found any real step by step guides, so I may be missing a few things..
Any advice to point me to the right direction is greatly appriciated....
Thanks everyone,
Richard

Hello Prateek,
Thank you very much for your answer. The AdapterGuide was really helpfull.
Now the routing rule is associated to the correct Service (that was a the problem). So the rule started to process the XML files from the folder (the XML files disappeared immediately after I corrected the rule).
But now my problem is that on the SAP side there is no inbound IDOCs so it seems the trasmission may failed.
Moreover under "Routing"-->"Transactions" I don't see these entries with the the current date.
Our routing rule is simple: "wildcard" "wildcard" "wildcard" "ALE (R/3 IDOC)"--><OUR SAP SYSTEM>
The SAP connection is working as I can test under "SAP..." menu.
Is there any other way to monitor what had happened with these XML files? I'm sure the BC processed as the files are gone, but there is no IDOC in the destination SAP...
Thanks a lot!

Error message when calling a Business Connector RFC destination from SRM

Hello all,
We are facing one problem with data Purchase Order transmission between SRM 5.0 (SRM_SERVER 5.5, extended classic scenario) and Business Connector 4.7.
We made needed customizing in order to have "XML / XI" output medium available in tab 'Company Data' in "Manage Business Partners" web transaction (by updating BBP_USE_AI table in SM30 transaction).
Then, we implemented BAdI definition BBP_EBPXML_OUT_BADI with method PURCHASEORDER in order to change XI system type to Business Connector.
In this way, PO transfer data between SRM and BC is done using BC Module Function BAPI_POEC_XML_SEND (TCP/IP RFC connection was defined for Purchase Order in BBPC_RFCDEST table).
Nevertheless, even if method BBP_PO_SEND_XML is correctly triggered when PO is created with a vendor with XML output medium, we have in the document output log ("Process Purchase Order" web transaction) an error message:
' Error (Unknown Partner and Message Type. Routing Rule created. Sender: SMR Receiver:) when calling RFC destination BC '
where SRM is the SRM log. sys. and BC the Business Connector log. sys.
Our EAI team is working on it, but if you have any idea, your are welcome !
Thank you in advance.
Regards.
Laurent

Hello Christian,
Thank you for your help. However, we abandoned this solution between SRM and Business Connector.
So, we followed instructions indicated in OSS note 883693 - "ECS: PO output determination in R/3".
Nevertheless, in order to restrict this behaviour for specific vendors and purchasing organizations, we added some filters.
It is working fine.
However, when the PO is modified in SRM, then order again, PO is modified in R/3 (by the RFC user from SRM) more than once.
As a consequence, we have as much messages as modifications of the order in R/3 (due to multiple RFC access with the SRM RFC user).
Does anybody have an idea to have only one R/3 output message when the PO is modified in SRM ?
One solution could be to check in the NAST table if the time creation of the last output message is lower than, for example, one minute.
If it is the case, we do not allow R/3 ouput message.
Any suggestions is welcome.
Regards.
Laurent.

Renew Business Connector certificate

Similar Messages

Maybe you are looking for